diff options
-rw-r--r-- | Changes | 2 | ||||
-rw-r--r-- | ev.c | 184 | ||||
-rw-r--r-- | ev.h | 1 | ||||
-rw-r--r-- | ev.pod | 21 | ||||
-rw-r--r-- | ev_vars.h | 5 | ||||
-rw-r--r-- | ev_wrap.h | 6 |
6 files changed, 134 insertions, 85 deletions
@@ -4,6 +4,7 @@ TODO: ev_time_freeze, ev_time_thaw TODO: ev_walk TODO: ev_stop_all TODO: fix signal handling(?) under win32 +3.54 - do not leave the event loop early just because we have no active watchers, fixing a problem when embedding a kqueue loop that has active kernel events but no registered watchers @@ -11,6 +12,7 @@ TODO: fix signal handling(?) under win32 - correctly zero the idx values for arrays, so destroying and reinitialising the default loop actually works (patch by Malek Hadj-Ali). + - new EV_CUSTOM revents flag for use by applications. 3.53 Sun Feb 15 02:38:20 CET 2009 - fix a bug in event pipe creation on win32 that would cause a @@ -572,7 +572,7 @@ ev_time (void) return tv.tv_sec + tv.tv_usec * 1e-6; } -ev_tstamp inline_size +inline_size ev_tstamp get_clock (void) { #if EV_USE_MONOTONIC @@ -627,7 +627,7 @@ ev_sleep (ev_tstamp delay) #define MALLOC_ROUND 4096 /* prefer to allocate in chunks of this size, must be 2**n and >> 4 longs */ -int inline_size +inline_size int array_nextsize (int elem, int cur, int cnt) { int ncur = cur + 1; @@ -699,7 +699,22 @@ ev_feed_event (EV_P_ void *w, int revents) } } -void inline_speed +inline_speed void +feed_reverse (EV_P_ W w) +{ + array_needsize (W, rfeeds, rfeedmax, rfeedcnt + 1, EMPTY2); + rfeeds [rfeedcnt++] = w; +} + +inline_size void +feed_reverse_done (EV_P_ int revents) +{ + do + ev_feed_event (EV_A_ rfeeds [--rfeedcnt], revents); + while (rfeedcnt); +} + +inline_speed void queue_events (EV_P_ W *events, int eventcnt, int type) { int i; @@ -710,7 +725,7 @@ queue_events (EV_P_ W *events, int eventcnt, int type) /*****************************************************************************/ -void inline_speed +inline_speed void fd_event (EV_P_ int fd, int revents) { ANFD *anfd = anfds + fd; @@ -732,7 +747,7 @@ ev_feed_fd_event (EV_P_ int fd, int revents) fd_event (EV_A_ fd, revents); } -void inline_size +inline_size void fd_reify (EV_P) { int i; @@ -776,7 +791,7 @@ fd_reify (EV_P) fdchangecnt = 0; } -void inline_size +inline_size void fd_change (EV_P_ int fd, int flags) { unsigned char reify = anfds [fd].reify; @@ -790,7 +805,7 @@ fd_change (EV_P_ int fd, int flags) } } -void inline_speed +inline_speed void fd_kill (EV_P_ int fd) { ev_io *w; @@ -802,7 +817,7 @@ fd_kill (EV_P_ int fd) } } -int inline_size +inline_size int fd_valid (int fd) { #ifdef _WIN32 @@ -875,7 +890,7 @@ fd_rearm_all (EV_P) #define UPHEAP_DONE(p,k) ((p) == (k)) /* away from the root */ -void inline_speed +inline_speed void downheap (ANHE *heap, int N, int k) { ANHE he = heap [k]; @@ -925,7 +940,7 @@ downheap (ANHE *heap, int N, int k) #define UPHEAP_DONE(p,k) (!(p)) /* away from the root */ -void inline_speed +inline_speed void downheap (ANHE *heap, int N, int k) { ANHE he = heap [k]; @@ -955,7 +970,7 @@ downheap (ANHE *heap, int N, int k) #endif /* towards the root */ -void inline_speed +inline_speed void upheap (ANHE *heap, int k) { ANHE he = heap [k]; @@ -976,7 +991,7 @@ upheap (ANHE *heap, int k) ev_active (ANHE_w (he)) = k; } -void inline_size +inline_size void adjustheap (ANHE *heap, int N, int k) { if (k > HEAP0 && ANHE_at (heap [HPARENT (k)]) >= ANHE_at (heap [k])) @@ -986,7 +1001,7 @@ adjustheap (ANHE *heap, int N, int k) } /* rebuild the heap: this function is used only once and executed rarely */ -void inline_size +inline_size void reheap (ANHE *heap, int N) { int i; @@ -1012,7 +1027,7 @@ static EV_ATOMIC_T gotsig; /*****************************************************************************/ -void inline_speed +inline_speed void fd_intern (int fd) { #ifdef _WIN32 @@ -1052,7 +1067,7 @@ evpipe_init (EV_P) } } -void inline_size +inline_size void evpipe_write (EV_P_ EV_ATOMIC_T *flag) { if (!