Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* pthread.h: Conditionally added some #defines from config.h
needed when not building the library. e.g. NEED_ERRNO, NEED_SEM.
(PTW32_DLLPORT): Now only defined if _DLL defined.
(_errno): Compiler directive was incorrectly including prototype.
* sched.h: Conditionally added some #defines from config.h
needed when not building the library.
* semaphore.h: Replace an instance of NEED_SEM that should
have been NEED_ERRNO. This change currently has nil effect.
* GNUmakefile: Correct some recent changes.
* Makefile: Add rule to generate pre-processor output.
|
|
exit() rather than pthread_exit(). Add comments to explain
why.
* rwlock2_t.c: New test.
* rwlock3_t.c: New test.
* rwlock4_t.c: New test.
* rwlock5_t.c: New test.
* rwlock6_t.c: New test.
* rwlock6_t2.c: New test.
* rwlock6.c (main): Swap thread and result variables
to correspond to actual thread functions.
* rwlock1.c: Change test description comment to correspond
to the actual test.
|
|
critical section to solve deadlock problem.
* pthread.c: Add all remaining C modules.
* pthread.h: Use dllexport/dllimport attributes on functions
to avoid using pthread.def.
* sched.h: Likewise.
* semaphore.h: Likewise.
* GNUmakefile: Add new targets for single translation
unit build to maximise inlining potential; generate
pthread.def automatically.
* Makefile: Likewise, but no longer uses pthread.def.
|
|
|
|
|
|
conditional compilation; refinements; bug fixes. See the ChangeLog.
|
|
to disable cancelation at the start of a thread's cancelation
run to prevent double cancelation. The main problem
arises if a thread is canceling and then receives a subsequent
async cancel request.
* private.c: Likewise.
* condvar.c: Place pragmas around cleanup_push/pop to turn
off inline optimisation (/Obn where n>0 - MSVC only). Various
optimisation switches in MSVC turn this on, which interferes with
the way that cleanup handlers are run in C++ EH and SEH
code. Application code compiled with inline optimisation must
also wrap cleanup_push/pop blocks with the pragmas, e.g.
#pragma inline_depth(0)
pthread_cleanup_push(...)
...
pthread_cleanup_pop(...)
#pragma inline_depth(8)
* rwlock.c: Likewise.
* mutex.c: Remove attempts to inline some functions.
* signal.c: Modify misleading comment.
tests/
* mutex8: New test.
* mutex8n: New test.
* mutex8e: New test.
* mutex8r: New test.
* cancel6a: New test.
* cancel6d: New test.
* cleanup0.c: Add pragmas for inline optimisation control.
* cleanup1.c: Add pragmas for inline optimisation control.
* cleanup2.c: Add pragmas for inline optimisation control.
* cleanup3.c: Add pragmas for inline optimisation control.
* condvar7.c: Add pragmas for inline optimisation control.
* condvar8.c: Add pragmas for inline optimisation control.
* condvar9.c: Add pragmas for inline optimisation control.
|
|
WSAGetLastError() and WSASetLastError().
* Makefile (wsock32.lib): Likewise.
* create.c: Minor mostly inert changes.
* implement.h (PTW32_MAX): Move into here and renamed
from sched.h.
(PTW32_MIN): Likewise.
* GNUmakefile (TEST_ICE): Define if testing internal
implementation of InterlockedCompareExchange.
* Makefile (TEST_ICE): Likewise.
* private.c (TEST_ICE): Likewise.
|
|
* spin.c: Revamped and working; included static initialiser.
* barrier.c: Likewise.
* condvar.c: Macro constant change; inline auto init routine.
* mutex.c: Likewise.
* rwlock.c: Likewise.
* private.c: Add support for spinlock initialiser.
* global.c: Likewise.
* implement.h: Likewise.
* pthread.h (PTHREAD_SPINLOCK_INITIALIZER): Fix typo.
tests/ChangeLog:
* spin3.c: Changed test and fixed.
