diff options
Diffstat (limited to 'lib/zlib/src')
| -rw-r--r-- | lib/zlib/src/adler32.c | 147 | ||||
| -rw-r--r-- | lib/zlib/src/compress.c | 77 | ||||
| -rw-r--r-- | lib/zlib/src/crc32.c | 421 | ||||
| -rw-r--r-- | lib/zlib/src/deflate.c | 1734 | ||||
| -rw-r--r-- | lib/zlib/src/gzio.c | 1024 | ||||
| -rw-r--r-- | lib/zlib/src/inffast.c | 318 | ||||
| -rw-r--r-- | lib/zlib/src/inflate.c | 1368 | ||||
| -rw-r--r-- | lib/zlib/src/inftrees.c | 329 | ||||
| -rw-r--r-- | lib/zlib/src/trees.c | 1217 | ||||
| -rw-r--r-- | lib/zlib/src/uncompr.c | 59 | ||||
| -rw-r--r-- | lib/zlib/src/zutil.c | 316 |
11 files changed, 0 insertions, 7010 deletions
diff --git a/lib/zlib/src/adler32.c b/lib/zlib/src/adler32.c deleted file mode 100644 index e151bd7..0000000 --- a/lib/zlib/src/adler32.c +++ /dev/null @@ -1,147 +0,0 @@ -/* adler32.c -- compute the Adler-32 checksum of a data stream - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#define ZLIB_INTERNAL -#include "zlib.h" - -#define BASE 65521UL /* largest prime smaller than 65536 */ -#define NMAX 5552 -/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ - -#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;} -#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1); -#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2); -#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4); -#define DO16(buf) DO8(buf,0); DO8(buf,8); - -/* use NO_DIVIDE if your processor does not do division in hardware */ -#ifdef NO_DIVIDE -# define MOD(a) \ - do { \ - if (a >= (BASE << 16)) a -= (BASE << 16); \ - if (a >= (BASE << 15)) a -= (BASE << 15); \ - if (a >= (BASE << 14)) a -= (BASE << 14); \ - if (a >= (BASE << 13)) a -= (BASE << 13); \ - if (a >= (BASE << 12)) a -= (BASE << 12); \ - if (a >= (BASE << 11)) a -= (BASE << 11); \ - if (a >= (BASE << 10)) a -= (BASE << 10); \ - if (a >= (BASE << 9)) a -= (BASE << 9); \ - if (a >= (BASE << 8)) a -= (BASE << 8); \ - if (a >= (BASE << 7)) a -= (BASE << 7); \ - if (a >= (BASE << 6)) a -= (BASE << 6); \ - if (a >= (BASE << 5)) a -= (BASE << 5); \ - if (a >= (BASE << 4)) a -= (BASE << 4); \ - if (a >= (BASE << 3)) a -= (BASE << 3); \ - if (a >= (BASE << 2)) a -= (BASE << 2); \ - if (a >= (BASE << 1)) a -= (BASE << 1); \ - if (a >= BASE) a -= BASE; \ - } while (0) -# define MOD4(a) \ - do { \ - if (a >= (BASE << 4)) a -= (BASE << 4); \ - if (a >= (BASE << 3)) a -= (BASE << 3); \ - if (a >= (BASE << 2)) a -= (BASE << 2); \ - if (a >= (BASE << 1)) a -= (BASE << 1); \ - if (a >= BASE) a -= BASE; \ - } while (0) -#else -# define MOD(a) a %= BASE -# define MOD4(a) a %= BASE -#endif - -/* ========================================================================= */ -uLong ZEXPORT adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; -{ - unsigned long sum2; - unsigned n; - - /* split Adler-32 into component sums */ - sum2 = (adler >> 16) & 0xffff; - adler &= 0xffff; - - /* in case user likes doing a byte at a time, keep it fast */ - if (len == 1) { - adler += buf[0]; - if (adler >= BASE) - adler -= BASE; - sum2 += adler; - if (sum2 >= BASE) - sum2 -= BASE; - return adler | (sum2 << 16); - } - - /* initial Adler-32 value (deferred check for len == 1 speed) */ - if (buf == Z_NULL) - return 1L; - - /* in case short lengths are provided, keep it somewhat fast */ - if (len < 16) { - while (len--) { - adler += *buf++; - sum2 += adler; - } - if (adler >= BASE) - adler -= BASE; - MOD4(sum2); /* only added so many BASE's */ - return adler | (sum2 << 16); - } - - /* do length NMAX blocks -- requires just one modulo operation */ - while (len >= NMAX) { - len -= NMAX; - n = NMAX / 16; /* NMAX is divisible by 16 */ - do { - DO16(buf); /* 16 sums unrolled */ - buf += 16; - } while (--n); - MOD(adler); - MOD(sum2); - } - - /* do remaining bytes (less than NMAX, still just one modulo) */ - if (len) { /* avoid modulos if none remaining */ - while (len >= 16) { - len -= 16; - DO16(buf); - buf += 16; - } - while (len--) { - adler += *buf++; - sum2 += adler; - } - MOD(adler); - MOD(sum2); - } - - /* return recombined sums */ - return adler | (sum2 << 16); -} - -/* ========================================================================= */ -uLong ZEXPORT adler32_combine(adler1, adler2, len2) - uLong adler1; - uLong adler2; - z_off_t len2; -{ - unsigned long sum1; - unsigned