| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
|
|
tests/benchmarks.
|
|
* pthread.h: Conditionally added some #defines from config.h
needed when not building the library. e.g. NEED_ERRNO, NEED_SEM.
(PTW32_DLLPORT): Now only defined if _DLL defined.
(_errno): Compiler directive was incorrectly including prototype.
* sched.h: Conditionally added some #defines from config.h
needed when not building the library.
* semaphore.h: Replace an instance of NEED_SEM that should
have been NEED_ERRNO. This change currently has nil effect.
* GNUmakefile: Correct some recent changes.
* Makefile: Add rule to generate pre-processor output.
|
|
exit() rather than pthread_exit(). Add comments to explain
why.
* rwlock2_t.c: New test.
* rwlock3_t.c: New test.
* rwlock4_t.c: New test.
* rwlock5_t.c: New test.
* rwlock6_t.c: New test.
* rwlock6_t2.c: New test.
* rwlock6.c (main): Swap thread and result variables
to correspond to actual thread functions.
* rwlock1.c: Change test description comment to correspond
to the actual test.
|
|
conditional compilation; refinements; bug fixes. See the ChangeLog.
|
|
indirection error introduced 2002-01-04.
(pthread_attr_getscope): Likewise.
* pthread.dsp (SOURCE): Add missing source files.
./tests/:
* exception3.c (main): Shorten wait time.
* mutex7.c: New test.
* mutex7n.c: New test.
* mutex7e.c: New test.
* mutex7r.c: New test.
* mutex6.c: Modified to avoid leaving the locked mutex
around on exit.
|
|
Remove unused autoconf files;
Add the file COPYING, which describes the pthread-win32 license
relative to the FSF LGPL.
|
|
|
|
* pthread.h (rand_r): Fake using _seed argument to quell
compiler warning (compiler should optimise this away later).
* GNUmakefile (OPT): Leave symbolic information out of the library
and increase optimisation level - for smaller faster prebuilt
dlls.
2001-05-29 Ross Johnson <rpj@setup1.ise.canberra.edu.au>
Contributed by - Milan Gardian <Milan.Gardian@LEIBINGER.com>
* Makefile: fix typo.
* pthreads.h: Fix problems with stdcall/cdecl conventions, in particular
remove the need for PT_STDCALL everywhere; remove warning supression.
* (errno): Fix the longstanding "inconsistent dll linkage" problem
with errno; now also works with /MD debugging libs -
warnings emerged when compiling pthreads library with /MD (or /MDd)
compiler switch, instead of /MT (or /MTd) (i.e. when compiling pthreads
using Multithreaded DLL CRT instead of Multithreaded statically linked
CRT).
* create.c (pthread_create): Likewise; fix typo.
* private.c (ptw32_threadStart): Eliminate use of terminate() which doesn't
throw exceptions.
* Remove unnecessary #includes from a number of modules -
[I had to #include malloc.h in implement.h for gcc - rpj].
2001-05-29 Ross Johnson <rpj@setup1.ise.canberra.edu.au>
Contributed by - Thomas Pfaff <tpfaff@gmx.net>
* pthread.h (PTHREAD_MUTEX_DEFAULT): New; equivalent to
PTHREAD_MUTEX_DEFAULT_NP.
* (PTHREAD_MUTEX_NORMAL): Similarly.
* (PTHREAD_MUTEX_ERRORCHECK): Similarly.
* (PTHREAD_MUTEX_RECURSIVE): Similarly.
* (pthread_mutex_setdefaultkind_np): New; Linux compatibility stub
for pthread_mutexattr_settype.
* (pthread_mutexattr_getkind_np): New; Linux compatibility stub
for pthread_mutexattr_gettype.
* mutex.c (pthread_mutexattr_settype): New; allow
the following types of mutex:
PTHREAD_MUTEX_DEFAULT_NP
PTHREAD_MUTEX_NORMAL_NP
PTHREAD_MUTEX_ERRORCHECK_NP
PTHREAD_MUTEX_RECURSIVE_NP
* Note that PTHREAD_MUTEX_DEFAULT is equivalent to
PTHREAD_MUTEX_NORMAL - ie. mutexes should no longer
be recursive by default, and a thread will deadlock if it
tries to relock a mutex it already owns. This is inline with
other pthreads implementations.
* (pthread_mutex_lock): Process the lock request
according to the mutex type.
* (pthread_mutex_init): Eliminate use of Win32 mutexes as the
basis of POSIX mutexes - instead, a combination of one critical section
and one semaphore are used in conjunction with Win32 Interlocked* routines.
* (pthread_mutex_destroy): Likewise.
* (pthread_mutex_lock): Likewise.
* (pthread_mutex_trylock): Likewise.
* (pthread_mutex_unlock): Likewise.
* Use longjmp/setjmp to implement cancelation when building the library
using a C compiler which doesn't support exceptions, e.g. gcc -x c (note
that gcc -x c++ uses exceptions).
* Also fixed some of the same typos and eliminated PT_STDCALL as
Milan Gardian's patches above.
