2001-08-23  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	Contributed by - "Alexander Terekhov" <TEREKHOV@de.ibm.com>

	* condvar.c (pthread_cond_destroy): fix bug with
	respect to deadlock in the case of concurrent
	_destroy/_unblock; a condition variable can be destroyed
	immediately after all the threads that are blocked on
	it are awakened.

	Contributed by - "Phil Frisbie, Jr." <phil@hawksoft.com>

	* tsd.c (pthread_getspecific): Preserve the last
	winsock error [from WSAGetLastError()].

2001-07-18  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	Contributed by - "Scott McCaskill" <scott@magruder.org>

	* mutex.c (pthread_mutexattr_init): Return ENOMEM
	immediately and don't dereference the NULL pointer
	if calloc fails.
	(pthread_mutexattr_getpshared): Don't dereference
	a pointer that is possibly NULL.
	* barrier.c (pthread_barrierattr_init): Likewise
	(pthread_barrierattr_getpshared): Don't dereference
	a pointer that is possibly NULL.
	* condvar.c (pthread_condattr_getpshared): Don't dereference
	a pointer that is possibly NULL.

2001-07-15  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* rwlock.c (pthread_rwlock_wrlock): Is allowed to be
	a cancelation point; re-enable deferred cancelability
	around the CV call.

2001-07-10  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* barrier.c: Still more revamping. The exclusive access
	mutex isn't really needed so it has been removed and replaced
	by an InterlockedDecrement(). nSerial has been removed.
	iStep is now dual-purpose. The process shared attribute
	is now stored in the barrier struct.
	* implement.h (pthread_barrier_t_): Lost some/gained one
	elements.
	* private.c (ptw32_threadStart): Removed some comments.

2001-07-10  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* barrier.c: Revamped to fix the race condition. Two alternating
	semaphores are used instead of the PulseEvent. Also improved
	overall throughput by returning PTHREAD_BARRIER_SERIAL_THREAD
	to the first waking thread.
	* implement.h (pthread_barrier_t_): Revamped.

2001-07-09  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* barrier.c: Fix several bugs in all routines. Now passes
	tests/barrier5.c which is fairly rigorous. There is still
	a non-optimal work-around for a race condition between
	the barrier breeched event signal and event wait. Basically
	the last (signalling) thread to hit the barrier yields
	to allow any other threads, which may have lost the race,
	to complete.

2001-07-07  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* barrier.c: Changed synchronisation mechanism to a
	Win32 manual reset Event and use PulseEvent to signal
	waiting threads. If the implementation continued to use
	a semaphore it would require a second semaphore and
	some management to use them alternately as barriers. A
	single semaphore allows threads to cascade from one barrier
	through the next, leaving some threads blocked at the first.
	* implement.h (pthread_barrier_t_): As per above.
	* general: Made a number of other routines inlinable.

2001-07-07  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* spin.c: Revamped and working; included static initialiser.
	Now beta level.
	* barrier.c: Likewise.
	* condvar.c: Macro constant change; inline auto init routine.
	* mutex.c: Likewise.
	* rwlock.c: Likewise.
	* private.c: Add support for spinlock initialiser.
	* global.c: Likewise.
	* implement.h: Likewise.
	* pthread.h (PTHREAD_SPINLOCK_INITIALIZER): Fix typo.

2001-07-05  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* barrier.c: Remove static initialisation - irrelevent
	for this object.
	* pthread.h (PTHREAD_BARRIER_INITIALIZER): Removed.
	* rwlock.c (pthread_rwlock_wrlock): This routine is
	not a cancelation point - disable deferred
	cancelation around call to pthread_cond_wait().

2001-07-05  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* spin.c: New module implementing spin locks.
	* barrier.c: New module implementing barriers.
	* pthread.h (_POSIX_SPIN_LOCKS): defined.
	(_POSIX_BARRIERS): Defined.
	(pthread_spin_*): Defined.
	(pthread_barrier*): Defined.
	(PTHREAD_BARRIER_SERIAL_THREAD): Defined.
	* implement.h (pthread_spinlock_t_): Defined.
	(pthread_barrier_t_): Defined.
	(pthread_barrierattr_t_): Defined.

	* mutex.c (pthread_mutex_lock): Return with the error
	if an auto-initialiser initialisation fails.

	* nonportable.c (pthread_getprocessors_np): New; gets the
	number of available processors for the current process.

2001-07-03  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* pthread.h (_POSIX_READER_WRITER_LOCKS): Define it
	if not already defined.

2001-07-01  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	Contributed by  - Alexander Terekhov.

	* condvar.c: Fixed lost signal bug reported by Timur Aydin
	(taydin@snet.net).
	[RPJ (me) didn't translate the original algorithm
	correctly.]
	* semaphore.c: Added sem_post_multiple; this is a useful
	routine, but it doesn't appear to be standard. For now it's
	not an exported function.
	
2001-06-25  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* create.c (pthread_create): Add priority inheritance
	attributes.
	* mutex.c (pthread_mutex_lock): Remove some overhead for
	PTHREAD_MUTEX_NORMAL mutex types. Specifically, avoid
	calling pthread_self() and pthread_equal() to check/set
	the mutex owner. Introduce a new pseudo owner for this
	type. Test results suggest increases in speed of up to
	90% for non-blocking locks.
	This is the default type of mutex used internally by other
	synchronising objects, ie. condition variables and
	read-write locks. The test rwlock7.c shows about a
	30-35% speed increase over snapshot 2001-06-06. The
	price of this is that the application developer
	must ensure correct behaviour, or explicitly set the
	mutex to a safer type such as PTHREAD_MUTEX_ERRORCHECK.
	For example, PTHREAD_MUTEX_NORMAL (or PTHREAD_MUTEX_DEFAULT)
	type mutexes will not return an error if a thread which is not
	the owner calls pthread_mutex_unlock. The call will succeed
	in unlocking the mutex if it is currently locked, but a
	subsequent unlock by the true owner will then fail with EPERM.
	This is however consistent with some other implementations.
	(pthread_mutex_unlock): Likewise.
	(pthread_mutex_trylock): Likewise.
	(pthread_mutex_destroy): Likewise.
	* attr.c (pthread_attr_init): PTHREAD_EXPLICIT_SCHED is the
	default inheritance attribute; THREAD_PRIORITY_NORMAL is
	the default priority for new threads.
	* sched.c (pthread_attr_setschedpolicy): Added routine.
	(pthread_attr_getschedpolicy): Added routine.
	(pthread_attr_setinheritsched): Added routine.
	(pthread_attr_getinheritsched): Added routine.
	* pthread.h (sched_rr_set_interval): Added as a macro;
	returns -1 with errno set to ENOSYS.

2001-06-23  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	*sched.c (pthread_attr_setschedparam): Add priority range
	check.
	(sched_setscheduler): New function; checks for a valid
	pid and policy; checks for permission to set information
	in the target process; expects pid to be a Win32 process ID,
	not a process handle; the only scheduler policy allowed is
	SCHED_OTHER.
	(sched_getscheduler): Likewise, but checks for permission
	to query.
	* pthread.h (SCHED_*): Moved to sched.h as defined in the
	POSIX standard.
	* sched.h (SCHED_*): Moved from pthread.h.
	(pid_t): Defined if necessary.
	(sched_setscheduler): Defined.
	(sched_getscheduler): Defined.
	* pthread.def (sched_setscheduler): Exported.
	(sched_getscheduler): Likewise.

2001-06-23  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	Contributed by -  Ralf Brese <Ralf.Brese@pdb4.siemens.de>

	* create.c (pthread_create): Set thread priority from
	thread attributes.

2001-06-18  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* Made organisational-only changes to UWIN additions.
	* dll.c (dllMain): Moved UWIN process attach code
	to pthread_win32_process_attach_np(); moved
	instance of pthread_count to global.c.
	* global.c (pthread_count): Moved from dll.c.
	* nonportable.c (pthread_win32_process_attach_np):
	Moved _UWIN code to here from dll.c.
	* implement.h (pthread_count): Define extern int.
	* create.c (pthread_count): Remove extern int.
	* private.c (pthread_count): Likewise.
	* exit.c (pthread_count): Likewise.

2001-06-18  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	Contributed by -  David Korn <dgk@research.att.com>

	* dll.c: Added changes necessary to work with UWIN.
	* create.c: Likewise.
	* pthread.h: Likewise.
	* misc.c: Likewise.
	* exit.c: Likewise.
	* private.c: Likewise.
	* implement.h: Likewise.
	There is some room at the start of struct pthread_t_
	to implement the signal semantics in UWIN's posix.dll
	although this is not yet complete.
	* Nmakefile: Compatible with UWIN's Nmake utility.
	* Nmakefile.tests: Likewise - for running the tests.

2001-06-08  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* semaphore.h (sem_t): Fixed for compile and test.
	* implement.h (sem_t_): Likewise.
	* semaphore.c: Likewise.
	* private.c (ptw32_sem_timedwait): Updated to use new
	opaque sem_t.

2001-06-06  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* semaphore.h (sem_t): Is now an opaque pointer;
	moved actual definition to implement.h.
	* implement.h (sem_t_): Move here from semaphore.h;
	was the definition of sem_t.
	* semaphore.c: Wherever necessary, changed use of sem
	from that of a pointer to a pointer-pointer; added
	extra checks for a valid sem_t; NULL sem_t when
	it is destroyed; added extra checks when creating
	and destroying sem_t elements in the NEED_SEM
	code branches; changed from using a pthread_mutex_t
	((*sem)->mutex) to CRITICAL_SECTION ((*sem)->sem_lock_cs)
	in NEED_SEM branches for access serialisation.

2001-06-06  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* mutex.c (pthread_mutexattr_init): Remove 
	ptw32_mutex_default_kind.
	
2001-06-05  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* nonportable.c (pthread_mutex_setdefaultkind_np):
	Remove - should not have been included in the first place.
	(pthread_mutex_getdefaultkind_np): Likewise.
	* global.c (ptw32_mutex_default_kind): Likewise.
	* mutex.c (pthread_mutex_init): Remove use of
	ptw32_mutex_default_kind.
	* pthread.h (pthread_mutex_setdefaultkind_np): Likewise.
	(pthread_mutex_getdefaultkind_np): Likewise.
	* pthread.def (pthread_mutexattr_setkind_np): Added.
	(pthread_mutexattr_getkind_np): Likewise.

	* README: Many changes that should have gone in before
	the last snapshot.
	* README.NONPORTABLE: New - referred to by ANNOUNCE
	but never created; documents the non-portable routines
	included in the library - moved from README with new
	routines added.
	* ANNOUNCE (pthread_mutexattr_setkind_np): Added to
	compliance list.
	(pthread_mutexattr_getkind_np): Likewise.

2001-06-04  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* condvar.c: Add original description of the algorithm as
	developed by Terekhov and Thomas, plus reference to
	README.CV.

2001-06-03  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	Contributed by  - Alexander Terekhov <TEREKHOV@de.ibm.com>
	                - Louis Thomas <lthomas@arbitrade.com>

	* condvar.c (pthread_cond_init): Completely revamped.
	(pthread_cond_destroy): Likewise.
	(ptw32_cond_wait_cleanup): Likewise.
	(ptw32_cond_timedwait): Likewise.
	(ptw32_cond_unblock): New general signaling routine.
	(pthread_cond_signal): Now calls ptw32_cond_unblock.
	(pthread_cond_broadcast): Likewise.
	* implement.h (pthread_cond_t_): Revamped.
	* README.CV: New; explanation of the above changes.

2001-05-30  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* pthread.h (rand_r): Fake using _seed argument to quell
	compiler warning (compiler should optimise this away later).

	* GNUmakefile (OPT): Leave symbolic information out of the library
	and increase optimisation level - for smaller faster prebuilt
	dlls.
	
2001-05-29  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	Contributed by  - Milan Gardian <Milan.Gardian@LEIBINGER.com>

	* Makefile: fix typo.
	* pthreads.h: Fix problems with stdcall/cdecl conventions, in particular
	remove the need for PT_STDCALL everywhere; remove warning supression.
	* (errno): Fix the longstanding "inconsistent dll linkage" problem
	with errno; now also works with /MD debugging libs - 
	warnings emerged when compiling pthreads library with /MD (or /MDd)
	compiler switch, instead of /MT (or /MTd) (i.e. when compiling pthreads
	using Multithreaded DLL CRT instead of Multithreaded statically linked
	CRT).
	* create.c (pthread_create): Likewise; fix typo.
	* private.c (ptw32_threadStart): Eliminate use of terminate() which doesn't
	throw exceptions.
	* Remove unnecessary #includes from a number of modules -
	[I had to #include malloc.h in implement.h for gcc - rpj].

2001-05-29  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	Contributed by 	- Thomas Pfaff <tpfaff@gmx.net>

	* pthread.h (PTHREAD_MUTEX_DEFAULT): New; equivalent to
	PTHREAD_MUTEX_DEFAULT_NP.
	* (PTHREAD_MUTEX_NORMAL): Similarly.
	* (PTHREAD_MUTEX_ERRORCHECK): Similarly.
	* (PTHREAD_MUTEX_RECURSIVE): Similarly.
	* (pthread_mutex_setdefaultkind_np): New; Linux compatibility stub
	for pthread_mutexattr_settype.
	* (pthread_mutexattr_getkind_np): New; Linux compatibility stub
	for pthread_mutexattr_gettype.
	* mutex.c (pthread_mutexattr_settype): New; allow
	the following types of mutex:
	  PTHREAD_MUTEX_DEFAULT_NP
	  PTHREAD_MUTEX_NORMAL_NP
	  PTHREAD_MUTEX_ERRORCHECK_NP
	  PTHREAD_MUTEX_RECURSIVE_NP
	* Note that PTHREAD_MUTEX_DEFAULT is equivalent to
	PTHREAD_MUTEX_NORMAL - ie. mutexes should no longer
	be recursive by default, and a thread will deadlock if it
	tries to relock a mutex it already owns. This is inline with
	other pthreads implementations.
	* (pthread_mutex_lock): Process the lock request
	according to the mutex type.
	* (pthread_mutex_init): Eliminate use of Win32 mutexes as the
	basis of POSIX mutexes - instead, a combination of one critical section
	and one semaphore are used in conjunction with Win32 Interlocked* routines.
	* (pthread_mutex_destroy): Likewise.
	* (pthread_mutex_lock): Likewise.
	* (pthread_mutex_trylock): Likewise.
	* (pthread_mutex_unlock): Likewise.
	* Use longjmp/setjmp to implement cancelation when building the library
	using a C compiler which doesn't support exceptions, e.g. gcc -x c (note
	that gcc -x c++ uses exceptions).
	* Also fixed some of the same typos and eliminated PT_STDCALL as
	Milan Gardian's patches above.

2001-02-07  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	Contributed by  - Alexander Terekhov <TEREKHOV@de.ibm.com>
	
	* rwlock.c: Revamped.
	* implement.h (pthread_rwlock_t_): Redefined.
	This implementation does not have reader/writer starvation problem.
	Rwlock attempts to behave more like a normal mutex with
	races and scheduling policy determining who is more important;
	It also supports recursive locking,
	has less synchronization overhead (no broadcasts at all,
	readers are not blocked on any condition variable) and seem to
	be faster than the current implementation [W98 appears to be
	approximately 15 percent faster at least - on top of speed increase
	from Thomas Pfaff's changes to mutex.c - rpj].