* spin4.c: Fixed.
* barrier3.c: Fixed.
* barrier4.c: Fixed.
|
|
* pthread.h (rand_r): Fake using _seed argument to quell
compiler warning (compiler should optimise this away later).
* GNUmakefile (OPT): Leave symbolic information out of the library
and increase optimisation level - for smaller faster prebuilt
dlls.
2001-05-29 Ross Johnson <rpj@setup1.ise.canberra.edu.au>
Contributed by - Milan Gardian <Milan.Gardian@LEIBINGER.com>
* Makefile: fix typo.
* pthreads.h: Fix problems with stdcall/cdecl conventions, in particular
remove the need for PT_STDCALL everywhere; remove warning supression.
* (errno): Fix the longstanding "inconsistent dll linkage" problem
with errno; now also works with /MD debugging libs -
warnings emerged when compiling pthreads library with /MD (or /MDd)
compiler switch, instead of /MT (or /MTd) (i.e. when compiling pthreads
using Multithreaded DLL CRT instead of Multithreaded statically linked
CRT).
* create.c (pthread_create): Likewise; fix typo.
* private.c (ptw32_threadStart): Eliminate use of terminate() which doesn't
throw exceptions.
* Remove unnecessary #includes from a number of modules -
[I had to #include malloc.h in implement.h for gcc - rpj].
2001-05-29 Ross Johnson <rpj@setup1.ise.canberra.edu.au>
Contributed by - Thomas Pfaff <tpfaff@gmx.net>
* pthread.h (PTHREAD_MUTEX_DEFAULT): New; equivalent to
PTHREAD_MUTEX_DEFAULT_NP.
* (PTHREAD_MUTEX_NORMAL): Similarly.
* (PTHREAD_MUTEX_ERRORCHECK): Similarly.
* (PTHREAD_MUTEX_RECURSIVE): Similarly.
* (pthread_mutex_setdefaultkind_np): New; Linux compatibility stub
for pthread_mutexattr_settype.
* (pthread_mutexattr_getkind_np): New; Linux compatibility stub
for pthread_mutexattr_gettype.
* mutex.c (pthread_mutexattr_settype): New; allow
the following types of mutex:
PTHREAD_MUTEX_DEFAULT_NP
PTHREAD_MUTEX_NORMAL_NP
PTHREAD_MUTEX_ERRORCHECK_NP
PTHREAD_MUTEX_RECURSIVE_NP
* Note that PTHREAD_MUTEX_DEFAULT is equivalent to
PTHREAD_MUTEX_NORMAL - ie. mutexes should no longer
be recursive by default, and a thread will deadlock if it
tries to relock a mutex it already owns. This is inline with
other pthreads implementations.
* (pthread_mutex_lock): Process the lock request
according to the mutex type.
* (pthread_mutex_init): Eliminate use of Win32 mutexes as the
basis of POSIX mutexes - instead, a combination of one critical section
and one semaphore are used in conjunction with Win32 Interlocked* routines.
* (pthread_mutex_destroy): Likewise.
* (pthread_mutex_lock): Likewise.
* (pthread_mutex_trylock): Likewise.
* (pthread_mutex_unlock): Likewise.
* Use longjmp/setjmp to implement cancelation when building the library
using a C compiler which doesn't support exceptions, e.g. gcc -x c (note
that gcc -x c++ uses exceptions).
* Also fixed some of the same typos and eliminated PT_STDCALL as
Milan Gardian's patches above.
2001-02-07 Ross Johnson <rpj@special.ise.canberra.edu.au>
Contributed by - Alexander Terekhov <TEREKHOV@de.ibm.com>
* rwlock.c: Revamped.
* implement.h (pthread_rwlock_t_): Redefined.
This implementation does not have reader/writer starvation problem.
