summaryrefslogtreecommitdiff
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rw-r--r--tests/ChangeLog1017
-rw-r--r--tests/GNUmakefile10
-rw-r--r--tests/Makefile9
-rw-r--r--tests/benchtest1.c117
-rw-r--r--tests/benchtest2.c183
-rw-r--r--tests/cancel5.c354
-rw-r--r--tests/exception1.c462
-rw-r--r--tests/inherit1.c99
-rw-r--r--tests/mutex3.c3
-rw-r--r--tests/mutex4.c65
-rw-r--r--tests/mutex5.c18
-rw-r--r--tests/priority1.c78
-rw-r--r--tests/priority2.c80
13 files changed, 1547 insertions, 948 deletions
diff --git a/tests/ChangeLog b/tests/ChangeLog
index 27f8dfe..231d9fe 100644
--- a/tests/ChangeLog
+++ b/tests/ChangeLog
@@ -1,504 +1,513 @@
-2001-06-8 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * mutex5.c: Insert inert change to quell compiler warnings.
- * condvar3_2.c: Remove unused variable.
-
-2001-06-3 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * condvar2_1.c: New test.
- * condvar3_1.c: New test.
- * condvar3_2.c: New test.
-
-2001-05-30 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * mutex1n.c: New test.
- * mutex1e.c: New test.
- * mutex1r.c: New test.
- * mutex4.c: Now locks and unlocks a mutex.
- * mutex5.c: New test.
- * mutex6.c: New test.
- * mutex6n.c: New test.
- * mutex6e.c: New test.
- * mutex6r.c: New test.
- * Makefile: Added new tests; reorganised.
- * GNUmakefile: Likewise.
- * rwlock6.c: Fix to properly prove read-while-write locking
- and single writer locking.
-
-2001-05-29 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * Makefile: Reorganisation.
- * GNUmakefile: Likewise.
- - Thomas Pfaff <tpfaff@gmx.net>
-
- * exception1.c: Add stdio.h include to define fprintf and stderr
- in non-exception C version of main().
- * exception2.c: Likewise.
- * exception3.c: Likewise.
-
- * Makefile (rwlock7): Add new test.
- * GNUmakefile (rwlock7): Add new test.
- * rwlock7.c: New test.
- * rwlock6.c: Changed to test that writer has priority.
-
- * eyal1.c (main): Unlock each mutex_start lock before destroying
- it.
-
-2000-12-29 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * GNUmakefile: Add mutex4 test; ensure libpthreadw32.a is
- removed for "clean" target.
- * Makefile: Add mutex4 test.
-
- * exception3.c: Remove SEH code; automatically pass the test
- under SEH (which is an N/A environment).
-
- * mutex4.c: New test.
-
- * eyal1.c (do_work_unit): Add a dummy "if" to force the
- optimiser to retain code; reduce thread work loads.
-
- * condvar8.c (main): Add an additional "assert" for debugging;
- increase pthread_cond_signal timeout.
-
-2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * eyal1.c: Increase thread work loads.
- * exception2.c: New test.
- * exception3.c: New test.
- * Makefile: Add new tests exception2.c and exception3.c.
- * GNUmakefile: Likewise.
-
-2000-12-11 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * cleanup3.c: Remove unused variable.
- * cleanup2.c: Likewise.
- * exception1.c: Throw an exception rather than use
- a deliberate zero divide so that catch(...) will
- handle it under Mingw32. Mingw32 now builds the
- library correctly to pass all tests - see Thomas
- Pfaff's detailed instructions re needed changes
- to Mingw32 in the Pthreads-Win32 FAQ.
-
-2000-09-08 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * cancel5.c: New; tests calling pthread_cancel()
- from the main thread without first creating a
- POSIX thread struct for the non-POSIX main thread
- - this forces pthread_cancel() to create one via
- pthread_self().
- * Makefile (cancel5): Add new test.
- * GNUmakefile (cancel5): Likewise.
-
-2000-08-17 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * create2.c: New; Test that pthread_t contains
- the W32 HANDLE before it calls the thread routine
- proper.
-
-2000-08-13 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * condvar3.c: Minor change to eliminate compiler
- warning.
-
- * condvar4.c: ditto.
-
- * condvar5.c: ditto.
-
- * condvar6.c: ditto.
-
- * condvar7.c: ditto.
-
- * condvar8.c: ditto.
-
- * condvar9.c: ditto.
-
- * exit1.c: Function needed return statement.
-
- * cleanup1.c: Remove unnecessary printf arg.
-
- * cleanup2.c: Fix cast.
-
- * rwlock6.c: Fix casts.
-
- * exception1.c (PtW32CatchAll): Had the wrong name;
- fix casts.
-
- * cancel3.c: Remove unused waitLock variable.
-
- * GNUmakefile: Change library/dll naming; add new tests;
- general minor changes.
-
- * Makefile: Change library/dll naming; add targets for
- testing each of the two VC++ EH scheme versions;
- default target now issues help message; compile warnings
- now interpreted as errors to stop the make; add new
- tests; restructure to remove prerequisites needed
- otherwise.
-
- * README: Updated.
-
-
-2000-08-10 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * eyal1.c (main): Change implicit cast to explicit
- cast when passing "print_server" function pointer;
- G++ no longer allows implicit func parameter casts.
-
- * cleanup1.c: Remove unused "waitLock".
- (main): Fix implicit parameter cast.
-
- * cancel2.c (main): Fix implicit parameter cast.
-
- * cancel4.c (main): Fix implicit parameter cast.
-
- * cancel3.c (main): Fix implicit parameter cast.
-
- * GNUmakefile: Renamed from Makefile; Add missing
- cancel1 and cancel2 test targets.
-
- * Makefile: Converted for use with MS nmake.
-
-2000-08-06 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * ccl.bat: Add /nologo to remove extraneous output.
-
- * exception1.c (exceptionedThread): Init 'dummy';
- put expression into if condition to prevent optimising away;
- remove unused variable.
-
- * cancel4.c (mythread): Cast return value to avoid warnings.
-
- * cancel2.c (mythread): Missing #endif.
-
- * condvar9.c (mythread): Cast return value to avoid warnings.
-
- * condvar8.c (mythread): Cast return value to avoid warnings.
-
- * condvar7.c (mythread): Cast return value to avoid warnings.
-
- * cleanup3.c (mythread): Cast return value to avoid warnings.
-
- * cleanup2.c (mythread): Cast return value to avoid warnings.
-
- * cleanup1.c (mythread): Cast return value to avoid warnings.
-
- * condvar5.c (mythread): Cast return value to avoid warnings.
-
- * condvar3.c (mythread): Cast return value to avoid warnings.
-
- * condvar6.c (mythread): Cast return value to avoid warnings.
-
- * condvar4.c (mythread): Cast return value to avoid warnings.
-
-2000-08-05 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * cancel2.c: Use PtW32CatchAll macro if defined.
-
- * exception1.c: Use PtW32CatchAll macro if defined.
-
-2000-08-02 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * tsd1.c: Fix typecasts of &result [g++ is now very fussy].
-
- * test.h (assert): Return 0's explicitly to allay
- g++ errors.
-
- * join2.c: Add explicit typecasts.
-
- * join1.c: Add explicit typecasts.
-
- * join0.c: Add explicit typecasts.
-
- * eyal1.c: Add explicit typecasts.
-
- * count1.c (main): Add type cast to remove g++ parse warning
- [gcc-2.95.2 seems to have tightened up on this].
-
- * Makefile (GLANG): Use c++ explicitly.
- Remove MSVC sections (was commented out).
- Add target to generate cpp output.
-
-2000-07-25 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * runtest.bat: modified to work under W98.
-
- * runall.bat: Add new tests; modified to work under W98.
- It was ok under NT.
-
- * Makefile: Add new tests.
-
- * exception1.c: New; Test passing exceptions back to the
- application and retaining library internal exceptions.
-
- * join0.c: New; Test a single join.
-
-2000-01-06 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * cleanup1.c: New; Test cleanup handler executes (when thread is
- canceled).
-
- * cleanup2.c: New; Test cleanup handler executes (when thread is
- not canceled).
-
- * cleanup3.c: New; Test cleanup handler does not execute
- (when thread is not canceled).
-
-2000-01-04 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * cancel4.c: New; Test cancelation does not occur in deferred
- cancelation threads with no cancelation points.
-
- * cancel3.c: New; Test asynchronous cancelation.
-
- * context1.c: New; Test context switching method for async
- cancelation.
-
-1999-11-23 Ross Johnson <rpj@special.ise.canberra.edu.au>
-
- * test.h: Add header includes; include local header versions rather
- than system versions; rearrange the assert macro defines.
-
-1999-11-07 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * loadfree.c: New. Test loading and freeing the library (DLL).
-
-1999-10-30 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * cancel1.c: New. Test pthread_setcancelstate and
- pthread_setcanceltype functions.
- * eyal1.c (waste_time): Change calculation to avoid FP exception
- on Aplhas
- - Rich Peters <rpeters@micro-magic.com>
-
-Oct 14 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * condvar7.c: New. Test broadcast after waiting thread is canceled.
- * condvar8.c: New. Test multiple broadcasts.
- * condvar9.c: New. Test multiple broadcasts with thread
- cancelation.
-
-Sep 16 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * rwlock6.c: New test.
-
-Sep 15 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * rwlock1.c: New test.
- * rwlock2.c: New test.
- * rwlock3.c: New test.
- * rwlock4.c: New test.
- * rwlock5.c: New test.
-
-Aug 22 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * runall.bat (join2): Add test.
-
-Aug 19 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * join2.c: New test.
-
-Wed Aug 12 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * Makefile (LIBS): Add -L.
-
-Mon May 31 10:25:01 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * Makefile (GLANG): Add GCC language option.
