summaryrefslogtreecommitdiff
path: root/private.c
AgeCommit message (Collapse)Author
2004-10-08Mutex speedupsrpj
2004-05-17re-indentation, bug fixes, hooks for pre-emptive async cancelationrpj
2003-08-19Updated Copyright notice (date and contact address).rpj
2002-02-18Major reorganisation of source code; new routine and tests added.rpj
2002-02-08Copyright notice updates; module splitting; POSIX versionrpj
conditional compilation; refinements; bug fixes. See the ChangeLog.
2002-02-02 * cancel.c: Rearranged some code and introduced checksrpj
to disable cancelation at the start of a thread's cancelation run to prevent double cancelation. The main problem arises if a thread is canceling and then receives a subsequent async cancel request. * private.c: Likewise. * condvar.c: Place pragmas around cleanup_push/pop to turn off inline optimisation (/Obn where n>0 - MSVC only). Various optimisation switches in MSVC turn this on, which interferes with the way that cleanup handlers are run in C++ EH and SEH code. Application code compiled with inline optimisation must also wrap cleanup_push/pop blocks with the pragmas, e.g. #pragma inline_depth(0) pthread_cleanup_push(...) ... pthread_cleanup_pop(...) #pragma inline_depth(8) * rwlock.c: Likewise. * mutex.c: Remove attempts to inline some functions. * signal.c: Modify misleading comment. tests/ * mutex8: New test. * mutex8n: New test. * mutex8e: New test. * mutex8r: New test. * cancel6a: New test. * cancel6d: New test. * cleanup0.c: Add pragmas for inline optimisation control. * cleanup1.c: Add pragmas for inline optimisation control. * cleanup2.c: Add pragmas for inline optimisation control. * cleanup3.c: Add pragmas for inline optimisation control. * condvar7.c: Add pragmas for inline optimisation control. * condvar8.c: Add pragmas for inline optimisation control. * condvar9.c: Add pragmas for inline optimisation control.
2002-01-312002-01-27 Ross Johnson <rpj@special.ise.canberra.edu.au>rpj
* mutex.c (pthread_mutex_timedlock): New function suggested by Alexander Terekhov. The logic required to implement this properly came from Alexander, with some collaboration with Thomas Pfaff. (pthread_mutex_unlock): Wrap the waiters check and sema post in a critical section to prevent a race with pthread_mutex_timedlock. (ptw32_timed_semwait): New function; returns a special result if the absolute timeout parameter represents a time already passed when called; used by pthread_mutex_timedwait(). Have deliberately not reused the name "ptw32_sem_timedwait" because they are not the same routine. * condvar.c (ptw32_cond_timedwait): Use the new sem_timedwait() instead of ptw32_sem_timedwait(), which now has a different function. See previous. * implement.h: Remove prototype for ptw32_sem_timedwait. See next. (pthread_mutex_t_): Add critical section element for access to lock_idx during mutex post-timeout processing. * semaphore.h (sem_timedwait): See next. * semaphore.c (sem_timedwait): See next. * private.c (ptw32_sem_timedwait): Move to semaphore.c and rename as sem_timedwait(). 2002-01-18 Ross Johnson <rpj@special.ise.canberra.edu.au> * sync.c (pthread_join): Was getting the exit code from the calling thread rather than the joined thread if defined(__MINGW32__) && !defined(__MSVCRT__). 2002-01-15 Ross Johnson <rpj@special.ise.canberra.edu.au> * pthread.h: Unless the build explicitly defines __CLEANUP_SEH, __CLEANUP_CXX, or __CLEANUP_C, then the build defaults to __CLEANUP_C style cleanup. This style uses setjmp/longjmp in the cancelation and thread exit implementations and therefore won't do stack unwinding if linked to applications that have it (e.g. C++ apps). This is currently consistent with most/all commercial Unix POSIX threads implementations. * spin.c (pthread_spin_init): Edit renamed function call. * nonportable.c (pthread_num_processors_np): New. (pthread_getprocessors_np): Renamed to ptw32_getprocessors and moved to private.c. * private.c (pthread_getprocessors): Moved here from nonportable.c. * pthread.def (pthread_getprocessors_np): Removed from export list. * rwlock.c (pthread_rwlockattr_init): New. (pthread_rwlockattr_destroy): New. (pthread_rwlockattr_getpshared): New. (pthread_rwlockattr_setpshared): New.
2002-01-08 * mutex.c (pthread_mutex_trylock): userpj
ptw32_interlocked_compare_exchange function pointer rather than ptw32_InterlockedCompareExchange() directly to retain portability to non-iX86 processors, e.g. WinCE etc. The pointer will point to the native OS version of InterlockedCompareExchange() if the OS supports it (see ChangeLog entry of 2001-10-17).
2001-12-18Include an interim complete Copyright notice in each source file;rpj
Remove unused autoconf files; Add the file COPYING, which describes the pthread-win32 license relative to the FSF LGPL.
2001-10-25 * GNUmakefile (libwsock32): Add to linker flags forrpj
WSAGetLastError() and WSASetLastError(). * Makefile (wsock32.lib): Likewise. * create.c: Minor mostly inert changes. * implement.h (PTW32_MAX): Move into here and renamed from sched.h. (PTW32_MIN): Likewise. * GNUmakefile (TEST_ICE): Define if testing internal implementation of InterlockedCompareExchange. * Makefile (TEST_ICE): Likewise. * private.c (TEST_ICE): Likewise.
2001-10-25 * barrier.c: Move _LONG and _LPLONG defines intorpj
implement.h; rename to PTW32_INTERLOCKED_LONG and PTW32_INTERLOCKED_LPLONG respectively. * spin.c: Likewise; ptw32_interlocked_compare_exchange used in place of InterlockedCompareExchange directly. * global.c (ptw32_interlocked_compare_exchange): Add prototype for this new routine pointer to be used when InterlockedCompareExchange isn't supported by Windows. * nonportable.c (pthread_win32_process_attach_np): Check for support of InterlockedCompareExchange in kernel32 and assign its address to ptw32_interlocked_compare_exchange if it exists, or our own ix86 specific implementation ptw32_InterlockedCompareExchange. *private.c (ptw32_InterlockedCompareExchange): An implementation of InterlockedCompareExchange() which is specific to ix86; written directly in assembler for either MSVC or GNU C; needed because Windows 95 doesn't support InterlockedCompareExchange(). * sched.c (sched_get_priority_min): Extend to return THREAD_PRIORITY_IDLE. (sched_get_priority_max): Extend to return THREAD_PRIORITY_CRITICAL.
2001-07-10Untested revamp of barrier.c.rpj
* barrier.c: Still more revamping. The exclusive access mutex isn't really needed so it has been removed and replaced by an InterlockedDecrement(). nSerial has been removed. iStep is now dual-purpose. The process shared attribute is now stored in the barrier struct. * implement.h (pthread_barrier_t_): Lost some/gained one elements. * private.c (ptw32_threadStart): Removed some comments.