Rwlock attempts to behave more like a normal mutex with
races and scheduling policy determining who is more important;
It also supports recursive locking,
has less synchronization overhead (no broadcasts at all,
readers are not blocked on any condition variable) and seem to
be faster than the current implementation [W98 appears to be
approximately 15 percent faster at least - on top of speed increase
from Thomas Pfaff's changes to mutex.c - rpj].
|
|
2000-12-29 Ross Johnson <rpj@special.ise.canberra.edu.au>
* Makefile: Back-out "for" loops which don't work.
* GNUmakefile: Remove the fake.a target; add the "realclean"
target; don't remove built libs under the "clean" target.
* config.h: Add a guard against multiple inclusion.
* semaphore.h: Add some defines from config.h to make
semaphore.h independent of config.h when building apps.
* pthread.h (_errno): Back-out previous fix until we know how to
fix it properly.
* implement.h (lockCount): Add missing element to pthread_mutex_t_.
* sync.c (pthread_join): Spelling fix in comment.
* private.c (ptw32_threadStart): Reset original termination
function (C++).
(ptw32_threadStart): Cleanup detached threads early in case
the library is statically linked.
(ptw32_callUserDestroyRoutines): Remove [SEH] __try block from
destructor call so that unhandled exceptions will be passed through
to the system; call terminate() from [C++] try block for the same
reason.
* tsd.c (pthread_getspecific): Add comment.
* mutex.c (pthread_mutex_init): Initialise new elements in
pthread_mutex_t.
(pthread_mutex_unlock): Invert "pthread_equal()" test.
2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au>
* semaphore.c (mode_t): Use ifndef HAVE_MODE_T to include definition.
* config.h.in (HAVE_MODE_T): Added.
(_UWIN): Start adding defines for the UWIN package.
./tests/ChangeLog:
2000-12-29 Ross Johnson <rpj@special.ise.canberra.edu.au>
* GNUmakefile: Add mutex4 test; ensure libpthreadw32.a is
removed for "clean" target.
* Makefile: Add mutex4 test.
* exception3.c: Remove SEH code; automatically pass the test
under SEH (which is an N/A environment).
* mutex4.c: New test.
* eyal1.c (do_work_unit): Add a dummy "if" to force the
optimiser to retain code; reduce thread work loads.
* condvar8.c (main): Add an additional "assert" for debugging;
increase pthread_cond_signal timeout.
|
|
* misc.c (pthread_self): Restore Win32 "last error"
cleared by TlsGetValue() call in
pthread_getspecific()
- "Steven Reddie" <smr@essemer.com.au>
2000-09-20 Ross Johnson <rpj@setup1.ise.canberra.edu.au>
* mutex.c (pthread_mutex_lock): Record the owner
of the mutex. This requires also keeping count of
recursive locks ourselves rather than leaving it
to Win32 since we need to know when to NULL the
thread owner when the mutex is unlocked.
(pthread_mutex_trylock): Likewise.
(pthread_mutex_unlock): Check that the calling
thread owns the mutex, decrement the recursive
lock count, and NULL the owner if zero. Return
EPERM if the mutex is owned by another thread.
* implement.h (pthread_mutex_t_): Add ownerThread
and lockCount members.
- reported by Arthur Kantor <akantor@bexusa.com>
|
|
* Several: Fix typos from scripted edit session
yesterday.
* nonportable.c (pthread_mutexattr_setforcecs_np):
Moved this function from mutex.c.
(pthread_getw32threadhandle_np): New function to
return the win32 thread handle that the POSIX
thread is using.
* mutex.c (pthread_mutexattr_setforcecs_np):
Moved to new file "nonportable.c".
* pthread.h (PTW32_BUILD): Only redefine __except
and catch compiler keywords if we aren't building
the library (ie. PTW32_BUILD is not defined) -
this is safer than defining and then undefining
if not building the library.
* implement.h: Remove __except and catch undefines.
