dnl aclocal.m4 generated automatically by aclocal 1.4 dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. # serial 29 AM_PROG_LIBTOOL AC_DEFUN(AM_PROG_LIBTOOL, [AC_REQUIRE([AM_ENABLE_SHARED])dnl AC_REQUIRE([AM_ENABLE_STATIC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AM_PROG_LD])dnl AC_REQUIRE([AM_PROG_NM])dnl AC_REQUIRE([AM_SYS_NM_PARSE])dnl AC_REQUIRE([AM_SYS_SYMBOL_UNDERSCORE])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Check for any special flags to pass to ltconfig. libtool_flags= test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$silent" = yes && libtool_flags="$libtool_flags --silent" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" # Some flags need to be propagated to the compiler or linker for good # libtool support. case "$host" in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; *-*-cygwin32*) AM_SYS_LIBTOOL_CYGWIN32 ;; esac # enable the --disable-libtool-lock switch AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock force libtool not to do file locking], need_locks=$enableval, need_locks=yes) if test x"$need_locks" = xno; then libtool_flags="$libtool_flags --disable-lock" fi # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ DLLTOOL="$DLLTOOL" AS="$AS" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) # AM_ENABLE_SHARED - implement the --enable-shared flag # Usage: AM_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AM_ENABLE_SHARED, [define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl ]) # AM_DISABLE_SHARED - set the default shared flag to --disable-shared AC_DEFUN(AM_DISABLE_SHARED, [AM_ENABLE_SHARED(no)]) # AM_DISABLE_STATIC - set the default static flag to --disable-static AC_DEFUN(AM_DISABLE_STATIC, [AM_ENABLE_STATIC(no)]) # AM_ENABLE_STATIC - implement the --enable-static flag # Usage: AM_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AM_ENABLE_STATIC, [define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AM_ENABLE_STATIC_DEFAULT)dnl ]) # AM_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN(AM_PROG_LD, [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. changequote(,)dnl /* | [A-Za-z]:/*) # Canonicalize the path of ld re_direlt='/[^/][^/]*/\.\./' sub_uncdrive='s%^\([A-Za-z]\):/%//\1/%' changequote([,])dnl while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done case "$host_os" in cygwin*) # Convert to a UNC path for cygwin test -z "$LD" && LD=`echo X$ac_prog | $Xsed -e "$sub_uncdrive"` ;; *) test -z "$LD" && LD="$ac_prog" ;; esac ;; ## ## FIXME: The code fails later on if we try to use an $LD with ## '\\' path separators. ## changequote(,)dnl [A-Za-z]:[\\]*) # Canonicalize the path of ld re_direlt='\\[^\\][^\\]*\\\.\.\(\\\)' sub_uncdrive='s%^\([A-Za-z]\):\\%//\1/%' changequote([,])dnl sub_uncdir='s%\\%/%g' while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%\1%"` done case "$host_os" in cygwin*) # Convert to a UNC path for cygwin test -z "$LD" && LD=`echo X$ac_prog | sed -e 's%^X%%' -e "$sub_uncdrive" -e "$sub_uncdir"` ;; *) test -z "$LD" && LD="$ac_prog" ;; esac ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(ac_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog"; then ac_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else ac_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$ac_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_SUBST(LD) AM_PROG_LD_GNU ]) AC_DEFUN(AM_PROG_LD_GNU, [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then ac_cv_prog_gnu_ld=yes else ac_cv_prog_gnu_ld=no fi]) ]) # AM_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN(AM_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. ac_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -B" elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -p" else ac_cv_path_NM="$ac_dir/nm" fi break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm fi]) NM="$ac_cv_path_NM" AC_MSG_RESULT([$NM]) AC_SUBST(NM) ]) # AM_SYS_NM_PARSE - Check for command ro grab the raw symbol name followed # by C symbol name from nm. AC_DEFUN(AM_SYS_NM_PARSE, [AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AM_PROG_NM])dnl # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output]) AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe, [# These are sane defaults that work on at least a few old systems. # {They come from Ultrix. What could be older than Ultrix?!! ;)} changequote(,)dnl # Character class describing NM global symbol codes. ac_symcode='[BCDEGRSTU]' # Regexp to match symbols that can be accessed directly from C. ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Transform the above into a raw symbol and a C symbol. ac_symxfrm='\1 \1' # Define system-specific variables. case "$host_os" in aix*) ac_symcode='[BCDTU]' ;; sunos* | cygwin32* | mingw32*) ac_sympat='_\([_A-Za-z][_A-Za-z0-9]*\)' ac_symxfrm='_\1 \1' ;; irix*) # Cannot use undefined symbols on IRIX because inlined functions mess us up. ac_symcode='[BCDEGRST]' ;; solaris*) ac_symcode='[BDTU]' ;; esac # If we're using GNU nm, then use its standard symbol codes. if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then ac_symcode='[ABCDGISTUW]' fi case "$host_os" in cygwin32* | mingw32*) # We do not want undefined symbols on cygwin32. The user must # arrange to define them via -l arguments. ac_symcode='[ABCDGISTW]' ;; esac changequote([,])dnl # Write the raw and C identifiers. ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* $ac_symcode $ac_sympat$/$ac_symxfrm/p'" # Check to see that the pipe works correctly. ac_pipe_works=no cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then # Try sorting and uniquifying the output. if sort "$ac_nlist" | uniq > "$ac_nlist"T; then mv -f "$ac_nlist"T "$ac_nlist" ac_wcout=`wc "$ac_nlist" 2>/dev/null` changequote(,)dnl ac_count=`echo "X$ac_wcout" | sed -e 's,^X,,' -e 's/^[ ]*\([0-9][0-9]*\).*$/\1/'` changequote([,])dnl (test "$ac_count" -ge 0) 2>/dev/null || ac_count=-1 else rm -f "$ac_nlist"T ac_count=-1 fi # Make sure that we snagged all the symbols we need. if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then cat < conftest.c #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. sed 's/^.* \(.*\)$/extern char \1;/' < "$ac_nlist" >> conftest.c cat <> conftest.c #if defined (__STDC__) && __STDC__ # define __ptr_t void * #else # define __ptr_t char * #endif /* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */ int dld_preloaded_symbol_count = $ac_count; /* The mapping between symbol names and symbols. */ struct { char *name; __ptr_t address; } changequote(,)dnl dld_preloaded_symbols[] = changequote([,])dnl { EOF sed 's/^\(.*\) \(.*\)$/ {"\1", (__ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c cat <<\EOF >> conftest.c {0, (__ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftestm.$ac_objext ac_save_LIBS="$LIBS" ac_save_CFLAGS="$CFLAGS" LIBS="conftestm.$ac_objext" CFLAGS="$CFLAGS$no_builtin_flag" if AC_TRY_EVAL(ac_link) && test -s conftest; then ac_pipe_works=yes else echo "configure: failed program was:" >&AC_FD_CC cat conftest.c >&AC_FD_CC fi LIBS="$ac_save_LIBS" CFLAGS="$ac_save_CFLAGS" else echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC fi else echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC fi else echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC fi else echo "$progname: failed program was:" >&AC_FD_CC cat conftest.c >&AC_FD_CC fi rm -rf conftest* # Do not use the global_symbol_pipe unless it works. test "$ac_pipe_works" = yes || ac_cv_sys_global_symbol_pipe= ]) ac_result=yes if test -z "$ac_cv_sys_global_symbol_pipe"; then ac_result=no fi AC_MSG_RESULT($ac_result) ]) # AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32 AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32, [AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) ]) # AM_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols # with an underscore? AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [AC_REQUIRE([AM_PROG_NM])dnl AC_REQUIRE([AM_SYS_NM_PARSE])dnl AC_MSG_CHECKING([for _ prefix in compiled symbols]) AC_CACHE_VAL(ac_cv_sys_symbol_underscore, [ac_cv_sys_symbol_underscore=no cat > conftest.