2000-12-29  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* Makefile: Back-out "for" loops which don't work.

	* GNUmakefile: Remove the fake.a target; add the "realclean"
	target; don't remove built libs under the "clean" target.

	* config.h: Add a guard against multiple inclusion.

	* semaphore.h: Add some defines from config.h to make
	semaphore.h independent of config.h when building apps.

	* pthread.h (_errno): Back-out previous fix until we know how to
	fix it properly.

	* implement.h (lockCount): Add missing element to pthread_mutex_t_.

	* sync.c (pthread_join): Spelling fix in comment.

	* private.c (ptw32_threadStart): Reset original termination
	function (C++).
	(ptw32_threadStart): Cleanup detached threads early in case
	the library is statically linked.
	(ptw32_callUserDestroyRoutines): Remove [SEH] __try block from
	destructor call so that unhandled exceptions will be passed through
	to the 	system; call terminate() from [C++] try block for the same
	reason.

	* tsd.c (pthread_getspecific): Add comment.

	* mutex.c (pthread_mutex_init): Initialise new elements in
	pthread_mutex_t.
	(pthread_mutex_unlock): Invert "pthread_equal()" test.

2000-12-28  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* semaphore.c (mode_t): Use ifndef HAVE_MODE_T to include definition.

	* config.h.in (HAVE_MODE_T): Added.
	(_UWIN): Start adding defines for the UWIN package.

	* private.c (ptw32_threadStart): Unhandled exceptions are
	now passed through to the system to deal with. This is consistent
	with normal Windows behaviour. C++ applications may use
	set_terminate() to override the default behaviour which is
	to call ptw32_terminate(). Ptw32_terminate() cleans up some
	POSIX thread stuff before calling the system default function
	which calls abort(). The users termination function should conform
	to standard C++ semantics which is to not return. It should
	exit the thread (call pthread_exit()) or exit the application.
	* private.c (ptw32_terminate): Added as the default set_terminate()
	function. It calls the system default function after cleaning up
	some POSIX thread stuff.

	* implement.h (ptw32_try_enter_critical_section): Move
	declaration.
	* global.c (ptw32_try_enter_critical_section): Moved
	from dll.c.
	* dll.c: Move process and thread attach/detach code into
	functions in nonportable.c.
	* nonportable.c (pthread_win32_process_attach_np): Process
	attach code from dll.c is now available to static linked
	applications.
	* nonportable.c (pthread_win32_process_detach_np): Likewise.
	* nonportable.c (pthread_win32_thread_attach_np): Likewise.
	* nonportable.c (pthread_win32_thread_detach_np): Likewise.

	* pthread.h: Add new non-portable prototypes for static
	linked applications.

	* GNUmakefile (OPT): Increase optimisation flag and remove
	debug info flag.

	* pthread.def: Add new non-portable exports for static
	linked applications.

2000-12-11  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* FAQ: Update Answer 6 re getting a fully working
	Mingw32 built library.

2000-10-10  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>
 
        * misc.c (pthread_self): Restore Win32 "last error"
        cleared by TlsGetValue() call in
        pthread_getspecific()
        - "Steven Reddie" <smr@essemer.com.au>
 
2000-09-20  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>
 
        * mutex.c (pthread_mutex_lock): Record the owner
        of the mutex. This requires also keeping count of
        recursive locks ourselves rather than leaving it
        to Win32 since we need to know when to NULL the
        thread owner when the mutex is unlocked.
        (pthread_mutex_trylock): Likewise.
        (pthread_mutex_unlock): Check that the calling
        thread owns the mutex, decrement the recursive
        lock count, and NULL the owner if zero. Return
        EPERM if the mutex is owned by another thread.
        * implement.h (pthread_mutex_t_): Add ownerThread
        and lockCount members.
        - reported by Arthur Kantor <akantor@bexusa.com>

2000-09-13  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* mutex.c (pthread_mutex_init): Call
	TryEnterCriticalSection through the pointer
	rather than directly so that the dll can load
	on Windows versions that can't resolve the
	function, eg. Windows 95
	- "Jef Gearhart" <jgearhart@tpssys.com>

2000-09-09  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* pthread.h (ctime_r): Fix arg.

2000-09-08  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* GNUmakefile(_WIN32_WINNT=0x400): Define in CFLAGS;
	doesn't seem to be needed though.

	* cancel.c (pthread_cancel): Must get "self" through
	calling pthread_self() which will ensure a POSIX thread
	struct is built for non-POSIX threads; return an error
	if this fails
	- Ollie Leahy <ollie@mpt.ie>
	(pthread_setcancelstate): Likewise.
	(pthread_setcanceltype): Likewise.
	* misc.c (ptw32_cancelable_wait): Likewise.

	* private.c (ptw32_tkAssocCreate): Remove unused #if 0
	wrapped code.

	* pthread.h (ptw32_get_exception_services_code):
	Needed to be forward declared unconditionally.

2000-09-06  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* cancel.c (pthread_cancel): If called from the main
	thread "self" would be NULL; get "self" via pthread_self()
	instead of directly from TLS so that an implicit
	pthread object is created.

	* misc.c (pthread_equal): Strengthen test for NULLs.

2000-09-02  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* condvar.c (ptw32_cond_wait_cleanup): Ensure that all
	waking threads check if they are the last, and notify
	the broadcaster if so - even if an error occurs in the
	waiter.

	* semaphore.c (_decrease_semaphore): Should be
	a call to ptw32_decrease_semaphore.
	(_increase_semaphore): Should be a call to
	ptw32_increase_semaphore.

	* misc.c (ptw32_cancelable_wait): Renamed from
	CancelableWait.
	* rwlock.c (_rwlock_check*): Renamed to
	ptw32_rwlock_check*.
	* mutex.c (_mutex_check*): Renamed to ptw32_mutex_check*.
	* condvar.c (cond_timed*): Renamed to ptw32_cond_timed*.
	(_cond_check*): Renamed to ptw32_cond_check*.
	(cond_wait_cleanup*): Rename to ptw32_cond_wait_cleanup*.
	(ptw32_cond_timedwait): Add comments.

2000-08-22  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* private.c (ptw32_throw): Fix exception test;
	move exceptionInformation declaration.

	* tsd.c (pthread_key_create): newkey wrongly declared.

	* pthread.h: Fix comment block.

2000-08-18  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* mutex.c (pthread_mutex_destroy): Check that the mutex isn't
	held; invalidate the mutex as early as possible to avoid
	contention; not perfect - FIXME!

	* rwlock.c (pthread_rwlock_init): Remove redundant assignment
	to "rw".
	(pthread_rwlock_destroy): Invalidate the rwlock before
	freeing up any of it's resources - to avoid contention.

	* private.c (ptw32_tkAssocCreate): Change assoc->lock
	to use a dynamically initialised mutex - only consumes
	a W32 mutex or critical section when first used,
	not before.

	* mutex.c (pthread_mutex_init): Remove redundant assignment
	to "mx".
	(pthread_mutexattr_destroy): Set attribute to NULL
	before freeing it's memory - to avoid contention.

	* implement.h (PTW32_EPS_CANCEL/PTW32_EPS_EXIT):
	Must be defined for all compilers - used as generic
	exception selectors by ptw32_throw().

	* Several: Fix typos from scripted edit session
	yesterday.

	* nonportable.c (pthread_mutexattr_setforcecs_np):
	Moved this function from mutex.c.
	(pthread_getw32threadhandle_np): New function to
	return the win32 thread handle that the POSIX
	thread is using.
	* mutex.c (pthread_mutexattr_setforcecs_np):
	Moved to new file "nonportable.c".

	* pthread.h (PTW32_BUILD): Only	redefine __except
	and catch compiler keywords if we aren't building
	the library (ie. PTW32_BUILD is not defined) - 
	this is safer than defining and then undefining
	if not building the library.
	* implement.h: Remove __except and catch undefines.
	* Makefile (CFLAGS): Define PTW32_BUILD.
	* GNUmakefile (CFLAGS): Define PTW32_BUILD.

	* All appropriate: Change Pthread_exception* to
	ptw32_exception* to be consistent with internal
	identifier naming.

	* private.c (ptw32_throw): New function to provide
	a generic exception throw for all internal
	exceptions and EH schemes.
	(ptw32_threadStart): pthread_exit() value is now
	returned via the thread structure exitStatus
	element.
	* exit.c (pthread_exit): pthread_exit() value is now
	returned via the thread structure exitStatus
	element.
	* cancel.c (ptw32_cancel_self): Now uses ptw32_throw.
	(pthread_setcancelstate): Ditto.
	(pthread_setcanceltype): Ditto.
	(pthread_testcancel): Ditto.
	(pthread_cancel): Ditto.
	* misc.c (CancelableWait): Ditto.
	* exit.c (pthread_exit): Ditto.
	* All applicable: Change PTW32_ prefix to
	PTW32_ prefix to remove leading underscores
	from private library identifiers.

2000-08-17  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* All applicable: Change _pthread_ prefix to
	ptw32_ prefix to remove leading underscores
	from private library identifiers (single
	and double leading underscores are reserved in the
	ANSI C standard for compiler implementations).

	* tsd.c (pthread_create_key): Initialise temporary
	key before returning it's address to avoid race
	conditions.

2000-08-13  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* errno.c: Add _MD precompile condition; thus far
	had no effect when using /MD compile option but I
	thnk it should be there.

	* exit.c: Add __cplusplus to various #if lines;
	was compiling SEH code even when VC++ had
	C++ compile options.

	* private.c: ditto.

	* create.c (pthread_create): Add PT_STDCALL macro to
	function pointer arg in _beginthread().

	* pthread.h: PT_STDCALL really does need to be defined
	in both this and impliment.h; don't set it to __cdecl
	- this macro is only used to extend function pointer
	casting for functions that will be passed as parameters.
	(~PThreadCleanup): add cast and group expression.
	(_errno): Add _MD compile conditional.
	(PtW32NoCatchWarn): Change pragma message.

	* implement.h: Move and change PT_STDCALL define.

	* need_errno.h: Add _MD to compilation conditional.

	* GNUmakefile: Substantial rewrite for new naming
	convention; set for nil optimisation (turn it up
	when we have a working library build; add target
	"fake.a" to build a libpthreadw32.a from the VC++
	built DLL pthreadVCE.dll.

	* pthread.def (LIBRARY): Don't specify in the .def
	file - it is specified on the linker command line
	since we now use the same .def file for variously
	named .dlls.

	* Makefile: Substantial rewrite for new naming
	convention; default nmake target only issues a
	help message; run nmake with specific target
	corresponding to the EH scheme being used.

	* README: Update information; add naming convention
	explanation.

	* ANNOUNCE: Update information.

2000-08-12  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* pthread.h: Add compile-time message when using
	MSC_VER compiler and C++ EH to warn application
	programmers to use PtW32Catch instead of catch(...)
	if they want cancelation and pthread_exit to work.

	* implement.h: Remove #include <semaphore.h>; we
	use our own local semaphore.h.

2000-08-10  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* cleanup.c (pthread_pop_cleanup): Remove _pthread
	prefix from __except and catch keywords; implement.h
	now simply undefines ptw32__except and
	ptw32_catch if defined; VC++ was not textually
	substituting ptw32_catch etc back to catch as
	it was redefined; the reason for using the prefixed
	version was to make it clear that it was not using
	the pthread.h redefined catch keyword.

	* private.c (ptw32_threadStart): Ditto.
	(ptw32_callUserDestroyRoutines): Ditto.

	* implement.h (ptw32__except): Remove #define.
	(ptw32_catch): Remove #define.

	* GNUmakefile (pthread.a): New target to build
	libpthread32.a from pthread.dll using dlltool.

	* buildlib.bat: Duplicate cl commands with args to
	build C++ EH version of pthread.dll; use of .bat
	files is redundant now that nmake compatible
	Makefile is included; used as a kludge only now.

	* Makefile: Localise some macros and fix up the clean:
	target to extend it and work properly.

	* CONTRIBUTORS: Add contributors.

	* ANNOUNCE: Updated.

	* README: Updated.

2000-08-06  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* pthread.h: Remove #warning - VC++ doesn't accept it.

2000-08-05  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* pthread.h (PtW32CatchAll): Add macro. When compiling
	applications using VC++ with C++ EH rather than SEH
	'PtW32CatchAll' must be used in place of any 'catch( ... )'
	if the application wants pthread cancelation or
	pthread_exit() to work.

2000-08-03  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* pthread.h: Add a base class ptw32_exception for
	library internal exceptions and change the "catch"
	re-define macro to use it.

2000-08-02  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* GNUmakefile (CFLAGS): Add -mthreads.
	Add new targets to generate cpp and asm output.

	* sync.c (pthread_join): Remove dead code.

2000-07-25  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* sched.c (sched_get_priority_max): Handle different WinCE and
	Win32 priority values together.
	(sched_get_priority_min): Ditto.
	- Tristan Savatier <tristan@mpegtv.com>

	* create.c (pthread_create): Force new threads to wait until
	pthread_create has the new thread's handle; we also retain
	a local copy of the handle for internal use until
	pthread_create returns.

	* private.c (ptw32_threadStart): Initialise ei[].
	(ptw32_threadStart): When beginthread is used to start the
	thread, force waiting until the creator thread had the 
	thread handle.

	* cancel.c (ptw32_cancel_thread): Include context switch
	code for defined(_X86_) environments in addition to _M_IX86.

	* rwlock.c (pthread_rwlock_destroy): Assignment changed
	to avoid compiler warning.

	* private.c (ptw32_get_exception_services_code): Cast
	NULL return value to avoid compiler warning.

	* cleanup.c (pthread_pop_cleanup): Initialise "cleanup" variable
	to avoid compiler warnings.

	* misc.c (ptw32_new): Change "new" variable to "t" to avoid
	confusion with the C++ keyword of the same name.

	* condvar.c (cond_wait_cleanup): Initialise lastWaiter variable.
	(cond_timedwait): Remove unused local variables. to avoid
	compiler warnings.

	* dll.c (dllMain): Remove 2000-07-21 change - problem
	appears to be in pthread_create().

2000-07-22  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* tsd.c (pthread_key_create): If a destructor was given
	and the pthread_mutex_init failed, then would try to
	reference a NULL pointer (*key); eliminate this section of
	code by using a dynamically initialised mutex
	(PTHREAD_MUTEX_INITIALIZER).

	* tsd.c (pthread_setspecific): Return an error if
	unable to set the value; simplify cryptic conditional.

	* tsd.c (pthread_key_delete): Locking threadsLock relied
	on mutex_lock returning an error if the key has no destructor.
	ThreadsLock is only initialised if the key has a destructor.
	Making this mutex a static could reduce the number of mutexes
	used by an application since it is actually created only at
	first use and it's often destroyed soon after.
	
2000-07-22  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* FAQ: Added Q5 and Q6.

2000-07-21  Ross Johnson  <rpj@setup1.ise.canberra.edu.au>

	* create.c (pthread_create): Set threadH to 0 (zero)
	everywhere. Some assignments were using NULL. Maybe
	it should be NULL everywhere - need to check. (I know
	they are nearly always the same thing - but not by
	definition.)

	* dll.c: Include resource leakage work-around. This is a
	partial FIXME which doesn't stop all leakage. The real
	problem needs to be found and fixed.
	- "David Baggett" <dmb@itasoftware.com>

	* misc.c (pthread_self): Try to catch NULL thread handles
	at the point where they might be generated, even though
	they should always be valid at this point.