-
-Sat May 29 23:29:04 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * runall.bat (condvar5): Add new test.
-
- * runall.bat (condvar6): Add new test.
-
- * Makefile (condvar5) : Add new test.
-
- * Makefile (condvar6) : Add new test.
-
- * condvar5.c: New test for pthread_cond_broadcast().
-
- * condvar6.c: New test for pthread_cond_broadcast().
-
-Sun Apr 4 12:04:28 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * tsd1.c (mythread): Change Sleep(0) to sched_yield().
- (sched.h): Include.
-
- * condvar3.c (mythread): Remove redundant Sleep().
-
- * runtest.bat: Re-organised to make more informative.
-
-Fri Mar 19 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * *.bat: redirect unwanted output to nul:
-
- * runall.bat: new.
-
- * cancel1.c: new. Not part of suite yet.
-
-Mon Mar 15 00:17:55 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * mutex1.c: only test mutex init and destroy; add assertions.
-
- * count1.c: raise number of spawned threads to 60 (appears to
- be the limit under Win98).
-
-Sun Mar 14 21:31:02 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * test.h (assert): add assertion trace option.
- Use:
- "#define ASSERT_TRACE 1" to turn it on,
- "#define ASSERT_TRACE 0" to turn it off (default).
-
- * condvar3.c (main): add more assertions.
-
- * condvar4.c (main): add more assertions.
-
- * condvar1.c (main): add more assertions.
-
-Fri Mar 12 08:34:15 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * condvar4.c (cvthing): switch the order of the INITIALIZERs.
-
- * eyal1.c (main): Fix trylock loop; was not waiting for thread to lock
- the "started" mutex.
-
-Wed Mar 10 10:41:52 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * tryentercs.c: Apply typo patch from bje.
-
- * tryentercs2.c: Ditto.
-
-Sun Mar 7 10:41:52 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * Makefile (condvar3, condvar4): Add tests.
-
- * condvar4.c (General): Reduce to simple test case; prerequisite
- is condvar3.c; add description.
-
- * condvar3.c (General): Reduce to simple test case; prerequisite
- is condvar2.c; add description.
-
- * condvar2.c (General): Reduce to simple test case; prerequisite
- is condvar1.c; add description.
-
- * condvar1.c (General): Reduce to simple test case; add
- description.
-
- * Template.c (Comments): Add generic test detail.
-
-1999-02-23 Ross Johnson <rpj@ise.canberra.edu.au>
-
- * Template.c: Revamp.
-
- * condvar1.c: Add.
-
- * condvar2.c: Add.
-
- * Makefile: Add condvar1 condvar2 tests.
-
- * exit1.c, exit2.c, exit3.c: Cosmetic changes.
-
-1999-02-23 Ross Johnson <rpj@ise.canberra.edu.au>
-
- * Makefile: Some refinement.
-
- * *.c: More exhaustive checking through assertions; clean up;
- add some more tests.
-
- * Makefile: Now actually runs the tests.
-
- * tests.h: Define our own assert macro. The Mingw32
- version pops up a dialog but we want to run non-interactively.
-
- * equal1.c: use assert a little more directly so that it
- prints the actual call statement.
-
- * exit1.c: Modify to return 0 on success, 1 on failure.
-
-1999-02-22 Ross Johnson <rpj@ise.canberra.edu.au>
-
- * self2.c: Bring up to date.
-
- * self3.c: Ditto.
-
-1999-02-21 Ben Elliston <bje@cygnus.com>
-
- * README: Update.
-
- * Makefile: New file. Run all tests automatically. Primitive tests
- are run first; more complex tests are run last.
-
- * count1.c: New test. Validate the thread count.
-
- * exit2.c: Perform a simpler test.
-
- * exit3.c: New test. Replaces exit2.c, since exit2.c needs to
- perform simpler checking first.
-
- * create1.c: Update to use the new testsuite exiting convention.
-
- * equal1.c: Likewise.
-
- * mutex1.c: Likewise.
-
- * mutex2.c: Likewise.
-
- * once1.c: Likewise.
-
- * self2.c: Likewise.
-
- * self3.c: Likewise.
-
- * tsd1.c: Likewise.
-
-1999-02-20 Ross Johnson <rpj@ise.canberra.edu.au>
-
- * mutex2.c: Test static mutex initialisation.
-
- * test.h: New. Declares a table mapping error numbers to
- error names.
-
-1999-01-17 Ross Johnson <rpj@ise.canberra.edu.au>
-
- * runtest: New script to build and run a test in the tests directory.
-
-Wed Dec 30 11:22:44 1998 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * tsd1.c: Re-written. See comments at start of file.
- * Template.c: New. Contains skeleton code and comment template
- intended to fully document the test.
-
-Fri Oct 16 17:59:49 1998 Ross Johnson <rpj@swan.canberra.edu.au>
-
- * tsd1.c (destroy_key): Add function. Change diagnostics.
-
-Thu Oct 15 17:42:37 1998 Ross Johnson <rpj@swan.canberra.edu.au>
-
- * tsd1.c (mythread): Fix some casts and add some message
- output. Fix inverted conditional.
-
-Mon Oct 12 02:12:29 1998 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
-
- * tsd1.c: New. Test TSD using 1 key and 2 threads.
-
-1998-09-13 Ben Elliston <bje@cygnus.com>
-
- * eyal1.c: New file; contributed by Eyal Lebedinsky
- <eyal@eyal.emu.id.au>.
-
-1998-09-12 Ben Elliston <bje@cygnus.com>
-
- * exit2.c (func): Return a value.
- (main): Call the right thread entry function.
-
-1998-07-22 Ben Elliston <bje@cygnus.com>
-
- * exit2.c (main): Fix size of pthread_t array.
-
-1998-07-10 Ben Elliston <bje@cygnus.com>
-
- * exit2.c: New file; test pthread_exit() harder.
-
- * exit1.c: New file; test pthread_exit().
+2001-06-25 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ priority1.c: New test.
+ priority2.c: New test.
+ inherit1.c: New test.
+ benchtest1.c: New; timing mutexes.
+ benchtest2.c: New; timing mutexes.
+ mutex4.c: Modified to test all mutex types.
+
+2001-06-8 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * mutex5.c: Insert inert change to quell compiler warnings.
+ * condvar3_2.c: Remove unused variable.
+
+2001-06-3 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * condvar2_1.c: New test.
+ * condvar3_1.c: New test.
+ * condvar3_2.c: New test.
+
+2001-05-30 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * mutex1n.c: New test.
+ * mutex1e.c: New test.
+ * mutex1r.c: New test.
+ * mutex4.c: Now locks and unlocks a mutex.
+ * mutex5.c: New test.
+ * mutex6.c: New test.
+ * mutex6n.c: New test.
+ * mutex6e.c: New test.
+ * mutex6r.c: New test.
+ * Makefile: Added new tests; reorganised.
+ * GNUmakefile: Likewise.
+ * rwlock6.c: Fix to properly prove read-while-write locking
+ and single writer locking.
+
+2001-05-29 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * Makefile: Reorganisation.
+ * GNUmakefile: Likewise.
+ - Thomas Pfaff <tpfaff@gmx.net>
+
+ * exception1.c: Add stdio.h include to define fprintf and stderr
+ in non-exception C version of main().
+ * exception2.c: Likewise.
+ * exception3.c: Likewise.
+
+ * Makefile (rwlock7): Add new test.
+ * GNUmakefile (rwlock7): Add new test.
+ * rwlock7.c: New test.
+ * rwlock6.c: Changed to test that writer has priority.
+
+ * eyal1.c (main): Unlock each mutex_start lock before destroying
+ it.
+
+2000-12-29 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * GNUmakefile: Add mutex4 test; ensure libpthreadw32.a is
+ removed for "clean" target.
+ * Makefile: Add mutex4 test.
+
+ * exception3.c: Remove SEH code; automatically pass the test
+ under SEH (which is an N/A environment).
+
+ * mutex4.c: New test.
+
+ * eyal1.c (do_work_unit): Add a dummy "if" to force the
+ optimiser to retain code; reduce thread work loads.
+
+ * condvar8.c (main): Add an additional "assert" for debugging;
+ increase pthread_cond_signal timeout.
+
+2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * eyal1.c: Increase thread work loads.
+ * exception2.c: New test.
+ * exception3.c: New test.
+ * Makefile: Add new tests exception2.c and exception3.c.
+ * GNUmakefile: Likewise.
+
+2000-12-11 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * cleanup3.c: Remove unused variable.
+ * cleanup2.c: Likewise.
+ * exception1.c: Throw an exception rather than use
+ a deliberate zero divide so that catch(...) will
+ handle it under Mingw32. Mingw32 now builds the
+ library correctly to pass all tests - see Thomas
+ Pfaff's detailed instructions re needed changes
+ to Mingw32 in the Pthreads-Win32 FAQ.
+
+2000-09-08 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * cancel5.c: New; tests calling pthread_cancel()
+ from the main thread without first creating a
+ POSIX thread struct for the non-POSIX main thread
+ - this forces pthread_cancel() to create one via
+ pthread_self().
+ * Makefile (cancel5): Add new test.
+ * GNUmakefile (cancel5): Likewise.
+
+2000-08-17 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * create2.c: New; Test that pthread_t contains
+ the W32 HANDLE before it calls the thread routine
+ proper.
+
+2000-08-13 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * condvar3.c: Minor change to eliminate compiler
+ warning.
+
+ * condvar4.c: ditto.
+
+ * condvar5.c: ditto.
+
+ * condvar6.c: ditto.
+
+ * condvar7.c: ditto.
+
+ * condvar8.c: ditto.
+
+ * condvar9.c: ditto.
+
+ * exit1.c: Function needed return statement.