* Makefile (CFLAGS): Define PTW32_BUILD.
* GNUmakefile (CFLAGS): Define PTW32_BUILD.
* All appropriate: Change Pthread_exception* to
ptw32_exception* to be consistent with internal
identifier naming.
* private.c (ptw32_throw): New function to provide
a generic exception throw for all internal
exceptions and EH schemes.
(ptw32_threadStart): pthread_exit() value is now
returned via the thread structure exitStatus
element.
* exit.c (pthread_exit): pthread_exit() value is now
returned via the thread structure exitStatus
element.
* cancel.c (ptw32_cancel_self): Now uses ptw32_throw.
(pthread_setcancelstate): Ditto.
(pthread_setcanceltype): Ditto.
(pthread_testcancel): Ditto.
(pthread_cancel): Ditto.
* misc.c (CancelableWait): Ditto.
* exit.c (pthread_exit): Ditto.
* All applicable: Change PTW32_ prefix to
PTW32_ prefix to remove leading underscores
from private library identifiers.
|
|
* errno.c: Add _MD precompile condition; thus far
had no effect when using /MD compile option but I
thnk it should be there.
* exit.c: Add __cplusplus to various #if lines;
was compiling SEH code even when VC++ had
C++ compile options.
* private.c: ditto.
* create.c (pthread_create): Add PT_STDCALL macro to
function pointer arg in _beginthread().
* pthread.h: PT_STDCALL really does need to be defined
in both this and impliment.h; don't set it to __cdecl
- this macro is only used to extend function pointer
casting for functions that will be passed as parameters.
(~PThreadCleanup): add cast and group expression.
(_errno): Add _MD compile conditional.
(PtW32NoCatchWarn): Change pragma message.
* implement.h: Move and change PT_STDCALL define.
* need_errno.h: Add _MD to compilation conditional.
* GNUmakefile: Substantial rewrite for new naming
convention; set for nil optimisation (turn it up
when we have a working library build; add target
"fake.a" to build a libpthreadw32.a from the VC++
built DLL pthreadVCE.dll.
* pthread.def (LIBRARY): Don't specify in the .def
file - it is specified on the linker command line
since we now use the same .def file for variously
named .dlls.
* Makefile: Substantial rewrite for new naming
convention; default nmake target only issues a
help message; run nmake with specific target
corresponding to the EH scheme being used.
* README: Update information; add naming convention
explanation.
* ANNOUNCE: Update information.
2000-08-12 Ross Johnson <rpj@special.ise.canberra.edu.au>
* pthread.h: Add compile-time message when using
MSC_VER compiler and C++ EH to warn application
programmers to use PtW32Catch instead of catch(...)
if they want cancelation and pthread_exit to work.
* implement.h: Remove #include <semaphore.h>; we
use our own local semaphore.h.
tests/ChangeLog:
2000-08-13 Ross Johnson <rpj@special.ise.canberra.edu.au>
* condvar3.c: Minor change to eliminate compiler
warning.
* condvar4.c: ditto.
* condvar5.c: ditto.
* condvar6.c: ditto.
* condvar7.c: ditto.
* condvar8.c: ditto.
* condvar9.c: ditto.
* exit1.c: Function needed return statement.
* cleanup1.c: Remove unnecessary printf arg.
* cleanup2.c: Fix cast.
* rwlock6.c: Fix casts.
* exception1.c (PtW32CatchAll): Had the wrong name;
fix casts.
* cancel3.c: Remove unused waitLock variable.
* GNUmakefile: Change library/dll naming; add new tests;
general minor changes.
* Makefile: Change library/dll naming; add targets for
testing each of the two VC++ EH scheme versions;
default target now issues help message; compile warnings
now interpreted as errors to stop the make; add new
tests; restructure to remove prerequisites needed
otherwise.
