From 833d20a69fe17ab846c153e35230c66a41d8fca9 Mon Sep 17 00:00:00 2001 From: Pixel <> Date: Wed, 28 Feb 2001 11:40:25 +0000 Subject: Premier jet --- aclocal.m4 | 1231 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1231 insertions(+) create mode 100644 aclocal.m4 (limited to 'aclocal.m4') diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..62bf46d --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,1231 @@ +dnl aclocal.m4 generated automatically by aclocal 1.4 + +dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +dnl This file is free software; the Free Software Foundation +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. + +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without +dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A +dnl PARTICULAR PURPOSE. + + +# serial 29 AM_PROG_LIBTOOL +AC_DEFUN(AM_PROG_LIBTOOL, +[AC_REQUIRE([AM_ENABLE_SHARED])dnl +AC_REQUIRE([AM_ENABLE_STATIC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([AC_PROG_RANLIB])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AM_PROG_LD])dnl +AC_REQUIRE([AM_PROG_NM])dnl +AC_REQUIRE([AM_SYS_NM_PARSE])dnl +AC_REQUIRE([AM_SYS_SYMBOL_UNDERSCORE])dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +dnl +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +# Check for any special flags to pass to ltconfig. +libtool_flags= +test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" +test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" +test "$silent" = yes && libtool_flags="$libtool_flags --silent" +test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" +test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case "$host" in +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line __oline__ "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case "`/usr/bin/file conftest.o`" in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; + +*-*-cygwin32*) + AM_SYS_LIBTOOL_CYGWIN32 + ;; + +esac + +# enable the --disable-libtool-lock switch + +AC_ARG_ENABLE(libtool-lock, +[ --disable-libtool-lock force libtool not to do file locking], +need_locks=$enableval, +need_locks=yes) + +if test x"$need_locks" = xno; then + libtool_flags="$libtool_flags --disable-lock" +fi + + +# Actually configure libtool. ac_aux_dir is where install-sh is found. +CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ +DLLTOOL="$DLLTOOL" AS="$AS" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ +|| AC_MSG_ERROR([libtool configure failed]) + +# Redirect the config.log output again, so that the ltconfig log is not +# clobbered by the next message. +exec 5>>./config.log +]) + +# AM_ENABLE_SHARED - implement the --enable-shared flag +# Usage: AM_ENABLE_SHARED[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AM_ENABLE_SHARED, +[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(shared, +changequote(<<, >>)dnl +<< --enable-shared[=PKGS] build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT], +changequote([, ])dnl +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_shared=yes ;; +no) enable_shared=no ;; +*) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl +]) + +# AM_DISABLE_SHARED - set the default shared flag to --disable-shared +AC_DEFUN(AM_DISABLE_SHARED, +[AM_ENABLE_SHARED(no)]) + +# AM_DISABLE_STATIC - set the default static flag to --disable-static +AC_DEFUN(AM_DISABLE_STATIC, +[AM_ENABLE_STATIC(no)]) + +# AM_ENABLE_STATIC - implement the --enable-static flag +# Usage: AM_ENABLE_STATIC[(DEFAULT)] +# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to +# `yes'. +AC_DEFUN(AM_ENABLE_STATIC, +[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE(static, +changequote(<<, >>)dnl +<< --enable-static[=PKGS] build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT], +changequote([, ])dnl +[p=${PACKAGE-default} +case "$enableval" in +yes) enable_static=yes ;; +no) enable_static=no ;; +*) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac], +enable_static=AM_ENABLE_STATIC_DEFAULT)dnl +]) + + +# AM_PROG_LD - find the path to the GNU or non-GNU linker +AC_DEFUN(AM_PROG_LD, +[AC_ARG_WITH(gnu-ld, +[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +ac_prog=ld +if test "$ac_cv_prog_gcc" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + ac_prog=`($CC -print-prog-name=ld) 2>&5` + case "$ac_prog" in + # Accept absolute paths. +changequote(,)dnl + /* | [A-Za-z]:/*) + # Canonicalize the path of ld + re_direlt='/[^/][^/]*/\.