2001-07-08Barriers fixed and tested more extensively.rpj
* barrier.c: Fix several bugs in all routines. Now passes tests/barrier5.c which is fairly rigorous. There is still a non-optimal work-around for a race condition between the barrier breeched event signal and event wait. Basically the last (signalling) thread to hit the barrier yields to allow any other threads, which may have lost the race, to complete. tests/ChangeLog: * barrier3.c: Fixed. * barrier4.c: Fixed. * barrier5.c: New; proves that all threads in the group reaching the barrier wait and then resume together. Repeats the test using groups of 1 to 16 threads. Each group of threads must negotiate a large number of barriers (10000). * spin4.c: Fixed. * test.h (error_string): Modified the success (0) value.
2001-07-06Spinlocks and barriers fixed and working. Beta level.rpj
* spin.c: Revamped and working; included static initialiser. * barrier.c: Likewise. * condvar.c: Macro constant change; inline auto init routine. * mutex.c: Likewise. * rwlock.c: Likewise. * private.c: Add support for spinlock initialiser. * global.c: Likewise. * implement.h: Likewise. * pthread.h (PTHREAD_SPINLOCK_INITIALIZER): Fix typo. tests/ChangeLog: * spin3.c: Changed test and fixed. * spin4.c: Fixed. * barrier3.c: Fixed. * barrier4.c: Fixed.
2001-06-19 * Made organisational-only changes to UWIN additions.rpj
* dll.c (dllMain): Moved UWIN process attach code to pthread_win32_process_attach_np(); moved instance of pthread_count to global.c. * global.c (pthread_count): Moved from dll.c. * nonportable.c (pthread_win32_process_attach_np): Moved _UWIN code to here from dll.c. * implement.h (pthread_count): Define extern int. * create.c (pthread_count): Remove extern int. * private.c (pthread_count): Likewise. * exit.c (pthread_count): Likewise. Contributed by - David Korn <dgk@research.att.com> * dll.c: Added changes necessary to work with UWIN. * create.c: Likewise. * pthread.h: Likewise. * misc.c: Likewise. * exit.c: Likewise. * private.c: Likewise. * implement.h: Likewise. There is some room at the start of struct pthread_t_ to implement the signal semantics in UWIN's posix.dll although this is not yet complete. * Nmakefile: Compatible with UWIN's Nmake utility. * Nmakefile.tests: Likewise - for running the tests.
2001-06-11 * semaphore.h (sem_t): Fixed for compile and test.rpj
* implement.h (sem_t_): Likewise. * semaphore.c: Likewise. * private.c (ptw32_sem_timedwait): Updated to use new opaque sem_t. tests/ * mutex5.c: Insert inert change to quell compiler warnings. * condvar3_2.c: Remove unused variable.
2001-05-312001-05-30 Ross Johnson <rpj@setup1.ise.canberra.edu.au>rpj
* pthread.h (rand_r): Fake using _seed argument to quell compiler warning (compiler should optimise this away later). * GNUmakefile (OPT): Leave symbolic information out of the library and increase optimisation level - for smaller faster prebuilt dlls. 2001-05-29 Ross Johnson <rpj@setup1.ise.canberra.edu.au> Contributed by - Milan Gardian <Milan.Gardian@LEIBINGER.com> * Makefile: fix typo. * pthreads.h: Fix problems with stdcall/cdecl conventions, in particular remove the need for PT_STDCALL everywhere; remove warning supression. * (errno): Fix the longstanding "inconsistent dll linkage" problem with errno; now also works with /MD debugging libs - warnings emerged when compiling pthreads library with /MD (or /MDd) compiler switch, instead of /MT (or /MTd) (i.e. when compiling pthreads using Multithreaded DLL CRT instead of Multithreaded statically linked CRT). * create.c (pthread_create): Likewise; fix typo. * private.c (ptw32_threadStart): Eliminate use of terminate() which doesn't throw exceptions. * Remove unnecessary #includes from a number of modules - [I had to #include malloc.h in implement.h for gcc - rpj]. 2001-05-29 Ross Johnson <rpj@setup1.ise.canberra.edu.au> Contributed by - Thomas Pfaff <tpfaff@gmx.net> * pthread.h (PTHREAD_MUTEX_DEFAULT): New; equivalent to PTHREAD_MUTEX_DEFAULT_NP. * (PTHREAD_MUTEX_NORMAL): Similarly. * (PTHREAD_MUTEX_ERRORCHECK): Similarly. * (PTHREAD_MUTEX_RECURSIVE): Similarly. * (pthread_mutex_setdefaultkind_np): New; Linux compatibility stub for pthread_mutexattr_settype. * (pthread_mutexattr_getkind_np): New; Linux compatibility stub for pthread_mutexattr_gettype. * mutex.c (pthread_mutexattr_settype): New; allow the following types of mutex: PTHREAD_MUTEX_DEFAULT_NP PTHREAD_MUTEX_NORMAL_NP PTHREAD_MUTEX_ERRORCHECK_NP PTHREAD_MUTEX_RECURSIVE_NP * Note that PTHREAD_MUTEX_DEFAULT is equivalent to PTHREAD_MUTEX_NORMAL - ie. mutexes should no longer be recursive by default, and a thread will deadlock if it tries to relock a mutex it already owns. This is inline with other pthreads implementations. * (pthread_mutex_lock): Process the lock request according to the mutex type. * (pthread_mutex_init): Eliminate use of Win32 mutexes as the basis of POSIX mutexes - instead, a combination of one critical section and one semaphore are used in conjunction with Win32 Interlocked* routines. * (pthread_mutex_destroy): Likewise. * (pthread_mutex_lock): Likewise. * (pthread_mutex_trylock): Likewise. * (pthread_mutex_unlock): Likewise. * Use longjmp/setjmp to implement cancelation when building the library using a C compiler which doesn't support exceptions, e.g. gcc -x c (note that gcc -x c++ uses exceptions). * Also fixed some of the same typos and eliminated PT_STDCALL as Milan Gardian's patches above. 2001-02-07 Ross Johnson <rpj@special.ise.canberra.edu.au> Contributed by - Alexander Terekhov <TEREKHOV@de.ibm.com> * rwlock.c: Revamped. * implement.h (pthread_rwlock_t_): Redefined. This implementation does not have reader/writer starvation problem. Rwlock attempts to behave more like a normal mutex with races and scheduling policy determining who is more important; It also supports recursive locking, has less synchronization overhead (no broadcasts at all, readers are not blocked on any condition variable) and seem to be faster than the current implementation [W98 appears to be approximately 15 percent faster at least - on top of speed increase from Thomas Pfaff's changes to mutex.c - rpj].