	* tsd.c (pthread_setspecific): return an error value if
	pthread_self() returns NULL.

	* sync.c (pthread_join): return an error value if
	pthread_self() returns NULL.

	* signal.c (pthread_sigmask): return an error value if
	pthread_self() returns NULL.

2000-03-02  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* attr.c (pthread_attr_init): Set default stacksize to zero (0)
	rather than PTHREAD_STACK_MIN even though these are now the same.

	* pthread.h (PTHREAD_STACK_MIN): Lowered to 0.

2000-01-28  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* mutex.c (pthread_mutex_init): Free mutex if it has been alloced;
	if critical sections can be used instead of Win32 mutexes, test
	that the critical section works and return an error if not.

2000-01-07  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* cleanup.c (pthread_pop_cleanup): Include SEH code only if MSC is not
	compiling as C++.
	(pthread_push_cleanup): Include SEH code only if MSC is not
	compiling as C++.

	* pthread.h: Include SEH code only if MSC is not
	compiling as C++.

	* implement.h: Include SEH code only if MSC is not
	compiling as C++.

	* cancel.c (ptw32_cancel_thread): Add _M_IX86 check.
	(pthread_testcancel): Include SEH code only if MSC is not
	compiling as C++.
	(ptw32_cancel_self): Include SEH code only if MSC is not
	compiling as C++.

2000-01-06  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* Makefile: Remove inconsistencies in 'cl' args
	- Erik Hensema <erik.hensema@group2000.nl>

2000-01-04  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* private.c (ptw32_get_exception_services_code): New; returns
	value of EXCEPTION_PTW32_SERVICES.
	(ptw32_processInitialize): Remove initialisation of
	ptw32_exception_services which is no longer needed.

	* pthread.h (ptw32_exception_services): Remove extern.
	(ptw32_get_exception_services_code): Add function prototype;
	use this to return EXCEPTION_PTW32_SERVICES value instead of
	using the ptw32_exception_services variable which I had
	trouble exporting through pthread.def.

	* global.c (ptw32_exception_services): Remove declaration.

1999-11-22  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* implement.h: Forward declare ptw32_new();

	* misc.c (ptw32_new): New; alloc and initialise a new pthread_t.
	(pthread_self): New thread struct is generated 	by new routine
	ptw32_new().

	* create.c (pthread_create): New thread struct is generated
	by new routine ptw32_new().

1999-11-21  Ross Johnson  <rpj@special.ise.canberra.edu.au>

	* global.c (ptw32_exception_services): Declare new variable. 

	* private.c (ptw32_threadStart): Destroy thread's
	cancelLock mutex; make 'catch' and '__except' usageimmune to
	redfinitions in pthread.h.
	(ptw32_processInitialize): Init new constant ptw32_exception_services.

	* create.c (pthread_create): Initialise thread's cancelLock
	mutex.

	* cleanup.c (pthread_pop_cleanup): Make 'catch' and '__except'
	usage immune to redfinition s in pthread.h.

	* private.c: Ditto.

	* pthread.h (catch): Redefine 'catch' so that C++ applications
	won't catch our internal exceptions.
	(__except): ditto for __except.

	* implement.h (ptw32_catch): Define internal version
	of 'catch' because 'catch' is redefined by pthread.h.
	(__except): ditto for __except.
	(struct pthread_t_): Add cancelLock mutex for async cancel
	safety.

	* cancel.c (ptw32_cancel_self): New; part of the async
	cancellation implementation.
	(ptw32_cancel_thread): Ditto; this function is X86
	processor specific.
	(pthread_setcancelstate): Add check for pending async
	cancel request and cancel the calling thread if
	required; add async-cancel safety lock.
	(pthread_setcanceltype): Ditto.
	- Jason Nye <jnye@nbnet.nb.ca>
	- Erik Hensema <erik.hensema@group2000.nl>

1999-11-13  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* configure.in (AC_OUTPUT): Put generated output into GNUmakefile
	rather than Makefile. Makefile will become the MSC nmake compatible
	version
	- Erik Hensema <erik.hensema@group2000.nl>

	* misc.c (pthread_self): Add a note about GetCurrentThread
	returning a pseudo-handle
	- John Bossom (John.Bossom@cognos.com>

1999-11-10  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* dll.c (dllMain): Free kernel32 ASAP.
	If TryEnterCriticalSection is not being used, then free
	the kernel32.dll handle now, rather than leaving it until
	DLL_PROCESS_DETACH.

	Note: this is not a pedantic exercise in freeing unused
	resources!  It is a work-around for a bug in Windows 95
	(see microsoft knowledge base article, Q187684) which
	does Bad Things when FreeLibrary is called within
	the DLL_PROCESS_DETACH code, in certain situations.
	Since w95 just happens to be a platform which does not
	provide TryEnterCriticalSection, the bug will be
	effortlessly avoided.
	- Todd Owen <towen@lucidcalm.dropbear.id.au>

	* sync.c (pthread_join): Make it a deferred cancelation point.

	* misc.c (pthread_self): Explicitly initialise implicitly
	created thread state to default values.

1999-11-05  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (winsock.h): Include unconditionally.
	(ETIMEDOUT): Change fallback value to that defined by winsock.h.
	
	* general: Patched for portability to WinCE. The details are
	described in the file WinCE-PORT. Follow the instructions
	in README.WinCE to make the appropriate changes in config.h.
	- Tristan Savatier <tristan@mpegtv.com>

1999-10-30  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* create.c (pthread_create): Explicitly initialise thread state to
	default values.

	* cancel.c (pthread_setcancelstate): Check for NULL 'oldstate'
	for compatibility with Solaris pthreads;
	(pthread_setcanceltype): ditto:
	- Erik Hensema <erik.hensema@group2000.nl>

1999-10-23  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (ctime_r): Fix incorrect argument "_tm"
	- Erik Hensema <erik.hensema@group2000.nl>

1999-10-21  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (_POSIX_THREADS): Only define it if it isn't
	already defined. Projects may need to define this on
	the CC command line under Win32 as it doesn't have unistd.h
	- Aurelio Medina <aureliom@crt.com>

1999-10-17  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* rwlock.c (pthread_rwlock_destroy): Add cast to remove compile
	warning.

	* condvar.c (pthread_cond_broadcast): Only release semaphores
	if there are waiting threads.

1999-10-15  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* condvar.c (cond_wait_cleanup): New static cleanup handler for
	cond_timedwait;
	(cond_timedwait): pthread_cleanup_push args changed;
	canceling a thread while it's in pthread_cond_wait
	will now decrement the waiters count and cleanup if it's the
	last waiter.
	- Lorin Hochstein <lmh@xiphos.ca> and 
	  Peter Slacik <Peter.Slacik@tatramed.sk>;
	the last waiter will now reset the CV's wasBroadcast flag
	- Graham Dumpleton <Graham.Dumpleton@ra.pad.otc.telstra.com.au>.

Thu Sep 16 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* rwlock.c (pthread_rwlock_destroy): Add serialisation.
	(_rwlock_check_need_init): Check for detroyed rwlock.
	* rwlock.c: Check return codes from _rwlock_check_need_init();
	modify comments; serialise access to rwlock objects during
	operations; rename rw_mutex to rw_lock.
	* implement.h: Rename rw_mutex to rw_lock.
	* mutex.c (pthread_mutex_destroy): Add serialisation.
	(_mutex_check_need_init): Check for detroyed mutex.
	* condvar.c (pthread_cond_destroy): Add serialisation.
	(_cond_check_need_init): Check for detroyed condvar.
	* mutex.c: Modify comments.
	* condvar.c: Modify comments.

Sat Sep 10 12:56:13 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	The following code for POSIX read/write locks was contributed
	by Aurelio Medina.

	* implement.h (pthread_rwlock_t_): Add.
	* pthread.h (pthread_rwlock_t): Add.
	(PTHREAD_RWLOCK_INITIALIZER): Add.
	Add rwlock function prototypes.
	* rwlock.c: New module.
	* pthread.def: Add new rwlock functions.
	* private.c (ptw32_processInitialize): initialise
	ptw32_rwlock_test_init_lock critical section.
	* global.c (ptw32_rwlock_test_init_lock): Add.

	* mutex.c (pthread_mutex_destroy): Don't free mutex memory
	if mutex is PTHREAD_MUTEX_INITIALIZER and has not been
	initialised yet.

Wed Sep  8 12:56:13 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* mutex.c (pthread_mutex_destroy): Free mutex memory.
	- Milan Gardian <mg@tatramed.sk>

1999-08-22  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* exit.c (pthread_exit): Fix reference to potentially
	uninitialised pointer.

1999-08-21  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c (ptw32_threadStart): Apply fix of 1999-08-19
	this time to C++ and non-trapped C versions. Ommitted to
	do this the first time through.

1999-08-19  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c (ptw32_threadStart): Return exit status from
	the application thread startup routine.
	- Milan Gardian <mg@tatramed.sk>

1999-08-18  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* exit.c (pthread_exit): Put status into pthread_t->exitStatus
	- John Bossom <john.Bossom@cognos.com>
	* private.c (ptw32_threadStart): Set pthread->exitStatus
	on exit of try{} block.
	- John Bossom <john.Bossom@cognos.com>
	* sync.c (pthread_join): use pthread_exitStatus value if the
	thread exit doesn't return a value (for Mingw32 CRTDLL
	which uses endthread instead of _endthreadex).
	- John Bossom <john.Bossom@cognos.com>

Tue Aug 17 20:17:58 CDT 1999  Mumit Khan  <khan@xraylith.wisc.edu>

        * create.c (pthread_create): Add CRTDLL suppport.
        * exit.c (pthread_exit): Likewise.
        * private.c (ptw32_threadStart): Likewise.
        (ptw32_threadDestroy): Likewise.
        * sync.c (pthread_join): Likewise.
        * tests/join1.c (main): Warn about partial support for CRTDLL.

Tue Aug 17 20:00:08 1999  Mumit Khan  <khan@xraylith.wisc.edu>

        * Makefile.in (LD): Delete entry point.
        * acconfig.h (STDCALL): Delete unused macro.
        * configure.in: Remove test for STDCALL.
        * config.h.in: Regenerate.
        * errno.c (_errno): Fix self type.
        * pthread.h (PT_STDCALL): Move from here to
        * implement.h (PT_STDCALL): here.
        (ptw32_threadStart): Fix prototype.
        * private.c (ptw32_threadStart): Likewise.

1999-08-14  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* exit.c (pthread_exit): Don't call pthread_self() but
	get thread handle directly from TSD for efficiency.
	
1999-08-12  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c (ptw32_threadStart): ei[] only declared if _MSC_VER.

	* exit.c (pthread_exit): Check for implicitly created threads
	to avoid raising an unhandled exception.
	
1999-07-12  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* condvar.c (pthread_cond_destroy): Add critical section.
	(cond_timedwait): Add critical section; check for timeout
	waiting on semaphore.
	(pthread_cond_broadcast): Add critical section.
	- Peter Slacik <Peter.Slacik@tatramed.sk>

1999-07-09  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	The following changes fix a bug identified by
	Lorin Hochstein <lmh@xiphos.ca> and solved by
	John Bossom <John.Bossom@Cognos.COM>.

	The problem was that cleanup handlers were not executed when
	pthread_exit() was called.

	* implement.h (pthread_t_): Add exceptionInformation element for
	C++ per-thread exception information.
	(general): Define and rename exceptions.


	* misc.c (CancelableWait):  PTW32_EPS_CANCEL (SEH) and
	ptw32_exception_cancel (C++) used to identify the exception.

	* cancel.c (pthread_testcancel): PTW32_EPS_CANCEL (SEH) and
	ptw32_exception_cancel (C++) used to identify the exception.

	* exit.c (pthread_exit): throw/raise an exception to return to
	ptw32_threadStart() to exit the thread. PTW32_EPS_EXIT (SEH)
	and ptw32_exception_exit (C++) used to identify the exception.

	* private.c (ptw32_threadStart): Add pthread_exit exception trap;
	clean up and exit the thread directly rather than via pthread_exit().

Sun May 30 00:25:02 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* semaphore.h (mode_t): Conditionally typedef it.

Fri May 28 13:33:05 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* condvar.c (pthread_cond_broadcast): Fix possible memory fault
	- Mark E. Armstrong <avail@pacbell.net>
	
Thu May 27 13:08:46 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* condvar.c (pthread_cond_broadcast): Fix logic bug
	- Peter Slacik <Peter.Slacik@tatramed.sk>;
	optimise sem_post loop
	- Bossom, John <John.Bossom@Cognos.COM>.

Fri May 14 12:13:18 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* attr.c (pthread_attr_setdetachstate): Fix logic bug
	- Mike Russo <miker@eai.com>.

Sat May  8 09:42:30 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.def (sem_open): Add.
	(sem_close): Add.
	(sem_unlink): Add.
	(sem_getvalue): Add.

	* FAQ (Question 3): Add.

Thu Apr  8 01:16:23 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* semaphore.c (sem_open): New function; returns an error (ENOSYS).
	(sem_close): ditto.
	(sem_unlink): ditto.
	(sem_getvalue): ditto.

	* semaphore.h (_POSIX_SEMAPHORES): define.
	
Wed Apr  7 14:09:52 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* errno.c (_REENTRANT || _MT): Invert condition.

	* pthread.h (_errno): Conditionally include prototype.

Wed Apr  7 09:37:00 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* *.c (comments): Remove individual attributions - these are
	documented sufficiently elsewhere.

	* implement.h (pthread.h): Remove extraneous include.

Sun Apr  4 11:05:57 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* sched.c (sched.h): Include.

	* sched.h: New file for POSIX 1b scheduling.

	* pthread.h: Move opaque structures to implement.h; move sched_*
	prototypes out and into sched.h.

	* implement.h: Add opaque structures from pthread.h.

	* sched.c (sched_yield): New function.

	* condvar.c (ptw32_sem_*): Rename to sem_*; except for
	ptw32_sem_timedwait which is an private function.

Sat Apr  3 23:28:00 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* Makefile.in (OBJS): Add errno.o.

Fri Apr  2 11:08:50 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h (ptw32_sem_*): Remove prototypes now defined in
	semaphore.h.

	* pthread.h (sempahore.h): Include.

	* semaphore.h: New file for POSIX 1b semaphores.

	* pthread.h (ptw32_sem_t): Change to sem_t. 

	* semaphore.c (ptw32_sem_*): Change to sem_*; these functions
	will be exported from the library; set errno on error.
	- John Bossom <jebossom@cognos.com>
	(ptw32_sem_timedwait): Moved to private.c.

	* private.c (ptw32_sem_timedwait): Moved from semaphore.c;
	set errno on error.

	* errno.c (_errno): New file. New function.
	- John Bossom

	* pthread.h (pthread_t_): Add per-thread errno element.

Fri Mar 26 14:11:45 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* semaphore.c (ptw32_sem_timedwait): Check for negative
	milliseconds.
	- Tor Lillqvist <tml@iki.fi>

Wed Mar 24 11:32:07 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* misc.c (CancelableWait): Initialise exceptionInformation[2].
	(pthread_self): Get a real Win32 thread handle for implicit threads.
	- John Bossom <jebossom@cognos.com>

	* cancel.c (pthread_testcancel): Initialise exceptionInformation[2].
	- John Bossom <jebossom@cognos.com>

	* implement.h (SE_INFORMATION): Fix values.
	- John Bossom <jebossom@cognos.com>

	* private.c (ptw32_threadDestroy): Close the thread handle.
	- John Bossom <jebossom@cognos.com>

Fri Mar 19 12:57:27 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* cancel.c (comments): Update and cleanup.