2001-02-07 Ross Johnson <rpj@special.ise.canberra.edu.au>
Contributed by - Alexander Terekhov <TEREKHOV@de.ibm.com>
* rwlock.c: Revamped.
* implement.h (pthread_rwlock_t_): Redefined.
This implementation does not have reader/writer starvation problem.
Rwlock attempts to behave more like a normal mutex with
races and scheduling policy determining who is more important;
It also supports recursive locking,
has less synchronization overhead (no broadcasts at all,
readers are not blocked on any condition variable) and seem to
be faster than the current implementation [W98 appears to be
approximately 15 percent faster at least - on top of speed increase
from Thomas Pfaff's changes to mutex.c - rpj].
|
|
2000-12-29 Ross Johnson <rpj@special.ise.canberra.edu.au>
* Makefile: Back-out "for" loops which don't work.
* GNUmakefile: Remove the fake.a target; add the "realclean"
target; don't remove built libs under the "clean" target.
* config.h: Add a guard against multiple inclusion.
* semaphore.h: Add some defines from config.h to make
semaphore.h independent of config.h when building apps.
* pthread.h (_errno): Back-out previous fix until we know how to
fix it properly.
* implement.h (lockCount): Add missing element to pthread_mutex_t_.
* sync.c (pthread_join): Spelling fix in comment.
* private.c (ptw32_threadStart): Reset original termination
function (C++).
(ptw32_threadStart): Cleanup detached threads early in case
the library is statically linked.
(ptw32_callUserDestroyRoutines): Remove [SEH] __try block from
destructor call so that unhandled exceptions will be passed through
to the system; call terminate() from [C++] try block for the same
reason.
* tsd.c (pthread_getspecific): Add comment.
* mutex.c (pthread_mutex_init): Initialise new elements in
pthread_mutex_t.
(pthread_mutex_unlock): Invert "pthread_equal()" test.
2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au>
* semaphore.c (mode_t): Use ifndef HAVE_MODE_T to include definition.
* config.h.in (HAVE_MODE_T): Added.
(_UWIN): Start adding defines for the UWIN package.
./tests/ChangeLog:
2000-12-29 Ross Johnson <rpj@special.ise.canberra.edu.au>
* GNUmakefile: Add mutex4 test; ensure libpthreadw32.a is
removed for "clean" target.
* Makefile: Add mutex4 test.
* exception3.c: Remove SEH code; automatically pass the test
under SEH (which is an N/A environment).
* mutex4.c: New test.
* eyal1.c (do_work_unit): Add a dummy "if" to force the
optimiser to retain code; reduce thread work loads.
* condvar8.c (main): Add an additional "assert" for debugging;
increase pthread_cond_signal timeout.
|
|
2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au>
* private.c (ptw32_threadStart): Unhandled exceptions are
now passed through to the system to deal with. This is consistent
with normal Windows behaviour. C++ applications may use
set_terminate() to override the default behaviour which is
to call ptw32_terminate(). Ptw32_terminate() cleans up some
POSIX thread stuff before calling the system default function
which calls abort(). The users termination function should conform
to standard C++ semantics which is to not return. It should
exit the thread (call pthread_exit()) or exit the application.
* private.c (ptw32_terminate): Added as the default set_terminate()
function. It calls the system default function after cleaning up
some POSIX thread stuff.
* implement.h (ptw32_try_enter_critical_section): Move
declaration.
* global.c (ptw32_try_enter_critical_section): Moved
from dll.c.
* dll.c: Move process and thread attach/detach code into
functions in nonportable.c.
* nonportable.c (pthread_win32_process_attach_np): Process
attach code from dll.c is now available to static linked
applications.
* nonportable.c (pthread_win32_process_detach_np): Likewise.
* nonportable.c (pthread_win32_thread_attach_np): Likewise.
* nonportable.c (pthread_win32_thread_detach_np): Likewise.
* pthread.h: Add new non-portable prototypes for static
linked applications.
* GNUmakefile (OPT): Increase optimisation flag and remove
debug info flag.
* pthread.def: Add new non-portable exports for static
linked applications.
2000-12-11 Ross Johnson <rpj@special.ise.canberra.edu.au>
* FAQ: Update Answer 6 re getting a fully working
Mingw32 built library.
2000-09-09 Ross Johnson <rpj@special.ise.canberra.edu.au>
* pthread.h (ctime_r): Fix arg.
./tests/ChangeLog:
2000-12-28 Ross Johnson <rpj@special.ise.canberra.edu.au>
* eyal1.c: Increase thread work loads.
* exception2.c: New test.
* exception3.c: New test.
* Makefile: Add new tests exception2.c and exception3.c.
* GNUmakefile: Likewise.
2000-12-11 Ross Johnson <rpj@special.ise.canberra.edu.au>
* cleanup3.c: Remove unused variable.
* cleanup2.c: Likewise.
* exception1.c: Throw an exception rather than use
a deliberate zero divide so that catch(...) will
handle it under Mingw32. Mingw32 now builds the
library correctly to pass all tests - see Thomas
Pfaff's detailed instructions re needed changes
to Mingw32 in the Pthreads-Win32 FAQ.
|