2000-12-29./ChangeLog:rpj
2000-12-29 Ross Johnson <rpj@special.ise.canberra.edu.au> * Makefile: Back-out "for" loops which don't work. * GNUmakefile: Remove the fake.a target; add the "realclean" target; don't remove built libs under the "clean" target. * config.h: Add a guard against multiple inclusion. * semaphore.h: Add some defines from config.h to make semaphore.h independent of config.h when building apps. * pthread.h (_errno): Back-out previous fix until we know how to fix it properly. * implement.h (lockCount): Add missing element to pthread_mutex_t_. * sync.c (pthread_join): Spelling fix in comment. * private.c (ptw32_threadStart): Reset original termination function (C++). (ptw32_threadStart): Cleanup detached threads early in case the library is statically linked. (ptw32_callUserDestroyRoutines): Remove [SEH] __try block from destructor call so that unhandled exceptions will be passed through to the system; call terminate() from [C++] try block for the same reason. * tsd.c (pthread_getspecific): Add comment. * mutex.c (pthread_mutex_init): Initialise new elements in pthread_mutex_t. (pthread_mutex_unlock): Invert "pthread_equal()" test. 2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au> * semaphore.c (mode_t): Use ifndef HAVE_MODE_T to include definition. * config.h.in (HAVE_MODE_T): Added. (_UWIN): Start adding defines for the UWIN package. ./tests/ChangeLog: 2000-12-29 Ross Johnson <rpj@special.ise.canberra.edu.au> * GNUmakefile: Add mutex4 test; ensure libpthreadw32.a is removed for "clean" target. * Makefile: Add mutex4 test. * exception3.c: Remove SEH code; automatically pass the test under SEH (which is an N/A environment). * mutex4.c: New test. * eyal1.c (do_work_unit): Add a dummy "if" to force the optimiser to retain code; reduce thread work loads. * condvar8.c (main): Add an additional "assert" for debugging; increase pthread_cond_signal timeout.
2000-12-28./ChangeLog:rpj
2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au> * private.c (ptw32_threadStart): Unhandled exceptions are now passed through to the system to deal with. This is consistent with normal Windows behaviour. C++ applications may use set_terminate() to override the default behaviour which is to call ptw32_terminate(). Ptw32_terminate() cleans up some POSIX thread stuff before calling the system default function which calls abort(). The users termination function should conform to standard C++ semantics which is to not return. It should exit the thread (call pthread_exit()) or exit the application. * private.c (ptw32_terminate): Added as the default set_terminate() function. It calls the system default function after cleaning up some POSIX thread stuff. * implement.h (ptw32_try_enter_critical_section): Move declaration. * global.c (ptw32_try_enter_critical_section): Moved from dll.c. * dll.c: Move process and thread attach/detach code into functions in nonportable.c. * nonportable.c (pthread_win32_process_attach_np): Process attach code from dll.c is now available to static linked applications. * nonportable.c (pthread_win32_process_detach_np): Likewise. * nonportable.c (pthread_win32_thread_attach_np): Likewise. * nonportable.c (pthread_win32_thread_detach_np): Likewise. * pthread.h: Add new non-portable prototypes for static linked applications. * GNUmakefile (OPT): Increase optimisation flag and remove debug info flag. * pthread.def: Add new non-portable exports for static linked applications. 2000-12-11 Ross Johnson <rpj@special.ise.canberra.edu.au> * FAQ: Update Answer 6 re getting a fully working Mingw32 built library. 2000-09-09 Ross Johnson <rpj@special.ise.canberra.edu.au> * pthread.h (ctime_r): Fix arg. ./tests/ChangeLog: 2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au> * eyal1.c: Increase thread work loads. * exception2.c: New test. * exception3.c: New test. * Makefile: Add new tests exception2.c and exception3.c. * GNUmakefile: Likewise. 2000-12-11 Ross Johnson <rpj@special.ise.canberra.edu.au> * cleanup3.c: Remove unused variable. * cleanup2.c: Likewise. * exception1.c: Throw an exception rather than use a deliberate zero divide so that catch(...) will handle it under Mingw32. Mingw32 now builds the library correctly to pass all tests - see Thomas Pfaff's detailed instructions re needed changes to Mingw32 in the Pthreads-Win32 FAQ.
2000-09-072000-09-08 Ross Johnson <rpj@special.ise.canberra.edu.au>rpj
* cancel.c (pthread_cancel): Must get "self" through calling pthread_self() which will ensure a POSIX thread struct is built for non-POSIX threads; return an error if this fails - Ollie Leahy <ollie@mpt.ie> (pthread_setcancelstate): Likewise. (pthread_setcanceltype): Likewise. * misc.c (ptw32_cancelable_wait): Likewise. * private.c (ptw32_tkAssocCreate): Remove unused #if 0 wrapped code. * pthread.h (ptw32_get_exception_services_code): Needed to be forward declared unconditionally. 2000-09-06 Ross Johnson <rpj@special.ise.canberra.edu.au> * cancel.c (pthread_cancel): If called from the main thread "self" would be NULL; get "self" via pthread_self() instead of directly from TLS so that an implicit pthread object is created. * misc.c (pthread_equal): Strengthen test for NULLs.
2000-08-222000-08-22 Ross Johnson <rpj@setup1.ise.canberra.edu.au>rpj
* private.c (ptw32_throw): Fix exception test; move exceptionInformation declaration. * tsd.c (pthread_key_create): newkey wrongly declared. * pthread.h: Fix comment block.
2000-08-182000-08-18 Ross Johnson <rpj@special.ise.canberra.edu.au>rpj
* mutex.c (pthread_mutex_destroy): Check that the mutex isn't held; invalidate the mutex as early as possible to avoid contention; not perfect - FIXME! * rwlock.c (pthread_rwlock_init): Remove redundant assignment to "rw". (pthread_rwlock_destroy): Invalidate the rwlock before freeing up any of it's resources - to avoid contention. * private.c (ptw32_tkAssocCreate): Change assoc->lock to use a dynamically initialised mutex - only consumes a W32 mutex or critical section when first used, not before. * mutex.c (pthread_mutex_init): Remove redundant assignment to "mx". (pthread_mutexattr_destroy): Set attribute to NULL before freeing it's memory - to avoid contention.