+
+ * cleanup1.c: Remove unnecessary printf arg.
+
+ * cleanup2.c: Fix cast.
+
+ * rwlock6.c: Fix casts.
+
+ * exception1.c (PtW32CatchAll): Had the wrong name;
+ fix casts.
+
+ * cancel3.c: Remove unused waitLock variable.
+
+ * GNUmakefile: Change library/dll naming; add new tests;
+ general minor changes.
+
+ * Makefile: Change library/dll naming; add targets for
+ testing each of the two VC++ EH scheme versions;
+ default target now issues help message; compile warnings
+ now interpreted as errors to stop the make; add new
+ tests; restructure to remove prerequisites needed
+ otherwise.
+
+ * README: Updated.
+
+
+2000-08-10 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * eyal1.c (main): Change implicit cast to explicit
+ cast when passing "print_server" function pointer;
+ G++ no longer allows implicit func parameter casts.
+
+ * cleanup1.c: Remove unused "waitLock".
+ (main): Fix implicit parameter cast.
+
+ * cancel2.c (main): Fix implicit parameter cast.
+
+ * cancel4.c (main): Fix implicit parameter cast.
+
+ * cancel3.c (main): Fix implicit parameter cast.
+
+ * GNUmakefile: Renamed from Makefile; Add missing
+ cancel1 and cancel2 test targets.
+
+ * Makefile: Converted for use with MS nmake.
+
+2000-08-06 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * ccl.bat: Add /nologo to remove extraneous output.
+
+ * exception1.c (exceptionedThread): Init 'dummy';
+ put expression into if condition to prevent optimising away;
+ remove unused variable.
+
+ * cancel4.c (mythread): Cast return value to avoid warnings.
+
+ * cancel2.c (mythread): Missing #endif.
+
+ * condvar9.c (mythread): Cast return value to avoid warnings.
+
+ * condvar8.c (mythread): Cast return value to avoid warnings.
+
+ * condvar7.c (mythread): Cast return value to avoid warnings.
+
+ * cleanup3.c (mythread): Cast return value to avoid warnings.
+
+ * cleanup2.c (mythread): Cast return value to avoid warnings.
+
+ * cleanup1.c (mythread): Cast return value to avoid warnings.
+
+ * condvar5.c (mythread): Cast return value to avoid warnings.
+
+ * condvar3.c (mythread): Cast return value to avoid warnings.
+
+ * condvar6.c (mythread): Cast return value to avoid warnings.
+
+ * condvar4.c (mythread): Cast return value to avoid warnings.
+
+2000-08-05 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * cancel2.c: Use PtW32CatchAll macro if defined.
+
+ * exception1.c: Use PtW32CatchAll macro if defined.
+
+2000-08-02 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * tsd1.c: Fix typecasts of &result [g++ is now very fussy].
+
+ * test.h (assert): Return 0's explicitly to allay
+ g++ errors.
+
+ * join2.c: Add explicit typecasts.
+
+ * join1.c: Add explicit typecasts.
+
+ * join0.c: Add explicit typecasts.
+
+ * eyal1.c: Add explicit typecasts.
+
+ * count1.c (main): Add type cast to remove g++ parse warning
+ [gcc-2.95.2 seems to have tightened up on this].
+
+ * Makefile (GLANG): Use c++ explicitly.
+ Remove MSVC sections (was commented out).
+ Add target to generate cpp output.
+
+2000-07-25 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * runtest.bat: modified to work under W98.
+
+ * runall.bat: Add new tests; modified to work under W98.
+ It was ok under NT.
+
+ * Makefile: Add new tests.
+
+ * exception1.c: New; Test passing exceptions back to the
+ application and retaining library internal exceptions.
+
+ * join0.c: New; Test a single join.
+
+2000-01-06 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * cleanup1.c: New; Test cleanup handler executes (when thread is
+ canceled).
+
+ * cleanup2.c: New; Test cleanup handler executes (when thread is
+ not canceled).
+
+ * cleanup3.c: New; Test cleanup handler does not execute
+ (when thread is not canceled).
+
+2000-01-04 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * cancel4.c: New; Test cancelation does not occur in deferred
+ cancelation threads with no cancelation points.
+
+ * cancel3.c: New; Test asynchronous cancelation.
+
+ * context1.c: New; Test context switching method for async
+ cancelation.
+
+1999-11-23 Ross Johnson <rpj@special.ise.canberra.edu.au>
+
+ * test.h: Add header includes; include local header versions rather
+ than system versions; rearrange the assert macro defines.
+
+1999-11-07 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * loadfree.c: New. Test loading and freeing the library (DLL).
+
+1999-10-30 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * cancel1.c: New. Test pthread_setcancelstate and
+ pthread_setcanceltype functions.
+ * eyal1.c (waste_time): Change calculation to avoid FP exception
+ on Aplhas
+ - Rich Peters <rpeters@micro-magic.com>
+
+Oct 14 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * condvar7.c: New. Test broadcast after waiting thread is canceled.
+ * condvar8.c: New. Test multiple broadcasts.
+ * condvar9.c: New. Test multiple broadcasts with thread
+ cancelation.
+
+Sep 16 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * rwlock6.c: New test.
+
+Sep 15 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * rwlock1.c: New test.
+ * rwlock2.c: New test.
+ * rwlock3.c: New test.
+ * rwlock4.c: New test.
+ * rwlock5.c: New test.
+
+Aug 22 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * runall.bat (join2): Add test.
+
+Aug 19 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * join2.c: New test.
+
+Wed Aug 12 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * Makefile (LIBS): Add -L.
+
+Mon May 31 10:25:01 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * Makefile (GLANG): Add GCC language option.
+
+Sat May 29 23:29:04 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * runall.bat (condvar5): Add new test.
+
+ * runall.bat (condvar6): Add new test.
+
+ * Makefile (condvar5) : Add new test.
+
+ * Makefile (condvar6) : Add new test.
+
+ * condvar5.c: New test for pthread_cond_broadcast().
+
+ * condvar6.c: New test for pthread_cond_broadcast().
+
+Sun Apr 4 12:04:28 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * tsd1.c (mythread): Change Sleep(0) to sched_yield().
+ (sched.h): Include.
+
+ * condvar3.c (mythread): Remove redundant Sleep().
+
+ * runtest.bat: Re-organised to make more informative.
+
+Fri Mar 19 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * *.bat: redirect unwanted output to nul:
+
+ * runall.bat: new.
+
+ * cancel1.c: new. Not part of suite yet.
+
+Mon Mar 15 00:17:55 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * mutex1.c: only test mutex init and destroy; add assertions.
+
+ * count1.c: raise number of spawned threads to 60 (appears to
+ be the limit under Win98).
+
+Sun Mar 14 21:31:02 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * test.h (assert): add assertion trace option.
+ Use:
+ "#define ASSERT_TRACE 1" to turn it on,
+ "#define ASSERT_TRACE 0" to turn it off (default).
+
+ * condvar3.c (main): add more assertions.
+
+ * condvar4.c (main): add more assertions.
+
+ * condvar1.c (main): add more assertions.
+
+Fri Mar 12 08:34:15 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * condvar4.c (cvthing): switch the order of the INITIALIZERs.
+
+ * eyal1.c (main): Fix trylock loop; was not waiting for thread to lock
+ the "started" mutex.
+
+Wed Mar 10 10:41:52 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * tryentercs.c: Apply typo patch from bje.
+
+ * tryentercs2.c: Ditto.
+
+Sun Mar 7 10:41:52 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * Makefile (condvar3, condvar4): Add tests.
+
+ * condvar4.c (General): Reduce to simple test case; prerequisite
+ is condvar3.c; add description.
+
+ * condvar3.c (General): Reduce to simple test case; prerequisite
+ is condvar2.c; add description.
+
+ * condvar2.c (General): Reduce to simple test case; prerequisite
+ is condvar1.c; add description.
+
+ * condvar1.c (General): Reduce to simple test case; add
+ description.
+
+ * Template.c (Comments): Add generic test detail.
+
+1999-02-23 Ross Johnson <rpj@ise.canberra.edu.au>
+
+ * Template.c: Revamp.
+
+ * condvar1.c: Add.
+
+ * condvar2.c: Add.
+
+ * Makefile: Add condvar1 condvar2 tests.
+
+ * exit1.c, exit2.c, exit3.c: Cosmetic changes.
+
+1999-02-23 Ross Johnson <rpj@ise.canberra.edu.au>
+
+ * Makefile: Some refinement.
+
+ * *.c: More exhaustive checking through assertions; clean up;
+ add some more tests.
+
+ * Makefile: Now actually runs the tests.
+
+ * tests.h: Define our own assert macro. The Mingw32
+ version pops up a dialog but we want to run non-interactively.
+
+ * equal1.c: use assert a little more directly so that it
+ prints the actual call statement.
+
+ * exit1.c: Modify to return 0 on success, 1 on failure.
+
+1999-02-22 Ross Johnson <rpj@ise.canberra.edu.au>
+
+ * self2.c: Bring up to date.
+
+ * self3.c: Ditto.
+
+1999-02-21 Ben Elliston <bje@cygnus.com>
+
+ * README: Update.
+
+ * Makefile: New file. Run all tests automatically. Primitive tests
+ are run first; more complex tests are run last.
+
+ * count1.c: New test. Validate the thread count.
+
+ * exit2.c: Perform a simpler test.
+
+ * exit3.c: New test. Replaces exit2.c, since exit2.c needs to
+ perform simpler checking first.
+
+ * create1.c: Update to use the new testsuite exiting convention.
+
+ * equal1.c: Likewise.
+
+ * mutex1.c: Likewise.
+
+ * mutex2.c: Likewise.
+
+ * once1.c: Likewise.