\./' + sub_uncdrive='s%^\([A-Za-z]\):/%//\1/%' +changequote([,])dnl + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + case "$host_os" in + cygwin*) + # Convert to a UNC path for cygwin + test -z "$LD" && LD=`echo X$ac_prog | $Xsed -e "$sub_uncdrive"` + ;; + *) + test -z "$LD" && LD="$ac_prog" + ;; + esac + ;; + ## + ## FIXME: The code fails later on if we try to use an $LD with + ## '\\' path separators. + ## +changequote(,)dnl + [A-Za-z]:[\\]*) + # Canonicalize the path of ld + re_direlt='\\[^\\][^\\]*\\\.\.\(\\\)' + sub_uncdrive='s%^\([A-Za-z]\):\\%//\1/%' +changequote([,])dnl + sub_uncdir='s%\\%/%g' + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%\1%"` + done + case "$host_os" in + cygwin*) + # Convert to a UNC path for cygwin + test -z "$LD" && LD=`echo X$ac_prog | sed -e 's%^X%%' -e "$sub_uncdrive" -e "$sub_uncdir"` + ;; + *) + test -z "$LD" && LD="$ac_prog" + ;; + esac + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(ac_cv_path_LD, +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog"; then + ac_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + ac_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$ac_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_SUBST(LD) +AM_PROG_LD_GNU +]) + +AC_DEFUN(AM_PROG_LD_GNU, +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + ac_cv_prog_gnu_ld=yes +else + ac_cv_prog_gnu_ld=no +fi]) +]) + +# AM_PROG_NM - find the path to a BSD-compatible name lister +AC_DEFUN(AM_PROG_NM, +[AC_MSG_CHECKING([for BSD-compatible nm]) +AC_CACHE_VAL(ac_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + ac_cv_path_NM="$NM" +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/nm; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + ac_cv_path_NM="$ac_dir/nm -B" + elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + ac_cv_path_NM="$ac_dir/nm -p" + else + ac_cv_path_NM="$ac_dir/nm" + fi + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm +fi]) +NM="$ac_cv_path_NM" +AC_MSG_RESULT([$NM]) +AC_SUBST(NM) +]) + +# AM_SYS_NM_PARSE - Check for command ro grab the raw symbol name followed +# by C symbol name from nm. +AC_DEFUN(AM_SYS_NM_PARSE, +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AM_PROG_NM])dnl +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output]) +AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe, +[# These are sane defaults that work on at least a few old systems. +# {They come from Ultrix. What could be older than Ultrix?!! ;)} + +changequote(,)dnl +# Character class describing NM global symbol codes. +ac_symcode='[BCDEGRSTU]' + +# Regexp to match symbols that can be accessed directly from C. +ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform the above into a raw symbol and a C symbol. +ac_symxfrm='\1 \1' + +# Define system-specific variables. +case "$host_os" in +aix*) + ac_symcode='[BCDTU]' + ;; +sunos* | cygwin32* | mingw32*) + ac_sympat='_\([_A-Za-z][_A-Za-z0-9]*\)' + ac_symxfrm='_\1 \1' + ;; +irix*) + # Cannot use undefined symbols on IRIX because inlined functions mess us up. + ac_symcode='[BCDEGRST]' + ;; +solaris*) + ac_symcode='[BDTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + ac_symcode='[ABCDGISTUW]' +fi + +case "$host_os" in +cygwin32* | mingw32*) + # We do not want undefined symbols on cygwin32. The user must + # arrange to define them via -l arguments. + ac_symcode='[ABCDGISTW]' + ;; +esac +changequote([,])dnl + +# Write the raw and C identifiers. +ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* $ac_symcode $ac_sympat$/$ac_symxfrm/p'" + +# Check to see that the pipe works correctly. +ac_pipe_works=no +cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then + + # Try sorting and uniquifying the output. + if sort "$ac_nlist" | uniq > "$ac_nlist"T; then + mv -f "$ac_nlist"T "$ac_nlist" + ac_wcout=`wc "$ac_nlist" 2>/dev/null` +changequote(,)dnl + ac_count=`echo "X$ac_wcout" | sed -e 's,^X,,' -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'` +changequote([,])dnl + (test "$ac_count" -ge 0) 2>/dev/null || ac_count=-1 + else + rm -f "$ac_nlist"T + ac_count=-1 + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then + if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then + cat < conftest.c +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + sed 's/^.