2000-08-182000-08-18 Ross Johnson <rpj@setup1.ise.canberra.edu.au>rpj
* Several: Fix typos from scripted edit session yesterday. * nonportable.c (pthread_mutexattr_setforcecs_np): Moved this function from mutex.c. (pthread_getw32threadhandle_np): New function to return the win32 thread handle that the POSIX thread is using. * mutex.c (pthread_mutexattr_setforcecs_np): Moved to new file "nonportable.c". * pthread.h (PTW32_BUILD): Only redefine __except and catch compiler keywords if we aren't building the library (ie. PTW32_BUILD is not defined) - this is safer than defining and then undefining if not building the library. * implement.h: Remove __except and catch undefines. * Makefile (CFLAGS): Define PTW32_BUILD. * GNUmakefile (CFLAGS): Define PTW32_BUILD. * All appropriate: Change Pthread_exception* to ptw32_exception* to be consistent with internal identifier naming. * private.c (ptw32_throw): New function to provide a generic exception throw for all internal exceptions and EH schemes. (ptw32_threadStart): pthread_exit() value is now returned via the thread structure exitStatus element. * exit.c (pthread_exit): pthread_exit() value is now returned via the thread structure exitStatus element. * cancel.c (ptw32_cancel_self): Now uses ptw32_throw. (pthread_setcancelstate): Ditto. (pthread_setcanceltype): Ditto. (pthread_testcancel): Ditto. (pthread_cancel): Ditto. * misc.c (CancelableWait): Ditto. * exit.c (pthread_exit): Ditto. * All applicable: Change PTW32_ prefix to PTW32_ prefix to remove leading underscores from private library identifiers.
2000-08-172000-08-17 Ross Johnson <rpj@special.ise.canberra.edu.au>rpj
* All applicable: Change _pthread_ prefix to ptw32_ prefix to remove leading underscores from private library identifiers (single and double leading underscores are reserved in the ANSI C standard for compiler implementations).
2000-08-142000-08-13 Ross Johnson <rpj@special.ise.canberra.edu.au>rpj
* errno.c: Add _MD precompile condition; thus far had no effect when using /MD compile option but I thnk it should be there. * exit.c: Add __cplusplus to various #if lines; was compiling SEH code even when VC++ had C++ compile options. * private.c: ditto. * create.c (pthread_create): Add PT_STDCALL macro to function pointer arg in _beginthread(). * pthread.h: PT_STDCALL really does need to be defined in both this and impliment.h; don't set it to __cdecl - this macro is only used to extend function pointer casting for functions that will be passed as parameters. (~PThreadCleanup): add cast and group expression. (_errno): Add _MD compile conditional. (PtW32NoCatchWarn): Change pragma message. * implement.h: Move and change PT_STDCALL define. * need_errno.h: Add _MD to compilation conditional. * GNUmakefile: Substantial rewrite for new naming convention; set for nil optimisation (turn it up when we have a working library build; add target "fake.a" to build a libpthreadw32.a from the VC++ built DLL pthreadVCE.dll. * pthread.def (LIBRARY): Don't specify in the .def file - it is specified on the linker command line since we now use the same .def file for variously named .dlls. * Makefile: Substantial rewrite for new naming convention; default nmake target only issues a help message; run nmake with specific target corresponding to the EH scheme being used. * README: Update information; add naming convention explanation. * ANNOUNCE: Update information. 2000-08-12 Ross Johnson <rpj@special.ise.canberra.edu.au> * pthread.h: Add compile-time message when using MSC_VER compiler and C++ EH to warn application programmers to use PtW32Catch instead of catch(...) if they want cancelation and pthread_exit to work. * implement.h: Remove #include <semaphore.h>; we use our own local semaphore.h. tests/ChangeLog: 2000-08-13 Ross Johnson <rpj@special.ise.canberra.edu.au> * condvar3.c: Minor change to eliminate compiler warning. * condvar4.c: ditto. * condvar5.c: ditto. * condvar6.c: ditto. * condvar7.c: ditto. * condvar8.c: ditto. * condvar9.c: ditto. * exit1.c: Function needed return statement. * cleanup1.c: Remove unnecessary printf arg. * cleanup2.c: Fix cast. * rwlock6.c: Fix casts. * exception1.c (PtW32CatchAll): Had the wrong name; fix casts. * cancel3.c: Remove unused waitLock variable. * GNUmakefile: Change library/dll naming; add new tests; general minor changes. * Makefile: Change library/dll naming; add targets for testing each of the two VC++ EH scheme versions; default target now issues help message; compile warnings now interpreted as errors to stop the make; add new tests; restructure to remove prerequisites needed otherwise. * README: Updated.
2000-08-112000-08-10 Ross Johnson <rpj@special.ise.canberra.edu.au>snap-2000-08-10rpj
* cleanup.c (pthread_pop_cleanup): Remove _pthread prefix from __except and catch keywords; implement.h now simply undefines _pthread__except and _pthread_catch if defined; VC++ was not textually substituting _pthread_catch etc back to catch as it was redefined; the reason for using the prefixed version was to make it clear that it was not using the pthread.h redefined catch keyword. * private.c (_pthread_threadStart): Ditto. (_pthread_callUserDestroyRoutines): Ditto. * implement.h (_pthread__except): Remove #define. (_pthread_catch): Remove #define. * GNUmakefile (pthread.a): New target to build libpthread32.a from pthread.dll using dlltool. * buildlib.bat: Duplicate cl commands with args to build C++ EH version of pthread.dll; use of .bat files is redundant now that nmake compatible Makefile is included; used as a kludge only now. * Makefile: Localise some macros and fix up the clean: target to extend it and work properly. * CONTRIBUTORS: Add contributors. * ANNOUNCE: Updated. * README: Updated. tests/ChangeLog: 2000-08-10 Ross Johnson <rpj@special.ise.canberra.edu.au> * eyal1.c (main): Change implicit cast to explicit cast when passing "print_server" function pointer; G++ no longer allows implicit func parameter casts. * cleanup1.c: Remove unused "waitLock". (main): Fix implicit parameter cast. * cancel2.c (main): Fix implicit parameter cast. * cancel4.c (main): Fix implicit parameter cast. * cancel3.c (main): Fix implicit parameter cast. * GNUmakefile: Renamed from Makefile; Add missing cancel1 and cancel2 test targets. * Makefile: Converted for use with MS nmake.