* README: Updated.
|
|
* cleanup.c (pthread_pop_cleanup): Remove _pthread
prefix from __except and catch keywords; implement.h
now simply undefines _pthread__except and
_pthread_catch if defined; VC++ was not textually
substituting _pthread_catch etc back to catch as
it was redefined; the reason for using the prefixed
version was to make it clear that it was not using
the pthread.h redefined catch keyword.
* private.c (_pthread_threadStart): Ditto.
(_pthread_callUserDestroyRoutines): Ditto.
* implement.h (_pthread__except): Remove #define.
(_pthread_catch): Remove #define.
* GNUmakefile (pthread.a): New target to build
libpthread32.a from pthread.dll using dlltool.
* buildlib.bat: Duplicate cl commands with args to
build C++ EH version of pthread.dll; use of .bat
files is redundant now that nmake compatible
Makefile is included; used as a kludge only now.
* Makefile: Localise some macros and fix up the clean:
target to extend it and work properly.
* CONTRIBUTORS: Add contributors.
* ANNOUNCE: Updated.
* README: Updated.
tests/ChangeLog:
2000-08-10 Ross Johnson <rpj@special.ise.canberra.edu.au>
* eyal1.c (main): Change implicit cast to explicit
cast when passing "print_server" function pointer;
G++ no longer allows implicit func parameter casts.
* cleanup1.c: Remove unused "waitLock".
(main): Fix implicit parameter cast.
* cancel2.c (main): Fix implicit parameter cast.
* cancel4.c (main): Fix implicit parameter cast.
* cancel3.c (main): Fix implicit parameter cast.
* GNUmakefile: Renamed from Makefile; Add missing
cancel1 and cancel2 test targets.
* Makefile: Converted for use with MS nmake.
|
|
* sched.c (sched_get_priority_max): Handle different WinCE and
Win32 priority values together.
(sched_get_priority_min): Ditto.
- Tristan Savatier <tristan@mpegtv.com>
* create.c (pthread_create): Force new threads to wait until
pthread_create has the new thread's handle; we also retain
a local copy of the handle for internal use until
pthread_create returns.
* private.c (_pthread_threadStart): Initialise ei[].
(_pthread_threadStart): When beginthread is used to start the
thread, force waiting until the creator thread had the
thread handle.
* cancel.c (_pthread_cancel_thread): Include context switch
code for defined(_X86_) environments in addition to _M_IX86.
* rwlock.c (pthread_rwlock_destroy): Assignment changed
to avoid compiler warning.
* private.c (_pthread_get_exception_services_code): Cast
NULL return value to avoid compiler warning.
* cleanup.c (pthread_pop_cleanup): Initialise "cleanup" variable
to avoid compiler warnings.
* misc.c (_pthread_new): Change "new" variable to "t" to avoid
confusion with the C++ keyword of the same name.
* condvar.c (cond_wait_cleanup): Initialise lastWaiter variable.
(cond_timedwait): Remove unused local variables. to avoid
compiler warnings.
* dll.c (dllMain): Remove 2000-07-21 change - problem
appears to be in pthread_create().
2000-07-22 Ross Johnson <rpj@special.ise.canberra.edu.au>
* tsd.c (pthread_key_create): If a destructor was given
and the pthread_mutex_init failed, then would try to
reference a NULL pointer (*key); eliminate this section of
code by using a dynamically initialised mutex
(PTHREAD_MUTEX_INITIALIZER).
* tsd.c (pthread_setspecific): Return an error if
unable to set the value; simplify cryptic conditional.
* tsd.c (pthread_key_delete): Locking threadsLock relied
on mutex_lock returning an error if the key has no destructor.
ThreadsLock is only initialised if the key has a destructor.
Making this mutex a static could reduce the number of mutexes
used by an application since it is actually created only at
first use and it's often destroyed soon after.
2000-07-22 Ross Johnson <rpj@special.ise.canberra.edu.au>
* FAQ: Added Q5 and Q6.
tests/ChangeLog:
2000-07-25 Ross Johnson <rpj@special.ise.canberra.edu.au>
* runtest.bat: modified to work under W98.