* \(.*\)$/extern char \1;/' < "$ac_nlist" >> conftest.c + + cat <> conftest.c +#if defined (__STDC__) && __STDC__ +# define __ptr_t void * +#else +# define __ptr_t char * +#endif + +/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */ +int dld_preloaded_symbol_count = $ac_count; + +/* The mapping between symbol names and symbols. */ +struct { + char *name; + __ptr_t address; +} +changequote(,)dnl +dld_preloaded_symbols[] = +changequote([,])dnl +{ +EOF + sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c + cat <<\EOF >> conftest.c + {0, (__ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftestm.$ac_objext + ac_save_LIBS="$LIBS" + ac_save_CFLAGS="$CFLAGS" + LIBS="conftestm.$ac_objext" + CFLAGS="$CFLAGS$no_builtin_flag" + if AC_TRY_EVAL(ac_link) && test -s conftest; then + ac_pipe_works=yes + else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC + fi + LIBS="$ac_save_LIBS" + CFLAGS="$ac_save_CFLAGS" + else + echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC + fi + else + echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC + fi + else + echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi +else + echo "$progname: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC +fi +rm -rf conftest* + +# Do not use the global_symbol_pipe unless it works. +test "$ac_pipe_works" = yes || ac_cv_sys_global_symbol_pipe= +]) + +ac_result=yes +if test -z "$ac_cv_sys_global_symbol_pipe"; then + ac_result=no +fi +AC_MSG_RESULT($ac_result) +]) + +# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32 +AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32, +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +AC_CHECK_TOOL(AS, as, false) +]) + +# AM_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols +# with an underscore? +AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, +[AC_REQUIRE([AM_PROG_NM])dnl +AC_REQUIRE([AM_SYS_NM_PARSE])dnl +AC_MSG_CHECKING([for _ prefix in compiled symbols]) +AC_CACHE_VAL(ac_cv_sys_symbol_underscore, +[ac_cv_sys_symbol_underscore=no +cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then + # See whether the symbols have a leading underscore. + if egrep '^_nm_test_func' "$ac_nlist" >/dev/null; then + ac_cv_sys_symbol_underscore=yes + else + if egrep '^nm_test_func ' "$ac_nlist" >/dev/null; then + : + else + echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC + fi + fi + else + echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC + fi +else + echo "configure: failed program was:" >&AC_FD_CC + cat conftest.c >&AC_FD_CC +fi +rm -rf conftest* +]) +AC_MSG_RESULT($ac_cv_sys_symbol_underscore) +if test x$ac_cv_sys_symbol_underscore = xyes; then + AC_DEFINE(WITH_SYMBOL_UNDERSCORE,1, + [define if compiled symbols have a leading underscore]) +fi +]) +# Configure paths for AUDIOFILE +# Bertrand Guiheneuf 98-10-21 +# stolen from esd.m4 in esound : +# Manish Singh 98-9-30 +# stolen back from Frank Belew +# stolen from Manish Singh +# Shamelessly stolen from Owen Taylor + +dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) +dnl Test for AUDIOFILE, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS +dnl +AC_DEFUN(AM_PATH_AUDIOFILE, +[dnl +dnl Get the cflags and libraries from the audiofile-config script +dnl +AC_ARG_WITH(audiofile-prefix,[ --with-audiofile-prefix=PFX Prefix where AUDIOFILE is installed (optional)], + audiofile_prefix="$withval", audiofile_prefix="") +AC_ARG_WITH(audiofile-exec-prefix,[ --with-audiofile-exec-prefix=PFX Exec prefix where AUDIOFILE is installed (optional)], + audiofile_exec_prefix="$withval", audiofile_exec_prefix="") +AC_ARG_ENABLE(audiofiletest, [ --disable-audiofiletest Do not try to compile and run a test AUDIOFILE program], + , enable_audiofiletest=yes) + + if test x$audiofile_exec_prefix != x ; then + audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix" + if test x${AUDIOFILE_CONFIG+set} != xset ; then + AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config + fi + fi + if test x$audiofile_prefix != x ; then + audiofile_args="$audiofile_args --prefix=$audiofile_prefix" + if test x${AUDIOFILE_CONFIG+set} != xset ; then + AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config + fi + fi + + AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no) + min_audiofile_version=ifelse([$1], ,0.2.5,$1) + AC_MSG_CHECKING(for AUDIOFILE - version >= $min_audiofile_version) + no_audiofile="" + if test "$AUDIOFILE_CONFIG" = "no" ; then + no_audiofile=yes + else + AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs` + AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags` + audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + if test "x$enable_audiofiletest" = "xyes" ; then + ac_save_CFLAGS="$CFLAGS" + ac_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS" + LIBS="$LIBS $AUDIOFILE_LIBS" +dnl +dnl Now check if the installed AUDIOFILE is sufficiently new. (Also sanity +dnl checks the results of audiofile-config to some extent +dnl + rm -f conf.audiofiletest + AC_TRY_RUN([ +#include +#include +#include +#include + +char* +my_strdup (char *str) +{ + char *new_str; + + if (str) + { + new_str = malloc ((strlen (str) + 1) * sizeof(char)); + strcpy (new_str, str); + } + else + new_str = NULL; + + return new_str; +} + +int main () +{ + int major, minor, micro; + char *tmp_version; + + system ("touch conf.audiofiletest"); + + /* HP/UX 9 (%@#!) writes to sscanf strings */ + tmp_version = my_strdup("$min_audiofile_version"); + if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { + printf("%s, bad version string\n", "$min_audiofile_version"); + exit(1); + } + + if (($audiofile_major_version > major) || + (($audiofile_major_version == major) && ($audiofile_minor_version > minor)) || + (($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro))) + { + return 0; + } + else + { + printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version); + printf("*** of AUDIOFILE required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro); + printf("*** best to upgrade to the required version.\n"); + printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n"); + printf("*** to point to the correct copy of audiofile-config, and remove the file\n"); + printf("*** config.cache before re-running configure\n"); + return 1; + } +} + +],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + if test "x$no_audiofile" = x ; then + AC_MSG_RESULT(yes) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT(no) + if test "$AUDIOFILE_CONFIG" = "no" ; then + echo "*** The audiofile-config script installed by AUDIOFILE could not be found" + echo "*** If AUDIOFILE was installed in PREFIX, make sure PREFIX/bin is in" + echo "*** your path, or set the AUDIOFILE_CONFIG environment variable to the" + echo "*** full path to audiofile-config." + else + if test -f conf.audiofiletest ; then + : + else + echo "*** Could not run AUDIOFILE test program, checking why..." + CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS" + LIBS="$LIBS $AUDIOFILE_LIBS" + AC_TRY_LINK([ +#include +#include +], [ return 0; ], + [ echo "*** The test program compiled, but did not run. This usually means" + echo "*** that the run-time linker is not finding AUDIOFILE or finding the wrong" + echo "*** version of AUDIOFILE. If it is not finding AUDIOFILE, you'll need to set your" + echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" + echo "*** to the installed location Also, make sure you have run ldconfig if that" + echo "*** is required on your system" + echo "***" + echo "*** If you have an old version installed, it is best to remove it, although" + echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], + [ echo "*** The test program failed to compile or link. See the file config.log for the" + echo "*** exact error that occured. This usually means AUDIOFILE was incorrectly installed" + echo "*** or that you have moved AUDIOFILE since it was installed. In the latter case, you" + echo "*** may want to edit the audiofile-config script: $AUDIOFILE_CONFIG" ]) + CFLAGS="$ac_save_CFLAGS" + LIBS="$ac_save_LIBS" + fi + fi + AUDIOFILE_CFLAGS="" + AUDIOFILE_LIBS="" + ifelse([$3], , :, [$3]) + fi + AC_SUBST(AUDIOFILE_CFLAGS) + AC_SUBST(AUDIOFILE_LIBS) + rm -f conf.audiofiletest +]) + +# Do all the work for Automake. This macro actually does too much -- +# some checks are only needed if your package does certain things. +# But this isn't really a big deal. + +# serial 1 + +dnl Usage: +dnl