+
+ * self2.c: Likewise.
+
+ * self3.c: Likewise.
+
+ * tsd1.c: Likewise.
+
+1999-02-20 Ross Johnson <rpj@ise.canberra.edu.au>
+
+ * mutex2.c: Test static mutex initialisation.
+
+ * test.h: New. Declares a table mapping error numbers to
+ error names.
+
+1999-01-17 Ross Johnson <rpj@ise.canberra.edu.au>
+
+ * runtest: New script to build and run a test in the tests directory.
+
+Wed Dec 30 11:22:44 1998 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * tsd1.c: Re-written. See comments at start of file.
+ * Template.c: New. Contains skeleton code and comment template
+ intended to fully document the test.
+
+Fri Oct 16 17:59:49 1998 Ross Johnson <rpj@swan.canberra.edu.au>
+
+ * tsd1.c (destroy_key): Add function. Change diagnostics.
+
+Thu Oct 15 17:42:37 1998 Ross Johnson <rpj@swan.canberra.edu.au>
+
+ * tsd1.c (mythread): Fix some casts and add some message
+ output. Fix inverted conditional.
+
+Mon Oct 12 02:12:29 1998 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
+
+ * tsd1.c: New. Test TSD using 1 key and 2 threads.
+
+1998-09-13 Ben Elliston <bje@cygnus.com>
+
+ * eyal1.c: New file; contributed by Eyal Lebedinsky
+ <eyal@eyal.emu.id.au>.
+
+1998-09-12 Ben Elliston <bje@cygnus.com>
+
+ * exit2.c (func): Return a value.
+ (main): Call the right thread entry function.
+
+1998-07-22 Ben Elliston <bje@cygnus.com>
+
+ * exit2.c (main): Fix size of pthread_t array.
+
+1998-07-10 Ben Elliston <bje@cygnus.com>
+
+ * exit2.c: New file; test pthread_exit() harder.
+
+ * exit1.c: New file; test pthread_exit().
diff --git a/tests/GNUmakefile b/tests/GNUmakefile
index b14db76..2eabdae 100644
--- a/tests/GNUmakefile
+++ b/tests/GNUmakefile
@@ -46,7 +46,10 @@ TESTS = loadfree \
rwlock1 rwlock2 rwlock3 rwlock4 rwlock5 rwlock6 rwlock7 \
context1 cancel3 cancel4 cancel5 \
cleanup0 cleanup1 cleanup2 cleanup3 \
- exception1 exception2 exception3
+ priority1 priority2 inherit1 \
+ exception1 exception2 \
+ benchtest1 benchtest2 \
+ exception3
PASSES = $(TESTS:%=%.pass)
@@ -71,6 +74,8 @@ all-GC: $(PASSES)
all-GCE: $(PASSES)
@ $(ECHO) ALL TESTS PASSED! Congratulations!
+benchtest1.pass: mutex3.pass
+benchtest2.pass: benchtest1.pass
cancel1.pass: create1.pass
cancel2.pass: cancel1.pass
cancel2_1.pass: cancel2.pass
@@ -105,6 +110,7 @@ exit1.pass:
exit2.pass: create1.pass
exit3.pass: create1.pass
eyal1.pass: tsd1.pass
+inherit1.pass: join1.pass
join0.pass: create1.pass
join1.pass: create1.pass
join2.pass: create1.pass
@@ -118,6 +124,8 @@ mutex3.pass: create1.pass
mutex4.pass: mutex3.pass
mutex5.pass:
once1.pass: create1.pass
+priority1.pass: join1.pass
+priority2.pass: priority1.pass
rwlock1.pass: condvar6.pass
rwlock2.pass: rwlock1.pass
rwlock3.pass: rwlock2.pass
diff --git a/tests/Makefile b/tests/Makefile
index afcc156..d7b36b0 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -55,7 +55,9 @@ PASSES= loadfree.pass \
context1.pass \
cancel3.pass cancel4.pass cancel5.pass \
cleanup0.pass cleanup1.pass cleanup2.pass cleanup3.pass \
- exception1.pass exception2.pass exception3.pass
+ priority1.pass priority2.pass inherit1.pass \
+ exception1.pass exception2.pass \
+ benchtest1.pass benchtest2.pass exception3.pass \
all:
@ $(ECHO) Run one of the following command lines:
@@ -114,6 +116,8 @@ clean:
- $(RM) *.exe
- $(RM) *.pass
+benchtest1.pass: mutex3.pass
+benchtest2.pass: benchtest1.pass
cancel1.pass: create1.pass
cancel2.pass: cancel1.pass
cancel3.pass: context1.pass
@@ -147,6 +151,7 @@ exit1.pass:
exit2.pass: create1.pass
exit3.pass: create1.pass
eyal1.pass: tsd1.pass
+inherit1.pass: join1.pass
join0.pass: create1.pass
join1.pass: create1.pass
join2.pass: create1.pass
@@ -160,6 +165,8 @@ mutex3.pass: create1.pass
mutex4.pass: mutex3.pass
mutex5.pass:
once1.pass: create1.pass
+priority1.pass: join1.pass
+priority2.pass: priority1.pass
rwlock1.pass: condvar6.pass
rwlock2.pass: rwlock1.pass
rwlock3.pass: rwlock2.pass
diff --git a/tests/benchtest1.c b/tests/benchtest1.c
new file mode 100644
index 0000000..883c24f
--- /dev/null
+++ b/tests/benchtest1.c
@@ -0,0 +1,117 @@
+/*
+ * benchtest1.c
+ *
+ * Measure time taken to complete an elementary operation.
+ *
+ * - Mutex
+ * Single thread iteration over lock/unlock for each mutex type.
+ */
+
+#include "test.h"
+#include <sys/timeb.h>
+
+#ifdef __GNUC__
+#include <stdlib.h>
+#endif
+
+#define ITERATIONS 10000000L
+
+pthread_mutex_t mx;
+pthread_mutexattr_t ma;
+struct _timeb currSysTimeStart;
+struct _timeb currSysTimeStop;
+long durationMilliSecs;
+long overHeadMilliSecs = 0;
+
+#define GetDurationMilliSecs(_TStart, _TStop) ((_TStop.time*1000+_TStop.millitm) \
+ - (_TStart.time*1000+_TStart.millitm))
+
+/*
+ * Dummy use of j, otherwise the loop may be removed by the optimiser
+ * when doing the overhead timing with an empty loop.
+ */
+#define TESTSTART \
+ { int i, j = 0, k = 0; _ftime(&currSysTimeStart); for (i = 0; i < ITERATIONS; i++) { j++;
+
+#define TESTSTOP \
+ }; _ftime(&currSysTimeStop); if (j + k == i) j++; }
+
+
+void
+runTest (char * testNameString, int mType)
+{
+#ifdef PTHREAD_MUTEX_DEFAULT
+ pthread_mutexattr_settype(&ma, mType);
+#endif
+ pthread_mutex_init(&mx, &ma);
+
+ TESTSTART
+ (void) pthread_mutex_lock(&mx);
+ (void) pthread_mutex_unlock(&mx);
+ TESTSTOP
+
+ pthread_mutex_destroy(&mx);
+
+ durationMilliSecs = GetDurationMilliSecs(currSysTimeStart, currSysTimeStop)
+ - overHeadMilliSecs;
+
+ printf( "%-25s %15ld %15ld %15.3f\n",
+ testNameString,
+ ITERATIONS,
+ durationMilliSecs,
+ (float) durationMilliSecs * 1E3 / ITERATIONS);
+}
+
+
+int
+main (int argc, char *argv[])
+{
+ pthread_mutexattr_init(&ma);
+
+ printf( "Single thread, non-blocking mutex locks/unlocks.\n\n");
+ printf( "%-25s %15s %15s %15s\n",
+ "Test",
+ "Iterations",
+ "Total(msec)",
+ "lock/unlock(usec)");
+
+ /*
+ * Time the loop overhead so we can subtract it from the actual test times.
+ */
+
+ TESTSTART
+ TESTSTOP
+
+ durationMilliSecs = GetDurationMilliSecs(currSysTimeStart, currSysTimeStop)
+ - overHeadMilliSecs;
+
+ printf( "%-25s %15ld %15ld\n",
+ "Overhead",
+ ITERATIONS,
+ durationMilliSecs);
+
+ overHeadMilliSecs = durationMilliSecs;
+
+ /*
+ * Now we can start the actual tests
+ */
+#ifdef PTHREAD_MUTEX_DEFAULT
+ runTest("PTHREAD_MUTEX_DEFAULT", PTHREAD_MUTEX_DEFAULT);
+
+ runTest("PTHREAD_MUTEX_NORMAL", PTHREAD_MUTEX_NORMAL);
+
+ runTest("PTHREAD_MUTEX_ERRORCHECK", PTHREAD_MUTEX_ERRORCHECK);
+
+ runTest("PTHREAD_MUTEX_RECURSIVE", PTHREAD_MUTEX_RECURSIVE);
+#else
+ runTest("Non-blocking lock", 0);
+#endif
+
+ /*
+ * End of tests.
+ */
+
+ pthread_mutexattr_destroy(&ma);
+
+ return 0;
+}
diff --git a/tests/benchtest2.c b/tests/benchtest2.c
new file mode 100644
index 0000000..f2932b9
--- /dev/null
+++ b/tests/benchtest2.c
@@ -0,0 +1,183 @@
+/*
+ * benchtest1.c
+ *
+ * Measure time taken to complete an elementary operation.
+ *
+ * - Mutex
+ * Two threads iterate over lock/unlock for each mutex type.
+ * The two threads are forced into lock-step using two mutexes,
+ * forcing the threads to block on each lock operation. The
+ * time measured is therefore the worst case senario.
