From b2c17d4b5051b915914b44572f92c0c1774539bb Mon Sep 17 00:00:00 2001 From: Pixel Date: Sat, 10 Nov 2001 13:36:08 +0000 Subject: Cleaning --- doc/messages | 929 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 929 insertions(+) create mode 100644 doc/messages (limited to 'doc/messages') diff --git a/doc/messages b/doc/messages new file mode 100644 index 0000000..7c4d80c --- /dev/null +++ b/doc/messages @@ -0,0 +1,929 @@ + 001 RPL_WELCOME + "Welcome to the Internet Relay Network + !@" + 002 RPL_YOURHOST + "Your host is , running version " + 003 RPL_CREATED + "This server was created " + 004 RPL_MYINFO + " + " + + - The server sends Replies 001 to 004 to a user upon + successful registration. + + + + +Kalt Informational [Page 43] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 005 RPL_BOUNCE + "Try server , port " + + - Sent by the server to a user to suggest an alternative + server. This is often used when the connection is + refused because the server is already full. + + 302 RPL_USERHOST + ":*1 *( " " )" + + - Reply format used by USERHOST to list replies to + the query list. The reply string is composed as + follows: + + reply = nickname [ "*" ] "=" ( "+" / "-" ) hostname + + The '*' indicates whether the client has registered + as an Operator. The '-' or '+' characters represent + whether the client has set an AWAY message or not + respectively. + + 303 RPL_ISON + ":*1 *( " " )" + + - Reply format used by ISON to list replies to the + query list. + + 301 RPL_AWAY + " :" + 305 RPL_UNAWAY + ":You are no longer marked as being away" + 306 RPL_NOWAWAY + ":You have been marked as being away" + + - These replies are used with the AWAY command (if + allowed). RPL_AWAY is sent to any client sending a + PRIVMSG to a client which is away. RPL_AWAY is only + sent by the server to which the client is connected. + Replies RPL_UNAWAY and RPL_NOWAWAY are sent when the + client removes and sets an AWAY message. + + 311 RPL_WHOISUSER + " * :" + 312 RPL_WHOISSERVER + " :" + 313 RPL_WHOISOPERATOR + " :is an IRC operator" + + + + +Kalt Informational [Page 44] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 317 RPL_WHOISIDLE + " :seconds idle" + 318 RPL_ENDOFWHOIS + " :End of WHOIS list" + 319 RPL_WHOISCHANNELS + " :*( ( "@" / "+" ) " " )" + + - Replies 311 - 313, 317 - 319 are all replies + generated in response to a WHOIS message. Given that + there are enough parameters present, the answering + server MUST either formulate a reply out of the above + numerics (if the query nick is found) or return an + error reply. The '*' in RPL_WHOISUSER is there as + the literal character and not as a wild card. For + each reply set, only RPL_WHOISCHANNELS may appear + more than once (for long lists of channel names). + The '@' and '+' characters next to the channel name + indicate whether a client is a channel operator or + has been granted permission to speak on a moderated + channel. The RPL_ENDOFWHOIS reply is used to mark + the end of processing a WHOIS message. + + 314 RPL_WHOWASUSER + " * :" + 369 RPL_ENDOFWHOWAS + " :End of WHOWAS" + + - When replying to a WHOWAS message, a server MUST use + the replies RPL_WHOWASUSER, RPL_WHOISSERVER or + ERR_WASNOSUCHNICK for each nickname in the presented + list. At the end of all reply batches, there MUST + be RPL_ENDOFWHOWAS (even if there was only one reply + and it was an error). + + 321 RPL_LISTSTART + Obsolete. Not used. + + 322 RPL_LIST + " <# visible> :" + 323 RPL_LISTEND + ":End of LIST" + + - Replies RPL_LIST, RPL_LISTEND mark the actual replies + with data and end of the server's response to a LIST + command. If there are no channels available to return, + only