* runall.bat: Add new tests; modified to work under W98.
It was ok under NT.
* Makefile: Add new tests.
* exception1.c: New; Test passing exceptions back to the
application and retaining library internal exceptions.
* join0.c: New; Test a single join.
|
|
|
|
* Makefile: Remove inconsistencies in 'cl' args
- Erik Hensema <erik.hensema@group2000.nl>
|
|
- asynchronous cancellation added
- attempt to hide internal exceptions from applications
- kernel32 load/free problem fixed
- new tests
- changes only to comments in some tests
|
|
The following code for POSIX read/write locks was contributed
by Aurelio Medina.
* implement.h (pthread_rwlock_t_): Add.
* pthread.h (pthread_rwlock_t): Add.
(PTHREAD_RWLOCK_INITIALIZER): Add.
Add rwlock function prototypes.
* rwlock.c: New module.
* pthread.def: Add new rwlock functions.
* private.c (_pthread_processInitialize): initialise
_pthread_rwlock_test_init_lock critical section.
* global.c (_pthread_rwlock_test_init_lock): Add.
* mutex.c (pthread_mutex_destroy): Don't free mutex memory
if mutex is PTHREAD_MUTEX_INITIALIZER and has not been
initialised yet.
tests/ChangeLog
Sep 15 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>
* rwlock1.c: New test.
* rwlock2.c: New test.
* rwlock3.c: New test.
* rwlock4.c: New test.
|
|
* all: Add GNU LGPL and Copyright and Warranty.
|
|
* Makefile.in: Use libpthread32.a as the name of the DLL export
library instead of pthread.lib.
* condvar.c (pthread_cond_init): cv could have been used unitialised;
initialise.
* create.c (pthread_create): parms could have been used unitialised;
initialise.
Add "Makefile" for people who don't want to (or can't) run ./configure.
|
|
* configure.in: Test for required system features.
* configure: Generate.
* acconfig.h: New file.
* config.h.in: Generate.
* Makefile.in: Renamed from Makefile.
* COPYING: Import from a recent GNU package.
* config.guess: Likewise.
* config.sub: Likewise.
* install-sh: Likewise.
* Makefile: Remove.
* config.h: Likewise.
|
|
* {most}.c: Include <errno.h> to get POSIX error values.
* signal.c (pthread_sigmask): Only provide if HAVE_SIGSET_T is
defined.
* config.h: #undef features, don't #define them. This will be
generated by autoconf very soon.
|
|
* Makefile (LIB): Define.
(clean): Define target.
(all): Build a library not just the object files.
* pthread.h: Provide a definition for struct timespec if we don't
already have one.
* windows.c (TlsGetValue): Bug fix.
|
|
* windows.h: Remove duplicate TlsSetValue() prototype. Add
TlsGetValue() prototype.
(FALSE): Define.
(TRUE): Likewise.
Add forgotten errno values. Guard against multiple #includes.
* windows.c: New file. Implement stubs for Win32 functions.
* Makefile (SRCS): Remove. Not explicitly needed.
(CFLAGS): Add -Wall for all warnings with GCC.
|
|
* config.h: Create. This is a temporary stand-in for autoconf yet
to be done.
(HAVE_SIGNAL_H): Add.
* pthread.h: Minor rearrangement for temporary config.h.
|
|
* Makefile (SRCS): Create. Preliminary.
* windows.h: Create. Contains Win32 definitions for compile
testing. This is just a standin for the real one.
* pthread.h (SIG_UNBLOCK): Fix typo. Was SIG_BLOCK.
(windows.h): Add include. Required for CRITICAL_SECTION.
(pthread_cond_t): Move enum declaration outside of struct
definition.
(unistd.h): Add include - may be temporary.
* condvar.c (windows.h): Add include.
|