$ac_ext < $ac_nlist) && test -s "$ac_nlist"; then # See whether the symbols have a leading underscore. if egrep '^_nm_test_func' "$ac_nlist" >/dev/null; then ac_cv_sys_symbol_underscore=yes else if egrep '^nm_test_func ' "$ac_nlist" >/dev/null; then : else echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC fi fi else echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC fi else echo "configure: failed program was:" >&AC_FD_CC cat conftest.c >&AC_FD_CC fi rm -rf conftest* ]) AC_MSG_RESULT($ac_cv_sys_symbol_underscore) if test x$ac_cv_sys_symbol_underscore = xyes; then AC_DEFINE(WITH_SYMBOL_UNDERSCORE,1, [define if compiled symbols have a leading underscore]) fi ]) # Configure paths for AUDIOFILE # Bertrand Guiheneuf 98-10-21 # stolen from esd.m4 in esound : # Manish Singh 98-9-30 # stolen back from Frank Belew # stolen from Manish Singh # Shamelessly stolen from Owen Taylor dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl Test for AUDIOFILE, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS dnl AC_DEFUN(AM_PATH_AUDIOFILE, [dnl dnl Get the cflags and libraries from the audiofile-config script dnl AC_ARG_WITH(audiofile-prefix,[ --with-audiofile-prefix=PFX Prefix where AUDIOFILE is installed (optional)], audiofile_prefix="$withval", audiofile_prefix="") AC_ARG_WITH(audiofile-exec-prefix,[ --with-audiofile-exec-prefix=PFX Exec prefix where AUDIOFILE is installed (optional)], audiofile_exec_prefix="$withval", audiofile_exec_prefix="") AC_ARG_ENABLE(audiofiletest, [ --disable-audiofiletest Do not try to compile and run a test AUDIOFILE program], , enable_audiofiletest=yes) if test x$audiofile_exec_prefix != x ; then audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix" if test x${AUDIOFILE_CONFIG+set} != xset ; then AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config fi fi if test x$audiofile_prefix != x ; then audiofile_args="$audiofile_args --prefix=$audiofile_prefix" if test x${AUDIOFILE_CONFIG+set} != xset ; then AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config fi fi AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no) min_audiofile_version=ifelse([$1], ,0.2.5,$1) AC_MSG_CHECKING(for AUDIOFILE - version >= $min_audiofile_version) no_audiofile="" if test "$AUDIOFILE_CONFIG" = "no" ; then no_audiofile=yes else AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs` AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags` audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_audiofiletest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS" LIBS="$LIBS $AUDIOFILE_LIBS" dnl dnl Now check if the installed AUDIOFILE is sufficiently new. (Also sanity dnl checks the results of audiofile-config to some extent dnl rm -f conf.audiofiletest AC_TRY_RUN([ #include #include #include #include char* my_strdup (char *str) { char *new_str; if (str) { new_str = malloc ((strlen (str) + 1) * sizeof(char)); strcpy (new_str, str); } else new_str = NULL; return new_str; } int main () { int major, minor, micro; char *tmp_version; system ("touch conf.audiofiletest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = my_strdup("$min_audiofile_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_audiofile_version"); exit(1); } if (($audiofile_major_version > major) || (($audiofile_major_version == major) && ($audiofile_minor_version > minor)) || (($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro))) { return 0; } else { printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version); printf("*** of AUDIOFILE required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro); printf("*** best to upgrade to the required version.\n"); printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n"); printf("*** to point to the correct copy of audiofile-config, and remove the file\n"); printf("*** config.cache before re-running configure\n"); return 1; } } ],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_audiofile" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$AUDIOFILE_CONFIG" = "no" ; then echo "*** The audiofile-config script installed by AUDIOFILE could not be found" echo "*** If AUDIOFILE was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the AUDIOFILE_CONFIG environment variable to the" echo "*** full path to audiofile-config." else if test -f conf.audiofiletest ; then : else echo "*** Could not run AUDIOFILE test program, checking why..." CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS" LIBS="$LIBS $AUDIOFILE_LIBS" AC_TRY_LINK([ #include #include ], [ return 0; ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding AUDIOFILE or finding the wrong" echo "*** version of AUDIOFILE. If it is not finding AUDIOFILE, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means AUDIOFILE was incorrectly installed" echo "*** or that you have moved AUDIOFILE since it was installed. In the latter case, you" echo "*** may want to edit the audiofile-config script: $AUDIOFILE_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi AUDIOFILE_CFLAGS="" AUDIOFILE_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(AUDIOFILE_CFLAGS) AC_SUBST(AUDIOFILE_LIBS) rm -f conf.audiofiletest ]) # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. # serial 1 dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN(AM_INIT_AUTOMAKE, [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) VERSION=[$2] AC_SUBST(VERSION) dnl test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) AC_REQUIRE([AM_SANITY_CHECK]) AC_REQUIRE([AC_ARG_PROGRAM]) dnl FIXME This is truly gross. missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) AC_REQUIRE([AC_PROG_MAKE_SET])]) # # Check to make sure that the build environment is sane. # AC_DEFUN(AM_SANITY_CHECK, [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "[$]*" != "X $srcdir/configure conftestfile" \ && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "[$]2" = conftestfile ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi rm -f conftest* AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. AC_DEFUN(AM_MISSING_PROG, [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if ($2 --version) < /dev/null > /dev/null 2>&1; then $1=$2 AC_MSG_RESULT(found) else $1="$3/missing $2" AC_MSG_RESULT(missing) fi AC_SUBST($1)]) # Like AC_CONFIG_HEADER, but automatically create stamp file. AC_DEFUN(AM_CONFIG_HEADER, [AC_PREREQ([2.12]) AC_CONFIG_HEADER([$1]) dnl When config.status generates a header, we must update the stamp-h file. dnl This file resides in the same directory as the config header dnl that is generated. We must strip everything past the first ":", dnl and everything past the last "/". AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, <>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, <>; do case " <<$>>CONFIG_HEADERS " in *" <<$>>am_file "*<<)>> echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx ;; esac am_indx=`expr "<<$>>am_indx" + 1` done<<>>dnl>>) changequote([,]))]) # Add --enable-maintainer-mode option to configure. # From Jim Meyering # serial 1 AC_DEFUN(AM_MAINTAINER_MODE, [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) AC_MSG_RESULT($USE_MAINTAINER_MODE) AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl ] ) # Define a conditional. AC_DEFUN(AM_CONDITIONAL, [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi]) # Macro to add for using GNU gettext. # Ulrich Drepper , 1995. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License # but which still want to provide support for the GNU gettext functionality. # Please note that the actual code is *not* freely available. # serial 5 AC_DEFUN(AM_WITH_NLS, [AC_MSG_CHECKING([whether NLS is requested]) dnl Default is enabled NLS AC_ARG_ENABLE(nls, [ --disable-nls do not use Native Language Support], USE_NLS=$enableval, USE_NLS=yes) AC_MSG_RESULT($USE_NLS) AC_SUBST(USE_NLS) USE_INCLUDED_LIBINTL=no dnl If we use NLS figure out what method if test "$USE_NLS" = "yes"; then AC_DEFINE(ENABLE_NLS) AC_MSG_CHECKING([whether included gettext is requested]) AC_ARG_WITH(included-gettext, [ --with-included-gettext use the GNU gettext library included here], nls_cv_force_use_gnu_gettext=$withval, nls_cv_force_use_gnu_gettext=no) AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then dnl User does not insist on using GNU NLS library. Figure out what dnl to use. If gettext or catgets are available (in this order) we dnl use this. Else we have to fall back to GNU NLS library. dnl catgets is only used if permitted by option --with-catgets. nls_cv_header_intl= nls_cv_header_libgt= CATOBJEXT=NONE AC_CHECK_HEADER(libintl.h, [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc, [AC_TRY_LINK([#include ], [return (int) gettext ("")], gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)]) if