Fri Mar 19 09:12:59 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c (ptw32_threadStart): status returns PTHREAD_CANCELED.

	* pthread.h (PTHREAD_CANCELED): defined.

Tue Mar 16  1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* all: Add GNU LGPL and Copyright and Warranty.
	
Mon Mar 15 00:20:13 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* condvar.c (pthread_cond_init): fix possible uninitialised use
	of cv.

Sun Mar 14 21:01:59 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* condvar.c (pthread_cond_destroy): don't do full cleanup if
	static initialised cv has never been used.
	(cond_timedwait): check result of auto-initialisation.

Thu Mar 11 09:01:48 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (pthread_mutex_t): revert to (pthread_mutex_t *);
	define a value to serve as PTHREAD_MUTEX_INITIALIZER.
	(pthread_mutex_t_): remove staticinit and valid elements.
	(pthread_cond_t): revert to (pthread_cond_t_ *);
	define a value to serve as PTHREAD_COND_INITIALIZER.
	(pthread_cond_t_): remove staticinit and valid elements.

	* mutex.c (pthread_mutex_t args): adjust indirection of references.
	(all functions): check for PTHREAD_MUTEX_INITIALIZER value;
	check for NULL (invalid).

	* condvar.c (pthread_cond_t args): adjust indirection of references.
	(all functions): check for PTHREAD_COND_INITIALIZER value;
	check for NULL (invalid).

Wed Mar 10 17:18:12 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* misc.c (CancelableWait): Undo changes from Mar 8 and 7.

Mon Mar  8 11:18:59 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* misc.c (CancelableWait): Ensure cancelEvent handle is the lowest
	indexed element in the handles array. Enhance test for abandoned
	objects.

	* pthread.h (PTHREAD_MUTEX_INITIALIZER): Trailing elements not
	initialised are set to zero by the compiler. This avoids the
	problem of initialising the opaque critical section element in it.
	(PTHREAD_COND_INITIALIZER): Ditto.

	* semaphore.c (ptw32_sem_timedwait): Check sem == NULL earlier.

Sun Mar  7 12:31:14 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* condvar.c (pthread_cond_init): set semaphore initial value
	to 0, not 1. cond_timedwait was returning signaled immediately.

	* misc.c (CancelableWait): Place the cancel event handle first
	in the handle table for WaitForMultipleObjects. This ensures that
	the cancel event is recognised and acted apon if both objects
	happen to be signaled together.

	* private.c (ptw32_cond_test_init_lock): Initialise and destroy.

	* implement.h (ptw32_cond_test_init_lock): Add extern.

	* global.c (ptw32_cond_test_init_lock): Add declaration. 

	* condvar.c (pthread_cond_destroy): check for valid initialised CV;
	flag destroyed CVs as invalid.
	(pthread_cond_init): pthread_cond_t is no longer just a pointer.
	This is because PTHREAD_COND_INITIALIZER needs state info to reside
	in pthread_cond_t so that it can initialise on first use. Will work on
	making pthread_cond_t (and other objects like it) opaque again, if
	possible, later.
	(cond_timedwait): add check for statically initialisation of
	CV; initialise on first use.
	(pthread_cond_signal): check for valid CV.
	(pthread_cond_broadcast): check for valid CV.
	(_cond_check_need_init): Add.

	* pthread.h (PTHREAD_COND_INITIALIZER): Fix.
	(pthread_cond_t): no longer a pointer to pthread_cond_t_.
	(pthread_cond_t_): add 'staticinit' and 'valid' elements.

Sat Mar 6 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h: Undate comments.

Sun Feb 21 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (PTHREAD_MUTEX_INITIALIZER): missing braces around
	cs element initialiser.

1999-02-21  Ben Elliston  <bje@cygnus.com>

	* pthread.h (pthread_exit): The return type of this function is
	void, not int.

	* exit.c (pthread_exit): Do not return 0.

Sat Feb 20 16:03:30 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* dll.c (DLLMain): Expand TryEnterCriticalSection support test.

	* mutex.c (pthread_mutex_trylock): The check for
	ptw32_try_enter_critical_section == NULL should have been
	removed long ago.

Fri Feb 19 16:03:30 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* sync.c (pthread_join): Fix pthread_equal() test.

	* mutex.c (pthread_mutex_trylock): Check mutex != NULL before
	using it.

Thu Feb 18 16:17:30 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* misc.c (pthread_equal): Fix inverted result.

	* Makefile.in: Use libpthread32.a as the name of the DLL export
	library instead of pthread.lib.

	* condvar.c (pthread_cond_init): cv could have been used unitialised;
	initialise.

	* create.c (pthread_create): parms could have been used unitialised;
	initialise.

	* pthread.h (struct pthread_once_t_): Remove redefinition.

Sat Feb 13 03:03:30 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (struct pthread_once_t_): Replaced.

	* misc.c (pthread_once): Replace with John Bossom's version;
	has lighter weight serialisation; fixes problem of not holding
	competing threads until after the init_routine completes.

Thu Feb 11 13:34:14 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* misc.c (CancelableWait): Change C++ exception throw.

	* sync.c (pthread_join): Change FIXME comment - issue resolved.

Wed Feb 10 12:49:11 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* configure: Various temporary changes.
	- Kevin Ruland <Kevin.Ruland@anheuser-busch.com>

	* README: Update.

	* pthread.def (pthread_attr_getstackaddr): uncomment
	(pthread_attr_setstackaddr): uncomment

Fri Feb  5 13:42:30 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* semaphore.c: Comment format changes.

Thu Feb  4 10:07:28 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* global.c: Remove ptw32_exception instantiation.

	* cancel.c (pthread_testcancel): Change C++ exception throw.

	* implement.h: Remove extern declaration.

Wed Feb  3 13:04:44 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* cleanup.c: Rename ptw32_*_cleanup() to pthread_*_cleanup().

	* pthread.def: Ditto.
	
	* pthread.h: Ditto.

	* pthread.def (pthread_cleanup_push): Remove from export list;
	the function is defined as a macro under all compilers.
	(pthread_cleanup_pop): Ditto.

	* pthread.h: Remove #if defined().

Wed Feb  3 10:13:48 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* sync.c (pthread_join): Check for NULL value_ptr arg;
	check for detached threads.

Tue Feb  2 18:07:43 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* implement.h: Add #include <pthread.h>.
	Change sem_t to ptw32_sem_t.

	Various patches by Kevin Ruland <Kevin.Ruland@anheuser-busch.com>

	* signal.c (pthread_sigmask): Add and modify casts.
	Reverse LHS/RHS bitwise assignments.

	* pthread.h: Remove #include <semaphore.h>.
	(PTW32_ATTR_VALID): Add cast.
	(struct pthread_t_): Add sigmask element.

	* dll.c: Add "extern C" for DLLMain.
	(DllMain): Add cast.

	* create.c (pthread_create): Set sigmask in thread.

	* condvar.c: Remove #include. Change sem_* to ptw32_sem_*.

	* attr.c: Changed #include.

	* Makefile.in: Additional targets and changes to build the library
	as a DLL.

Fri Jan 29 11:56:28 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* Makefile.in (OBJS): Add semaphore.o to list.

	* semaphore.c (ptw32_sem_timedwait): Move from private.c.
	Rename sem_* to ptw32_sem_*.

	* pthread.h (pthread_cond_t): Change type of sem_t.
	_POSIX_SEMAPHORES no longer defined.

	* semaphore.h: Contents moved to implement.h.
	Removed from source tree.

	* implement.h: Add semaphore function prototypes and rename all
	functions to prepend 'ptw32_'. They are
	now private to the pthreads-win32 implementation.

	* private.c: Change #warning.
	Move ptw32_sem_timedwait() to semaphore.c.

	* cleanup.c: Change #warning.

	* misc.c: Remove #include <errno.h>

	* pthread.def: Cleanup CVS merge conflicts.

	* global.c: Ditto.

	* ChangeLog: Ditto.

	* cleanup.c: Ditto.

Sun Jan 24 01:34:52 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* semaphore.c (sem_wait): Remove second arg to 
	pthreadCancelableWait() call.

Sat Jan 23 17:36:40 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.def: Add new functions to export list.

	* pthread.h (PTHREAD_MUTEX_AUTO_CS_NP): New.
	(PTHREAD_MUTEX_FORCE_CS_NP): New.

	* README: Updated.

Fri Jan 22 14:31:59 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* Makefile.in (CFLAGS): Remove -fhandle-exceptions. Not needed
	with egcs. Add -g for debugging.

	* create.c (pthread_create): Replace __stdcall with PT_STDCALL
	macro. This is a hack and must be fixed.

	* misc.c (CancelableWait): Remove redundant statement.

	* mutex.c (pthread_mutexattr_init): Cast calloc return value.

	* misc.c (CancelableWait): Add cast.
	(pthread_self): Add cast.

	* exit.c (pthread_exit): Add cast.

	* condvar.c (pthread_condattr_init): Cast calloc return value.

	* cleanup.c: Reorganise conditional compilation.

	* attr.c (pthread_attr_init): Remove unused 'result'.
	Cast malloc return value.

	* private.c (ptw32_callUserDestroyRoutines): Redo conditional
	compilation.

	* misc.c (CancelableWait): C++ version uses 'throw'.

	* cancel.c (pthread_testcancel): Ditto.

	* implement.h (class ptw32_exception): Define for C++.

	* pthread.h: Fix C, C++, and Win32 SEH condition compilation
	mayhem around pthread_cleanup_* defines. C++ version now uses John
	Bossom's cleanup handlers.
	(pthread_attr_t): Make 'valid' unsigned.
	Define '_timeb' as 'timeb' for Ming32.
	Define PT_STDCALL as nothing for Mingw32. May be temporary.

	* cancel.c (pthread_testcancel): Cast return value.

Wed Jan 20 09:31:28 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (pthread_mutexattr_t): Changed to a pointer.

	* mutex.c (pthread_mutex_init): Conditionally create Win32 mutex
	- from John Bossom's implementation.
	(pthread_mutex_destroy): Conditionally close Win32 mutex
	- from John Bossom's implementation.
	(pthread_mutexattr_init): Replaced by John Bossom's version.
	(pthread_mutexattr_destroy): Ditto.
	(pthread_mutexattr_getpshared): New function from John Bossom's
	implementation.
	(pthread_mutexattr_setpshared): New function from John Bossom's
	implementation.

Tue Jan 19 18:27:42 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* pthread.h (pthreadCancelableTimedWait): New prototype.
	(pthreadCancelableWait): Remove second argument.

	* misc.c (CancelableWait): New static function is 
	pthreadCancelableWait() renamed.
	(pthreadCancelableWait): Now just calls CancelableWait() with
	INFINITE timeout.
	(pthreadCancelableTimedWait): Just calls CancelableWait()
	with passed in timeout.

	* private.c (ptw32_sem_timedwait): 'abstime' arg really is
	absolute time. Calculate relative time to wait from current
	time before passing timeout to new routine 
	pthreadCancelableTimedWait().
	- Scott Lightner <scott@curriculum.com>

Tue Jan 19 10:27:39 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (pthread_mutexattr_setforcecs_np): New prototype.
	
	* mutex.c (pthread_mutexattr_init): Init 'pshared' and 'forcecs'
	attributes to 0.
	(pthread_mutexattr_setforcecs_np): New function (not portable).

	* pthread.h (pthread_mutex_t): 
	Add 'mutex' element. Set to NULL in PTHREAD_MUTEX_INITIALIZER.
	The pthread_mutex_*() routines will try to optimise performance
	by choosing either mutexes or critical sections as the basis
	for pthread mutexes for each indevidual mutex.
	(pthread_mutexattr_t_): Add 'forcecs' element.
	Some applications may choose to force use of critical sections
	if they know that:-
	     the mutex is PROCESS_PRIVATE and, 
	         either the OS supports TryEnterCriticalSection() or
	         pthread_mutex_trylock() will never be called on the mutex.
	This attribute will be setable via a non-portable routine.

	Note: We don't yet support PROCESS_SHARED mutexes, so the
	implementation as it stands will default to Win32 mutexes only if
	the OS doesn't support TryEnterCriticalSection. On Win9x, and early
	versions of NT 'forcecs' will need to be set in order to get
	critical section based mutexes.

Sun Jan 17 12:01:26 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (PTHREAD_MUTEX_INITIALIZER): Init new 'staticinit'
	value to '1' and existing 'valid' value to '1'.

	* global.c (ptw32_mutex_test_init_lock): Add.

	* implement.h (ptw32_mutex_test_init_lock.): Add extern.

	* private.c (ptw32_processInitialize): Init critical section for
	global lock used by _mutex_check_need_init().
	(ptw32_processTerminate): Ditto (:s/Init/Destroy/).

	* dll.c (dllMain): Move call to FreeLibrary() so that it is only
	called once when the process detaches.

	* mutex.c (_mutex_check_need_init): New static function to test
	and init PTHREAD_MUTEX_INITIALIZER mutexes. Provides serialised
	access to the internal state of the uninitialised static mutex. 
	Called from pthread_mutex_trylock() and pthread_mutex_lock() which
	do a quick unguarded test to check if _mutex_check_need_init()
	needs to be called. This is safe as the test is conservative
 	and is repeated inside the guarded section of 
	_mutex_check_need_init(). Thus in all calls except the first
	calls to lock static mutexes, the additional overhead to lock any
	mutex is a single memory fetch and test for zero.

	* pthread.h (pthread_mutex_t_): Add 'staticinit' member. Mutexes
	initialised by PTHREAD_MUTEX_INITIALIZER aren't really initialised
	until the first attempt to lock it. Using the 'valid'
	flag (which flags the mutex as destroyed or not) to record this
	information would be messy. It is possible for a statically
	initialised mutex such as this to be destroyed before ever being
	used.

	* mutex.c (pthread_mutex_trylock): Call _mutex_check_need_init()
	to test/init PTHREAD_MUTEX_INITIALIZER mutexes.
	(pthread_mutex_lock): Ditto.
	(pthread_mutex_unlock): Add check to ensure we don't try to unlock
	an unitialised static mutex.
	(pthread_mutex_destroy): Add check to ensure we don't try to delete
	a critical section that we never created. Allows us to destroy
	a static mutex that has never been locked (and hence initialised).
	(pthread_mutex_init): Set 'staticinit' flag to 0 for the new mutex.

Sun Jan 17 12:01:26 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c (ptw32_sem_timedwait): Move from semaphore.c.

	* semaphore.c : Remove redundant #includes.
	(ptw32_sem_timedwait): Move to private.c.
	(sem_wait): Add missing abstime arg to pthreadCancelableWait() call.

Fri Jan 15 23:38:05 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* condvar.c (cond_timedwait): Remove comment.

Fri Jan 15 15:41:28 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* pthread.h: Add new 'abstime' arg to pthreadCancelableWait()
	prototype.

	* condvar.c (cond_timedwait): New generalised function called by
	both pthread_cond_wait() and pthread_cond_timedwait(). This is
	essentially pthread_cond_wait() renamed and modified to add the
	'abstime' arg and call the new ptw32_sem_timedwait() instead of
	sem_wait().
	(pthread_cond_wait): Now just calls the internal static
	function cond_timedwait() with an INFINITE wait.
	(pthread_cond_timedwait): Now implemented. Calls the internal
	static function cond_timedwait().