long sum2; - unsigned rem; - - /* the derivation of this formula is left as an exercise for the reader */ - rem = (unsigned)(len2 % BASE); - sum1 = adler1 & 0xffff; - sum2 = rem * sum1; - MOD(sum2); - sum1 += (adler2 & 0xffff) + BASE - 1; - sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem; - if (sum1 > BASE) sum1 -= BASE; - if (sum1 > BASE) sum1 -= BASE; - if (sum2 > (BASE << 1)) sum2 -= (BASE << 1); - if (sum2 > BASE) sum2 -= BASE; - return sum1 | (sum2 << 16); -} diff --git a/lib/zlib/src/compress.c b/lib/zlib/src/compress.c deleted file mode 100644 index 9bae035..0000000 --- a/lib/zlib/src/compress.c +++ /dev/null @@ -1,77 +0,0 @@ -/* compress.c -- compress a memory buffer - * Copyright (C) 1995-2003 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#define ZLIB_INTERNAL -#include "zlib.h" - -/* =========================================================================== - Compresses the source buffer into the destination buffer. The level - parameter has the same meaning as in deflateInit. sourceLen is the byte - length of the source buffer. Upon entry, destLen is the total size of the - destination buffer, which must be at least 0.1% larger than sourceLen plus - 12 bytes. Upon exit, destLen is the actual size of the compressed buffer. - - compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough - memory, Z_BUF_ERROR if there was not enough room in the output buffer, - Z_STREAM_ERROR if the level parameter is invalid. -*/ -int ZEXPORT compress2 (dest, destLen, source, sourceLen, level) - Bytef *dest; - uLongf *destLen; - const Bytef *source; - uLong sourceLen; - int level; -{ - z_stream stream; - int err; - - stream.next_in = (Bytef*)source; - stream.avail_in = (uInt)sourceLen; -#ifdef MAXSEG_64K - /* Check for source > 64K on 16-bit machine: */ - if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; -#endif - stream.next_out = dest; - stream.avail_out = (uInt)*destLen; - if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; - - stream.zalloc = (alloc_func)0; - stream.zfree = (free_func)0; - stream.opaque = (voidpf)0; - - err = deflateInit(&stream, level); - if (err != Z_OK) return err; - - err = deflate(&stream, Z_FINISH); - if (err != Z_STREAM_END) { - deflateEnd(&stream); - return err == Z_OK ? Z_BUF_ERROR : err; - } - *destLen = stream.total_out; - - err = deflateEnd(&stream); - return err; -} - -/* =========================================================================== - */ -int ZEXPORT compress (dest, destLen, source, sourceLen) - Bytef *dest; - uLongf *destLen; - const Bytef *source; - uLong sourceLen; -{ - return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION); -} - -/* =========================================================================== - If the default memLevel or windowBits for deflateInit() is changed, then - this function needs to be updated. - */ -uLong ZEXPORT compressBound (sourceLen) - uLong sourceLen; -{ - return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11; -} diff --git a/lib/zlib/src/crc32.c b/lib/zlib/src/crc32.c deleted file mode 100644 index c066dd8..0000000 --- a/lib/zlib/src/crc32.c +++ /dev/null @@ -1,421 +0,0 @@ -/* crc32.c -- compute the CRC-32 of a data stream - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - * - * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster - * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing - * tables for updating the shift register in one step with three exclusive-ors - * instead of four steps with four exclusive-ors. This results in about a - * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3. - */ - -/* - Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore - protection on the static variables used to control the first-use generation - of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should - first call get_crc_table() to initialize the tables before allowing more than - one thread to use crc32(). - */ - -#ifdef MAKECRCH -# include <stdio.h> -# ifndef DYNAMIC_CRC_TABLE -# define DYNAMIC_CRC_TABLE -# endif /* !DYNAMIC_CRC_TABLE */ -#endif /* MAKECRCH */ - -#include "zutil.h" /* for STDC and FAR definitions */ - -#define local static - -/* Find a four-byte integer type for crc32_little() and crc32_big(). */ -#ifndef NOBYFOUR -# ifdef STDC /* need ANSI C limits.h to determine sizes */ -# include <limits.h> -# define BYFOUR -# if (UINT_MAX == 0xffffffffUL) - typedef unsigned int u4; -# else -# if (ULONG_MAX == 0xffffffffUL) - typedef unsigned long u4; -# else -# if (USHRT_MAX == 0xffffffffUL) - typedef unsigned short u4; -# else -# undef BYFOUR /* can't find a four-byte integer type! */ -# endif -# endif -# endif -# endif /* STDC */ -#endif /* !NOBYFOUR */ - -/* Definitions for doing the crc four data bytes at a time. */ -#ifdef BYFOUR -# define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \ - (((w)&0xff00)<<8)+(((w)&0xff)<<24)) - local unsigned long crc32_little OF((unsigned long, - const unsigned char FAR *, unsigned)); - local unsigned long crc32_big OF((unsigned long, - const unsigned char FAR *, unsigned)); -# define TBLS 8 -#else -# define TBLS 1 -#endif /* BYFOUR */ - -/* Local functions for crc concatenation */ -local unsigned long gf2_matrix_times OF((unsigned long *mat, - unsigned long vec)); -local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat)); - -#ifdef DYNAMIC_CRC_TABLE - -local volatile int crc_table_empty = 1; -local unsigned long FAR crc_table[TBLS][256]; -local void make_crc_table OF((void)); -#ifdef MAKECRCH - local void write_table OF((FILE *, const unsigned long FAR *)); -#endif /* MAKECRCH */ -/* - Generate tables for a byte-wise 32-bit CRC calculation on the polynomial: - x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1. - - Polynomials over GF(2) are represented in binary, one bit per coefficient, - with the lowest powers in the most significant bit. Then adding polynomials - is just exclusive-or, and multiplying a polynomial by x is a right shift by - one. If we call the above polynomial p, and represent a byte as the - polynomial q, also with the lowest power in the most significant bit (so the - byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p, - where a mod b means the remainder after dividing a by b. - - This calculation is done using the shift-register method of multiplying and - taking the remainder. The register is initialized to zero, and for each - incoming bit, x^32 is added mod p to the register if the bit is a one (where - x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by - x (which is shifting right by one and adding x^32 mod p if the bit shifted - out is a one). We start with the highest power (least significant bit) of - q and repeat for all eight bits of q. - - The first table is simply the CRC of all possible eight bit values. This is - all the information needed to generate CRCs on data a byte at a time for all - combinations of CRC register values and incoming bytes. The remaining tables - allow for word-at-a-time CRC calculation for both big-endian and little- - endian machines, where a word is four bytes. -*/ -local void make_crc_table() -{ - unsigned long c; - int n, k; - unsigned long poly; /* polynomial exclusive-or pattern */ - /* terms of polynomial defining this crc (except x^32): */ - static volatile int first = 1; /* flag to limit concurrent making */ - static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26}; - - /* See if another task is already doing this (not thread-safe, but better - than nothing -- significantly reduces duration of vulnerability in - case the advice about DYNAMIC_CRC_TABLE is ignored) */ - if (first) { - first = 0; - - /* make exclusive-or pattern from polynomial (0xedb88320UL) */ - poly = 0UL; - for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++) - poly |= 1UL << (31 - p[n]); - - /* generate a crc for every 8-bit value */ - for (n = 0; n < 256; n++) { - c = (unsigned long)n; - for (k = 0; k < 8; k++) - c = c & 1 ? poly ^ (c >> 1) : c >> 1; - crc_table[0][n] = c; - } - -#ifdef BYFOUR - /* generate crc for each value followed by one, two, and three zeros, - and then the byte reversal of those as well as the first table */ - for (n = 0; n < 256; n++) { - c = crc_table[0][n]; - crc_table[4][n] = REV(c); - for (k = 1; k < 4; k++) { - c = crc_table[0][c & 0xff] ^ (c >> 8); - crc_table[k][n] = c; - crc_table[k + 4][n] = REV(c); - } - } -#endif /* BYFOUR */ - - crc_table_empty = 0; - } - else { /* not first */ - /* wait for the other guy to finish (not efficient, but rare) */ - while (crc_table_empty) - ; - } - -#ifdef MAKECRCH - /* write out CRC tables to crc32.h */ - { - FILE *out; - - out = fopen("crc32.h", "w"); - if (out == NULL) return; - fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n"); - fprintf(out, " * Generated automatically by crc32.c\n */\n\n"); - fprintf(out, "local const unsigned long FAR "); - fprintf(out, "crc_table[TBLS][256] =\n{\n {\n"); - write_table(out, crc_table[0]); -# ifdef BYFOUR - fprintf(out, "#ifdef BYFOUR\n"); - for (k = 1; k < 8; k++) { - fprintf(out, " },\n {\n"); - write_table(out, crc_table[k]); - } - fprintf(out, "#endif\n"); -# endif /* BYFOUR */ - fprintf(out, " }\n};\n"); - fclose(out); - } -#endif /* MAKECRCH */ -} - -#ifdef MAKECRCH -local void write_table(out, table) - FILE *out; - const unsigned long FAR *table; -{ - int n; - - for (n = 0; n < 256; n++) - fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : " ", table[n], - n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", ")); -} -#endif /* MAKECRCH */ - -#else /* !DYNAMIC_CRC_TABLE */ -/* ======================================================================== - * Tables of CRC-32s of all single-byte values, made by make_crc_table(). - */ -#include "crc32.h" -#endif /* DYNAMIC_CRC_TABLE */ - -/* ========================================================================= - * This function can be used by asm versions of crc32() - */ -const unsigned long FAR * ZEXPORT get_crc_table() -{ -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif /* DYNAMIC_CRC_TABLE */ - return (const unsigned long FAR *)crc_table; -} - -/* ========================================================================= */ -#define DO1 crc = crc_table[0][((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8) -#define DO8 DO1; DO1; DO1; DO1; DO1; DO1; DO1; DO1 - -/* ========================================================================= */ -unsigned long ZEXPORT crc32(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - if (buf == Z_NULL) return 0UL; - -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif /* DYNAMIC_CRC_TABLE */ - -#ifdef BYFOUR - if (sizeof(void *) == sizeof(ptrdiff_t)) { - u4 endian; - - endian = 1; - if (*((unsigned char *)(&endian))) - return crc32_little(crc, buf, len); - else - return crc32_big(crc, buf, len); - } -#endif /* BYFOUR */ - crc = crc ^ 0xffffffffUL; - while (len >= 8) { - DO8; - len -= 8; - } - if (len) do { - DO1; - } while (--len); - return crc ^ 0xffffffffUL; -} - -#ifdef BYFOUR - -/* ========================================================================= */ -#define DOLIT4 c ^= *buf4++; \ - c = crc_table[3][c & 0xff] ^ crc_table[2][(c >> 8) & 0xff] ^ \ - crc_table[1][(c >> 16) & 0xff] ^ crc_table[0][c >> 24] -#define DOLIT32 DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4; DOLIT4 - -/* ========================================================================= */ -local unsigned long crc32_little(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - register u4 c; - register const u4 FAR *buf4; - - c = (u4)crc; - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - len--; - } - - buf4 = (const u4 FAR *)(const void FAR *)buf; - while (len >= 32) { - DOLIT32; - len -= 32; - } - while (len >= 4) { - DOLIT4; - len -= 4; - } - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8); - } while (--len); - c = ~c; - return (unsigned long)c; -} - -/* ========================================================================= */ -#define DOBIG4 c ^= *++buf4; \ - c = crc_table[4][c & 0xff] ^ crc_table[5][(c >> 8) & 0xff] ^ \ - crc_table[6][(c >> 16) & 0xff] ^ crc_table[7][c >> 24] -#define DOBIG32 DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4; DOBIG4 - -/* ========================================================================= */ -local unsigned long crc32_big(crc, buf, len) - unsigned long crc; - const unsigned char FAR *buf; - unsigned len; -{ - register u4 c; - register const u4 FAR *buf4; - - c = REV((u4)crc); - c = ~c; - while (len && ((ptrdiff_t)buf & 3)) { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - len--; - } - - buf4 = (const u4 FAR *)(const void FAR *)buf; - buf4--; - while (len >= 32) { - DOBIG32; - len -= 32; - } - while (len >= 4) { - DOBIG4; - len -= 4; - } - buf4++; - buf = (const unsigned char FAR *)buf4; - - if (len) do { - c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8); - } while (--len); - c = ~c; - return (unsigned