test "$gt_cv_func_gettext_libc" != "yes"; then AC_CHECK_LIB(intl, bindtextdomain, [AC_CACHE_CHECK([for gettext in libintl], gt_cv_func_gettext_libintl, [AC_CHECK_LIB(intl, gettext, gt_cv_func_gettext_libintl=yes, gt_cv_func_gettext_libintl=no)], gt_cv_func_gettext_libintl=no)]) fi if test "$gt_cv_func_gettext_libc" = "yes" \ || test "$gt_cv_func_gettext_libintl" = "yes"; then AC_DEFINE(HAVE_GETTEXT) AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl if test "$MSGFMT" != "no"; then AC_CHECK_FUNCS(dcgettext) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; return _nl_msg_cat_cntr], [CATOBJEXT=.gmo DATADIRNAME=share], [CATOBJEXT=.mo DATADIRNAME=lib]) INSTOBJEXT=.mo fi fi ]) if test "$CATOBJEXT" = "NONE"; then AC_MSG_CHECKING([whether catgets can be used]) AC_ARG_WITH(catgets, [ --with-catgets use catgets functions if available], nls_cv_use_catgets=$withval, nls_cv_use_catgets=no) AC_MSG_RESULT($nls_cv_use_catgets) if test "$nls_cv_use_catgets" = "yes"; then dnl No gettext in C library. Try catgets next. AC_CHECK_LIB(i, main) AC_CHECK_FUNC(catgets, [AC_DEFINE(HAVE_CATGETS) INTLOBJS="\$(CATOBJS)" AC_PATH_PROG(GENCAT, gencat, no)dnl if test "$GENCAT" != "no"; then AC_PATH_PROG(GMSGFMT, gmsgfmt, no) if test "$GMSGFMT" = "no"; then AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no) fi AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) USE_INCLUDED_LIBINTL=yes CATOBJEXT=.cat INSTOBJEXT=.cat DATADIRNAME=lib INTLDEPS='$(top_builddir)/intl/libintl.a' INTLLIBS=$INTLDEPS LIBS=`echo $LIBS | sed -e 's/-lintl//'` nls_cv_header_intl=intl/libintl.h nls_cv_header_libgt=intl/libgettext.h fi]) fi fi if test "$CATOBJEXT" = "NONE"; then dnl Neither gettext nor catgets in included in the C library. dnl Fall back on GNU gettext library. nls_cv_use_gnu_gettext=yes fi fi if test "$nls_cv_use_gnu_gettext" = "yes"; then dnl Mark actions used to generate GNU NLS library. INTLOBJS="\$(GETTOBJS)" AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt) AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) AC_SUBST(MSGFMT) USE_INCLUDED_LIBINTL=yes CATOBJEXT=.gmo INSTOBJEXT=.mo DATADIRNAME=share INTLDEPS='$(top_builddir)/intl/libintl.a' INTLLIBS=$INTLDEPS LIBS=`echo $LIBS | sed -e 's/-lintl//'` nls_cv_header_intl=intl/libintl.h nls_cv_header_libgt=intl/libgettext.h fi dnl Test whether we really found GNU xgettext. if test "$XGETTEXT" != ":"; then dnl If it is no GNU xgettext we define it as : so that the dnl Makefiles still can work. if $XGETTEXT --omit-header /dev/null 2> /dev/null; then : ; else AC_MSG_RESULT( [found xgettext program is not GNU xgettext; ignore it]) XGETTEXT=":" fi fi # We need to process the po/ directory. POSUB=po else DATADIRNAME=share nls_cv_header_intl=intl/libintl.h nls_cv_header_libgt=intl/libgettext.h fi AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl) AC_OUTPUT_COMMANDS( [case "$CONFIG_FILES" in *po/Makefile.in*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac]) # If this is used in GNU gettext we have to set USE_NLS to `yes' # because some of the sources are only built for this goal. if test "$PACKAGE" = gettext; then USE_NLS=yes USE_INCLUDED_LIBINTL=yes fi dnl These rules are solely for the distribution goal. While doing this dnl we only have to keep exactly one list of the available catalogs dnl in configure.in. for lang in $ALL_LINGUAS; do GMOFILES="$GMOFILES $lang.gmo" POFILES="$POFILES $lang.po" done dnl Make all variables we use known to autoconf. AC_SUBST(USE_INCLUDED_LIBINTL) AC_SUBST(CATALOGS) AC_SUBST(CATOBJEXT) AC_SUBST(DATADIRNAME) AC_SUBST(GMOFILES) AC_SUBST(INSTOBJEXT) AC_SUBST(INTLDEPS) AC_SUBST(INTLLIBS) AC_SUBST(INTLOBJS) AC_SUBST(POFILES) AC_SUBST(POSUB) ]) AC_DEFUN(AM_GNU_GETTEXT, [AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_ISC_POSIX])dnl AC_REQUIRE([AC_HEADER_STDC])dnl AC_REQUIRE([AC_C_CONST])dnl AC_REQUIRE([AC_C_INLINE])dnl AC_REQUIRE([AC_TYPE_OFF_T])dnl AC_REQUIRE([AC_TYPE_SIZE_T])dnl AC_REQUIRE([AC_FUNC_ALLOCA])dnl AC_REQUIRE([AC_FUNC_MMAP])dnl AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \ unistd.h sys/param.h]) AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ strdup __argz_count __argz_stringify __argz_next]) if test "${ac_cv_func_stpcpy+set}" != "set"; then AC_CHECK_FUNCS(stpcpy) fi if test "${ac_cv_func_stpcpy}" = "yes"; then AC_DEFINE(HAVE_STPCPY) fi AM_LC_MESSAGES AM_WITH_NLS if test "x$CATOBJEXT" != "x"; then if test "x$ALL_LINGUAS" = "x"; then LINGUAS= else AC_MSG_CHECKING(for catalogs to be installed) NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; esac done LINGUAS=$NEW_LINGUAS AC_MSG_RESULT($LINGUAS) fi dnl Construct list of names of catalog files to be constructed. if test -n "$LINGUAS"; then for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done fi fi dnl The reference to in the installed file dnl must be resolved because we cannot expect the users of this dnl to define HAVE_LOCALE_H. if test $ac_cv_header_locale_h = yes; then INCLUDE_LOCALE_H="#include " else INCLUDE_LOCALE_H="\ /* The system does not provide the header . Take care yourself. */" fi AC_SUBST(INCLUDE_LOCALE_H) dnl Determine which catalog format we have (if any is needed) dnl For now we know about two different formats: dnl Linux libc-5 and the normal X/Open format test -d intl || mkdir intl if test "$CATOBJEXT" = ".cat"; then AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen) dnl Transform the SED scripts while copying because some dumb SEDs dnl cannot handle comments. sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed fi dnl po2tbl.sed is always needed. sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed dnl In the intl/Makefile.in we have a special dependency which makes dnl only sense for gettext. We comment this out for non-gettext dnl packages. if test "$PACKAGE" = "gettext"; then GT_NO="#NO#" GT_YES= else GT_NO= GT_YES="#YES#" fi AC_SUBST(GT_NO) AC_SUBST(GT_YES) dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly dnl find the mkinstalldirs script in another subdir but ($top_srcdir). dnl Try to locate is. MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" fi if test -z "$MKINSTALLDIRS"; then MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi AC_SUBST(MKINSTALLDIRS) dnl *** For now the libtool support in intl/Makefile is not for real. l= AC_SUBST(l) dnl Generate list of files to be processed by xgettext which will dnl be included in po/Makefile. test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then posrcprefix="$srcdir/" else posrcprefix="../$srcdir/" fi else posrcprefix="../" fi rm -f po/POTFILES sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ < $srcdir/po/POTFILES.in > po/POTFILES ]) # Search path for a program which passes the given test. # Ulrich Drepper , 1996. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License # but which still want to provide support for the GNU gettext functionality. # Please note that the actual code is *not* freely available. # serial 1 dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) AC_DEFUN(AM_PATH_PROG_WITH_TEST, [# Extract the first word of "$2", so it can be a program name with args. set dummy $2; ac_word=[$]2 AC_MSG_CHECKING([for $ac_word]) AC_CACHE_VAL(ac_cv_path_$1, [case "[$]$1" in /*) ac_cv_path_$1="[$]$1" # Let the user override the test with a path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in ifelse([$5], , $PATH, [$5]); do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if [$3]; then ac_cv_path_$1="$ac_dir/$ac_word" break fi fi done IFS="$ac_save_ifs" dnl If no 4th arg is given, leave the cache variable unset, dnl so AC_PATH_PROGS will keep looking. ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" ])dnl ;; esac])dnl $1="$ac_cv_path_$1" if test -n "[$]$1"; then AC_MSG_RESULT([$]$1) else AC_MSG_RESULT(no) fi AC_SUBST($1)dnl ]) # Check whether LC_MESSAGES is available in . # Ulrich Drepper , 1995. # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU Public License # but which still want to provide support for the GNU gettext functionality. # Please note that the actual code is *not* freely available. # serial 1 AC_DEFUN(AM_LC_MESSAGES, [if test $ac_cv_header_locale_h = yes; then AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, [AC_TRY_LINK([#include ], [return LC_MESSAGES], am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) if test $am_cv_val_LC_MESSAGES = yes; then AC_DEFINE(HAVE_LC_MESSAGES) fi fi])