+ */
+
+#include "test.h"
+#include <sys/timeb.h>
+
+#ifdef __GNUC__
+#include <stdlib.h>
+#endif
+
+#define ITERATIONS 100000L
+
+pthread_mutex_t gate1, gate2;
+pthread_mutexattr_t ma;
+long durationMilliSecs;
+long overHeadMilliSecs = 0;
+struct _timeb currSysTimeStart;
+struct _timeb currSysTimeStop;
+pthread_t worker;
+int running = 0;
+
+#define GetDurationMilliSecs(_TStart, _TStop) ((_TStop.time*1000+_TStop.millitm) \
+ - (_TStart.time*1000+_TStart.millitm))
+
+/*
+ * Dummy use of j, otherwise the loop may be removed by the optimiser
+ * when doing the overhead timing with an empty loop.
+ */
+#define TESTSTART \
+ { int i, j = 0, k = 0; _ftime(&currSysTimeStart); for (i = 0; i < ITERATIONS; i++) { j++;
+
+#define TESTSTOP \
+ }; _ftime(&currSysTimeStop); if (j + k == i) j++; }
+
+
+void *
+overheadThread(void * arg)
+{
+ do
+ {
+ sched_yield();
+ }
+ while (running);
+
+ return NULL;
+}
+
+
+void *
+workerThread(void * arg)
+{
+ do
+ {
+ (void) pthread_mutex_lock(&gate1);
+ (void) pthread_mutex_lock(&gate2);
+ (void) pthread_mutex_unlock(&gate1);
+ sched_yield();
+ (void) pthread_mutex_unlock(&gate2);
+ }
+ while (running);
+
+ return NULL;
+}
+
+void
+runTest (char * testNameString, int mType)
+{
+#ifdef PTHREAD_MUTEX_DEFAULT
+ pthread_mutexattr_settype(&ma, mType);
+#endif
+ pthread_mutex_init(&gate1, &ma);
+ pthread_mutex_init(&gate2, &ma);
+
+ (void) pthread_mutex_lock(&gate1);
+ (void) pthread_mutex_lock(&gate2);
+
+ running = 1;
+
+ (void) pthread_create(&worker, NULL, workerThread, NULL);
+
+ TESTSTART
+ (void) pthread_mutex_unlock(&gate1);
+ sched_yield();
+ (void) pthread_mutex_unlock(&gate2);
+ (void) pthread_mutex_lock(&gate1);
+ (void) pthread_mutex_lock(&gate2);
+ TESTSTOP
+
+ running = 0;
+
+ (void) pthread_mutex_unlock(&gate2);
+ (void) pthread_mutex_unlock(&gate1);
+
+ (void) pthread_join(worker, NULL);
+
+ pthread_mutex_destroy(&gate2);
+ pthread_mutex_destroy(&gate1);
+
+ durationMilliSecs = GetDurationMilliSecs(currSysTimeStart, currSysTimeStop)
+ - overHeadMilliSecs;
+
+ printf( "%-25s %15ld %15ld %15.3f\n",
+ testNameString,
+ ITERATIONS,
+ durationMilliSecs,
+ (float) durationMilliSecs * 1E3 / ITERATIONS / 4 /* Four locks/unlocks per iteration */);
+}
+
+
+int
+main (int argc, char *argv[])
+{
+ pthread_mutexattr_init(&ma);
+
+ printf( "Two threads, blocking mutex locks/unlocks.\n\n");
+
+ printf( "%-25s %15s %15s %15s\n",
+ "Test",
+ "Iterations",
+ "Total(msec)",
+ "lock/unlock(usec)");
+
+ /*
+ * Time the loop overhead so we can subtract it from the actual test times.
+ */
+
+ running = 1;
+
+ (void) pthread_create(&worker, NULL, overheadThread, NULL);
+
+ TESTSTART
+ sched_yield();
+ TESTSTOP
+
+ running = 0;
+
+ (void) pthread_join(worker, NULL);
+
+ pthread_mutex_destroy(&gate2);
+ pthread_mutex_destroy(&gate1);
+
+ durationMilliSecs = GetDurationMilliSecs(currSysTimeStart, currSysTimeStop)
+ - overHeadMilliSecs;
+
+ printf( "%-25s %15ld %15ld\n",
+ "Overhead",
+ ITERATIONS,
+ durationMilliSecs);
+
+ overHeadMilliSecs = durationMilliSecs;
+
+ /*
+ * Now we can start the actual tests
+ */
+#ifdef PTHREAD_MUTEX_DEFAULT
+ runTest("PTHREAD_MUTEX_DEFAULT", PTHREAD_MUTEX_DEFAULT);
+
+ runTest("PTHREAD_MUTEX_NORMAL", PTHREAD_MUTEX_NORMAL);
+
+ runTest("PTHREAD_MUTEX_ERRORCHECK", PTHREAD_MUTEX_ERRORCHECK);
+
+ runTest("PTHREAD_MUTEX_RECURSIVE", PTHREAD_MUTEX_RECURSIVE);
+#else
+ runTest("Blocking locks", 0);
+#endif
+
+ /*
+ * End of tests.
+ */
+
+ pthread_mutexattr_destroy(&ma);
+
+ return 0;
+}
diff --git a/tests/cancel5.c b/tests/cancel5.c
index 7d7262a..b12cc1c 100644
--- a/tests/cancel5.c
+++ b/tests/cancel5.c
@@ -1,177 +1,177 @@
-/*
- * File: cancel5.c
- *
- * Test Synopsis: Test calling pthread_cancel from the main thread
- * without calling pthread_self() in main.
- *
- * Test Method (Validation or Falsification):
- * -
- *
- * Requirements Tested:
- * -
- *
- * Features Tested:
- * -
- *
- * Cases Tested:
- * -
- *
- * Description:
- * -
- *
- * Environment:
- * -
- *
- * Input:
- * - None.
- *
- * Output:
- * - File name, Line number, and failed expression on failure.
- * - No output on success.
- *
- * Assumptions:
- * - have working pthread_create, pthread_self, pthread_mutex_lock/unlock
- * pthread_testcancel, pthread_cancel, pthread_join
- *
- * Pass Criteria:
- * - Process returns zero exit status.
- *
- * Fail Criteria:
- * - Process returns non-zero exit status.
- */
-
-#if defined(_MSC_VER) || defined(__cplusplus)
-
-#include "test.h"
-
-/*
- * Create NUMTHREADS threads in addition to the Main thread.
- */
-enum {
- NUMTHREADS = 4
-};
-
-typedef struct bag_t_ bag_t;
-struct bag_t_ {
- int threadnum;
- int started;
- /* Add more per-thread state variables here */
- int count;
-};
-
-static bag_t threadbag[NUMTHREADS + 1];
-
-void *
-mythread(void * arg)
-{
- int result = ((int)PTHREAD_CANCELED + 1);
- bag_t * bag = (bag_t *) arg;
-
- assert(bag == &threadbag[bag->threadnum]);
- assert(bag->started == 0);
- bag->started = 1;
-
- /* Set to known state and type */
-
- assert(pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL) == 0);
-
- assert(pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL) == 0);
-
- /*
- * We wait up to 10 seconds, waking every 0.1 seconds,
- * for a cancelation to be applied to us.
- */
- for (bag->count = 0; bag->count < 100; bag->count++)
- Sleep(100);
-
- return (void *) result;
-}
-
-int
-main()
-{
- int failed = 0;
- int i;
- pthread_t t[NUMTHREADS + 1];
-
- for (i = 1; i <= NUMTHREADS; i++)
- {
- threadbag[i].started = 0;
- threadbag[i].threadnum = i;
- assert(pthread_create(&t[i], NULL, mythread, (void *) &threadbag[i]) == 0);
- }
-
- /*
- * Code to control or munipulate child threads should probably go here.
- */
- Sleep(500);
-
- for (i = 1; i <= NUMTHREADS; i++)
- {
- assert(pthread_cancel(t[i]) == 0);
- }
-
- /*
- * Give threads time to run.
- */
- Sleep(NUMTHREADS * 100);
-
- /*
- * Standard check that all threads started.
- */
- for (i = 1; i <= NUMTHREADS; i++)
- {
- if (!threadbag[i].started)
- {
- failed |= !threadbag[i].started;
- fprintf(stderr, "Thread %d: started %d\n", i, threadbag[i].started);
- }
- }
-
- assert(!failed);
-
- /*
- * Check any results here. Set "failed" and only print output on failure.
- */
- failed = 0;
- for (i = 1; i <= NUMTHREADS; i++)
- {
- int fail = 0;
- int result = 0;
-
- /*
- * The thread does not contain any cancelation points, so
- * a return value of PTHREAD_CANCELED confirms that async
- * cancelation succeeded.
- */
- assert(pthread_join(t[i], (void **) &result) == 0);
-
- fail = (result != (int) PTHREAD_CANCELED);
-
- if (fail)
- {
- fprintf(stderr, "Thread %d: started %d: count %d\n",
- i,
- threadbag[i].started,
- threadbag[i].count);
- }
- failed = (failed || fail);
- }
-
- assert(!failed);
-
- /*
- * Success.
- */
- return 0;
-}
-
-#else /* defined(_MSC_VER) || defined(__cplusplus) */
-
-int
-main()
-{
- return 0;
-}
-
-#endif /* defined(_MSC_VER) || defined(__cplusplus) */
+/*
+ * File: cancel5.c
+ *
+ * Test Synopsis: Test calling pthread_cancel from the main thread
+ * without calling pthread_self() in main.
+ *
+ * Test Method (Validation or Falsification):
+ * -
+ *
+ * Requirements Tested:
+ * -
+ *
+ * Features Tested:
+ * -
+ *
+ * Cases Tested:
+ * -
+ *
+ * Description:
+ * -
+ *
+ * Environment:
+ * -
+ *
+ * Input:
+ * - None.
