From 8b1fadd6a89f12cbc81c5d621a75b91dd9eedec2 Mon Sep 17 00:00:00 2001
From: Pixel <pixel@nobis-crew.org>
Date: Sat, 5 Feb 2011 11:06:07 -0800
Subject: Adding Sun's fdlibm, and libnix's scanf, tweaked to become an xscanf.
 Adding a few more libc inlined also.

---
 libm/src/Makefile.in | 154 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 154 insertions(+)
 create mode 100644 libm/src/Makefile.in

(limited to 'libm/src/Makefile.in')

diff --git a/libm/src/Makefile.in b/libm/src/Makefile.in
new file mode 100644
index 0000000..3eb701f
--- /dev/null
+++ b/libm/src/Makefile.in
@@ -0,0 +1,154 @@
+#
+#  @(#)Makefile 1.4 95/01/18
+#
+#  ====================================================
+#  Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
+#
+#  Developed at SunSoft, a Sun Microsystems, Inc. business.
+#  Permission to use, copy, modify, and distribute this
+#  software is freely granted, provided that this notice
+#  is preserved.
+#  ====================================================
+#
+#
+
+#
+# There are two options in making libm at fdlibm compile time:
+# 	_IEEE_LIBM 	--- IEEE libm; smaller, and somewhat faster
+#	_MULTI_LIBM	--- Support multi-standard at runtime by
+#			    imposing wrapper functions defined in
+#			    fdlibm.h:
+#				_IEEE_MODE 	-- IEEE
+#				_XOPEN_MODE 	-- X/OPEN
+#				_POSIX_MODE 	-- POSIX/ANSI
+#				_SVID3_MODE 	-- SVID
+#
+# Here is how to set up CFLAGS to create the desired libm at
+# compile time:
+#
+# 	CFLAGS = -D_IEEE_LIBM		... IEEE libm (recommended)
+#	CFLAGS = -D_SVID3_MODE	... Multi-standard supported
+#					    libm with SVID as the
+#					    default standard
+#	CFLAGS = -D_XOPEN_MODE	... Multi-standard supported
+#					    libm with XOPEN as the
+#					    default standard
+#	CFLAGS = -D_POSIX_MODE	... Multi-standard supported
+#					    libm with POSIX as the
+#					    default standard
+#	CFLAGS = 			... Multi-standard supported
+#					    libm with IEEE as the
+#					    default standard
+#
+# NOTE: if scalb's second arguement is an int, then one must
+# define _SCALB_INT in CFLAGS. The default prototype of scalb
+# is double scalb(double, double)
+#
+
+prefix	= @prefix@
+
+AR	= @AR@
+
+CC	= @CC@
+
+#
+# Default IEEE libm
+#
+CFLAGS	= @CFLAGS@ -D_IEEE_LIBM
+
+CHMOD	= @CHMOD@
+
+CP	= @CP@
+
+INCFILES = fdlibm.h
+
+LDFLAGS	= @LDFLAGS@
+
+LIB	= libfdm.a
+
+LIBS	= @LIBS@
+
+RANLIB	= @RANLIB@
+
+RM	= @RM@ -f
+
+.INIT: $(INCFILES)
+
+.KEEP_STATE:
+
+src = 	k_standard.c k_rem_pio2.c \
+	k_cos.c k_sin.c k_tan.c \
+	e_acos.c e_acosh.c e_asin.c e_atan2.c \
+	e_atanh.c e_cosh.c e_exp.c e_fmod.c \
+	e_gamma.c e_gamma_r.c e_hypot.c e_j0.c \
+	e_j1.c e_jn.c e_lgamma.c e_lgamma_r.c \
+	e_log.c e_log10.c e_pow.c e_rem_pio2.c e_remainder.c \
+	e_scalb.c e_sinh.c e_sqrt.c \
+	w_acos.c w_acosh.c w_asin.c w_atan2.c \
+	w_atanh.c w_cosh.c w_exp.c w_fmod.c \
+	w_gamma.c w_gamma_r.c w_hypot.c w_j0.c \
+	w_j1.c w_jn.c w_lgamma.c w_lgamma_r.c \
+	w_log.c w_log10.c w_pow.c w_remainder.c \
+	w_scalb.c w_sinh.c w_sqrt.c \
+	s_asinh.c s_atan.c s_cbrt.c s_ceil.c s_copysign.c \
+	s_cos.c s_erf.c s_expm1.c s_fabs.c s_finite.c s_floor.c \
+	s_frexp.c s_ilogb.c s_isnan.c s_ldexp.c s_lib_version.c \
+	s_log1p.c s_logb.c s_matherr.c s_modf.c s_nextafter.c \
+	s_rint.c s_scalbn.c s_signgam.c s_significand.c s_sin.c \
+	s_tan.c s_tanh.c
+
+obj = 	k_standard.o k_rem_pio2.o \
+	k_cos.o k_sin.o k_tan.o \
+	e_acos.o e_acosh.o e_asin.o e_atan2.o \
+	e_atanh.o e_cosh.o e_exp.o e_fmod.o \
+	e_gamma.o e_gamma_r.o e_hypot.o e_j0.o \
+	e_j1.o e_jn.o e_lgamma.o e_lgamma_r.o \
+	e_log.o e_log10.o e_pow.o e_rem_pio2.o e_remainder.o  \
+	e_scalb.o e_sinh.o e_sqrt.o \
+	w_acos.o w_acosh.o w_asin.o w_atan2.o \
+	w_atanh.o w_cosh.o w_exp.o w_fmod.o \
+	w_gamma.o w_gamma_r.o w_hypot.o w_j0.o \
+	w_j1.o w_jn.o w_lgamma.o w_lgamma_r.o \
+	w_log.o w_log10.o w_pow.o w_remainder.o \
+	w_scalb.o w_sinh.o w_sqrt.o \
+	s_asinh.o s_atan.o s_cbrt.o s_ceil.o s_copysign.o \
+	s_cos.o s_erf.o s_expm1.o s_fabs.o s_finite.o s_floor.o \
+	s_frexp.o s_ilogb.o s_isnan.o s_ldexp.o s_lib_version.o \
+	s_log1p.o s_logb.o s_matherr.o s_modf.o s_nextafter.o \
+	s_rint.o s_scalbn.o s_signgam.o s_significand.o s_sin.o \
+	s_tan.o s_tanh.o
+
+all: $(LIB)
+
+check:
+	@echo This package does not have a validation suite.
+
+clean:
+	-$(RM) *~ #* core a.out
+
+distclean:	mostlyclean
+	-$(RM) $(LIB)
+	-$(RM) -r autom4te.cache/
+	-$(RM) config.cache config.log config.status Makefile
+
+install:	$(LIB) uninstall
+	$(CP) $(LIB) $(prefix)/lib/$(LIB)
+	$(CHMOD) 664 $(prefix)/lib/$(LIB)
+	$(RANLIB) $(prefix)/lib/$(LIB) || true
+
+$(LIB) : $(obj)
+	$(AR) cru $(LIB) $(obj)
+	$(RANLIB) $(LIB) || true
+
+maintainer-clean:	distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	-$(RM) configure
+
+mostlyclean:	clean
+	-$(RM) $(obj)
+
+source: $(src) README
+
+uninstall:
+	-$(RM) $(prefix)/lib/$(LIB)
-- 
cgit v1.2.3