2000-08-062000-08-06 Ross Johnson <rpj@special.ise.canberra.edu.au>rpj
* pthread.h: Remove #warning - VC++ doesn't accept it. 2000-08-05 Ross Johnson <rpj@special.ise.canberra.edu.au> * pthread.h (PtW32CatchAll): Add macro. When compiling applications using VC++ with C++ EH rather than SEH 'PtW32CatchAll' must be used in place of any 'catch( ... )' if the application wants pthread cancelation or pthread_exit() to work. 2000-08-03 Ross Johnson <rpj@special.ise.canberra.edu.au> * pthread.h: Add a base class Pthread_exception for library internal exceptions and change the "catch" re-define macro to use it. 2000-08-02 Ross Johnson <rpj@special.ise.canberra.edu.au> * GNUmakefile (CFLAGS): Add -mthreads. Add new targets to generate cpp and asm output. * sync.c (pthread_join): Remove dead code. tests: 2000-08-06 Ross Johnson <rpj@special.ise.canberra.edu.au> * ccl.bat: Add /nologo to remove extraneous output. * exception1.c (exceptionedThread): Init 'dummy'; put expression into if condition to prevent optimising away; remove unused variable. * cancel4.c (mythread): Cast return value to avoid warnings. * cancel2.c (mythread): Missing #endif. * condvar9.c (mythread): Cast return value to avoid warnings. * condvar8.c (mythread): Cast return value to avoid warnings. * condvar7.c (mythread): Cast return value to avoid warnings. * cleanup3.c (mythread): Cast return value to avoid warnings. * cleanup2.c (mythread): Cast return value to avoid warnings. * cleanup1.c (mythread): Cast return value to avoid warnings. * condvar5.c (mythread): Cast return value to avoid warnings. * condvar3.c (mythread): Cast return value to avoid warnings. * condvar6.c (mythread): Cast return value to avoid warnings. * condvar4.c (mythread): Cast return value to avoid warnings. 2000-08-05 Ross Johnson <rpj@special.ise.canberra.edu.au> * cancel2.c: Use PtW32CatchAll macro if defined. * exception1.c: Use PtW32CatchAll macro if defined. 2000-08-02 Ross Johnson <rpj@special.ise.canberra.edu.au> * tsd1.c: Fix typecasts of &result [g++ is now very fussy]. * test.h (assert): Return 0's explicitly to allay g++ errors. * join2.c: Add explicit typecasts. * join1.c: Add explicit typecasts. * join0.c: Add explicit typecasts. * eyal1.c: Add explicit typecasts. * count1.c (main): Add type cast to remove g++ parse warning [gcc-2.95.2 seems to have tightened up on this]. * Makefile (GLANG): Use c++ explicitly. Remove MSVC sections (was commented out). Add target to generate cpp output.
2000-07-252000-07-25 Ross Johnson <rpj@special.ise.canberra.edu.au>rpj
* sched.c (sched_get_priority_max): Handle different WinCE and Win32 priority values together. (sched_get_priority_min): Ditto. - Tristan Savatier <tristan@mpegtv.com> * create.c (pthread_create): Force new threads to wait until pthread_create has the new thread's handle; we also retain a local copy of the handle for internal use until pthread_create returns. * private.c (_pthread_threadStart): Initialise ei[]. (_pthread_threadStart): When beginthread is used to start the thread, force waiting until the creator thread had the thread handle. * cancel.c (_pthread_cancel_thread): Include context switch code for defined(_X86_) environments in addition to _M_IX86. * rwlock.c (pthread_rwlock_destroy): Assignment changed to avoid compiler warning. * private.c (_pthread_get_exception_services_code): Cast NULL return value to avoid compiler warning. * cleanup.c (pthread_pop_cleanup): Initialise "cleanup" variable to avoid compiler warnings. * misc.c (_pthread_new): Change "new" variable to "t" to avoid confusion with the C++ keyword of the same name. * condvar.c (cond_wait_cleanup): Initialise lastWaiter variable. (cond_timedwait): Remove unused local variables. to avoid compiler warnings. * dll.c (dllMain): Remove 2000-07-21 change - problem appears to be in pthread_create(). 2000-07-22 Ross Johnson <rpj@special.ise.canberra.edu.au> * tsd.c (pthread_key_create): If a destructor was given and the pthread_mutex_init failed, then would try to reference a NULL pointer (*key); eliminate this section of code by using a dynamically initialised mutex (PTHREAD_MUTEX_INITIALIZER). * tsd.c (pthread_setspecific): Return an error if unable to set the value; simplify cryptic conditional. * tsd.c (pthread_key_delete): Locking threadsLock relied on mutex_lock returning an error if the key has no destructor. ThreadsLock is only initialised if the key has a destructor. Making this mutex a static could reduce the number of mutexes used by an application since it is actually created only at first use and it's often destroyed soon after. 2000-07-22 Ross Johnson <rpj@special.ise.canberra.edu.au> * FAQ: Added Q5 and Q6. tests/ChangeLog: 2000-07-25 Ross Johnson <rpj@special.ise.canberra.edu.au> * runtest.bat: modified to work under W98. * runall.bat: Add new tests; modified to work under W98. It was ok under NT. * Makefile: Add new tests. * exception1.c: New; Test passing exceptions back to the application and retaining library internal exceptions. * join0.c: New; Test a single join.
2000-01-04Main changes (see ChangeLog diff for details and attributions):-rpj
- asynchronous cancellation added - attempt to hide internal exceptions from applications - kernel32 load/free problem fixed - new tests - changes only to comments in some tests
1999-11-041999-11-05 Ross Johnson <rpj@ixobrychus.canberra.edu.au>rpj
* general: Patched for portability to WinCE. The details are described in the file WinCE-PORT. Follow the instructions in README.WinCE to make the appropriate changes in config.h. - Tristan Savatier <tristan@mpegtv.com>
1999-09-15Sat Sep 10 12:56:13 1999 Ross Johnson <rpj@swan.canberra.edu.au>rpj
The following code for POSIX read/write locks was contributed by Aurelio Medina. * implement.h (pthread_rwlock_t_): Add. * pthread.h (pthread_rwlock_t): Add. (PTHREAD_RWLOCK_INITIALIZER): Add. Add rwlock function prototypes. * rwlock.c: New module. * pthread.def: Add new rwlock functions. * private.c (_pthread_processInitialize): initialise _pthread_rwlock_test_init_lock critical section. * global.c (_pthread_rwlock_test_init_lock): Add. * mutex.c (pthread_mutex_destroy): Don't free mutex memory if mutex is PTHREAD_MUTEX_INITIALIZER and has not been initialised yet. tests/ChangeLog Sep 15 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * rwlock1.c: New test. * rwlock2.c: New test. * rwlock3.c: New test. * rwlock4.c: New test.
1999-08-221999-08-22 Ross Johnson <rpj@ixobrychus.canberra.edu.au>rpj
* exit.c (pthread_exit): Fix reference to potentially uninitialised pointer. 1999-08-21 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * private.c (_pthread_threadStart): Apply fix of 1999-08-19 this time to C++ and non-trapped C versions. Ommitted to do this the first time through. tests/ChangeLog: Aug 22 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * runall.bat (join2): Add test.