+ *
+ * Output:
+ * - File name, Line number, and failed expression on failure.
+ * - No output on success.
+ *
+ * Assumptions:
+ * - have working pthread_create, pthread_self, pthread_mutex_lock/unlock
+ * pthread_testcancel, pthread_cancel, pthread_join
+ *
+ * Pass Criteria:
+ * - Process returns zero exit status.
+ *
+ * Fail Criteria:
+ * - Process returns non-zero exit status.
+ */
+
+#if defined(_MSC_VER) || defined(__cplusplus)
+
+#include "test.h"
+
+/*
+ * Create NUMTHREADS threads in addition to the Main thread.
+ */
+enum {
+ NUMTHREADS = 4
+};
+
+typedef struct bag_t_ bag_t;
+struct bag_t_ {
+ int threadnum;
+ int started;
+ /* Add more per-thread state variables here */
+ int count;
+};
+
+static bag_t threadbag[NUMTHREADS + 1];
+
+void *
+mythread(void * arg)
+{
+ int result = ((int)PTHREAD_CANCELED + 1);
+ bag_t * bag = (bag_t *) arg;
+
+ assert(bag == &threadbag[bag->threadnum]);
+ assert(bag->started == 0);
+ bag->started = 1;
+
+ /* Set to known state and type */
+
+ assert(pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL) == 0);
+
+ assert(pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL) == 0);
+
+ /*
+ * We wait up to 10 seconds, waking every 0.1 seconds,
+ * for a cancelation to be applied to us.
+ */
+ for (bag->count = 0; bag->count < 100; bag->count++)
+ Sleep(100);
+
+ return (void *) result;
+}
+
+int
+main()
+{
+ int failed = 0;
+ int i;
+ pthread_t t[NUMTHREADS + 1];
+
+ for (i = 1; i <= NUMTHREADS; i++)
+ {
+ threadbag[i].started = 0;
+ threadbag[i].threadnum = i;
+ assert(pthread_create(&t[i], NULL, mythread, (void *) &threadbag[i]) == 0);
+ }
+
+ /*
+ * Code to control or munipulate child threads should probably go here.
+ */
+ Sleep(500);
+
+ for (i = 1; i <= NUMTHREADS; i++)
+ {
+ assert(pthread_cancel(t[i]) == 0);
+ }
+
+ /*
+ * Give threads time to run.
+ */
+ Sleep(NUMTHREADS * 100);
+
+ /*
+ * Standard check that all threads started.
+ */
+ for (i = 1; i <= NUMTHREADS; i++)
+ {
+ if (!threadbag[i].started)
+ {
+ failed |= !threadbag[i].started;
+ fprintf(stderr, "Thread %d: started %d\n", i, threadbag[i].started);
+ }
+ }
+
+ assert(!failed);
+
+ /*
+ * Check any results here. Set "failed" and only print output on failure.
+ */
+ failed = 0;
+ for (i = 1; i <= NUMTHREADS; i++)
+ {
+ int fail = 0;
+ int result = 0;
+
+ /*
+ * The thread does not contain any cancelation points, so
+ * a return value of PTHREAD_CANCELED confirms that async
+ * cancelation succeeded.
+ */
+ assert(pthread_join(t[i], (void **) &result) == 0);
+
+ fail = (result != (int) PTHREAD_CANCELED);
+
+ if (fail)
+ {
+ fprintf(stderr, "Thread %d: started %d: count %d\n",
+ i,
+ threadbag[i].started,
+ threadbag[i].count);
+ }
+ failed = (failed || fail);
+ }
+
+ assert(!failed);
+
+ /*
+ * Success.
+ */
+ return 0;
+}
+
+#else /* defined(_MSC_VER) || defined(__cplusplus) */
+
+int
+main()
+{
+ return 0;
+}
+
+#endif /* defined(_MSC_VER) || defined(__cplusplus) */
diff --git a/tests/exception1.c b/tests/exception1.c
index 60038cd..e6ca461 100644
--- a/tests/exception1.c
+++ b/tests/exception1.c
@@ -1,231 +1,231 @@
-/*
- * File: exception1.c
- *
- * Test Synopsis: Test passing of exceptions back to the application.
- *
- * Test Method (Validation or Falsification):
- * -
- *
- * Requirements Tested:
- * -
- *
- * Features Tested:
- * -
- *
- * Cases Tested:
- * -
- *
- * Description:
- * -
- *
- * Environment:
- * -
- *
- * Input:
- * - None.
- *
- * Output:
- * - File name, Line number, and failed expression on failure.
- * - No output on success.
- *
- * Assumptions:
- * - have working pthread_create, pthread_self, pthread_mutex_lock/unlock
- * pthread_testcancel, pthread_cancel, pthread_join
- *
- * Pass Criteria:
- * - Process returns zero exit status.
- *
- * Fail Criteria:
- * - Process returns non-zero exit status.
- */
-
-#if defined(_MSC_VER) || defined(__cplusplus)
-
-#include "test.h"
-
-/*
- * Create NUMTHREADS threads in addition to the Main thread.
- */
-enum {
- NUMTHREADS = 4
-};
-
-void *
-exceptionedThread(void * arg)
-{
- int dummy = 0;
- int result = ((int)PTHREAD_CANCELED + 1);
- /* Set to async cancelable */
-
- assert(pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL) == 0);
-
- assert(pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL) == 0);
-
- Sleep(100);
-
-#if defined(_MSC_VER) && !defined(__cplusplus)
- __try
- {
- int zero = 0;
- int one = 1;
- /*
- * The deliberate exception condition (zero devide) is
- * in an "if" to avoid being optimised out.
- */
- if (dummy == one/zero)
- Sleep(0);
- }
- __except (EXCEPTION_EXECUTE_HANDLER)
- {
- /* Should get into here. */
- result = ((int)PTHREAD_CANCELED + 2);
- }
-#elif defined(__cplusplus)
- try
- {
- /*
- * I had a zero divide exception here but it
- * wasn't being caught by the catch(...)
- * below under Mingw32. That could be a problem.
- */
- throw dummy;
- }
-#if defined(PtW32CatchAll)
- PtW32CatchAll
-#else
- catch (...)
-#endif
- {
- /* Should get into here. */
- result = ((int)PTHREAD_CANCELED + 2);
- }
-#endif
-
- return (void *) result;
-}
-
-void *
-canceledThread(void * arg)
-{
- int result = ((int)PTHREAD_CANCELED + 1);
- int count;
-
- /* Set to async cancelable */
-
- assert(pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL) == 0);
-
- assert(pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL) == 0);
-
-#if defined(_MSC_VER) && !defined(__cplusplus)
- __try
- {
- /*
- * We wait up to 10 seconds, waking every 0.1 seconds,
- * for a cancelation to be applied to us.
- */
- for (count = 0; count < 100; count++)
- Sleep(100);
- }
- __except (EXCEPTION_EXECUTE_HANDLER)
- {
- /* Should NOT get into here. */
- result = ((int)PTHREAD_CANCELED + 2);
- }
-#elif defined(__cplusplus)
- try
- {
- /*
- * We wait up to 10 seconds, waking every 0.1 seconds,
- * for a cancelation to be applied to us.
- */
- for (count = 0; count < 100; count++)
- Sleep(100);
- }
-#if defined(PtW32CatchAll)
- PtW32CatchAll
-#else
- catch (...)
-#endif
- {
- /* Should NOT get into here. */
- result = ((int)PTHREAD_CANCELED + 2);
- }
-#endif
-
- return (void *) result;
-}
-
-int
-main()
-{
- int failed = 0;
- int i;
- pthread_t mt;
- pthread_t et[NUMTHREADS];
- pthread_t ct[NUMTHREADS];
-
- assert((mt = pthread_self()) != NULL);
-
- for (i = 0; i < NUMTHREADS; i++)
- {
- assert(pthread_create(&et[i], NULL, exceptionedThread, NULL) == 0);
- assert(pthread_create(&ct[i], NULL, canceledThread, NULL) == 0);
- }
-
- /*
- * Code to control or munipulate child threads should probably go here.
- */
- Sleep(1000);
-
- for (i = 0; i < NUMTHREADS; i++)
- {
- assert(pthread_cancel(ct[i]) == 0);
- }
-
- /*
- * Give threads time to run.
- */
- Sleep(NUMTHREADS * 1000);
-
- /*
- * Check any results here. Set "failed" and only print output on failure.
- */
- failed = 0;
- for (i = 0; i < NUMTHREADS; i++)
- {
- int fail = 0;
- int result = 0;
-
- /* Canceled thread */
- assert(pthread_join(ct[i], (void **) &result) == 0);
- assert(!(fail = (result != (int) PTHREAD_CANCELED)));
-
- failed = (failed || fail);
-
- /* Exceptioned thread */
- assert(pthread_join(et[i], (void **) &result) == 0);
- assert(!(fail = (result != ((int) PTHREAD_CANCELED + 2))));
-
- failed = (failed || fail);
- }
-
- assert(!failed);
-
- /*
- * Success.
- */
- return 0;
-}
-
-#else /* defined(_MSC_VER) || defined(__cplusplus) */
-
-#include <stdio.h>
-
-int
-main()
-{
- fprintf(stderr, "Test N/A for this compiler environment.\n");
- return 0;
-}
-
-#endif /* defined(_MSC_VER) || defined(__cplusplus) */
+/*
+ * File: exception1.c
+ *
+ * Test Synopsis: Test passing of exceptions back to the application.
+ *
+ * Test Method (Validation or Falsification):
+ * -
+ *
+ * Requirements Tested:
+ * -
+ *
+ * Features Tested:
+ * -
+ *
+ * Cases Tested:
+ * -
+ *
+ * Description:
+ * -
+ *
+ * Environment:
+ * -
+ *
+ * Input:
+ * - None.