the end reply MUST be sent. + + + + + +Kalt Informational [Page 45] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 325 RPL_UNIQOPIS + " " + + 324 RPL_CHANNELMODEIS + " " + + 331 RPL_NOTOPIC + " :No topic is set" + 332 RPL_TOPIC + " :" + + - When sending a TOPIC message to determine the + channel topic, one of two replies is sent. If + the topic is set, RPL_TOPIC is sent back else + RPL_NOTOPIC. + + 341 RPL_INVITING + " " + + - Returned by the server to indicate that the + attempted INVITE message was successful and is + being passed onto the end client. + + 342 RPL_SUMMONING + " :Summoning user to IRC" + + - Returned by a server answering a SUMMON message to + indicate that it is summoning that user. + + 346 RPL_INVITELIST + " " + 347 RPL_ENDOFINVITELIST + " :End of channel invite list" + + - When listing the 'invitations masks' for a given channel, + a server is required to send the list back using the + RPL_INVITELIST and RPL_ENDOFINVITELIST messages. A + separate RPL_INVITELIST is sent for each active mask. + After the masks have been listed (or if none present) a + RPL_ENDOFINVITELIST MUST be sent. + + 348 RPL_EXCEPTLIST + " " + 349 RPL_ENDOFEXCEPTLIST + " :End of channel exception list" + + + + + + +Kalt Informational [Page 46] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + - When listing the 'exception masks' for a given channel, + a server is required to send the list back using the + RPL_EXCEPTLIST and RPL_ENDOFEXCEPTLIST messages. A + separate RPL_EXCEPTLIST is sent for each active mask. + After the masks have been listed (or if none present) + a RPL_ENDOFEXCEPTLIST MUST be sent. + + 351 RPL_VERSION + ". :" + + - Reply by the server showing its version details. + The is the version of the software being + used (including any patchlevel revisions) and the + is used to indicate if the server is + running in "debug mode". + + The "comments" field may contain any comments about + the version or further version details. + + 352 RPL_WHOREPLY + " + ( "H" / "G" > ["*"] [ ( "@" / "+" ) ] + : " + + 315 RPL_ENDOFWHO + " :End of WHO list" + + - The RPL_WHOREPLY and RPL_ENDOFWHO pair are used + to answer a WHO message. The RPL_WHOREPLY is only + sent if there is an appropriate match to the WHO + query. If there is a list of parameters supplied + with a WHO message, a RPL_ENDOFWHO MUST be sent + after processing each list item with being + the item. + + 353 RPL_NAMREPLY + "( "=" / "*" / "@" ) + :[ "@" / "+" ] *( " " [ "@" / "+" ] ) + - "@" is used for secret channels, "*" for private + channels, and "=" for others (public channels). + + 366 RPL_ENDOFNAMES + " :End of NAMES list" + + - To reply to a NAMES message, a reply pair consisting + of RPL_NAMREPLY and RPL_ENDOFNAMES is sent by the + server back to the client. If there is no channel + found as in the query, then only RPL_ENDOFNAMES is + + + +Kalt Informational [Page 47] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + returned. The exception to this is when a NAMES + message is sent with no parameters and all visible + channels and contents are sent back in a series of + RPL_NAMEREPLY messages with a RPL_ENDOFNAMES to mark + the end. + + 364 RPL_LINKS + " : " + 365 RPL_ENDOFLINKS + " :End of LINKS list" + + - In replying to the LINKS message, a server MUST send + replies back using the RPL_LINKS numeric and mark the + end of the list using an RPL_ENDOFLINKS reply. + + 367 RPL_BANLIST + " " + 368 RPL_ENDOFBANLIST + " :End of channel ban list" + + - When listing the active 'bans' for a given channel, + a server is required to send the list back using the + RPL_BANLIST and RPL_ENDOFBANLIST messages. A separate + RPL_BANLIST is sent for