	* implement.h (ptw32_sem_timedwait): New internal function
	prototype.

	* misc.c (pthreadCancelableWait): Added new 'abstime' argument
	to allow shorter than INFINITE wait.

	* semaphore.c (ptw32_sem_timedwait): New function for internal
	use.  This is essentially sem_wait() modified to add the
        'abstime' arg and call the modified (see above)
        pthreadCancelableWait().

Thu Jan 14 14:27:13 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* cleanup.c: Correct _cplusplus to __cplusplus wherever used.

	* Makefile.in: Add CC=g++ and add -fhandle-exceptions to CFLAGS.
	The derived Makefile will compile all units of the package as C++
	so that those which include try/catch exception handling should work
	properly. The package should compile ok if CC=gcc, however, exception
	handling will not be included and thus thread cancellation, for
 	example, will not work.

	* cleanup.c (ptw32_pop_cleanup): Add #warning to compile this
 	file as C++ if using a cygwin32 environment. Perhaps the whole package
	should be compiled using g++ under cygwin.

	* private.c (ptw32_threadStart): Change #error directive
	into #warning and bracket for __CYGWIN__ and derivative compilers.

Wed Jan 13 09:34:52 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* build.bat: Delete old binaries before compiling/linking.

Tue Jan 12 09:58:38 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* dll.c: The Microsoft compiler pragmas probably are more
	appropriately protected by _MSC_VER than by _WIN32.
	- Tor Lillqvist <tml@iki.fi>.

	* condvar.c (pthread_cond_timedwait): Fix function description
	comments.

	* pthread.h: Define ETIMEDOUT. This should be returned by
	pthread_cond_timedwait which is not implemented yet as of
	snapshot-1999-01-04-1305. It was implemented in the older version.
	The Microsoft compiler pragmas probably are more appropriately
	protected by _MSC_VER than by _WIN32.
	- Tor Lillqvist <tml@iki.fi>.

	* pthread.def: pthread_mutex_destroy was missing from the def file
	- Tor Lillqvist <tml@iki.fi>.

	* condvar.c (pthread_cond_broadcast): Ensure we only wait on threads
	if there were any waiting on the condition.
	I think pthread_cond_broadcast should do the WaitForSingleObject
	only if cv->waiters > 0? Otherwise it seems to hang, at least in the
	testg thread program from glib.
	- Tor Lillqvist <tml@iki.fi>. 

	* semaphore.c (sem_post): Correct typo in comment.

Mon Jan 11 20:33:19 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h: Re-arrange conditional compile of pthread_cleanup-*
	macros.

	* cleanup.c (ptw32_push_cleanup): Provide conditional 
	compile of cleanup->prev.

1999-01-11  Ben Elliston  <bje@cygnus.com>

	* condvar.c (pthread_cond_init): Invert logic when testing the
	return value from calloc().
	- Tor Lillqvist <tml@iki.fi>.

Sat Jan  9 14:32:08 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h: Compile-time switch for CYGWIN derived environments
	to use CreateThread instead of _beginthreadex. Ditto for ExitThread.
	Patch provided by Anders Norlander  <anorland@hem2.passagen.se>.

Tue Jan  5 16:33:04 1999  Ross Johnson  <rpj@swan.canberra.edu.au>

	* cleanup.c (ptw32_pop_cleanup): Add C++ version of __try/__except
	block. Move trailing "}" out of #ifdef _WIN32 block left there by
	(rpj's) mistake.

	* private.c: Remove #include <errno.h> which is included by pthread.h.

1998-12-11  Ben Elliston  <bje@toilet.to.cygnus.com>

	* README: Update info about subscribing to the mailing list.

Mon Jan  4 11:23:40 1999  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* all: No code changes, just cleanup.
	- remove #if 0 /* Pre Bossom */ enclosed code.
	- Remove some redundant #includes.
	* pthread.h: Update implemented/unimplemented routines list.
	* Tag the bossom merge branch getting ready to merge back to main
	trunk.

Tue Dec 29 13:11:16 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h: Move the following struct definitions to pthread.h:
	pthread_t_, pthread_attr_t_, pthread_mutex_t_, pthread_mutex_t_,
	pthread_mutexattr_t_, pthread_key_t_, pthread_cond_t_,
	pthread_condattr_t_, pthread_once_t_.

	* pthread.h: Add "_" prefix to pthread_push_cleanup and 
	pthread_pop_cleanup internal routines, and associated struct and
	typedefs.

	* buildlib.bat: Add compile command for semaphore.c

	* pthread.def: Comment out pthread_atfork routine name. 
	Now unimplemented.

	* tsd.c (pthread_setspecific): Rename tkAssocCreate to
	ptw32_tkAssocCreate.
	(pthread_key_delete): Rename tkAssocDestroy to
	ptw32_tkAssocDestroy.

	* sync.c (pthread_join): Rename threadDestroy to ptw32_threadDestroy

	* sched.c (is_attr): attr is now **attr (was *attr), so add extra
	NULL pointer test.
	(pthread_attr_setschedparam): Increase redirection for attr which is
	now a **.
	(pthread_attr_getschedparam): Ditto.
	(pthread_setschedparam): Change thread validation and rename "thread"
 	Win32 thread Handle element name to match John Bossom's version.
	(pthread_getschedparam): Ditto.

	* private.c (ptw32_threadDestroy): Rename call to
	callUserDestroyRoutines() as ptw32_callUserDestroyRoutines()

	* misc.c: Add #include "implement.h".

	* dll.c: Remove defined(KLUDGE) wrapped code.

	* fork.c: Remove redefinition of ENOMEM.
	Remove pthread_atfork() and fork() with #if 0/#endif.

	* create.c (pthread_create): Rename threadStart and threadDestroy calls
	to ptw32_threadStart and ptw32_threadDestroy.

	* implement.h: Rename "detachedstate" to "detachstate".

	* attr.c: Rename "detachedstate" to "detachstate".

Mon Dec 28 09:54:39 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* semaphore.c: Initial version. From John Bossom's implementation.
	* semaphore.h: Initial version. From John Bossom's implementation.

Mon Dec 28 09:54:39 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.h (pthread_attr_t_): Change to *pthread_attr_t.

	* attr.c (pthread_attr_setstacksize): Merge with John Bossom's version.
	(pthread_attr_getstacksize): Merge with John Bossom's version.
	(pthread_attr_setstackaddr): Merge with John Bossom's version.
	(pthread_attr_getstackaddr): Merge with John Bossom's version.
	(pthread_attr_init): Merge with John Bossom's version.
	(pthread_attr_destroy): Merge with John Bossom's version.
	(pthread_attr_getdetachstate): Merge with John Bossom's version.
	(pthread_attr_setdetachstate): Merge with John Bossom's version.
	(is_attr): attr is now **attr (was *attr), so add extra NULL pointer
	test.

	* implement.h (pthread_attr_t_): Add and rename elements in JEB's
	version to correspond to original, so that it can be used with
	original attr routines.

	* pthread.h: Add #endif at end which was truncated in merging.

Sun Dec 20 14:51:58 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* misc.c (pthreadCancelableWait): New function by John Bossom. Non-standard
	but provides a hook that can be used to implement cancellation points in
	applications that use this library.

	* pthread.h (pthread_cleanup_pop): C++ (non-WIN32) version uses
	try/catch to emulate John Bossom's WIN32 __try/__finally behaviour.
	In the WIN32 version __finally block, add a test for AbnormalTermination otherwise
	cleanup is only run if the cleanup_pop execute arg is non-zero. Cancellation
	should cause the cleanup to run irrespective of the execute arg.

	* condvar.c (pthread_condattr_init): Replaced by John Bossom's version.
	(pthread_condattr_destroy): Replaced by John Bossom's version.
	(pthread_condattr_getpshared): Replaced by John Bossom's version.
	(pthread_condattr_setpshared): Replaced by John Bossom's version.
	(pthread_cond_init): Replaced by John Bossom's version.
	Fix comment (refered to mutex rather than condition variable).
	(pthread_cond_destroy): Replaced by John Bossom's version.
	(pthread_cond_wait): Replaced by John Bossom's version.
	(pthread_cond_timedwait): Replaced by John Bossom's version.
	(pthread_cond_signal): Replaced by John Bossom's version.
	(pthread_cond_broadcast): Replaced by John Bossom's version.

Thu Dec 17 19:10:46 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* tsd.c (pthread_key_create): Replaced by John Bossom's version.
	(pthread_key_delete): Replaced by John Bossom's version.
	(pthread_setspecific): Replaced by John Bossom's version.
	(pthread_getspecific): Replaced by John Bossom's version.

Mon Dec  7 09:44:40 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* cancel.c (pthread_setcancelstate): Replaced by John Bossom's version.
	(pthread_setcanceltype): Replaced by John Bossom's version.
	(pthread_testcancel): Replaced by John Bossom's version.
	(pthread_cancel): Replaced by John Bossom's version.
	
	* exit.c (pthread_exit): Replaced by John Bossom's version.

	* misc.c (pthread_self): Replaced by John Bossom's version.
	(pthread_equal): Replaced by John Bossom's version.

	* sync.c (pthread_detach): Replaced by John Bossom's version.
	(pthread_join): Replaced by John Bossom's version.

	* create.c (pthread_create): Replaced by John Bossom's version.

	* private.c (ptw32_processInitialize): New by John Bossom.
	(ptw32_processTerminate): Non-public function by John Bossom.
	(ptw32_threadStart): Non-public function by John Bossom.
 	(ptw32_threadDestroy): Non-public function by John Bossom.
	(ptw32_cleanupStack): Non-public function by John Bossom.
	(ptw32_tkAssocCreate): Non-public function by John Bossom.
	(ptw32_tkAssocDestroy): Non-public function by John Bossom.
	(ptw32_callUserDestroyRoutines): Non-public function by John Bossom.

	* implement.h: Added John Bossom's non-API structures and
	declarations.

	* dll.c (PthreadsEntryPoint): Cast return value of GetProcAddress
	to resolve compile warning from MSVC.

	* dll.c (DLLmain): Replaced by John Bossom's version.
	* dll.c (PthreadsEntryPoint):
	Re-applied Anders Norlander's patch:-
	Initialize ptw32_try_enter_critical_section at startup
	and release kernel32 handle when DLL is being unloaded.

Sun Dec  6 21:54:35 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* buildlib.bat: Fix args to CL when building the .DLL

	* cleanup.c (ptw32_destructor_run_all): Fix TSD key management.
	This is a tidy-up before TSD and Thread management is completely
	replaced by John Bossom's code.

	* tsd.c (pthread_key_create): Fix TSD key management.

	* global.c (ptw32_key_virgin_next): Initialise.

	* build.bat: New DOS script to compile and link a pthreads app
	using Microsoft's CL compiler linker.
	* buildlib.bat: New DOS script to compile all the object files
	and create pthread.lib and pthread.dll using Microsoft's CL
	compiler linker.

1998-12-05  Anders Norlander  <anorland@hem2.passagen.se>

	* implement.h (ptw32_try_enter_critical_section): New extern
	* dll.c (ptw32_try_enter_critical_section): New pointer to
	TryEnterCriticalSection if it exists; otherwise NULL.
	* dll.c (PthreadsEntryPoint):
	Initialize ptw32_try_enter_critical_section at startup
	and release kernel32 handle when DLL is being unloaded.
	* mutex.c (pthread_mutex_trylock): Replaced check for NT with
	a check if ptw32_try_enter_critical_section is valid
	pointer to a function. Call ptw32_try_enter_critical_section
	instead of TryEnterCriticalSection to avoid errors on Win95.

Thu Dec 3 13:32:00 1998  Ross Johnson  <rpj@ise.canberra.edu.au>

	* README: Correct cygwin32 compatibility statement.

Sun Nov 15 21:24:06 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* cleanup.c (ptw32_destructor_run_all): Declare missing void * arg.
	Fixup CVS merge conflicts.

1998-10-30  Ben Elliston  <bje@cygnus.com>

	* condvar.c (cond_wait): Fix semantic error. Test for equality
	instead of making an assignment.

Fri Oct 30 15:15:50 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* cleanup.c (ptw32_handler_push): Fixed bug appending new
	handler to list reported by Peter Slacik
	<Peter.Slacik@leibinger.freinet.de>.
	(new_thread): Rename poorly named local variable to
	"new_handler".

Sat Oct 24 18:34:59 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* global.c: Add TSD key management array and index declarations.

	* implement.h: Ditto for externs.

Fri Oct 23 00:08:09 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h (PTW32_TSD_KEY_REUSE): Add enum.

	* private.c (ptw32_delete_thread): Add call to
	ptw32_destructor_run_all() to clean up the threads keys.

	* cleanup.c (ptw32_destructor_run_all): Check for no more dirty
	keys to run destructors on. Assume that the destructor call always
	succeeds and set the key value to NULL.

Thu Oct 22 21:44:44 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* tsd.c (pthread_setspecific): Add key management code.
	(pthread_key_create): Ditto.
	(pthread_key_delete): Ditto.

	* implement.h (struct ptw32_tsd_key): Add status member.

	* tsd.c: Add description of pthread_key_delete() from the
	standard as a comment.

Fri Oct 16 17:38:47 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* cleanup.c (ptw32_destructor_run_all): Fix and improve
	stepping through the key table.

Thu Oct 15 14:05:01 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* private.c (ptw32_new_thread): Remove init of destructorstack.
	No longer an element of pthread_t.

	* tsd.c (pthread_setspecific): Fix type declaration and cast.
	(pthread_getspecific): Ditto.
	(pthread_getspecific): Change error return value to NULL if key
	is not in use.

Thu Oct 15 11:53:21 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* global.c (ptw32_tsd_key_table): Fix declaration.

	* implement.h(ptw32_TSD_keys_TlsIndex): Add missing extern.
	(ptw32_tsd_mutex): Ditto.

	* create.c (ptw32_start_call): Fix "keys" array declaration.
	Add comment.

	* tsd.c (pthread_setspecific): Fix type declaration and cast.
	(pthread_getspecific): Ditto.

	* cleanup.c (ptw32_destructor_run_all): Declare missing loop
	counter.

Wed Oct 14 21:09:24 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c (ptw32_new_thread): Increment ptw32_threads_count.
	(ptw32_delete_thread): Decrement ptw32_threads_count.
	Remove some comments.

	* exit.c (ptw32_exit): : Fix two pthread_mutex_lock() calls that
 	should have been pthread_mutex_unlock() calls.
	(ptw32_vacuum): Remove call to ptw32_destructor_pop_all().

	* create.c (pthread_create): Fix two pthread_mutex_lock() calls that
 	should have been pthread_mutex_unlock() calls.

	* global.c (ptw32_tsd_mutex): Add mutex for TSD operations.

	* tsd.c (pthread_key_create): Add critical section.
	(pthread_setspecific): Ditto.
	(pthread_getspecific): Ditto.
	(pthread_key_delete): Ditto.

	* sync.c (pthread_join): Fix two pthread_mutex_lock() calls that
 	should have been pthread_mutex_unlock() calls.

Mon Oct 12 00:00:44 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h (ptw32_tsd_key_table): New.

	* create.c (ptw32_start_call): Initialise per-thread TSD keys
	to NULL.

	* misc.c (pthread_once): Correct typo in comment.