+ *
+ * Output:
+ * - File name, Line number, and failed expression on failure.
+ * - No output on success.
+ *
+ * Assumptions:
+ * - have working pthread_create, pthread_self, pthread_mutex_lock/unlock
+ * pthread_testcancel, pthread_cancel, pthread_join
+ *
+ * Pass Criteria:
+ * - Process returns zero exit status.
+ *
+ * Fail Criteria:
+ * - Process returns non-zero exit status.
+ */
+
+#if defined(_MSC_VER) || defined(__cplusplus)
+
+#include "test.h"
+
+/*
+ * Create NUMTHREADS threads in addition to the Main thread.
+ */
+enum {
+ NUMTHREADS = 4
+};
+
+void *
+exceptionedThread(void * arg)
+{
+ int dummy = 0;
+ int result = ((int)PTHREAD_CANCELED + 1);
+ /* Set to async cancelable */
+
+ assert(pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL) == 0);
+
+ assert(pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL) == 0);
+
+ Sleep(100);
+
+#if defined(_MSC_VER) && !defined(__cplusplus)
+ __try
+ {
+ int zero = 0;
+ int one = 1;
+ /*
+ * The deliberate exception condition (zero devide) is
+ * in an "if" to avoid being optimised out.
+ */
+ if (dummy == one/zero)
+ Sleep(0);
+ }
+ __except (EXCEPTION_EXECUTE_HANDLER)
+ {
+ /* Should get into here. */
+ result = ((int)PTHREAD_CANCELED + 2);
+ }
+#elif defined(__cplusplus)
+ try
+ {
+ /*
+ * I had a zero divide exception here but it
+ * wasn't being caught by the catch(...)
+ * below under Mingw32. That could be a problem.
+ */
+ throw dummy;
+ }
+#if defined(PtW32CatchAll)
+ PtW32CatchAll
+#else
+ catch (...)
+#endif
+ {
+ /* Should get into here. */
+ result = ((int)PTHREAD_CANCELED + 2);
+ }
+#endif
+
+ return (void *) result;
+}
+
+void *
+canceledThread(void * arg)
+{
+ int result = ((int)PTHREAD_CANCELED + 1);
+ int count;
+
+ /* Set to async cancelable */
+
+ assert(pthread_setcancelstate(PTHREAD_CANCEL_ENABLE, NULL) == 0);
+
+ assert(pthread_setcanceltype(PTHREAD_CANCEL_ASYNCHRONOUS, NULL) == 0);
+
+#if defined(_MSC_VER) && !defined(__cplusplus)
+ __try
+ {
+ /*
+ * We wait up to 10 seconds, waking every 0.1 seconds,
+ * for a cancelation to be applied to us.
+ */
+ for (count = 0; count < 100; count++)
+ Sleep(100);
+ }
+ __except (EXCEPTION_EXECUTE_HANDLER)
+ {
+ /* Should NOT get into here. */
+ result = ((int)PTHREAD_CANCELED + 2);
+ }
+#elif defined(__cplusplus)
+ try
+ {
+ /*
+ * We wait up to 10 seconds, waking every 0.1 seconds,
+ * for a cancelation to be applied to us.
+ */
+ for (count = 0; count < 100; count++)
+ Sleep(100);
+ }
+#if defined(PtW32CatchAll)
+ PtW32CatchAll
+#else
+ catch (...)
+#endif
+ {
+ /* Should NOT get into here. */
+ result = ((int)PTHREAD_CANCELED + 2);
+ }
+#endif
+
+ return (void *) result;
+}
+
+int
+main()
+{
+ int failed = 0;
+ int i;
+ pthread_t mt;
+ pthread_t et[NUMTHREADS];
+ pthread_t ct[NUMTHREADS];
+
+ assert((mt = pthread_self()) != NULL);
+
+ for (i = 0; i < NUMTHREADS; i++)
+ {
+ assert(pthread_create(&et[i], NULL, exceptionedThread, NULL) == 0);
+ assert(pthread_create(&ct[i], NULL, canceledThread, NULL) == 0);
+ }
+
+ /*
+ * Code to control or munipulate child threads should probably go here.
+ */
+ Sleep(1000);
+
+ for (i = 0; i < NUMTHREADS; i++)
+ {
+ assert(pthread_cancel(ct[i]) == 0);
+ }
+
+ /*
+ * Give threads time to run.
+ */
+ Sleep(NUMTHREADS * 1000);
+
+ /*
+ * Check any results here. Set "failed" and only print output on failure.
+ */
+ failed = 0;
+ for (i = 0; i < NUMTHREADS; i++)
+ {
+ int fail = 0;
+ int result = 0;
+
+ /* Canceled thread */
+ assert(pthread_join(ct[i], (void **) &result) == 0);
+ assert(!(fail = (result != (int) PTHREAD_CANCELED)));
+
+ failed = (failed || fail);
+
+ /* Exceptioned thread */
+ assert(pthread_join(et[i], (void **) &result) == 0);
+ assert(!(fail = (result != ((int) PTHREAD_CANCELED + 2))));
+
+ failed = (failed || fail);
+ }
+
+ assert(!failed);
+
+ /*
+ * Success.
+ */
+ return 0;
+}
+
+#else /* defined(_MSC_VER) || defined(__cplusplus) */
+
+#include <stdio.h>
+
+int
+main()
+{
+ fprintf(stderr, "Test N/A for this compiler environment.\n");
+ return 0;
+}
+
+#endif /* defined(_MSC_VER) || defined(__cplusplus) */
diff --git a/tests/inherit1.c b/tests/inherit1.c
new file mode 100644
index 0000000..a909eb7
--- /dev/null
+++ b/tests/inherit1.c
@@ -0,0 +1,99 @@
+/*
+ * File: inherit1.c
+ *
+ * Test Synopsis:
+ * - Test thread priority inheritance.
+ *
+ * Test Method (Validation or Falsification):
+ * -
+ *
+ * Requirements Tested:
+ * -
+ *
+ * Features Tested:
+ * -
+ *
+ * Cases Tested:
+ * -
+ *
+ * Description:
+ * -
+ *
+ * Environment:
+ * -
+ *
+ * Input:
+ * - None.
+ *
+ * Output:
+ * - File name, Line number, and failed expression on failure.
+ * - No output on success.
+ *
+ * Assumptions:
+ * -
+ *
+ * Pass Criteria:
+ * - Process returns zero exit status.
+ *
+ * Fail Criteria:
+ * - Process returns non-zero exit status.
+ */
+
+#include "test.h"
+
+void * func(void * arg)
+{
+ int policy;
+ struct sched_param param;
+
+ assert(pthread_getschedparam(pthread_self(), &policy, &param) == 0);
+ return (void *) param.sched_priority;
+}
+
+int
+main()
+{
+ pthread_t t;
+ pthread_t mainThread = pthread_self();
+ pthread_attr_t attr;
+ void * result = NULL;
+ struct sched_param param;
+ struct sched_param mainParam;
+ int maxPrio;
+ int minPrio;
+ int prio;
+ int policy;
+ int inheritsched = -1;
+
+ assert((maxPrio = sched_get_priority_max(SCHED_OTHER)) != -1);
+ assert((minPrio = sched_get_priority_min(SCHED_OTHER)) != -1);
+
+ assert(pthread_attr_init(&attr) == 0);
+ assert(pthread_attr_setinheritsched(&attr, PTHREAD_INHERIT_SCHED) == 0);
+ assert(pthread_attr_getinheritsched(&attr, &inheritsched) == 0);
+ assert(inheritsched == PTHREAD_INHERIT_SCHED);
+
+ for (prio = minPrio; prio < maxPrio; prio++)
+ {
+ mainParam.sched_priority = prio;
+
+ /* Change the main thread priority */
+ assert(pthread_setschedparam(mainThread, SCHED_OTHER, &mainParam) == 0);
+ assert(pthread_getschedparam(mainThread, &policy, &mainParam) == 0);
+ assert(policy == SCHED_OTHER);
+ assert(mainParam.sched_priority == prio);
+
+ for (param.sched_priority = prio;
+ param.sched_priority <= maxPrio;
+ param.sched_priority++)
+ {
+ /* The new thread create should ignore this new priority */
+ assert(pthread_attr_setschedparam(&attr, &param) == 0);
+ assert(pthread_create(&t, &attr, func, NULL) == 0);
+ pthread_join(t, &result);
+ assert((int) result == mainParam.sched_priority);
+ }
+ }
+
+ return 0;
+}
diff --git a/tests/mutex3.c b/tests/mutex3.c
index 26cb070..07e75b1 100644
--- a/tests/mutex3.c
+++ b/tests/mutex3.c
@@ -33,8 +33,7 @@ main()
assert(pthread_mutex_lock(&mutex1) == 0);
assert(pthread_create(&t, NULL, func, NULL) == 0);
-
- Sleep(2000);
+ assert(pthread_join(t, NULL) == 0);
assert(pthread_mutex_unlock(&mutex1) == 0);
diff --git a/tests/mutex4.c b/tests/mutex4.c
index 7b989d0..1bf236b 100644
--- a/tests/mutex4.c
+++ b/tests/mutex4.c
@@ -13,42 +13,61 @@
static int wasHere = 0;
-static pthread_mutex_t mutex1 = PTHREAD_MUTEX_INITIALIZER;
-
-void * locker(void * arg)
-{
- wasHere++;