each active banmask. After the + banmasks have been listed (or if none present) a + RPL_ENDOFBANLIST MUST be sent. + + 371 RPL_INFO + ":" + 374 RPL_ENDOFINFO + ":End of INFO list" + + - A server responding to an INFO message is required to + send all its 'info' in a series of RPL_INFO messages + with a RPL_ENDOFINFO reply to indicate the end of the + replies. + + 375 RPL_MOTDSTART + ":- Message of the day - " + 372 RPL_MOTD + ":- " + 376 RPL_ENDOFMOTD + ":End of MOTD command" + + - When responding to the MOTD message and the MOTD file + is found, the file is displayed line by line, with + each line no longer than 80 characters, using + + + + +Kalt Informational [Page 48] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + RPL_MOTD format replies. These MUST be surrounded + by a RPL_MOTDSTART (before the RPL_MOTDs) and an + RPL_ENDOFMOTD (after). + + 381 RPL_YOUREOPER + ":You are now an IRC operator" + + - RPL_YOUREOPER is sent back to a client which has + just successfully issued an OPER message and gained + operator status. + + 382 RPL_REHASHING + " :Rehashing" + + - If the REHASH option is used and an operator sends + a REHASH message, an RPL_REHASHING is sent back to + the operator. + + 383 RPL_YOURESERVICE + "You are service " + + - Sent by the server to a service upon successful + registration. + + 391 RPL_TIME + " :" + + - When replying to the TIME message, a server MUST send + the reply using the RPL_TIME format above. The string + showing the time need only contain the correct day and + time there. There is no further requirement for the + time string. + + 392 RPL_USERSSTART + ":UserID Terminal Host" + 393 RPL_USERS + ": " + 394 RPL_ENDOFUSERS + ":End of users" + 395 RPL_NOUSERS + ":Nobody logged in" + + - If the USERS message is handled by a server, the + replies RPL_USERSTART, RPL_USERS, RPL_ENDOFUSERS and + RPL_NOUSERS are used. RPL_USERSSTART MUST be sent + first, following by either a sequence of RPL_USERS + or a single RPL_NOUSER. Following this is + RPL_ENDOFUSERS. + + + +Kalt Informational [Page 49] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + 200 RPL_TRACELINK + "Link + V + + " + 201 RPL_TRACECONNECTING + "Try. " + 202 RPL_TRACEHANDSHAKE + "H.S. " + 203 RPL_TRACEUNKNOWN + "???? []" + 204 RPL_TRACEOPERATOR + "Oper " + 205 RPL_TRACEUSER + "User " + 206 RPL_TRACESERVER + "Serv S C + @ V" + 207 RPL_TRACESERVICE + "Service " + 208 RPL_TRACENEWTYPE + " 0 " + 209 RPL_TRACECLASS + "Class " + 210 RPL_TRACERECONNECT + Unused. + 261 RPL_TRACELOG + "File " + 262 RPL_TRACEEND + " :End of TRACE" + + - The RPL_TRACE* are all returned by the server in + response to the TRACE message. How many are + returned is dependent on the TRACE message and + whether it was sent by an operator or not. There + is no predefined order for which occurs first. + Replies RPL_TRACEUNKNOWN, RPL_TRACECONNECTING and + RPL_TRACEHANDSHAKE are all used for connections + which have not been fully established and are either + unknown, still attempting to connect or in the + process of completing the 'server handshake'. + RPL_TRACELINK is sent by any server which handles + a TRACE message and has to pass it on to another + server. The list of RPL_TRACELINKs sent in + response to a TRACE command traversing the IRC + network should reflect the actual connectivity of + the servers themselves along that path. + + + + +Kalt Informational [Page 50] + +RFC 2812 Internet Relay Chat: Client Protocol April 2000 + + + RPL_TRACENEWTYPE is to be used for any connection + which does not fit in the other categories but is + being displayed anyway. + RPL_TRACEEND is sent to indicate the end of the list. + + 211 RPL_STATSLINKINFO + " + +