1999-08-191999-08-19 Ross Johnson <rpj@ixobrychus.canberra.edu.au>rpj
* private.c (_pthread_threadStart): Return exit status from the application thread startup routine. - Milan Gardian <mg@tatramed.sk> 1999-08-18 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * exit.c (pthread_exit): Put status into pthread_t->exitStatus - John Bossom <john.Bossom@cognos.com> * private.c (_pthread_threadStart): Set pthread->exitStatus on exit of try{} block. - John Bossom <john.Bossom@cognos.com> * sync.c (pthread_join): use pthread_exitStatus value if the thread exit doesn't return a value (for Mingw32 CRTDLL which uses endthread instead of _endthreadex). - John Bossom <john.Bossom@cognos.com> Tue Aug 17 20:17:58 CDT 1999 Mumit Khan <khan@xraylith.wisc.edu> * create.c (pthread_create): Add CRTDLL suppport. * exit.c (pthread_exit): Likewise. * private.c (_pthread_threadStart): Likewise. (_pthread_threadDestroy): Likewise. * sync.c (pthread_join): Likewise. * tests/join1.c (main): Warn about partial support for CRTDLL. Tue Aug 17 20:00:08 1999 Mumit Khan <khan@xraylith.wisc.edu> * Makefile.in (LD): Delete entry point. * acconfig.h (STDCALL): Delete unused macro. * configure.in: Remove test for STDCALL. * config.h.in: Regenerate. * errno.c (_errno): Fix self type. * pthread.h (PT_STDCALL): Move from here to * implement.h (PT_STDCALL): here. (_pthread_threadStart): Fix prototype. * private.c (_pthread_threadStart): Likewise. 1999-08-14 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * exit.c (pthread_exit): Don't call pthread_self() but get thread handle directly from TSD for efficiency.
1999-08-12ChangeLog:rpj
1999-08-12 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * private.c (_pthread_threadStart): ei[] only declared if _MSC_VER. tests/ChangeLog: Wed Aug 12 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * Makefile (LIBS): Add -L.
1999-08-12Merged patches to main trunk.rpj
1999-04-03./ChangeLogrpj
Sun Apr 4 11:05:57 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * sched.c (sched.h): Include. * sched.h: New file for POSIX 1b scheduling. * pthread.h: Move opaque structures to implement.h; move sched_* prototypes out and into sched.h. * implement.h: Add opaque structures from pthread.h. * sched.c (sched_yield): New function. * condvar.c (_pthread_sem_*): Rename to sem_*; except for _pthread_sem_timedwait which is an private function. Sat Apr 3 23:28:00 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * Makefile.in (OBJS): Add errno.o. Fri Apr 2 11:08:50 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * implement.h (_pthread_sem_*): Remove prototypes now defined in semaphore.h. * pthread.h (sempahore.h): Include. * semaphore.h: New file for POSIX 1b semaphores. * pthread.h (_pthread_sem_t): Change to sem_t. * semaphore.c (_pthread_sem_*): Change to sem_*; these functions will be exported from the library; set errno on error. - John Bossom <jebossom@cognos.com> (_pthread_sem_timedwait): Moved to private.c. * private.c (_pthread_sem_timedwait): Moved from semaphore.c; set errno on error. * errno.c (_errno): New file. New function. - John Bossom * pthread.h (pthread_t_): Add per-thread errno element. tests/ChangeLog Sun Apr 4 12:04:28 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * tsd1.c (mythread): Change Sleep(0) to sched_yield(). (sched.h): Include. * condvar3.c (mythread): Remove redundant Sleep(). * runtest.bat: Re-organised to make more informative.
1999-03-23Wed Mar 24 11:32:07 1999 Ross Johnson <rpj@swan.canberra.edu.au>rpj
* misc.c (CancelableWait): Initialise exceptionInformation[2]. (pthread_self): Get a real Win32 thread handle for implicit threads. * cancel.c (pthread_testcancel): Initialise exceptionInformation[2]. * implement.h (SE_INFORMATION): Fix values. * private.c (_pthread_threadDestroy): Close the thread handle. Fri Mar 19 12:57:27 1999 Ross Johnson <rpj@swan.canberra.edu.au> * cancel.c (comments): Update and cleanup. Fri Mar 19 09:12:59 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * private.c (_pthread_threadStart): status returns PTHREAD_CANCELED. * pthread.h (PTHREAD_CANCELED): defined.
1999-03-18==> ChangeLog <==rpj
Fri Mar 19 09:12:59 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * private.c (_pthread_threadStart): status returns PTHREAD_CANCELED. * pthread.h (PTHREAD_CANCELED): defined. ==> tests/ChangeLog <== Fri Mar 19 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * *.bat: redirect unwanted output to nul: * runall.bat: new. * cancel1.c: new. Not part of suite yet.
1999-03-16Tue Mar 16 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>rpj
* all: Add GNU LGPL and Copyright and Warranty.
1999-03-07Mon Mar 8 11:18:59 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>rpj
* misc.c (CancelableWait): Ensure cancelEvent handle is the lowest indexed element in the handles array. Enhance test for abandoned objects. * pthread.h (PTHREAD_MUTEX_INITIALIZER): Trailing elements not initialised are set to zero by the compiler. This avoids the problem of initialising the opaque critical section element in it. (PTHREAD_COND_INITIALIZER): Ditto. * semaphore.c (_pthread_sem_timedwait): Check sem == NULL earlier. Sun Mar 7 12:31:14 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * condvar.c (pthread_cond_init): set semaphore initial value to 0, not 1. cond_timedwait was returning signaled immediately. * misc.c (CancelableWait): Place the cancel event handle first in the handle table for WaitForMultipleObjects. This ensures that the cancel event is recognised and acted apon if both objects happen to be signaled together. * private.c (_pthread_cond_test_init_lock): Initialise and destroy. * implement.h (_pthread_cond_test_init_lock): Add extern. * global.c (_pthread_cond_test_init_lock): Add declaration. * condvar.c (pthread_cond_destroy): check for valid initialised CV; flag destroyed CVs as invalid. (pthread_cond_init): pthread_cond_t is no longer just a pointer. This is because PTHREAD_COND_INITIALIZER needs state info to reside in pthread_cond_t so that it can initialise on first use. Will work on making pthread_cond_t (and other objects like it) opaque again, if possible, later. (cond_timedwait): add check for statically initialisation of CV; initialise on first use. (pthread_cond_signal): check for valid CV. (pthread_cond_broadcast): check for valid CV. (_cond_check_need_init): Add. * pthread.h (PTHREAD_COND_INITIALIZER): Fix. (pthread_cond_t): no longer a pointer to pthread_cond_t_. (pthread_cond_t_): add 'staticinit' and 'valid' elements. tests/ChangeLog Sun Mar 7 10:41:52 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * Makefile (condvar3, condvar4): Add tests. * condvar4.c (General): Reduce to simple test case; prerequisite is condvar3.c; add description. * condvar3.c (General): Reduce to simple test case; prerequisite is condvar2.c; add description. * condvar2.c (General): Reduce to simple test case; prerequisite is condvar1.c; add description. * condvar1.c (General): Reduce to simple test case; add description. * Template.c (Comments): Add generic test detail.