- assert(pthread_mutex_lock(&mutex1) == 0);
- Sleep(1000);
- assert(pthread_mutex_unlock(&mutex1) == 0);
-
- wasHere++;
- return 0;
-}
+static pthread_mutex_t mutex1;
void * unlocker(void * arg)
{
- wasHere++;
-
- /* Wait for locker to lock mutex1 */
- Sleep(500);
-
- assert(pthread_mutex_unlock(&mutex1) == EPERM);
+ int expectedResult = (int) arg;
wasHere++;
- return 0;
+ assert(pthread_mutex_unlock(&mutex1) == expectedResult);
+ wasHere++;
+ return NULL;
}
int
main()
{
pthread_t t;
+ pthread_mutexattr_t ma;
- assert(pthread_create(&t, NULL, locker, NULL) == 0);
- assert(pthread_create(&t, NULL, unlocker, NULL) == 0);
- Sleep(2000);
+ assert(pthread_mutexattr_init(&ma) == 0);
- assert(wasHere == 4);
+ wasHere = 0;
+ assert(pthread_mutexattr_settype(&ma, PTHREAD_MUTEX_DEFAULT) == 0);
+ assert(pthread_mutex_init(&mutex1, &ma) == 0);
+ assert(pthread_mutex_lock(&mutex1) == 0);
+ assert(pthread_create(&t, NULL, unlocker, (void *) 0) == 0);
+ assert(pthread_join(t, NULL) == 0);
+ assert(pthread_mutex_unlock(&mutex1) == EPERM);
+ assert(wasHere == 2);
+
+ wasHere = 0;
+ assert(pthread_mutexattr_settype(&ma, PTHREAD_MUTEX_NORMAL) == 0);
+ assert(pthread_mutex_init(&mutex1, &ma) == 0);
+ assert(pthread_mutex_lock(&mutex1) == 0);
+ assert(pthread_create(&t, NULL, unlocker, (void *) 0) == 0);
+ assert(pthread_join(t, NULL) == 0);
+ assert(pthread_mutex_unlock(&mutex1) == EPERM);
+ assert(wasHere == 2);
+
+ wasHere = 0;
+ assert(pthread_mutexattr_settype(&ma, PTHREAD_MUTEX_ERRORCHECK) == 0);
+ assert(pthread_mutex_init(&mutex1, &ma) == 0);
+ assert(pthread_mutex_lock(&mutex1) == 0);
+ assert(pthread_create(&t, NULL, unlocker, (void *) EPERM) == 0);
+ assert(pthread_join(t, NULL) == 0);
+ assert(pthread_mutex_unlock(&mutex1) == 0);
+ assert(wasHere == 2);
+
+ wasHere = 0;
+ assert(pthread_mutexattr_settype(&ma, PTHREAD_MUTEX_RECURSIVE) == 0);
+ assert(pthread_mutex_init(&mutex1, &ma) == 0);
+ assert(pthread_mutex_lock(&mutex1) == 0);
+ assert(pthread_create(&t, NULL, unlocker, (void *) EPERM) == 0);
+ assert(pthread_join(t, NULL) == 0);
+ assert(pthread_mutex_unlock(&mutex1) == 0);
+ assert(wasHere == 2);
return 0;
}
diff --git a/tests/mutex5.c b/tests/mutex5.c
index d7b9064..1f90e19 100644
--- a/tests/mutex5.c
+++ b/tests/mutex5.c
@@ -13,18 +13,18 @@ int
main()
{
int mxType = -1;
- int bool = 0; /* Use to quell GNU compiler warnings. */
+ int success = 0; /* Use to quell GNU compiler warnings. */
- assert(bool = PTHREAD_MUTEX_DEFAULT == PTHREAD_MUTEX_NORMAL);
- assert(bool = PTHREAD_MUTEX_DEFAULT != PTHREAD_MUTEX_ERRORCHECK);
- assert(bool = PTHREAD_MUTEX_DEFAULT != PTHREAD_MUTEX_RECURSIVE);
- assert(bool = PTHREAD_MUTEX_RECURSIVE != PTHREAD_MUTEX_ERRORCHECK);
+ assert(success = PTHREAD_MUTEX_DEFAULT == PTHREAD_MUTEX_NORMAL);
+ assert(success = PTHREAD_MUTEX_DEFAULT != PTHREAD_MUTEX_ERRORCHECK);
+ assert(success = PTHREAD_MUTEX_DEFAULT != PTHREAD_MUTEX_RECURSIVE);
+ assert(success = PTHREAD_MUTEX_RECURSIVE != PTHREAD_MUTEX_ERRORCHECK);
- assert(bool = PTHREAD_MUTEX_NORMAL == PTHREAD_MUTEX_FAST_NP);
- assert(bool = PTHREAD_MUTEX_RECURSIVE == PTHREAD_MUTEX_RECURSIVE_NP);
- assert(bool = PTHREAD_MUTEX_ERRORCHECK == PTHREAD_MUTEX_ERRORCHECK_NP);
+ assert(success = PTHREAD_MUTEX_NORMAL == PTHREAD_MUTEX_FAST_NP);
+ assert(success = PTHREAD_MUTEX_RECURSIVE == PTHREAD_MUTEX_RECURSIVE_NP);
+ assert(success = PTHREAD_MUTEX_ERRORCHECK == PTHREAD_MUTEX_ERRORCHECK_NP);
- if (bool == bool)
+ if (success == success)
{
assert(pthread_mutexattr_init(&mxAttr) == 0);
assert(pthread_mutexattr_gettype(&mxAttr, &mxType) == 0);
diff --git a/tests/priority1.c b/tests/priority1.c
new file mode 100644
index 0000000..a311028
--- /dev/null
+++ b/tests/priority1.c
@@ -0,0 +1,78 @@
+/*
+ * File: priority1.c
+ *
+ * Test Synopsis:
+ * - Test thread priority explicit setting using thread attribute.
+ *
+ * Test Method (Validation or Falsification):
+ * -
+ *
+ * Requirements Tested:
+ * -
+ *
+ * Features Tested:
+ * -
+ *
+ * Cases Tested:
+ * -
+ *
+ * Description:
+ * -
+ *
+ * Environment:
+ * -
+ *
+ * Input:
+ * - None.
+ *
+ * Output:
+ * - File name, Line number, and failed expression on failure.
+ * - No output on success.
+ *
+ * Assumptions:
+ * -
+ *
+ * Pass Criteria:
+ * - Process returns zero exit status.
+ *
+ * Fail Criteria:
+ * - Process returns non-zero exit status.
+ */
+
+#include "test.h"
+
+void * func(void * arg)
+{
+ int policy;
+ struct sched_param param;
+
+ assert(pthread_getschedparam(pthread_self(), &policy, &param) == 0);
+ assert(policy == SCHED_OTHER);
+ return (void *) param.sched_priority;
+}
+
+int
+main()
+{
+ pthread_t t;
+ pthread_attr_t attr;
+ void * result = NULL;
+ struct sched_param param;
+ int maxPrio = sched_get_priority_max(SCHED_OTHER);
+ int minPrio = sched_get_priority_min(SCHED_OTHER);
+
+ assert(pthread_attr_init(&attr) == 0);
+ assert(pthread_attr_setinheritsched(&attr, PTHREAD_EXPLICIT_SCHED) == 0);
+
+ for (param.sched_priority = minPrio;
+ param.sched_priority <= maxPrio;
+ param.sched_priority++)
+ {
+ assert(pthread_attr_setschedparam(&attr, &param) == 0);
+ assert(pthread_create(&t, &attr, func, NULL) == 0);
+ pthread_join(t, &result);
+ assert((int) result == param.sched_priority);
+ }
+
+ return 0;
+}
diff --git a/tests/priority2.c b/tests/priority2.c
new file mode 100644
index 0000000..4dcf385
--- /dev/null
+++ b/tests/priority2.c
@@ -0,0 +1,80 @@
+/*
+ * File: priority2.c
+ *
+ * Test Synopsis:
+ * - Test thread priority setting after creation.
+ *
+ * Test Method (Validation or Falsification):
+ * -
+ *
+ * Requirements Tested:
+ * -
+ *
+ * Features Tested:
+ * -
+ *
+ * Cases Tested:
+ * -
+ *
+ * Description:
+ * -
+ *
+ * Environment:
+ * -
+ *
+ * Input:
+ * - None.
+ *
+ * Output:
+ * - File name, Line number, and failed expression on failure.
+ * - No output on success.
+ *
+ * Assumptions:
+ * -
+ *
+ * Pass Criteria:
+ * - Process returns zero exit status.
+ *
+ * Fail Criteria:
+ * - Process returns non-zero exit status.
+ */
+
+#include "test.h"
+
+pthread_mutex_t startMx = PTHREAD_MUTEX_INITIALIZER;
+
+void * func(void * arg)
+{
+ int policy;
+ struct sched_param param;
+
+ assert(pthread_mutex_lock(&startMx) == 0);
+ assert(pthread_getschedparam(pthread_self(), &policy, &param) == 0);
+ assert(pthread_mutex_unlock(&startMx) == 0);
+ assert(policy == SCHED_OTHER);
+ return (void *) param.sched_priority;
+}
+
+int
+main()
+{
+ pthread_t t;
+ void * result = NULL;
+ struct sched_param param;
+ int maxPrio = sched_get_priority_max(SCHED_OTHER);
+ int minPrio = sched_get_priority_min(SCHED_OTHER);
+
+ for (param.sched_priority = minPrio;
+ param.sched_priority <= maxPrio;
+ param.sched_priority++)
+ {
+ assert(pthread_mutex_lock(&startMx) == 0);
+ assert(pthread_create(&t, NULL, func, NULL) == 0);
+ assert(pthread_setschedparam(t, SCHED_OTHER, &param) == 0);
+ assert(pthread_mutex_unlock(&startMx) == 0);
+ pthread_join(t, &result);
+ assert((int) result == param.sched_priority);
+ }
+
+ return 0;
+}