	* implement.h (ptw32_destructor_push): Remove.
	(ptw32_destructor_pop): Remove.
	(ptw32_destructor_run_all): Rename from ptw32_destructor_pop_all.
	(PTW32_TSD_KEY_DELETED): Add enum.
	(PTW32_TSD_KEY_INUSE): Add enum.

	* cleanup.c (ptw32_destructor_push): Remove.
	(ptw32_destructor_pop): Remove.
	(ptw32_destructor_run_all): Totally revamped TSD.

	* dll.c (ptw32_TSD_keys_TlsIndex): Initialise.

	* tsd.c (pthread_setspecific): Totally revamped TSD.
	(pthread_getspecific): Ditto.
	(pthread_create): Ditto.
	(pthread_delete): Ditto.

Sun Oct 11 22:44:55 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* global.c (ptw32_tsd_key_table): Add new global.

	* implement.h (ptw32_tsd_key_t and struct ptw32_tsd_key):
	Add.
	(struct _pthread): Remove destructorstack.

	* cleanup.c (ptw32_destructor_run_all): Rename from
 	ptw32_destructor_pop_all. The key destructor stack was made
 	global rather than per-thread. No longer removes destructor nodes
	from the stack. Comments updated.

1998-10-06  Ben Elliston  <bje@cygnus.com>

	* condvar.c (cond_wait): Use POSIX, not Win32 mutex calls.
	(pthread_cond_broadcast): Likewise.
	(pthread_cond_signal): Likewise.

1998-10-05  Ben Elliston  <bje@cygnus.com>

	* pthread.def: Update. Some functions aren't available yet, others
	are macros in <pthread.h>.

	* tests/join.c: Remove; useless.

Mon Oct  5 14:25:08 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* pthread.def: New file for building the DLL.

1998-10-05  Ben Elliston  <bje@cygnus.com>

	* misc.c (pthread_equal): Correct inverted logic bug.
	(pthread_once): Use the POSIX mutex primitives, not Win32. Remove
	irrelevant FIXME comment.

	* global.c (PTHREAD_MUTEX_INITIALIZER): Move to pthread.h.

	* pthread.h (PTHREAD_MUTEX_INITIALIZER): Define.
	(pthread_mutex_t): Reimplement as a struct containing a valid
	flag. If the flag is ever down upon entry to a mutex operation,
	we call pthread_mutex_create() to initialise the object. This
	fixes the problem of how to handle statically initialised objects
	that can't call InitializeCriticalSection() due to their context.
	(PTHREAD_ONCE_INIT): Define.

	* mutex.c (pthread_mutex_init): Set valid flag.
	(pthread_mutex_destroy): Clear valid flag.
	(pthread_mutex_lock): Check and handle the valid flag.
	(pthread_mutex_unlock): Likewise.
	(pthread_mutex_trylock): Likewise.

	* tests/mutex3.c: New file; test for the static initialisation
	macro. Passes.

	* tests/create1.c: New file; test pthread_create(). Passes.
	
	* tests/equal.c: Poor test; remove.
	
	* tests/equal1.c New file; test pthread_equal(). Passes.

	* tests/once1.c: New file; test for pthread_once(). Passes.

	* tests/self.c: Remove; rename to self1.c.

	* tests/self1.c: This is the old self.c.

	* tests/self2.c: New file. Test pthread_self() with a single
	thread. Passes.

	* tests/self3.c: New file. Test pthread_self() with a couple of
	threads to ensure their thread IDs differ. Passes.
	
1998-10-04  Ben Elliston  <bje@cygnus.com>

	* tests/mutex2.c: Test pthread_mutex_trylock(). Passes.

	* tests/mutex1.c: New basic test for mutex functions (it passes).
	(main): Eliminate warning.

	* configure.in: Test for __stdcall, not _stdcall. Typo.

	* configure: Regenerate.

	* attr.c (pthread_attr_setstackaddr): Remove FIXME comment. Win32
	does know about ENOSYS after all.
	(pthread_attr_setstackaddr): Likewise.

1998-10-03  Ben Elliston  <bje@cygnus.com>

	* configure.in: Test for the `_stdcall' keyword.  Define `STDCALL'
	to `_stdcall' if we have it, null otherwise.

	* configure: Regenerate.

	* acconfig.h (STDCALL): New define.

	* config.h.in: Regenerate.

	* create.c (ptw32_start_call): Add STDCALL prefix.
	
	* mutex.c (pthread_mutex_init): Correct function signature.

	* attr.c (pthread_attr_init): Only zero out the `sigmask' member
	if we have the sigset_t type.

	* pthread.h: No need to include <unistd.h>.  It doesn't even exist
	on Win32! Again, an artifact of cross-compilation.	
	(pthread_sigmask): Only provide if we have the sigset_t type.

	* process.h: Remove. This was a stand-in before we started doing
	native compilation under Win32.

	* pthread.h (pthread_mutex_init): Make `attr' argument const.

1998-10-02  Ben Elliston  <bje@cygnus.com>

	* COPYING: Remove.

	* COPYING.LIB: Add. This library is under the LGPL.

1998-09-13  Ben Elliston  <bje@cygnus.com>

	* configure.in: Test for required system features.

	* configure: Generate. 

	* acconfig.h: New file.

	* config.h.in: Generate.

	* Makefile.in: Renamed from Makefile.

	* COPYING: Import from a recent GNU package.

	* config.guess: Likewise.

	* config.sub: Likewise.

	* install-sh: Likewise.

	* config.h: Remove.  

	* Makefile: Likewise.

1998-09-12  Ben Elliston  <bje@cygnus.com>

	* windows.h: No longer needed; remove.

	* windows.c: Likewise.

Sat Sep 12 20:09:24 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* windows.h: Remove error number definitions. These are in <errno.h>
	
	* tsd.c: Add comment explaining rationale for not building
	POSIX TSD on top of Win32 TLS.

1998-09-12  Ben Elliston  <bje@cygnus.com>

	* {most}.c: Include <errno.h> to get POSIX error values.

	* signal.c (pthread_sigmask): Only provide if HAVE_SIGSET_T is
	defined.
 
	* config.h: #undef features, don't #define them.  This will be
	generated by autoconf very soon.
	
1998-08-11  Ben Elliston  <bje@cygnus.com>

	* Makefile (LIB): Define.
	(clean): Define target.
	(all): Build a library not just the object files.

	* pthread.h: Provide a definition for struct timespec if we don't
	already have one.

	* windows.c (TlsGetValue): Bug fix.
	
Thu Aug  6 15:19:22 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* misc.c (pthread_once): Fix arg 1 of EnterCriticalSection()
 	and LeaveCriticalSection() calls to pass address-of lock.

	* fork.c (pthread_atfork): Typecast (void (*)(void *)) funcptr
	in each ptw32_handler_push() call.

	* exit.c (ptw32_exit): Fix attr arg in 
	pthread_attr_getdetachstate() call.

	* private.c (ptw32_new_thread): Typecast (HANDLE) NULL.
	(ptw32_delete_thread): Ditto.

	* implement.h: (PTW32_MAX_THREADS): Add define. This keeps
	changing in an attempt to make thread administration data types
	opaque and cleanup DLL startup.

	* dll.c (PthreadsEntryPoint): 
	(ptw32_virgins): Remove malloc() and free() calls.
	(ptw32_reuse): Ditto.
	(ptw32_win32handle_map): Ditto.
	(ptw32_threads_mutex_table): Ditto.

	* global.c (_POSIX_THREAD_THREADS_MAX): Initialise with 
	PTW32_MAX_THREADS.
	(ptw32_virgins): Ditto.
	(ptw32_reuse): Ditto.
	(ptw32_win32handle_map): Ditto.
	(ptw32_threads_mutex_table): Ditto.

	* create.c (pthread_create): Typecast (HANDLE) NULL.
	Typecast (unsigned (*)(void *)) start_routine.

	* condvar.c (pthread_cond_init): Add address-of operator & to
	arg 1 of pthread_mutex_init() call.
	(pthread_cond_destroy): Add address-of operator & to
	arg 1 of pthread_mutex_destroy() call. 

	* cleanup.c (ptw32_destructor_pop_all): Add (int) cast to 
	pthread_getspecific() arg.
	(ptw32_destructor_pop): Add (void *) cast to "if" conditional.
	(ptw32_destructor_push): Add (void *) cast to
	ptw32_handler_push() "key" arg.
	(malloc.h): Add include.

	* implement.h (ptw32_destructor_pop): Add prototype.

	* tsd.c (implement.h): Add include.

	* sync.c (pthread_join): Remove target_thread_mutex and it's
	initialisation. Rename getdetachedstate to getdetachstate.
	Remove unused variable "exitcode".
	(pthread_detach): Remove target_thread_mutex and it's
	initialisation. Rename getdetachedstate to getdetachstate.
	Rename setdetachedstate to setdetachstate.

	* signal.c (pthread_sigmask): Rename SIG_SET to SIG_SETMASK.
	Cast "set" to (long *) in assignment to passify compiler warning.
	Add address-of operator & to thread->attr.sigmask in memcpy() call
	and assignment.
	(pthread_sigmask): Add address-of operator & to thread->attr.sigmask
	in memcpy() call and assignment.

	* windows.h (THREAD_PRIORITY_ERROR_RETURN): Add.
	(THREAD_PRIORITY_LOWEST): Add.
	(THREAD_PRIORITY_HIGHEST): Add.

	* sched.c (is_attr): Add function.
	(implement.h): Add include.
	(pthread_setschedparam): Rename all instances of "sched_policy"
	to "sched_priority".
	(pthread_getschedparam): Ditto.

Tue Aug  4 16:57:58 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* private.c (ptw32_delete_thread): Fix typo. Add missing ';'.

	* global.c (ptw32_virgins): Change types from pointer to 
	array pointer.
	(ptw32_reuse): Ditto.
	(ptw32_win32handle_map): Ditto.
	(ptw32_threads_mutex_table): Ditto.

	* implement.h(ptw32_virgins): Change types from pointer to 
	array pointer.
	(ptw32_reuse): Ditto.
	(ptw32_win32handle_map): Ditto.
	(ptw32_threads_mutex_table): Ditto.

	* private.c (ptw32_delete_thread): Fix "entry" should be "thread".

	* misc.c (pthread_self): Add extern for ptw32_threadID_TlsIndex.

	* global.c: Add comment.

	* misc.c (pthread_once): Fix member -> dereferences.
	Change ptw32_once_flag to once_control->flag in "if" test.

Tue Aug  4 00:09:30 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h(ptw32_virgins): Add extern.
	(ptw32_virgin_next): Ditto.
	(ptw32_reuse): Ditto.
	(ptw32_reuse_top): Ditto.
	(ptw32_win32handle_map): Ditto.
	(ptw32_threads_mutex_table): Ditto.

	* global.c (ptw32_virgins): Changed from array to pointer.
	Storage allocation for the array moved into dll.c.
	(ptw32_reuse): Ditto.
	(ptw32_win32handle_map): Ditto.
	(ptw32_threads_mutex_table): Ditto.

	* dll.c (PthreadsEntryPoint): Set up thread admin storage when
	DLL is loaded.

	* fork.c (pthread_atfork): Fix function pointer arg to all
	ptw32_handler_push() calls. Change "arg" arg to NULL in child push.

	* exit.c: Add windows.h and process.h includes.
	(ptw32_exit): Add local detachstate declaration.
	(ptw32_exit): Fix incorrect name for pthread_attr_getdetachstate().

	* pthread.h (_POSIX_THREAD_ATTR_STACKSIZE): Move from global.c
	(_POSIX_THREAD_ATTR_STACKADDR): Ditto.

	* create.c (pthread_create): Fix #if should be #ifdef.
	(ptw32_start_call): Remove usused variables.

	* process.h: Create.

	* windows.h: Move _beginthreadex and _endthreadex into
	process.h

Mon Aug  3 21:19:57 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* condvar.c (pthread_cond_init): Add NULL attr to
	pthread_mutex_init() call - default attributes will be used.
	(cond_wait): Fix typo.
	(cond_wait): Fix typo - cv was ev.
	(pthread_cond_broadcast): Fix two identical typos.

	* cleanup.c (ptw32_destructor_pop_all): Remove _ prefix from
	PTHREAD_DESTRUCTOR_ITERATIONS.

	* pthread.h: Move _POSIX_* values into posix.h

	* pthread.h: Fix typo in pthread_mutex_init() prototype.

	* attr.c (pthread_attr_init): Fix error in priority member init.

	* windows.h (THREAD_PRIORITY_NORMAL): Add.

	* pthread.h (sched_param): Add missing ';' to struct definition. 

	* attr.c (pthread_attr_init): Remove obsolete pthread_attr_t
	member initialisation - cancelstate, canceltype, cancel_pending.
	(is_attr): Make arg "attr" a const.

	* implement.h (PTW32_HANDLER_POP_LIFO): Remove definition.
	(PTW32_HANDLER_POP_FIFO): Ditto.
	(PTW32_VALID): Add missing newline escape (\).
	(ptw32_handler_node): Make element "next" a pointer.

1998-08-02  Ben Elliston  <bje@cygnus.com>

	* windows.h: Remove duplicate TlsSetValue() prototype.  Add 
	TlsGetValue() prototype.
	(FALSE): Define.
	(TRUE): Likewise.
	Add forgotten errno values.  Guard against multiple #includes.

	* windows.c: New file.  Implement stubs for Win32 functions.

	* Makefile (SRCS): Remove.  Not explicitly needed.
	(CFLAGS): Add -Wall for all warnings with GCC.

Sun Aug  2 19:03:42 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* config.h: Create. This is a temporary stand-in for autoconf yet
	to be done.
 	(HAVE_SIGNAL_H): Add.

	* pthread.h: Minor rearrangement for temporary config.h.

Fri Jul 31 14:00:29 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* cleanup.c (ptw32_destructor_pop): Implement. Removes
	destructors associated with a key without executing them.
	(ptw32_destructor_pop_all): Add FIXME comment.

	* tsd.c (pthread_key_delete): Add call to ptw32_destructor_pop().

Fri Jul 31 00:05:45 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* tsd.c (pthread_key_create): Update to properly associate
	the destructor routine with the key.
	(pthread_key_delete): Add FIXME comment.

	* exit.c (ptw32_vacuum): Add call to
	ptw32_destructor_pop_all().

	* implement.h (ptw32_handler_pop_all): Add prototype.
	(ptw32_destructor_pop_all): Ditto.

	* cleanup.c (ptw32_destructor_push): Implement. This is just a
	call to ptw32_handler_push().
	(ptw32_destructor_pop_all): Implement. This is significantly
	different to ptw32_handler_pop_all().

	* Makefile (SRCS): Create. Preliminary.

	* windows.h: Create. Contains Win32 definitions for compile
	testing. This is just a standin for the real one.

	* pthread.h (SIG_UNBLOCK): Fix typo. Was SIG_BLOCK.
	(windows.h): Add include. Required for CRITICAL_SECTION.
	(pthread_cond_t): Move enum declaration outside of struct
	definition.
	(unistd.h): Add include - may be temporary.

	* condvar.c (windows.h): Add include.

	* implement.h (PTW32_THIS): Remove - no longer required.
	(PTW32_STACK): Use pthread_self() instead of PTW32_THIS.

Thu Jul 30 23:12:45 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h: Remove ptw32_find_entry() prototype.

	* private.c: Extend comments.
	Remove ptw32_find_entry() - no longer needed.