AM_INIT_AUTOMAKE(package,version, [no-define]) + +AC_DEFUN(AM_INIT_AUTOMAKE, +[AC_REQUIRE([AC_PROG_INSTALL]) +PACKAGE=[$1] +AC_SUBST(PACKAGE) +VERSION=[$2] +AC_SUBST(VERSION) +dnl test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi +ifelse([$3],, +AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) +AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) +AC_REQUIRE([AM_SANITY_CHECK]) +AC_REQUIRE([AC_ARG_PROGRAM]) +dnl FIXME This is truly gross. +missing_dir=`cd $ac_aux_dir && pwd` +AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) +AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) +AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) +AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) +AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) +AC_REQUIRE([AC_PROG_MAKE_SET])]) + +# +# Check to make sure that the build environment is sane. +# + +AC_DEFUN(AM_SANITY_CHECK, +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftestfile +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` + if test "[$]*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftestfile` + fi + if test "[$]*" != "X $srcdir/configure conftestfile" \ + && test "[$]*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "[$]2" = conftestfile + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +rm -f conftest* +AC_MSG_RESULT(yes)]) + +dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) +dnl The program must properly implement --version. +AC_DEFUN(AM_MISSING_PROG, +[AC_MSG_CHECKING(for working $2) +# Run test in a subshell; some versions of sh will print an error if +# an executable is not found, even if stderr is redirected. +# Redirect stdin to placate older versions of autoconf. Sigh. +if ($2 --version) < /dev/null > /dev/null 2>&1; then + $1=$2 + AC_MSG_RESULT(found) +else + $1="$3/missing $2" + AC_MSG_RESULT(missing) +fi +AC_SUBST($1)]) + +# Like AC_CONFIG_HEADER, but automatically create stamp file. + +AC_DEFUN(AM_CONFIG_HEADER, +[AC_PREREQ([2.12]) +AC_CONFIG_HEADER([$1]) +dnl When config.status generates a header, we must update the stamp-h file. +dnl This file resides in the same directory as the config header +dnl that is generated. We must strip everything past the first ":", +dnl and everything past the last "/". +AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl +ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, +<>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, +<>; do + case " <<$>>CONFIG_HEADERS " in + *" <<$>>am_file "*<<)>> + echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx + ;; + esac + am_indx=`expr "<<$>>am_indx" + 1` +done<<>>dnl>>) +changequote([,]))]) + +# Add --enable-maintainer-mode option to configure. +# From Jim Meyering + +# serial 1 + +AC_DEFUN(AM_MAINTAINER_MODE, +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT($USE_MAINTAINER_MODE) + AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +# Define a conditional. + +AC_DEFUN(AM_CONDITIONAL, +[AC_SUBST($1_TRUE) +AC_SUBST($1_FALSE) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi]) + +# Macro to add for using GNU gettext. +# Ulrich Drepper , 1995. +# +# This file can be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU Public License +# but which still want to provide support for the GNU gettext functionality. +# Please note that the actual code is *not* freely available. + +# serial 5 + +AC_DEFUN(AM_WITH_NLS, + [AC_MSG_CHECKING([whether NLS is requested]) + dnl Default is enabled NLS + AC_ARG_ENABLE(nls, + [ --disable-nls do not use Native Language Support], + USE_NLS=$enableval, USE_NLS=yes) + AC_MSG_RESULT($USE_NLS) + AC_SUBST(USE_NLS) + + USE_INCLUDED_LIBINTL=no + + dnl If we use NLS figure out what method + if test "$USE_NLS" = "yes"; then + AC_DEFINE(ENABLE_NLS) + AC_MSG_CHECKING([whether included gettext is requested]) + AC_ARG_WITH(included-gettext, + [ --with-included-gettext use the GNU gettext library included here], + nls_cv_force_use_gnu_gettext=$withval, + nls_cv_force_use_gnu_gettext=no) + AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) + + nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" + if test "$nls_cv_force_use_gnu_gettext" != "yes"; then + dnl User does not insist on using GNU NLS library. Figure out what + dnl to use. If gettext or catgets are available (in this order) we + dnl use this. Else we have to fall back to GNU NLS library. + dnl catgets is only used if permitted by option --with-catgets. + nls_cv_header_intl= + nls_cv_header_libgt= + CATOBJEXT=NONE + + AC_CHECK_HEADER(libintl.h, + [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc, + [AC_TRY_LINK([#include ], [return (int) gettext ("")], + gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)]) + + if test "$gt_cv_func_gettext_libc" != "yes"; then + AC_CHECK_LIB(intl, bindtextdomain, + [AC_CACHE_CHECK([for gettext in libintl], + gt_cv_func_gettext_libintl, + [AC_CHECK_LIB(intl, gettext, + gt_cv_func_gettext_libintl=yes, + gt_cv_func_gettext_libintl=no)], + gt_cv_func_gettext_libintl=no)]) + fi + + if test "$gt_cv_func_gettext_libc" = "yes" \ + || test "$gt_cv_func_gettext_libintl" = "yes"; then + AC_DEFINE(HAVE_GETTEXT) + AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl + if test "$MSGFMT" != "no"; then + AC_CHECK_FUNCS(dcgettext) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; + return _nl_msg_cat_cntr], + [CATOBJEXT=.gmo + DATADIRNAME=share], + [CATOBJEXT=.mo + DATADIRNAME=lib]) + INSTOBJEXT=.mo + fi + fi + ]) + + if test "$CATOBJEXT" = "NONE"; then + AC_MSG_CHECKING([whether catgets can be used]) + AC_ARG_WITH(catgets, + [ --with-catgets use catgets functions if available], + nls_cv_use_catgets=$withval, nls_cv_use_catgets=no) + AC_MSG_RESULT($nls_cv_use_catgets) + + if test "$nls_cv_use_catgets" = "yes"; then + dnl No gettext in C library. Try catgets next. + AC_CHECK_LIB(i, main) + AC_CHECK_FUNC(catgets, + [AC_DEFINE(HAVE_CATGETS) + INTLOBJS="\$(CATOBJS)" + AC_PATH_PROG(GENCAT, gencat, no)dnl + if test "$GENCAT" != "no"; then + AC_PATH_PROG(GMSGFMT, gmsgfmt, no) + if test "$GMSGFMT" = "no"; then + AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no) + fi + AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + USE_INCLUDED_LIBINTL=yes + CATOBJEXT=.cat + INSTOBJEXT=.cat + DATADIRNAME=lib + INTLDEPS='$(top_builddir)/intl/libintl.a' + INTLLIBS=$INTLDEPS + LIBS=`echo $LIBS | sed -e 's/-lintl//'` + nls_cv_header_intl=intl/libintl.h + nls_cv_header_libgt=intl/libgettext.h + fi]) + fi + fi + + if test "$CATOBJEXT" = "NONE"; then + dnl Neither gettext nor catgets in included in the C library. + dnl Fall back on GNU gettext library. + nls_cv_use_gnu_gettext=yes + fi + fi + + if test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions used to generate GNU NLS library. + INTLOBJS="\$(GETTOBJS)" + AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, + [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) + AC_SUBST(MSGFMT) + USE_INCLUDED_LIBINTL=yes + CATOBJEXT=.gmo + INSTOBJEXT=.mo + DATADIRNAME=share + INTLDEPS='$(top_builddir)/intl/libintl.a' + INTLLIBS=$INTLDEPS + LIBS=`echo $LIBS | sed -e 's/-lintl//'` + nls_cv_header_intl=intl/libintl.h + nls_cv_header_libgt=intl/libgettext.h + fi + + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + AC_MSG_RESULT( + [found xgettext program is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + fi + + # We need to process the po/ directory. + POSUB=po + else + DATADIRNAME=share + nls_cv_header_intl=intl/libintl.h + nls_cv_header_libgt=intl/libgettext.h + fi + AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl) + AC_OUTPUT_COMMANDS( + [case "$CONFIG_FILES" in *po/Makefile.in*) + sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile + esac]) + + + # If this is used in GNU gettext we have to set USE_NLS to `yes' + # because some of the sources are only built for this goal. + if test "$PACKAGE" = gettext; then + USE_NLS=yes + USE_INCLUDED_LIBINTL=yes + fi + + dnl These rules are solely for the distribution goal. While doing this + dnl we only have to keep exactly one list of the available catalogs + dnl in configure.in. + for lang in $ALL_LINGUAS; do + GMOFILES="$GMOFILES $lang.gmo" + POFILES="$POFILES $lang.po" + done + + dnl Make all variables we use known to autoconf. + AC_SUBST(USE_INCLUDED_LIBINTL) + AC_SUBST(CATALOGS) + AC_SUBST(CATOBJEXT) + AC_SUBST(DATADIRNAME) + AC_SUBST(GMOFILES) + AC_SUBST(INSTOBJEXT) + AC_SUBST(INTLDEPS) + AC_SUBST(INTLLIBS) + AC_SUBST(INTLOBJS) + AC_SUBST(POFILES) + AC_SUBST(POSUB) + ]) + +AC_DEFUN(AM_GNU_GETTEXT, + [AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_ISC_POSIX])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_C_CONST])dnl + AC_REQUIRE([AC_C_INLINE])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + + AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \ +unistd.h sys/param.h]) + AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ +strdup __argz_count __argz_stringify __argz_next]) + + if test "${ac_cv_func_stpcpy+set}" != "set"; then + AC_CHECK_FUNCS(stpcpy) + fi + if test "${ac_cv_func_stpcpy}" = "yes"; then + AC_DEFINE(HAVE_STPCPY) + fi + + AM_LC_MESSAGES + AM_WITH_NLS + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + AC_MSG_CHECKING(for catalogs to be installed) + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + AC_MSG_RESULT($LINGUAS) + fi + + dnl Construct list of names of catalog files to be constructed. + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + dnl The reference to in the installed file + dnl must be resolved because we cannot expect the users of this + dnl to define HAVE_LOCALE_H. + if test $ac_cv_header_locale_h = yes; then + INCLUDE_LOCALE_H="#include " + else + INCLUDE_LOCALE_H="\ +/* The system does not provide the header . Take care yourself. */" + fi + AC_SUBST(INCLUDE_LOCALE_H) + + dnl Determine which catalog format we have (if any is needed) + dnl For now we know about two different formats: + dnl Linux libc-5 and the normal X/Open format + test -d intl || mkdir intl + if test "$CATOBJEXT" = ".cat"; then + AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen) + + dnl Transform the SED scripts while copying because some dumb SEDs + dnl cannot handle comments. + sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed + fi + dnl po2tbl.sed is always needed. + sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ + $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed + + dnl In the intl/Makefile.in we have a special dependency which makes + dnl only sense for gettext. We comment this out for non-gettext + dnl packages. + if test "$PACKAGE" = "gettext"; then + GT_NO="#NO#" + GT_YES= + else + GT_NO= + GT_YES="#YES#" + fi + AC_SUBST(GT_NO) + AC_SUBST(GT_YES) + + dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly + dnl find the mkinstalldirs script in another subdir but ($top_srcdir). + dnl Try to locate is. + MKINSTALLDIRS= + if test -n "$ac_aux_dir"; then + MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" + fi + if test -z "$MKINSTALLDIRS"; then + MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" + fi + AC_SUBST(MKINSTALLDIRS) + + dnl *** For now the libtool support in intl/Makefile is not for real. + l= + AC_SUBST(l) + + dnl Generate list of files to be processed by xgettext which will + dnl be included in po/Makefile. + test -d po || mkdir po + if test "x$srcdir" != "x."; then + if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then + posrcprefix="$srcdir/" + else + posrcprefix="../$srcdir/" + fi + else + posrcprefix="../" + fi + rm -f po/POTFILES + sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ + < $srcdir/po/POTFILES.in > po/POTFILES + ]) + +# Search path for a program which passes the given test. +# Ulrich Drepper , 1996. +# +# This file can be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU Public License +# but which still want to provide support for the GNU gettext functionality. +# Please note that the actual code is *not* freely available. + +# serial 1 + +dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN(AM_PATH_PROG_WITH_TEST, +[# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + /*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in ifelse([$5], , $PATH, [$5]); do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test -n "[$]$1"; then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) + +# Check whether LC_MESSAGES is available in . +# Ulrich Drepper , 1995. +# +# This file can be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU Public License +# but which still want to provide support for the GNU gettext functionality. +# Please note that the actual code is *not* freely available. + +# serial 1 + +AC_DEFUN(AM_LC_MESSAGES, + [if test $ac_cv_header_locale_h = yes; then + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include ], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES) + fi + fi]) + -- cgit v1.2.3