Building Lua, IM, CD and IUP in Linux

This is a guide to build all the Lua, IM, CD and IUP libraries in Linux. Notice that you may not use all the libraries, although this guide will show you how to build all of them. You may then choose to build specific libraries.

The Linux used as reference is the Ubuntu distribution.

System Configuration

To build the libraries you will have to download the development version of some packages installed on your system. Although the run time version of some of these packages are already installed, the development versions are usually not. The packages described here are for Ubuntu, but you will be able to identify them for other systems as well.

To build Lua you will need:

libreadline5-dev

To build IM you will need:

g++

To build CD you will need:

libfreetype6-dev
libx11-dev
libxpm-dev
libxmu-dev
  libxft-dev (for the XRender driver, OPTIONAL)
libgtk2.0-dev (for the GDK driver)

To build IUP you will need:

libgtk2.0-dev (for the GTK driver) [already installed for CD]
  libmotif-dev and x11proto-print-dev (for the Motif driver, OPTIONAL)
libgl1-mesa-dev and libglu1-mesa-dev (for the IupGLCanvas)

To install them you can use the Synaptic Package Manager and select the packages, or can use the command line and type:

sudo apt-get install package_name

Source Download

Download the "xxx-X.X_Sources.tar.gz" package from the "Docs and Sources" directory for the version you want to build. Here are links for the Files section in Source Forge:

Lua - http://sourceforge.net/projects/luabinaries/files/
IM - http://sourceforge.net/projects/imtoolkit/files/
CD - http://sourceforge.net/projects/canvasdraw/files/
IUP - http://sourceforge.net/projects/iup/files/

Unpacking

To extract the files use the tar command at a common directory, for example:

mkdir -p xxxx
cd xxxx

[copy the downloaded files, to the xxxx directory]

tar -xpvzf iup-3.2_Sources.tar.gz
tar -xpvzf cd-5.4_Sources.tar.gz
tar -xpvzf im-3.6.2_Sources.tar.gz
tar -xpvzf lua5_1_4_Sources.tar.gz    [optional, see note bellow]

If you are going to build all the libraries, the makefiles and projects expect the following directory tree:

/xxxx/
      cd/
      im/
      iup/
      lua5.1/    [optional, see note bellow]

If you unpack all the source packages in the same directory, that structure will be automatically created.

Lua

Although we use Lua from LuaBinaries, any Lua installation can also be used. In Ubuntu, the Lua run time package is:

lua5.1

And the Lua development package is:

liblua5.1-0-dev

To use them, instead of using the directory "/xxxx/lua5.1" described above, you will have to define some environment variables before building IM, CD and IUP:

export LUA_SUFFIX=
export LUA_INC=/usr/include/lua5.1

Building

As a general rule (excluding system dependencies): IUP depends on CD and IM, and CD depends on IM. So start by build IM, then CD, then IUP.

To start building go the the "src" directory and type "make". In IUP there are many "srcxxx" folders, so go to the up directory "iup" and type "make" that all the sub folders will be built. For example:

cd im/src
make
cd ../..

cd cd/src
make
cd ../..

cd iup
make
cd ..

TIP: Instead of building all the libraries, try building only the libraries you are going to use. The provided makefiles will build all the libraries, but take a look inside them and you will figure out how to build just one library.

Pre-compiled Binaries

Instead of building from sources you can try to use the pre-compiled binaries. Usually they were build in the latest Ubuntu versions for 32 and 64 bits. The packages are located in the "Linux Libraries" directory under the Files section in Source Forge, with "xxx-X.X_Linux26g4_lib.tar.gz" and "xxx-X.X_Linux26g4_64_lib.tar.gz" names.

Do not extract different pre-compiled binaries in the same directory, create a subdirectory for each one, for example:

mkdir iup
cd iup
tar -xpvzf ../iup-3.2_Linux26g4_lib.tar.gz
cd ..

mkdir cd
cd cd
tar -xpvzf ../cd-5.4_Linux26g4_lib.tar.gz
cd ..

mkdir im
cd im
tar -xpvzf ../im-3.6.2_Linux26g4_lib.tar.gz
cd ..

For the installation instructions bellow, remove the "lib/Linux26g4" from the following examples if you are using the pre-compiled binaries.

Installation (System Directory)

After building you can copy the libraries files to the system directory. If you are inside the main directory, to install the run time libraries you can type, for example:

sudo cp -f iup/lib/Linux26g4/*.so /usr/lib               [script version: install ]
sudo cp -f cd/lib/Linux26g4/*.so /usr/lib                               
sudo cp -f im/lib/Linux26g4/*.so /usr/lib

To install the development files, then do:

sudo mkdir -p /usr/include/iup                           [script version: install_dev ]
sudo cp -f iup/include/*.h /usr/include/iup             
sudo cp -f iup/lib/Linux26g4/*.a /usr/lib                               

sudo mkdir -p /usr/include/cd
sudo cp -f cd/include/*.h /usr/include/cd
sudo cp -f cd/lib/Linux26g4/*.a /usr/lib

sudo mkdir -p /usr/include/im
sudo cp -fR im/include/*.h /usr/include/im
sudo cp -f im/lib/Linux26g4/*.a /usr/lib

Then in your makefile use -Iiup -Icd -Iim for includes. There is no need to specify the libraries directory with -L. Development files are only necessary if you are going to compile an application or library in C/C++ that uses there libraries. To just run Lua scripts they are not necessary.

Installation (Build Directory) [Alternative]

If you don't want to copy the run time libraries to your system directory, you can use them from build directory. You will need to add the run time libraries folders to the LD_LIBRARY_PATH, for example:

export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/xxxx/iup/lib/Linux26g4:/xxxx/cd/lib/Linux26g4:/xxxx/im/lib/Linux26g4

And in your makefile will will also need to specify those paths when linking using -L/xxxx/iup/lib/Linux26g4, and for compiling use -I/xxxx/iup/include.

Installation (Lua Modules)

Lua modules in Ubuntu are installed in the "/usr/lib/lua/5.1" directory. So to be able to use the Lua "require" with IUP, CD and IM you must create symbolic links inside that directory.

sudo mkdir -p /usr/lib/lua/5.1                          [script version: config_lua_module ]
cd /usr/lib/lua/5.1  
       
sudo ln -fs /usr/lib/libiuplua51.so iuplua.so
sudo ln -fs /usr/lib/libiupluacontrols51.so iupluacontrols.so
...

Using those links you do not need any extra configuration.

Installation (Lua Modules) [Alternative]

If you use the alternative installation directory, and you also do NOT use the LuaBinaries installation, then you must set the LUA_CPATH environment variable:

export LUA_CPATH=./\?.so\;./lib\?.so\;./lib\?51.so\;