1999-02-02Mods to compile under Mingw32 egcs.rpj
Tue Feb 2 18:07:43 1999 Ross Johnson <rpj@swan.canberra.edu.au> * implement.h: Add #include <pthread.h>. Change sem_t to _pthread_sem_t. Various patches by Kevin Ruland <Kevin.Ruland@anheuser-busch.com> * signal.c (pthread_sigmask): Add and modify casts. Reverse LHS/RHS bitwise assignments. * pthread.h: Remove #include <semaphore.h>. (_PTHREAD_ATTR_VALID): Add cast. (struct pthread_t_): Add sigmask element. * dll.c: Add "extern C" for DLLMain. (DllMain): Add cast. * create.c (pthread_create): Set sigmask in thread. * condvar.c: Remove #include. Change sem_* to _pthread_sem_*. * attr.c: Changed #include. * Makefile.in: Additional targets and changes to build the library as a DLL. Fri Jan 29 11:56:28 1999 Ross Johnson <rpj@swan.canberra.edu.au> * Makefile.in (OBJS): Add semaphore.o to list. * semaphore.c (_pthread_sem_timedwait): Move from private.c. Rename sem_* to _pthread_sem_*. * pthread.h (pthread_cond_t): Change type of sem_t. _POSIX_SEMAPHORES no longer defined. * semaphore.h: Contents moved to implement.h. Removed from source tree. * implement.h: Add semaphore function prototypes and ename all functions to prepend '_pthread_'. They are now private to the pthreads-win32 implementation. * private.c: Change #warning. Move _pthread_sem_timedwait() to semaphore.c. * cleanup.c: Change #warning. * misc.c: Remove #include <errno.h> * pthread.def: Cleanup CVS merge conflicts. * global.c: Ditto. * ChangeLog: Ditto. * cleanup.c: Ditto.
1999-01-23Fixing problems building with GNU compilers:rpj
Sun Jan 24 01:34:52 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * semaphore.c (sem_wait): Remove second arg to pthreadCancelableWait() call. Fri Jan 22 14:31:59 1999 Ross Johnson <rpj@swan.canberra.edu.au> * Makefile.in (CFLAGS): Remove -fhandle-exceptions. Not needed with egcs. Add -g for debugging. * create.c (pthread_create): Replace __stdcall with PT_STDCALL macro. This is a hack and must be fixed. * misc.c (CancelableWait): Remove redundant statement. * mutex.c (pthread_mutexattr_init): Cast calloc return value. * misc.c (CancelableWait): Add cast. (pthread_self): Add cast. * exit.c (pthread_exit): Add cast. * condvar.c (pthread_condattr_init): Cast calloc return value. * cleanup.c: Reorganise conditional compilation. * attr.c (pthread_attr_init): Remove unused 'result'. Cast malloc return value. * private.c (_pthread_callUserDestroyRoutines): Redo conditional compilation. * misc.c (CancelableWait): C++ version uses 'throw'. * cancel.c (pthread_testcancel): Ditto. * implement.h (class pthread_exception): Define for C++. * pthread.h: Fix C, C++, and Win32 SEH condition compilation mayhem around pthread_cleanup_* defines. C++ version now uses John Bossom's cleanup handlers. (pthread_attr_t): Make 'valid' unsigned. Define '_timeb' as 'timeb' for Ming32. Define PT_STDCALL as nothing for Mingw32. May be temporary. * cancel.c (pthread_testcancel): Cast return value.
1999-01-20Wed Jan 20 09:31:28 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>rpj
* pthread.h (pthread_mutexattr_t): Changed to a pointer. * mutex.c (pthread_mutex_init): Conditionally create Win32 mutex - from John Bossom's implementation. (pthread_mutex_destroy): Conditionally close Win32 mutex - from John Bossom's implementation. (pthread_mutexattr_init): Replaced by John Bossom's version. (pthread_mutexattr_destroy): Ditto. (pthread_mutexattr_getpshared): New function from John Bossom's implementation. (pthread_mutexattr_setpshared): New function from John Bossom's implementation. Tue Jan 19 18:27:42 1999 Ross Johnson <rpj@swan.canberra.edu.au> * pthread.h (pthreadCancelableTimedWait): New prototype. (pthreadCancelableWait): Remove second argument. * misc.c (CancelableWait): New static function is pthreadCancelableWait() renamed. (pthreadCancelableWait): Now just calls CancelableWait() with INFINITE timeout. (pthreadCancelableTimedWait): Just calls CancelableWait() with passed in timeout. * private.c (_pthread_sem_timedwait): 'abstime' arg really is absolute time. Calculate relative time to wait from current time before passing timeout to new routine pthreadCancelableTimedWait(). - Scott Lightner <scott@curriculum.com> Tue Jan 19 10:27:39 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * pthread.h (pthread_mutexattr_setforcecs_np): New prototype. * mutex.c (pthread_mutexattr_init): Init 'pshared' and 'forcecs' attributes to 0. (pthread_mutexattr_setforcecs_np): New function (not portable). * pthread.h (pthread_mutex_t): Add 'mutex' element. Set to NULL in PTHREAD_MUTEX_INITIALIZER. The pthread_mutex_*() routines will try to optimise performance by choosing either mutexes or critical sections as the basis for pthread mutexes for each indevidual mutex. (pthread_mutexattr_t_): Add 'forcecs' element. Some applications may choose to force use of critical sections if they know that:- the mutex is PROCESS_PRIVATE and, either the OS supports TryEnterCriticalSection() or pthread_mutex_trylock() will never be called on the mutex. This attribute will be setable via a non-portable routine. Note: We don't yet support PROCESS_SHARED mutexes, so the implementation as it stands will default to Win32 mutexes only if the OS doesn't support TryEnterCriticalSection. On Win9x, and early versions of NT 'forcecs' will need to be set in order to get critical section based mutexes. Sun Jan 17 12:01:26 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * pthread.h (PTHREAD_MUTEX_INITIALIZER): Init new 'staticinit' value to '1' and existing 'valid' value to '1'. * global.c (_pthread_mutex_test_init_lock): Add. * implement.h (_pthread_mutex_test_init_lock.): Add extern. * private.c (_pthread_processInitialize): Init critical section for global lock used by _mutex_check_need_init(). (_pthread_processTerminate): Ditto (:s/Init/Destroy/). * dll.c (dllMain): Move call to FreeLibrary() so that it is only called once when the process detaches. * mutex.c (_mutex_check_need_init): New static function to test and init PTHREAD_MUTEX_INITIALIZER mutexes. Provides serialised access to the internal state of the uninitialised static mutex. Called from pthread_mutex_trylock() and pthread_mutex_lock() which do a quick unguarded test to check if _mutex_check_need_init() needs to be called. This is safe as the test is conservative and is repeated inside the guarded section of _mutex_check_need_init(). Thus in all calls except the first calls to lock static mutexes, the additional overhead to lock any mutex is a single memory fetch and test for zero. * pthread.h (pthread_mutex_t_): Add 'staticinit' member. Mutexes initialised by PTHREAD_MUTEX_INITIALIZER aren't really initialised until the first attempt to lock it. Using the 'valid' flag (which flags the mutex as destroyed or not) to record this information would be messy. It is possible for a statically initialised mutex such as this to be destroyed before ever being used. * mutex.c (pthread_mutex_trylock): Call _mutex_check_need_init() to test/init PTHREAD_MUTEX_INITIALIZER mutexes. (pthread_mutex_lock): Ditto. (pthread_mutex_unlock): Add check to ensure we don't try to unlock an unitialised static mutex. (pthread_mutex_destroy): Add check to ensure we don't try to delete a critical section that we never created. Allows us to destroy a static mutex that has never been locked (and hence initialised). (pthread_mutex_init): Set 'staticinit' flag to 0 for the new mutex.