*flag) @@ -1166,7 +1181,7 @@ static ev_signal childev; # define WIFCONTINUED(status) 0 #endif -void inline_speed +inline_speed void child_reap (EV_P_ int chain, int pid, int status) { ev_child *w; @@ -1454,6 +1469,7 @@ loop_destroy (EV_P) ev_free (anfds); anfdmax = 0; /* have to use the microsoft-never-gets-it-right macro */ + array_free (rfeed, EMPTY); array_free (fdchange, EMPTY); array_free (timer, EMPTY); #if EV_PERIODIC_ENABLE @@ -1472,10 +1488,10 @@ loop_destroy (EV_P) } #if EV_USE_INOTIFY -void inline_size infy_fork (EV_P); +inline_size void infy_fork (EV_P); #endif -void inline_size +inline_size void loop_fork (EV_P) { #if EV_USE_PORT @@ -1722,7 +1738,7 @@ ev_invoke (EV_P_ void *w, int revents) EV_CB_INVOKE ((W)w, revents); } -void inline_speed +inline_speed void call_pending (EV_P) { int pri; @@ -1744,7 +1760,7 @@ call_pending (EV_P) } #if EV_IDLE_ENABLE -void inline_size +inline_size void idle_reify (EV_P) { if (expect_false (idleall)) @@ -1766,83 +1782,97 @@ idle_reify (EV_P) } #endif -void inline_size +inline_size void timers_reify (EV_P) { EV_FREQUENT_CHECK; - while (timercnt && ANHE_at (timers [HEAP0]) < mn_now) + if (timercnt && ANHE_at (timers [HEAP0]) < mn_now) { - ev_timer *w = (ev_timer *)ANHE_w (timers [HEAP0]); + do + { + ev_timer *w = (ev_timer *)ANHE_w (timers [HEAP0]); - /*assert (("libev: inactive timer on timer heap detected", ev_is_active (w)));*/ + /*assert (("libev: inactive timer on timer heap detected", ev_is_active (w)));*/ - /* first reschedule or stop timer */ - if (w->repeat) - { - ev_at (w) += w->repeat; - if (ev_at (w) < mn_now) - ev_at (w) = mn_now; + /* first reschedule or stop timer */ + if (w->repeat) + { + ev_at (w) += w->repeat; + if (ev_at (w) < mn_now) + ev_at (w) = mn_now; + + assert (("libev: negative ev_timer repeat value found while processing timers", w->repeat > 0.)); - assert (("libev: negative ev_timer repeat value found while processing timers", w->repeat > 0.)); + ANHE_at_cache (timers [HEAP0]); + downheap (timers, timercnt, HEAP0); + } + else + ev_timer_stop (EV_A_ w); /* nonrepeating: stop timer */ - ANHE_at_cache (timers [HEAP0]); - downheap (timers, timercnt, HEAP0); + EV_FREQUENT_CHECK; + feed_reverse (EV_A_ (W)w); } - else - ev_timer_stop (EV_A_ w); /* nonrepeating: stop timer */ + while (timercnt && ANHE_at (timers [HEAP0]) < mn_now); - EV_FREQUENT_CHECK; - ev_feed_event (EV_A_ (W)w, EV_TIMEOUT); + feed_reverse_done (EV_A_ EV_TIMEOUT); } } #if EV_PERIODIC_ENABLE -void inline_size +inline_size void periodics_reify (EV_P) { EV_FREQUENT_CHECK; while (periodiccnt && ANHE_at (periodics [HEAP0]) < ev_rt_now) { - ev_periodic *w = (ev_periodic *)ANHE_w (periodics [HEAP0]); - - /*assert (("libev: inactive timer on periodic heap detected", ev_is_active (w)));*/ + int feed_count = 0; - /* first reschedule or stop timer */ - if (w->reschedule_cb) + do { - ev_at (w) = w->reschedule_cb (w, ev_rt_now); + ev_periodic *w = (ev_periodic *)ANHE_w (periodics [HEAP0]); - assert (("libev: ev_periodic reschedule callback returned time in the