	* create.c (ptw32_start_call): Add call to TlsSetValue() to
	store the thread ID.

	* dll.c (PthreadsEntryPoint): Implement. This is called
	whenever a process loads the DLL. Used to initialise thread
	local storage.

	* implement.h: Add ptw32_threadID_TlsIndex.
	Add ()s around PTW32_VALID expression.

	* misc.c (pthread_self): Re-implement using Win32 TLS to store
	the threads own ID.

Wed Jul 29 11:39:03 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c: Corrections in comments.
	(ptw32_new_thread): Alter "if" flow to be more natural.

	* cleanup.c (ptw32_handler_push): Same as below.

	* create.c (pthread_create): Same as below.

	* private.c (ptw32_new_thread): Rename "new" to "new_thread".
	Since when has a C programmer been required to know C++?

Tue Jul 28 14:04:29 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* implement.h: Add PTW32_VALID macro.

	* sync.c (pthread_join): Modify to use the new thread
	type and ptw32_delete_thread(). Rename "target" to "thread".
	Remove extra local variable "target".
	(pthread_detach): Ditto.

	* signal.c (pthread_sigmask): Move init of "us" out of inner block.
	Fix instance of "this" should have been "us". Rename "us" to "thread".

	* sched.c (pthread_setschedparam): Modify to use the new thread
	type.
	(pthread_getschedparam): Ditto.

	* private.c (ptw32_find_thread): Fix return type and arg.

	* implement.h: Remove PTW32_YES and PTW32_NO.
	(ptw32_new_thread): Add prototype.
	(ptw32_find_thread): Ditto.
	(ptw32_delete_thread): Ditto.
	(ptw32_new_thread_entry): Remove prototype.
	(ptw32_find_thread_entry): Ditto.
	(ptw32_delete_thread_entry): Ditto.
	(  PTW32_NEW, PTW32_INUSE, PTW32_EXITED, PTW32_REUSE):
	Add.


	* create.c (pthread_create): Minor rename "us" to "new" (I need
	these cues but it doesn't stop me coming out with some major bugs
	at times).
	Load start_routine and arg into the thread so the wrapper can
	call it.

	* exit.c (pthread_exit): Fix pthread_this should be pthread_self.

	* cancel.c (pthread_setcancelstate): Change
 	ptw32_threads_thread_t * to pthread_t and init with
 	pthread_this().
	(pthread_setcanceltype): Ditto.

	* exit.c (ptw32_exit): Add new pthread_t arg.
	Rename ptw32_delete_thread_entry to ptw32_delete_thread.
	Rename "us" to "thread".
	(pthread_exit): Call ptw32_exit with added thread arg.

	* create.c (ptw32_start_call): Insert missing ")".
	Add "us" arg to ptw32_exit() call.
	(pthread_create): Modify to use new thread allocation scheme.

	* private.c: Added detailed explanation of the new thread
	allocation scheme.
	(ptw32_new_thread): Totally rewritten to use
	new thread allocation scheme.
	(ptw32_delete_thread): Ditto.
	(ptw32_find_thread): Obsolete.

Mon Jul 27 17:46:37 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* create.c (pthread_create): Start of rewrite. Not completed yet.

	* private.c (ptw32_new_thread_entry): Start of rewrite. Not
	complete.

	* implement.h (ptw32_threads_thread): Rename, remove thread
	member, add win32handle and ptstatus members.
	(ptw32_t): Add.

	* pthread.h: pthread_t is no longer mapped directly to a Win32
	HANDLE type. This is so we can let the Win32 thread terminate and
	reuse the HANDLE while pthreads holds it's own thread ID until
	the last waiting join exits.

Mon Jul 27 00:20:37 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c (ptw32_delete_thread_entry): Destroy the thread
 	entry attribute object before deleting the thread entry itself.

	* attr.c (pthread_attr_init): Initialise cancel_pending = FALSE.
	(pthread_attr_setdetachstate): Rename "detached" to "detachedstate".
	(pthread_attr_getdetachstate): Ditto.

	* exit.c (ptw32_exit): Fix incorrect check for detachedstate.

	* implement.h (ptw32_call_t): Remove env member. 

Sun Jul 26 13:06:12 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h (ptw32_new_thread_entry): Fix prototype.
	(ptw32_find_thread_entry): Ditto.
	(ptw32_delete_thread_entry): Ditto.
	(ptw32_exit): Add prototype.

	* exit.c (ptw32_exit): New function. Called from pthread_exit()
	and ptw32_start_call() to exit the thread. It allows an extra
	argument which is the return code passed to _endthreadex().
	(ptw32_exit): Move thread entry delete call from ptw32_vacuum()
	into here. Add more explanation of thread entry deletion.
	(ptw32_exit): Clarify comment.

	* create.c (ptw32_start_call): Change pthread_exit() call to
	ptw32_exit() call.

	* exit.c (ptw32_vacuum): Add thread entry deletion code
	moved from ptw32_start_call(). See next item.
	(pthread_exit): Remove longjmp(). Add mutex lock around thread table
	manipulation code. This routine now calls _enthreadex().

	* create.c (ptw32_start_call): Remove setjmp() call and move
	cleanup code out. Call pthread_exit(NULL) to terminate the thread.

1998-07-26  Ben Elliston  <bje@cygnus.com>

	* tsd.c (pthread_getspecific): Update comments.

	* mutex.c (pthread_mutexattr_setpshared): Not supported; remove.
	(pthread_mutexattr_getpshared): Likewise.

	* pthread.h (pthread_mutexattr_setpshared): Remove prototype.
	(pthread_mutexattr_getpshared): Likewise.

Sun Jul 26 00:09:59 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* sync.c: Rename all instances of ptw32_count_mutex to
	ptw32_table_mutex.

	* implement.h: Rename ptw32_count_mutex to
	ptw32_table_mutex.

	* global.c: Rename ptw32_count_mutex to
	ptw32_table_mutex.

	* create.c (pthread_create): Add critical sections.
	(ptw32_start_call): Rename ptw32_count_mutex to
	ptw32_table_mutex.

	* cancel.c (pthread_setcancelstate): Fix indirection bug and rename
	"this" to "us".

	* signal.c (pthread_sigmask): Rename "this" to "us" and fix some
	minor syntax errors. Declare "us" and initialise it.

	* sync.c (pthread_detach): Rename "this" to "target".

	* pthread.h: Converting PTHREAD_* defines to alias the (const int)
	values in global.c.

	* global.c: Started converting PTHREAD_* defines to (const int) as
 	a part of making the eventual pthreads DLL binary compatible
 	through version changes.

	* condvar.c (cond_wait): Add cancelation point. This applies the
	point to both pthread_cond_wait() and pthread_cond_timedwait().

	* exit.c (pthread_exit): Rename "this" to "us".

	* implement.h: Add comment.

	* sync.c (pthread_join): I've satisfied myself that pthread_detach()
	does set the detached attribute in the thread entry attributes
	to PTHREAD_CREATE_DETACHED. "if" conditions were changed to test
	that attribute instead of a separate flag.

	* create.c (pthread_create): Rename "this" to "us".
	(pthread_create): cancelstate and canceltype are not attributes
	so the copy to thread entry attribute storage was removed.
	Only the thread itself can change it's cancelstate or canceltype,
	ie. the thread must exist already.

	* private.c (ptw32_delete_thread_entry): Mutex locks removed.
	Mutexes must be applied at the caller level.
	(ptw32_new_thread_entry): Ditto.
	(ptw32_new_thread_entry): Init cancelstate, canceltype, and
	cancel_pending to default values.
	(ptw32_new_thread_entry): Rename "this" to "new".
	(ptw32_find_thread_entry): Rename "this" to "entry".
	(ptw32_delete_thread_entry): Rename "thread_entry" to "entry".

	* create.c (ptw32_start_call): Mutexes changed to
	ptw32_count_mutex. All access to the threads table entries is
	under the one mutex. Otherwise chaos reigns.

Sat Jul 25 23:16:51 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h (ptw32_threads_thread): Move cancelstate and
 	canceltype members out of pthread_attr_t into here.

	* fork.c (fork): Add comment.

1998-07-25  Ben Elliston  <bje@cygnus.com>

	* fork.c (fork): Autoconfiscate.

Sat Jul 25 00:00:13 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* create.c (ptw32_start_call): Set thread priority.  Ensure our
 	thread entry is removed from the thread table but only if
 	pthread_detach() was called and there are no waiting joins.
	(pthread_create): Set detach flag in thread entry if the 
	thread is created PTHREAD_CREATE_DETACHED.

	* pthread.h (pthread_attr_t): Rename member "detachedstate".

	* attr.c (pthread_attr_init): Rename attr members.

	* exit.c (pthread_exit): Fix indirection mistake.

	* implement.h (PTW32_THREADS_TABLE_INDEX): Add.

	* exit.c (ptw32_vacuum): Fix incorrect args to
	ptw32_handler_pop_all() calls.
	Make thread entry removal conditional.

	* sync.c (pthread_join): Add multiple join and async detach handling.

	* implement.h (PTW32_THREADS_TABLE_INDEX): Add.

	* global.c (ptw32_threads_mutex_table): Add.

	* implement.h (ptw32_once_flag): Remove.
	(ptw32_once_lock): Ditto.
	(ptw32_threads_mutex_table): Add.

	* global.c (ptw32_once_flag): Remove.
	(ptw32_once_lock): Ditto.

	* sync.c (pthread_join): Fix tests involving new return value
	from ptw32_find_thread_entry().
	(pthread_detach): Ditto.

	* private.c (ptw32_find_thread_entry): Failure return code
	changed from -1 to NULL.

Fri Jul 24 23:09:33 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* create.c (pthread_create): Change . to -> in sigmask memcpy() args.

	* pthread.h: (pthread_cancel): Add function prototype.
	(pthread_testcancel): Ditto.

1998-07-24  Ben Elliston  <bje@cygnus.com>

	* pthread.h (pthread_condattr_t): Rename dummy structure member.
	(pthread_mutexattr_t): Likewise.

Fri Jul 24 21:13:55 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* cancel.c (pthread_cancel): Implement.
	(pthread_testcancel): Implement.

	* exit.c (pthread_exit): Add comment explaining the longjmp().

	* implement.h (ptw32_threads_thread_t): New member cancelthread.
	(PTW32_YES): Define.
	(PTW32_NO): Define.
	(RND_SIZEOF): Remove.

	* create.c (pthread_create): Rename cancelability to cancelstate.

	* pthread.h (pthread_attr_t): Rename cancelability to cancelstate.
	(PTHREAD_CANCELED): Define.

1998-07-24  Ben Elliston  <bje@cygnus.com>

	* pthread.h (SIG_BLOCK): Define if not already defined.
	(SIG_UNBLOCK): Likewise.
	(SIG_SETMASK): Likewise.
	(pthread_attr_t): Add signal mask member.
	(pthread_sigmask): Add function prototype.

	* signal.c (pthread_sigmask): Implement.

	* create.c: #include <string.h> to get a prototype for memcpy().
	(pthread_create): New threads inherit their creator's signal
	mask.  Copy the signal mask to the new thread structure if we know
	about signals.
	
Fri Jul 24 16:33:17 1998  Ross Johnson  <rpj@swan.canberra.edu.au>

	* fork.c (pthread_atfork): Add all the necessary push calls.
	Local implementation semantics:
	If we get an ENOMEM at any time then ALL handlers
	(including those from previous pthread_atfork() calls) will be
	popped off each of the three atfork stacks before we return.
	(fork): Add all the necessary pop calls. Add the thread cancellation
	and join calls to the child fork.
	Add #includes.

	* implement.h: (ptw32_handler_push): Fix return type and stack arg
	type in prototype.
	(ptw32_handler_pop): Fix stack arg type in prototype.
	(ptw32_handler_pop_all): Fix stack arg type in prototype.

	* cleanup.c (ptw32_handler_push): Change return type to int and
	return ENOMEM if malloc() fails.

	* sync.c (pthread_detach): Use equality test, not assignment.

	* create.c (ptw32_start_call): Add call to Win32 CloseHandle()
	if thread is detached.

1998-07-24  Ben Elliston  <bje@cygnus.com>

	* sync.c (pthread_detach): Close the Win32 thread handle to
	emulate detached (or daemon) threads.

Fri Jul 24 03:00:25 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* sync.c (pthread_join): Save valueptr arg in joinvalueptr for
	pthread_exit() to use.

	* private.c (ptw32_new_thread_entry): Initialise joinvalueptr to
	NULL.

	* create.c (ptw32_start_call): Rewrite to facilitate joins.
	pthread_exit() will do a longjmp() back to here. Does appropriate
	cleanup and exit/return from the thread.
	(pthread_create): _beginthreadex() now passes a pointer to our
	thread table entry instead of just the call member of that entry.

	* implement.h (ptw32_threads_thread): New member 
	void ** joinvalueptr.
	(ptw32_call_t): New member jmpbuf env.

	* exit.c (pthread_exit): Major rewrite to handle joins and handing
	value pointer to joining thread. Uses longjmp() back to 
	ptw32_start_call().

	* create.c (pthread_create): Ensure values of new attribute members
	are copied to the thread attribute object.

	* attr.c (pthread_attr_destroy):  Fix merge conflicts.
	(pthread_attr_getdetachstate):  Fix merge conflicts.
	(pthread_attr_setdetachstate):  Fix merge conflicts.

	* pthread.h:  Fix merge conflicts.

	* sync.c (pthread_join): Fix merge conflicts.

Fri Jul 24 00:21:21 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* sync.c (pthread_join): Add check for valid and joinable
	thread.
	(pthread_detach): Implement. After checking for a valid and joinable
	thread, it's still a no-op.

	* private.c (ptw32_find_thread_entry): Bug prevented returning
	an error value in some cases.

	* attr.c (pthread_attr_setdetachedstate): Implement.
	(pthread_attr_getdetachedstate): Implement.

	* implement.h: Move more hidden definitions into here from
	pthread.h.

1998-07-24  Ben Elliston  <bje@cygnus.com>

	* pthread.h (PTHREAD_CREATE_JOINABLE): Define.
	(PTHREAD_CREATE_DETACHED): Likewise.
	(pthread_attr_t): Add new structure member `detached'.
	(pthread_attr_getdetachstate): Add function prototype.
	(pthread_attr_setdetachstate): Likewise.

	* sync.c (pthread_join): Return if the target thread is detached.

	* attr.c (pthread_attr_init): Initialise cancelability and
	canceltype structure members.
	(pthread_attr_getdetachstate): Implement.
	(pthread_attr_setdetachstate): Likewise.

	* implement.h (PTW32_CANCEL_DEFAULTS): Remove.  Bit fields
	proved to be too cumbersome.  Set the defaults in attr.c using the
	public PTHREAD_CANCEL_* constants.

	* cancel.c: New file.

	* pthread.h (sched_param): Define this type.
	(pthread_attr_getschedparam): Add function prototype.
	(pthread_attr_setschedparam): Likewise.
	(pthread_setcancelstate): Likewise.
	(pthread_setcanceltype): Likewise.
	(sched_get_priority_min): Likewise.
	(sched_get_priority_max): Likewise.
	(pthread_mutexattr_setprotocol): Remove; not supported.
	(pthread_mutexattr_getprotocol): Likewise.
	(pthread_mutexattr_setprioceiling): Likewise.
	(pthread_mutexattr_getprioceiling): Likewise.
	(pthread_attr_t): Add canceltype member.  Update comments.
	(SCHED_OTHER): Define this scheduling policy constant.
	(SCHED_FIFO): Likewise.
	(SCHED_RR): Likewise.
	(SCHED_MIN): Define the lowest possible value for this constant.
	(SCHED_MAX): Likewise, the maximum possible value.
	(PTHREAD_CANCEL_ASYNCHRONOUS): Redefine.
	(PTHREAD_CANCEL_DEFERRED): Likewise.
	
