module piodev1(
    input nIN_CH,
    output nCS_CH,

    inout [0:7] D,

    output A20_SRAM,
    output nCS_SRAM,

    input nRD,
    input nWR,

    input CLK,

    output nCS_SW,
    output WR_LEDS,

    input SWRESET,
    input RECOVERY,

    output nIN10,
    input nCS0,
    input nCS2,
    output SBEN,

    inout [0:7] PD,

    input A0,
    input A1,
    input A2,
    input A3,
    input A20,
    input A21,
    input A22,

    output A20_FLASH,
    output nCS_FLASH,

    output nCS_PORTA,
    output nCS_PORTB,
    output A0_PORTA,
    output nRST_FT,

    input NRST
    );

wire CS0 = !nCS0;
wire CS2 = !nCS2;

wire CS_FLASH = CS2;
wire CS_PORTA = CS0;

assign nCS_FLASH = !CS_FLASH;
assign nCS_PORTA = !CS_PORTA;

assign SBEN = 1'b1;

assign A20_FLASH = A20;

assign A0_PORTA = 1'b0;

assign nCS_PORTB = 1'b1;
assign nRST_FT = 1'b1;

reg PDtoD = 1'b0;
reg [7:0] buffer = 0;

wire activateOutput = CS0 | CS2;

always @(negedge nWR or negedge nRD) begin
  if (!nWR) begin
    PDtoD <= 1'b0;
  end

  if (!nRD) begin
    PDtoD <= 1'b1;
  end
end

always @(posedge nWR or posedge nRD) begin
  if (nWR) begin
    buffer <= D;
  end

  if (nRD) begin
    buffer <= PD;
  end
end

assign D = (PDtoD && activateOutput) ? buffer : 8'bzzzzzzzz;
assign PD = !PDtoD ? buffer : 8'bzzzzzzzz;

endmodule