past", ev_at (w) >= ev_rt_now)); + /*assert (("libev: inactive timer on periodic heap detected", ev_is_active (w)));*/ - ANHE_at_cache (periodics [HEAP0]); - downheap (periodics, periodiccnt, HEAP0); - } - else if (w->interval) - { - ev_at (w) = w->offset + ceil ((ev_rt_now - w->offset) / w->interval) * w->interval; - /* if next trigger time is not sufficiently in the future, put it there */ - /* this might happen because of floating point inexactness */ - if (ev_at (w) - ev_rt_now < TIME_EPSILON) + /* first reschedule or stop timer */ + if (w->reschedule_cb) + { + ev_at (w) = w->reschedule_cb (w, ev_rt_now); + + assert (("libev: ev_periodic reschedule callback returned time in the past", ev_at (w) >= ev_rt_now)); + + ANHE_at_cache (periodics [HEAP0]); + downheap (periodics, periodiccnt, HEAP0); + } + else if (w->interval) { - ev_at (w) += w->interval; + ev_at (w) = w->offset + ceil ((ev_rt_now - w->offset) / w->interval) * w->interval; + /* if next trigger time is not sufficiently in the future, put it there */ + /* this might happen because of floating point inexactness */ + if (ev_at (w) - ev_rt_now < TIME_EPSILON) + { + ev_at (w) += w->interval; + + /* if interval is unreasonably low we might still have a time in the past */ + /* so correct this. this will make the periodic very inexact, but the user */ + /* has effectively asked to get triggered more often than possible */ + if (ev_at (w) < ev_rt_now) + ev_at (w) = ev_rt_now; + } - /* if interval is unreasonably low we might still have a time in the past */ - /* so correct this. this will make the periodic very inexact, but the user */ - /* has effectively asked to get triggered more often than possible */ - if (ev_at (w) < ev_rt_now) - ev_at (w) = ev_rt_now; + ANHE_at_cache (periodics [HEAP0]); + downheap (periodics, periodiccnt, HEAP0); } + else + ev_periodic_stop (EV_A_ w); /* nonrepeating: stop timer */ - ANHE_at_cache (periodics [HEAP0]); - downheap (periodics, periodiccnt, HEAP0); + EV_FREQUENT_CHECK; + feed_reverse (EV_A_ (W)w); } - else - ev_periodic_stop (EV_A_ w); /* nonrepeating: stop timer */ + while (periodiccnt && ANHE_at (periodics [HEAP0]) < ev_rt_now); - EV_FREQUENT_CHECK; - ev_feed_event (EV_A_ (W)w, EV_PERIODIC); + feed_reverse_done (EV_A_ EV_PERIODIC); } } @@ -1868,7 +1898,7 @@ periodics_reschedule (EV_P) } #endif -void inline_speed +inline_speed void time_update (EV_P_ ev_tstamp max_block) { int i; @@ -2016,8 +2046,6 @@ ev_loop (EV_P_ int flags) /* update time to cancel out callback processing overhead */ time_update (EV_A_ 1e100); - waittime = MAX_BLOCKTIME; - if (timercnt) { ev_tstamp to = ANHE_at (timers [HEAP0]) - mn_now + backend_fudge; @@ -2089,14 +2117,14 @@ ev_unloop (EV_P_ int how) /*****************************************************************************/ -void inline_size +inline_size void wlist_add (WL *head, WL elem) { elem->next = *head; *head = elem; } -void inline_size +inline_size void wlist_del (WL *head, WL elem) { while (*head) @@ -2111,7 +2139,7 @@ wlist_del (WL *head, WL elem) } } -void inline_speed +inline_speed void clear_pending (EV_P_ W w) { if (w->pending) @@ -2138,7 +2166,7 @@ ev_clear_pending (EV_P_ void *w) return 0; } -void inline_size +inline_size void pri_adjust (EV_P_ W w) { int pri = w->priority; @@ -2147,7 +2175,7 @@ pri_adjust (EV_P_ W w) w->priority = pri; } -void inline_speed +inline_speed void ev_start (EV_P_ W w, int active) { pri_adjust (EV_A_ w); @@ -2155,7 +2183,7 @@ ev_start (EV_P_ W w, int active) ev_ref (EV_A); } -void inline_size +inline_size void ev_stop (EV_P_ W w) { ev_unref (EV_A); @@ -2590,7 +2618,7 @@ infy_cb (EV_P_ ev_io *w, int revents) infy_wd (EV_A_ ev->wd, ev->wd, ev); } -void inline_size +inline_size void check_2625 (EV_P) { /* kernels < 2.6.25 are borked @@ -2613,7 +2641,7 @@ check_2625 (EV_P) fs_2625 = 1; } -void inline_size +inline_size void infy_init (EV_P) { if (fs_fd != -2) @@ -2633,7 +2661,7 @@ infy_init (EV_P) } } -void inline_size +inline_size void infy_fork (EV_P) { int slot; @@ -147,6 +147,7 @@ struct ev_loop; #define EV_EMBED 0x00010000 /* embedded event loop needs sweep */ #define EV_FORK 0x00020000 /* event loop resumed in child */ #define EV_ASYNC 0x00040000 /* async intra-loop signal */ +#define EV_CUSTOM 0x01000000 /* for use by user code */ #define EV_ERROR 0x80000000 /* sent when an error occurs */ /* can be used to add custom fields to all watchers, while losing binary compatibility */ @@ -728,13 +728,15 @@ If you have a watcher you never unregister that should not keep C<ev_loop> from returning, call ev_unref() after starting, and ev_ref() before stopping it. -As an example, libev itself uses this for its internal signal pipe: It is -not visible to the libev user and should not keep C<ev_loop> from exiting -if no event watchers registered by it are active. It is also an excellent -way to do this for generic recurring timers or from within third-party -libraries. Just remember to I<unref after start> and I<ref before stop> -(but only if the watcher wasn't active before, or was active before, -respectively). +As an example, libev itself uses this for its internal signal pipe: It +is not visible to the libev user and should not keep C<ev_loop> from +exiting if no event watchers registered by it are active. It is also an +excellent way to do this for generic recurring timers or from within +third-party libraries. Just remember to I<unref after start> and I<ref +before stop> (but only if the watcher wasn't active before, or was active +before, respectively. Note also that libev might stop watchers itself +(e.g. non-repeating timers) in which case you have to C<ev_ref> +in the callback). Example: Create a signal watcher, but keep it from keeping C<ev_loop> running when nothing else is active. @@ -928,6 +930,11 @@ C<ev_fork>). The given async watcher has been asynchronously notified (see C<ev_async>). +=item C<EV_CUSTOM> + +Not ever sent (or otherwise used) by libev itself, but can be freely used +by libev users to signal watchers (e.g. via C<ev_feed_event>). + =item C<EV_ERROR> An unspecified error has occurred, the watcher has been stopped. This might @@ -111,6 +111,11 @@ VAR (pendings, ANPENDING *pendings [NUMPRI]) VAR (pendingmax, int pendingmax [NUMPRI]) VAR (pendingcnt, int pendingcnt [NUMPRI]) +/* for reverse feeding of events */ +VARx(W *, rfeeds) +VARx(int, rfeedmax) +VARx(int, rfeedcnt) + VARx(int *, fdchanges) VARx(int, fdchangemax) VARx(int, fdchangecnt) @@ -43,6 +43,9 @@ #define pendings ((loop)->pendings) #define pendingmax ((loop)->pendingmax) #define pendingcnt ((loop)->pendingcnt) +#define rfeeds ((loop)->rfeeds) +#define rfeedmax ((loop)->rfeedmax) +#define rfeedcnt ((loop)->rfeedcnt) #define fdchanges ((loop)->fdchanges) #define fdchangemax ((loop)->fdchangemax) #define fdchangecnt ((loop)->fdchangecnt) @@ -117,6 +120,9 @@ #undef pendings #undef pendingmax #undef pendingcnt +#undef rfeeds +#undef rfeedmax +#undef rfeedcnt #undef fdchanges #undef fdchangemax #undef fdchangecnt |