1999-01-18Tue Jan 19 18:27:42 1999 Ross Johnson <rpj@swan.canberra.edu.au>rpj
* pthread.h (pthreadCancelableTimedWait): New prototype. (pthreadCancelableWait): Remove second argument. * misc.c (CancelableWait): New static function is pthreadCancelableWait() renamed. (pthreadCancelableWait): Now just calls CancelableWait() with INFINITE timeout. (pthreadCancelableTimedWait): Just calls CancelableWait() with passed in timeout. * private.c (_pthread_sem_timedwait): 'abstime' arg really is absolute time. Calculate relative time to wait from current time before passing timeout to new routine pthreadCancelableTimedWait(). - Scott Lightner <scott@curriculum.com>
1999-01-16Sun Jan 17 12:01:26 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>snapshot-1999-01-17rpj
* private.c (_pthread_sem_timedwait): Move from semaphore.c. * semaphore.c : Remove redundant #includes. (_pthread_sem_timedwait): Move to private.c. (sem_wait): Add missing abstime arg to pthreadCancelableWait() call. 1999-01-17 Ross Johnson <rpj@ise.canberra.edu.au> * runtest: New script to build and run a test in the tests directory.
1999-01-13Thu Jan 14 14:27:13 1999 Ross Johnson <rpj@swan.canberra.edu.au>rpj
* cleanup.c: Correct _cplusplus to __cplusplus wherever used. * Makefile.in: Add CC=g++ and add -fhandle-exceptions to CFLAGS. The derived Makefile will compile all units of the package as C++ so that those which include try/catch exception handling should work properly. The package should compile ok if CC=gcc, however, exception handling will not be included and thus thread cancellation, for example, will not work. * cleanup.c (_pthread_pop_cleanup): Add #warning to compile this file as C++ if using a cygwin32 environment. Perhaps the whole package should be compiled using g++ under cygwin. * private.c (_pthread_threadStart): Change #error directive into #warning and bracket for __CYGWIN__ and derivative compilers.
1999-01-12Wed Jan 13 09:34:52 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au>rpj
* build.bat: Delete old binaries before compiling/linking. Tue Jan 12 09:58:38 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * dll.c: The Microsoft compiler pragmas probably are more appropriately protected by _MSC_VER than by _WIN32. - Tor Lillqvist <tml@iki.fi>. * condvar.c (pthread_cond_timedwait): Fix function description comments. * pthread.h: Define ETIMEDOUT. This should be returned by pthread_cond_timedwait which is not implemented yet as of snapshot-1999-01-04-1305. It was implemented in the older version. The Microsoft compiler pragmas probably are more appropriately protected by _MSC_VER than by _WIN32. - Tor Lillqvist <tml@iki.fi>. * pthread.def: pthread_mutex_destroy was missing from the def file - Tor Lillqvist <tml@iki.fi>. * condvar.c (pthread_cond_broadcast): Ensure we only wait on threads if there were any waiting on the condition. I think pthread_cond_broadcast should do the WaitForSingleObject only if cv->waiters > 0? Otherwise it seems to hang, at least in the testg thread program from glib. - Tor Lillqvist <tml@iki.fi>. * semaphore.c (sem_post): Correct typo in comment. Mon Jan 11 20:33:19 1999 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * pthread.h: Re-arrange conditional compile of pthread_cleanup-* macros. * cleanup.c (_pthread_push_cleanup): Provide conditional compile of cleanup->prev.
1999-01-04Parts of this package are going to have to be C++ in the GNU world because werpj
now use exception handling to implement thread cancellation. The MSC compiler appears to know about __try/__except blocks, but gcc (ie. the GNU ANSI C compiler) doesn't know about the equivalent C++ try/catch blocks. This should not be a problem since gcc and g++ are nearly always available together. Some file names may need to change in the CVS repository however. Tue Jan 5 16:33:04 1999 Ross Johnson <rpj@swan.canberra.edu.au> * cleanup.c (_pthread_pop_cleanup): Add C++ version of __try/__except block. Move trailing "}" out of #ifdef _WIN32 block left there by (my) mistake. * private.c: Remove #include <errno.h> which is included by pthread.h.
1999-01-03Merge John Bossom's code into the main trunk. See ChangeLog for details.snapshot-1999-01-04-1305rpj
This will be tagged as snapshot-1999-01-04-1305
1998-12-06As well as patches from Anders, this commit includes some older changesrpj
that hadn't been checked in. Those are to finish off the original TSD management scheme which will now start to be replaced by John Bossom's implementation. Anders' description of his changes:- Fixes the problem with `TryEnterCriticalSection' on w95 systems. Instead of directly calling `TryEnterCriticalSection' it tries to get a pointer at DLL startup and only calls the function if it exists. See ChangeLog for things changed. 1998-12-05 Anders Norlander <anorland@hem2.passagen.se> * implement.h (_pthread_try_enter_critical_section): New extern * dll.c (_pthread_try_enter_critical_section): New pointer to TryEnterCriticalSection if it exists; otherwise NULL. * dll.c (PthreadsEntryPoint): Initialize _pthread_try_enter_critical_section at startup and release kernel32 handle when DLL is being unloaded. * mutex.c (pthread_mutex_trylock): Replaced check for NT with a check if _pthread_try_enter_critical_section is valid pointer to a function. Call _pthread_try_enter_critical_section instead of TryEnterCriticalSection to avoid errors on Win95. Sun Nov 15 21:24:06 1998 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * cleanup.c (_pthread_destructor_run_all): Declare missing void * arg. Fixup CVS merge conflicts. Fri Oct 30 15:15:50 1998 Ross Johnson <rpj@swan.canberra.edu.au> * cleanup.c (_pthread_handler_push): Fixed bug appending new handler to list reported by Peter Slacik <Peter.Slacik@leibinger.freinet.de>. (new_thread): Rename poorly named local variable to "new_handler". Sat Oct 24 18:34:59 1998 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * global.c: Add TSD key management array and index declarations. * implement.h: Ditto for externs. Fri Oct 23 00:08:09 1998 Ross Johnson <rpj@ixobrychus.canberra.edu.au> * implement.h (_PTHREAD_TSD_KEY_REUSE): Add enum. * private.c (_pthread_delete_thread): Add call to _pthread_destructor_run_all() to clean up the threads keys. * cleanup.c (_pthread_destructor_run_all): Check for no more dirty keys to run destructors on. Assume that the destructor call always succeeds and set the key value to NULL.