	* sched.c: New file.
	(pthread_setschedparam): Implement.
	(pthread_getschedparam): Implement.
	(sched_get_priority_max): Validate policy argument.
	(sched_get_priority_min): Likewise.

	* mutex.c (pthread_mutexattr_setprotocol): Remove; not supported.
	(pthread_mutexattr_getprotocol): Likewise.
	(pthread_mutexattr_setprioceiling): Likewise.
	(pthread_mutexattr_getprioceiling): Likewise.

Fri Jul 24 00:21:21 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* create.c (pthread_create): Arg to ptw32_new_thread_entry()
	changed. See next entry. Move mutex locks out. Changes made yesterday
	and today allow us to start the new thread running rather than
	temporarily suspended.

	* private.c (ptw32_new_thread_entry): ptw32_thread_table
	was changed back to a table of thread structures rather than pointers.
	As such we're trading storage for increaded speed. This routine
	was modified to work with the new table. Mutex lock put in around
	global data accesses.
	(ptw32_find_thread_entry): Ditto
	(ptw32_delete_thread_entry): Ditto

Thu Jul 23 23:25:30 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* global.c: New. Global data objects declared here. These moved from
	pthread.h.

	* pthread.h: Move implementation hidden definitions into
	implement.h.

	* implement.h: Move implementation hidden definitions from
	pthread.h. Add constants to index into the different handler stacks.

	* cleanup.c (ptw32_handler_push): Simplify args. Restructure.
	(ptw32_handler_pop): Simplify args. Restructure.
	(ptw32_handler_pop_all): Simplify args. Restructure.

Wed Jul 22 00:16:22 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* attr.c, implement.h, pthread.h, ChangeLog: Resolve CVS merge
	conflicts.

	* private.c (ptw32_find_thread_entry): Changes to return type
	to support leaner ptw32_threads_table[] which now only stores
	ptw32_thread_thread_t *.
	(ptw32_new_thread_entry): Internal changes.
	(ptw32_delete_thread_entry): Internal changes to avoid contention.
 	Calling routines changed accordingly.

	* pthread.h: Modified cleanup macros to use new generic push and pop.
	Added destructor and atfork stacks to ptw32_threads_thread_t.

	* cleanup.c (ptw32_handler_push, ptw32_handler_pop,
	ptw32_handler_pop_all): Renamed cleanup push and pop routines
	and made generic to handle destructors and atfork handlers as
	well.

	* create.c (ptw32_start_call): New function is a wrapper for
	all new threads. It allows us to do some cleanup when the thread
	returns, ie. that is otherwise only done if the thread is cancelled.

	* exit.c (ptw32_vacuum): New function contains code from 
	pthread_exit() that we need in the new ptw32_start_call()
	as well.

	* implement.h: Various additions and minor changes.

	* pthread.h: Various additions and minor changes.
	Change cleanup handler macros to use generic handler push and pop
	functions.

	* attr.c: Minor mods to all functions.
	(is_attr): Implemented missing function.

	* create.c (pthread_create): More clean up.

	* private.c (ptw32_find_thread_entry): Implement.
	(ptw32_delete_thread_entry): Implement.
	(ptw32_new_thread_entry): Implement.
	These functions manipulate the implementations internal thread
	table and are part of general code cleanup and modularisation.
	They replace ptw32_getthreadindex() which was removed.

	* exit.c (pthread_exit): Changed to use the new code above.

	* pthread.h: Add cancelability constants. Update comments.

1998-07-22  Ben Elliston  <bje@cygnus.com>

	* attr.c (pthread_setstacksize): Update test of attr argument.
	(pthread_getstacksize): Likewise.
	(pthread_setstackaddr): Likewise.
	(pthread_getstackaddr): Likewise.
	(pthread_attr_init): No need to allocate any storage.
	(pthread_attr_destroy): No need to free any storage.

	* mutex.c (is_attr): Not likely to be needed; remove.
	(remove_attr): Likewise.
	(insert_attr): Likewise.

	* implement.h (ptw32_mutexattr_t): Moved to a public definition
	in pthread.h.  There was little gain in hiding these details.
	(ptw32_condattr_t): Likewise.
	(ptw32_attr_t): Likewise.

	* pthread.h (pthread_atfork): Add function prototype.
	(pthread_attr_t): Moved here from implement.h.

	* fork.c (pthread_atfork): Preliminary implementation.
	(ptw32_fork): Likewise.

Wed Jul 22 00:16:22 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* cleanup.c (ptw32_cleanup_push): Implement.
	(ptw32_cleanup_pop): Implement.
	(ptw32_do_cancellation): Implement.
	These are private to the implementation. The real cleanup functions
	are macros. See below.

	* pthread.h (pthread_cleanup_push): Implement as a macro.
	(pthread_cleanup_pop): Implement as a macro.
	Because these are macros which start and end a block, the POSIX scoping
	requirement is observed. See the comment in the file.

	* exit.c (pthread_exit): Refine the code.

	* create.c (pthread_create): Code cleanup.

	* implement.h (RND_SIZEOF): Add RND_SIZEOF(T) to round sizeof(T)
	up to multiple of DWORD.
	Add function prototypes.

	* private.c (ptw32_getthreadindex): "*thread" should have been 
	"thread". Detect empty slot fail condition.

1998-07-20  Ben Elliston  <bje@cygnus.com>

	* misc.c (pthread_once): Implement.  Don't use a per-application
	flag and mutex--make `pthread_once_t' contain these elements in
	their structure.  The earlier version had incorrect semantics.
	
	* pthread.h (ptw32_once_flag): Add new variable.  Remove.
	(ptw32_once_lock): Add new mutex lock to ensure integrity of
	access to ptw32_once_flag.  Remove.
	(pthread_once): Add function prototype.
	(pthread_once_t): Define this type.
	
Mon Jul 20 02:31:05 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* private.c (ptw32_getthreadindex): Implement.

	* pthread.h: Add application static data dependent on
	_PTHREADS_BUILD_DLL define. This is needed to avoid allocating
	non-sharable static data within the pthread DLL.

	* implement.h: Add ptw32_cleanup_stack_t, ptw32_cleanup_node_t
	and PTW32_HASH_INDEX.

	* exit.c (pthread_exit): Begin work on cleanup and de-allocate
	thread-private storage.

	* create.c (pthread_create): Add thread to thread table.
	Keep a thread-private copy of the attributes with default values
	filled in when necessary. Same for the cleanup stack. Make 
	pthread_create C run-time library friendly by using _beginthreadex()
	instead of CreateThread(). Fix error returns.

Sun Jul 19 16:26:23 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h: Rename pthreads_thread_count to ptw32_threads_count.
	Create ptw32_threads_thread_t struct to keep thread specific data.

	* create.c: Rename pthreads_thread_count to ptw32_threads_count.
	(pthread_create): Handle errors from CreateThread().

1998-07-19  Ben Elliston  <bje@cygnus.com>

	* condvar.c (pthread_cond_wait): Generalise.  Moved from here ..
	(cond_wait): To here.
	(pthread_cond_timedwait): Implement; use generalised cond_wait().

	* pthread.h (pthread_key_t): Define this type.
	(pthread_key_create): Add function prototype.
	(pthread_setspecific): Likewise.
	(pthread_getspecific): Likwise.
	(pthread_key_delete): Likewise.

	* tsd.c (pthread_key_create): Implement.
	(pthread_setspecific): Likewise.
	(pthread_getspecific): Likewise.
	(pthread_key_delete): Likewise.

	* mutex.c (pthread_mutex_trylock): Return ENOSYS if this function
	is called on a Win32 platform which is not Windows NT.

1998-07-18  Ben Elliston  <bje@cygnus.com>

	* condvar.c (pthread_condattr_init): Do not attempt to malloc any
	storage; none is needed now that condattr_t is an empty struct.
	(pthread_condattr_destory): Likewise; do not free storage.
	(pthread_condattr_setpshared): No longer supported; return ENOSYS.
	(pthread_condattr_getpshared): Likewise.
	(pthread_cond_init): Implement with help from Douglas Schmidt.
	Remember to initialise the cv's internal mutex.
	(pthread_cond_wait): Likewise.
	(pthread_cond_signal): Likewise.
	(pthread_cond_broadcast): Likewise.
	(pthread_cond_timedwait): Preliminary implementation, but I need
	to see some API documentation for `WaitForMultipleObject'.
	(pthread_destory): Implement.

	* pthread.h (pthread_cond_init): Add function protoype.
	(pthread_cond_broadcast): Likewise.
	(pthread_cond_signal): Likewise.
	(pthread_cond_timedwait): Likewise.
	(pthread_cond_wait): Likewise.
	(pthread_cond_destroy): Likewise.
	(pthread_cond_t): Define this type.  Fix for u_int.  Do not assume
	that the mutex contained withing the pthread_cond_t structure will
	be a critical section.  Use our new POSIX type!

	* implement.h (ptw32_condattr_t): Remove shared attribute.

1998-07-17  Ben Elliston  <bje@cygnus.com>

	* pthread.h (PTHREADS_PROCESS_PRIVATE): Remove.
	(PTHREAD_PROCESS_SHARED): Likewise.  No support for mutexes shared
	across processes for now.
	(pthread_mutex_t): Use a Win32 CRITICAL_SECTION type for better
	performance.
	
	* implement.h (ptw32_mutexattr_t): Remove shared attribute.
	
	* mutex.c (pthread_mutexattr_setpshared): This optional function
	is no longer supported, since we want to implement POSIX mutex
	variables using the much more efficient Win32 critical section
	primitives.  Critical section objects in Win32 cannot be shared
	between processes.
	(pthread_mutexattr_getpshared): Likewise.
	(pthread_mutexattr_init): No need to malloc any storage; the
	attributes structure is now empty.
	(pthread_mutexattr_destroy): This is now a nop.
	(pthread_mutex_init): Use InitializeCriticalSection().
	(pthread_mutex_destroy): Use DeleteCriticalSection().
	(pthread_mutex_lock): Use EnterCriticalSection().
	(pthread_mutex_trylock): Use TryEnterCriticalSection().  This is
	not supported by Windows 9x, but trylock is a hack anyway, IMHO.
	(pthread_mutex_unlock): Use LeaveCriticalSection().

1998-07-14  Ben Elliston  <bje@cygnus.com>

	* attr.c (pthread_attr_setstacksize): Implement.
	(pthread_attr_getstacksize): Likewise.
	(pthread_attr_setstackaddr): Likewise.
	(pthread_attr_getstackaddr): Likewise.
	(pthread_attr_init): Likewise.
	(pthread_attr_destroy): Likewise.
	
	* condvar.c (pthread_condattr_init): Add `_cond' to function name.

	* mutex.c (pthread_mutex_lock): Add `_mutex' to function name.
	(pthread_mutex_trylock): Likewise.
	(pthread_mutex_unlock): Likewise.

	* pthread.h (pthread_condattr_setpshared): Fix typo.
	(pthread_attr_init): Add function prototype.
	(pthread_attr_destroy): Likewise.
	(pthread_attr_setstacksize): Likewise.
	(pthread_attr_getstacksize): Likewise.
	(pthread_attr_setstackaddr): Likewise.
	(pthread_attr_getstackaddr): Likewise.
	
Mon Jul 13 01:09:55 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h: Wrap in #ifndef _IMPLEMENT_H

	* create.c (pthread_create): Map stacksize attr to Win32.

	* mutex.c: Include implement.h

1998-07-13  Ben Elliston  <bje@cygnus.com>

	* condvar.c (pthread_condattr_init): Implement.
	(pthread_condattr_destroy): Likewise.
	(pthread_condattr_setpshared): Likewise.
	(pthread_condattr_getpshared): Likewise.
	
	* implement.h (PTHREAD_THREADS_MAX): Remove trailing semicolon.
	(PTHREAD_STACK_MIN): Specify; needs confirming.
	(ptw32_attr_t): Define this type.
	(ptw32_condattr_t): Likewise.

	* pthread.h (pthread_mutex_t): Define this type.
	(pthread_condattr_t): Likewise.
	(pthread_mutex_destroy): Add function prototype.
	(pthread_lock): Likewise.
	(pthread_trylock): Likewise.
	(pthread_unlock): Likewise.
	(pthread_condattr_init): Likewise.
	(pthread_condattr_destroy): Likewise.
	(pthread_condattr_setpshared): Likewise.
	(pthread_condattr_getpshared): Likewise.

	* mutex.c (pthread_mutex_init): Implement.
	(pthread_mutex_destroy): Likewise.
	(pthread_lock): Likewise.
	(pthread_trylock): Likewise.
	(pthread_unlock): Likewise.

1998-07-12  Ben Elliston  <bje@cygnus.com>

	* implement.h (ptw32_mutexattr_t): Define this implementation
	internal type.  Application programmers only see a mutex attribute
	object as a void pointer.

	* pthread.h (pthread_mutexattr_t): Define this type.
	(pthread_mutexattr_init): Add function prototype.
	(pthread_mutexattr_destroy): Likewise.
	(pthread_mutexattr_setpshared): Likewise.
	(pthread_mutexattr_getpshared): Likewise.
	(pthread_mutexattr_setprotocol): Likewise.
	(pthread_mutexattr_getprotocol): Likewise.
	(pthread_mutexattr_setprioceiling): Likewise.
	(pthread_mutexattr_getprioceiling): Likewise.
	(PTHREAD_PROCESS_PRIVATE): Define.
	(PTHREAD_PROCESS_SHARED): Define.

	* mutex.c (pthread_mutexattr_init): Implement.
	(pthread_mutexattr_destroy): Implement.
	(pthread_mutexattr_setprotocol): Implement.
	(pthread_mutexattr_getprotocol): Likewise.
	(pthread_mutexattr_setprioceiling): Likewise.
	(pthread_mutexattr_getprioceiling): Likewise.
	(pthread_mutexattr_setpshared): Likewise.
	(pthread_mutexattr_getpshared): Likewise.
	(insert_attr): New function; very preliminary implementation!
	(is_attr): Likewise.
	(remove_attr): Likewise.
	
Sat Jul 11 14:48:54 1998  Ross Johnson  <rpj@ixobrychus.canberra.edu.au>

	* implement.h: Preliminary implementation specific defines.

	* create.c (pthread_create): Preliminary implementation.

1998-07-11  Ben Elliston  <bje@cygnus.com>

	* sync.c (pthread_join): Implement.

	* misc.c (pthread_equal): Likewise.
	
	* pthread.h (pthread_join): Add function prototype.
	(pthread_equal): Likewise.
	
1998-07-10  Ben Elliston  <bje@cygnus.com>

	* misc.c (pthread_self): Implement.

	* exit.c (pthread_exit): Implement.

	* pthread.h (pthread_exit): Add function prototype.
	(pthread_self): Likewise.
	(pthread_t): Define this type.

1998-07-09  Ben Elliston  <bje@cygnus.com>

	* create.c (pthread_create): A dummy stub right now.

	* pthread.h (pthread_create): Add function prototype.