long)(REV(c)); -} - -#endif /* BYFOUR */ - -#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */ - -/* ========================================================================= */ -local unsigned long gf2_matrix_times(mat, vec) - unsigned long *mat; - unsigned long vec; -{ - unsigned long sum; - - sum = 0; - while (vec) { - if (vec & 1) - sum ^= *mat; - vec >>= 1; - mat++; - } - return sum; -} - -/* ========================================================================= */ -local void gf2_matrix_square(square, mat) - unsigned long *square; - unsigned long *mat; -{ - int n; - - for (n = 0; n < GF2_DIM; n++) - square[n] = gf2_matrix_times(mat, mat[n]); -} - -/* ========================================================================= */ -uLong ZEXPORT crc32_combine(crc1, crc2, len2) - uLong crc1; - uLong crc2; - z_off_t len2; -{ - int n; - unsigned long row; - unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */ - unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */ - - /* degenerate case */ - if (len2 == 0) - return crc1; - - /* put operator for one zero bit in odd */ - odd[0] = 0xedb88320L; /* CRC-32 polynomial */ - row = 1; - for (n = 1; n < GF2_DIM; n++) { - odd[n] = row; - row <<= 1; - } - - /* put operator for two zero bits in even */ - gf2_matrix_square(even, odd); - - /* put operator for four zero bits in odd */ - gf2_matrix_square(odd, even); - - /* apply len2 zeros to crc1 (first square will put the operator for one - zero byte, eight zero bits, in even) */ - do { - /* apply zeros operator for this bit of len2 */ - gf2_matrix_square(even, odd); - if (len2 & 1) - crc1 = gf2_matrix_times(even, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - if (len2 == 0) - break; - - /* another iteration of the loop with odd and even swapped */ - gf2_matrix_square(odd, even); - if (len2 & 1) - crc1 = gf2_matrix_times(odd, crc1); - len2 >>= 1; - - /* if no more bits set, then done */ - } while (len2 != 0); - - /* return combined crc */ - crc1 ^= crc2; - return crc1; -} diff --git a/lib/zlib/src/deflate.c b/lib/zlib/src/deflate.c deleted file mode 100644 index 3bb5ac4..0000000 --- a/lib/zlib/src/deflate.c +++ /dev/null @@ -1,1734 +0,0 @@ -/* deflate.c -- compress data using the deflation algorithm - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - * ALGORITHM - * - * The "deflation" process depends on being able to identify portions - * of the input text which are identical to earlier input (within a - * sliding window trailing behind the input currently being processed). - * - * The most straightforward technique turns out to be the fastest for - * most input files: try all possible matches and select the longest. - * The key feature of this algorithm is that insertions into the string - * dictionary are very simple and thus fast, and deletions are avoided - * completely. Insertions are performed at each input character, whereas - * string matches are performed only when the previous match ends. So it - * is preferable to spend more time in matches to allow very fast string - * insertions and avoid deletions. The matching algorithm for small - * strings is inspired from that of Rabin & Karp. A brute force approach - * is used to find longer strings when a small match has been found. - * A similar algorithm is used in comic (by Jan-Mark Wams) and freeze - * (by Leonid Broukhis). - * A previous version of this file used a more sophisticated algorithm - * (by Fiala and Greene) which is guaranteed to run in linear amortized - * time, but has a larger average cost, uses more memory and is patented. - * However the F&G algorithm may be faster for some highly redundant - * files if the parameter max_chain_length (described below) is too large. - * - * ACKNOWLEDGEMENTS - * - * The idea of lazy evaluation of matches is due to Jan-Mark Wams, and - * I found it in 'freeze' written by Leonid Broukhis. - * Thanks to many people for bug reports and testing. - * - * REFERENCES - * - * Deutsch, L.P.,"DEFLATE Compressed Data Format Specification". - * Available in http://www.ietf.org/rfc/rfc1951.txt - * - * A description of the Rabin and Karp algorithm is given in the book - * "Algorithms" by R. Sedgewick, Addison-Wesley, p252. - * - * Fiala,E.R., and Greene,D.H. - * Data Compression with Finite Windows, Comm.ACM, 32,4 (1989) 490-595 - * - */ - -#include "deflate.h" - -const char deflate_copyright[] = - " deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* =========================================================================== - * Function prototypes. - */ -typedef enum { - need_more, /* block not completed, need more input or more output */ - block_done, /* block flush performed */ - finish_started, /* finish started, need only more output at next deflate */ - finish_done /* finish done, accept no more input or output */ -} block_state; - -typedef block_state (*compress_func) OF((deflate_state *s, int flush)); -/* Compression function. Returns the block state after the call. */ - -local void fill_window OF((deflate_state *s)); -local block_state deflate_stored OF((deflate_state *s, int flush)); -local block_state deflate_fast OF((deflate_state *s, int flush)); -#ifndef FASTEST -local block_state deflate_slow OF((deflate_state *s, int flush)); -#endif -local void lm_init OF((deflate_state *s)); -local void putShortMSB OF((deflate_state *s, uInt b)); -local void flush_pending OF((z_streamp strm)); -local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size)); -#ifndef FASTEST -#ifdef ASMV - void match_init OF((void)); /* asm code initialization */ - uInt longest_match OF((deflate_state *s, IPos cur_match)); -#else -local uInt longest_match OF((deflate_state *s, IPos cur_match)); -#endif -#endif -local uInt longest_match_fast OF((deflate_state *s, IPos cur_match)); - -#ifdef DEBUG -local void check_match OF((deflate_state *s, IPos start, IPos match, - int length)); -#endif - -/* =========================================================================== - * Local data - */ - -#define NIL 0 -/* Tail of hash chains */ - -#ifndef TOO_FAR -# define TOO_FAR 4096 -#endif -/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */ - -#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1) -/* Minimum amount of lookahead, except at the end of the input file. - * See deflate.c for comments about the MIN_MATCH+1. - */ - -/* Values for max_lazy_match, good_match and max_chain_length, depending on - * the desired pack level (0..9). The values given below have been tuned to - * exclude worst case performance for pathological files. Better values may be - * found for specific files. - */ -typedef struct config_s { - ush good_length; /* reduce lazy search above this match length */ - ush max_lazy; /* do not perform lazy search above this match length */ - ush nice_length; /* quit search above this match length */ - ush max_chain; - compress_func func; -} config; - -#ifdef FASTEST -local const config configuration_table[2] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}}; /* max speed, no lazy matches */ -#else -local const config configuration_table[10] = { -/* good lazy nice chain */ -/* 0 */ {0, 0, 0, 0, deflate_stored}, /* store only */ -/* 1 */ {4, 4, 8, 4, deflate_fast}, /* max speed, no lazy matches */ -/* 2 */ {4, 5, 16, 8, deflate_fast}, -/* 3 */ {4, 6, 32, 32, deflate_fast}, - -/* 4 */ {4, 4, 16, 16, deflate_slow}, /* lazy matches */ -/* 5 */ {8, 16, 32, 32, deflate_slow}, -/* 6 */ {8, 16, 128, 128, deflate_slow}, -/* 7 */ {8, 32, 128, 256, deflate_slow}, -/* 8 */ {32, 128, 258, 1024, deflate_slow}, -/* 9 */ {32, 258, 258, 4096, deflate_slow}}; /* max compression */ -#endif - -/* Note: the deflate() code requires max_lazy >= MIN_MATCH and max_chain >= 4 - * For deflate_fast() (levels <= 3) good is ignored and lazy has a different - * meaning. - */ - -#define EQUAL 0 -/* result of memcmp for equal strings */ - -#ifndef NO_DUMMY_DECL -struct static_tree_desc_s {int dummy;}; /* for buggy compilers */ -#endif - -/* =========================================================================== - * Update a hash value with the given input byte - * IN assertion: all calls to to UPDATE_HASH are made with consecutive - * input characters, so that a running hash key can be computed from the - * previous key instead of complete recalculation each time. - */ -#define UPDATE_HASH(s,h,c) (h = (((h)<<s->hash_shift) ^ (c)) & s->hash_mask) - - -/* =========================================================================== - * Insert string str in the dictionary and set match_head to the previous head - * of the hash chain (the most recent string with same hash key). Return - * the previous length of the hash chain. - * If this file is compiled with -DFASTEST, the compression level is forced - * to 1, and no hash chains are maintained. - * IN assertion: all calls to to INSERT_STRING are made with consecutive - * input characters and the first MIN_MATCH bytes of str are valid - * (except for the last MIN_MATCH-1 bytes of the input file). - */ -#ifdef FASTEST -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - match_head = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) -#else -#define INSERT_STRING(s, str, match_head) \ - (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \ - match_head = s->prev[(str) & s->w_mask] = s->head[s->ins_h], \ - s->head[s->ins_h] = (Pos)(str)) -#endif - -/* =========================================================================== - * Initialize the hash table (avoiding 64K overflow for 16 bit systems). - * prev[] will be initialized on the fly. - */ -#define CLEAR_HASH(s) \ - s->head[s->hash_size-1] = NIL; \ - zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head)); - -/* ========================================================================= */ -int ZEXPORT deflateInit_(strm, level, version, stream_size) - z_streamp strm; - int level; - const char *version; - int stream_size; -{ - return deflateInit2_(strm, level, Z_DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, - Z_DEFAULT_STRATEGY, version, stream_size); - /* To do: ignore strm->next_in if we use it as window */ -} - -/* ========================================================================= */ -int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy, - version, stream_size) - z_streamp strm; - int level; - int method; - int windowBits; - int memLevel; - int strategy; - const char *version; - int stream_size; -{ - deflate_state *s; - int wrap = 1; - static const char my_version[] = ZLIB_VERSION; - - ushf *overlay; - /* We overlay pending_buf and d_buf+l_buf. This works since the average - * output size for (length,distance) codes is <= 24 bits. - */ - - if (version == Z_NULL || version[0] != my_version[0] || - stream_size != sizeof(z_stream)) { - return Z_VERSION_ERROR; - } - if (strm == Z_NULL) return Z_STREAM_ERROR; - - strm->msg = Z_NULL; - if (strm->zalloc == (alloc_func)0) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; - -#ifdef FASTEST - if (level != 0) level = 1; -#else - if (level == Z_DEFAULT_COMPRESSION) level = 6; -#endif - - if (windowBits < 0) { /* suppress zlib wrapper */ - wrap = 0; - windowBits = -windowBits; - } -#ifdef GZIP - else if (windowBits > 15) { - wrap = 2; /* write gzip wrapper instead */ - windowBits -= 16; - } -#endif - if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED || - windowBits < 8 || windowBits > 15 || level < 0 || level > 9 || - strategy < 0 || strategy > Z_FIXED) { - return Z_STREAM_ERROR; - } - if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */ - s = (deflate_state *) ZALLOC(strm, 1, sizeof(deflate_state)); - if (s == Z_NULL) return Z_MEM_ERROR; - strm->state = (struct internal_state FAR *)s; - s->strm = strm; - - s->wrap = wrap; - s->gzhead = Z_NULL; - s->w_bits = windowBits; - s->w_size = 1 << s->w_bits; - s->w_mask = s->w_size - 1; - - s->hash_bits = memLevel + 7; - s->hash_size = 1 << s->hash_bits; - s->hash_mask = s->hash_size - 1; - s->hash_shift = ((s->hash_bits+MIN_MATCH-1)/MIN_MATCH); - - s->window = (Bytef *) ZALLOC(strm, s->w_size, 2*sizeof(Byte)); - s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos)); - s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos)); - - s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */ - - overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2); - s->pending_buf = (uchf *) overlay; - s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L); - - if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL || - s->pending_buf == Z_NULL) { - s->status = FINISH_STATE; - strm->msg = (char*)ERR_MSG(Z_MEM_ERROR); - deflateEnd (strm); - return Z_MEM_ERROR; - } - s->d_buf = overlay + s->lit_bufsize/sizeof(ush); - s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize; - - s->level = level; - s->strategy = strategy; - s->method = (Byte)method; - - return deflateReset(strm); -} - -/* ========================================================================= */ -int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength) - z_streamp strm; - const Bytef *dictionary; - uInt dictLength; -{ - deflate_state *s; - uInt length = dictLength; - uInt n; - IPos hash_head = 0; - - if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL || - strm->state->wrap == 2 || - (strm->state->wrap == 1 && strm->state->status != INIT_STATE)) - return Z_STREAM_ERROR; - - s = strm->state; - if (s->wrap) - strm->adler = adler32(strm->adler, dictionary, dictLength); - - if (length < MIN_MATCH) return Z_OK; - if (length > MAX_DIST(s)) { - length = MAX_DIST(s); - dictionary += dictLength - length; /* use the tail of the dictionary */ - } - zmemcpy(s->window, dictionary, length); - s->strstart = length; - s->block_start = (long)length; - - /* Insert all strings in the hash table (except for the last two bytes). - * s->lookahead stays null, so s->ins_h will be recomputed at the next - * call of fill_window. - */ - s->ins_h = s->window[0]; - UPDATE_HASH(s, s->ins_h, s->window[1]); - for (n = 0; n <= length - MIN_MATCH; n++) { - INSERT_STRING(s, n, hash_head); - } - if (hash_head) hash_head = 0; /* to make compiler happy */ - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateReset (strm) - z_streamp strm; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - strm->zalloc == (alloc_func)0 || strm->zfree == (free_func)0) { - return Z_STREAM_ERROR; - } - - strm->total_in = strm->total_out = 0; - strm->msg = Z_NULL; /* use zfree if we ever allocate msg dynamically */ - strm->data_type = Z_UNKNOWN; - - s = (deflate_state *)strm->state; - s->pending = 0; - s->pending_out = s->pending_buf; - - if (s->wrap < 0) { - s->wrap = -s->wrap; /* was made negative by deflate(..., Z_FINISH); */ - } - s->status = s->wrap ? INIT_STATE : BUSY_STATE; - strm->adler = -#ifdef GZIP - s->wrap == 2 ? crc32(0L, Z_NULL, 0) : -#endif - adler32(0L, Z_NULL, 0); - s->last_flush = Z_NO_FLUSH; - - _tr_init(s); - lm_init(s); - - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateSetHeader (strm, head) - z_streamp strm; - gz_headerp head; -{ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - if (strm->state->wrap != 2) return Z_STREAM_ERROR; - strm->state->gzhead = head; - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflatePrime (strm, bits, value) - z_streamp strm; - int bits; - int value; -{ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - strm->state->bi_valid = bits; - strm->state->bi_buf = (ush)(value & ((1 << bits) - 1)); - return Z_OK; -} - -/* ========================================================================= */ -int ZEXPORT deflateParams(strm, level, strategy) - z_streamp strm; - int level; - int strategy; -{ - deflate_state *s; - compress_func func; - int err = Z_OK; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - -#ifdef FASTEST - if (level != 0) level = 1; -#else - if (level == Z_DEFAULT_COMPRESSION) level = 6; -#endif - if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) { - return Z_STREAM_ERROR; - } - func = configuration_table[s->level].func; - - if (func != configuration_table[level].func && strm->total_in != 0) { - /* Flush the last buffer: */ - err = deflate(strm, Z_PARTIAL_FLUSH); - } - if (s->level != level) { - s->level = level; - s->max_lazy_match = configuration_table[level].max_lazy; - s->good_match = configuration_table[level].good_length; - s->nice_match = configuration_table[level].nice_length; - s->max_chain_length = configuration_table[level].max_chain; - } - s->strategy = strategy; - return err; -} - -/* ========================================================================= */ -int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain) - z_streamp strm; - int good_length; - int max_lazy; - int nice_length; - int max_chain; -{ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - s = strm->state; - s->good_match = good_length; - s->max_lazy_match = max_lazy; - s->nice_match = nice_length; - s->max_chain_length = max_chain; - return Z_OK; -} - -/* ========================================================================= - * For the default windowBits of 15 and memLevel of 8, this function returns - * a close to exact, as well as small, upper bound on the compressed size. - * They are coded as constants here for a reason--if the #define's are - * changed, then this function needs to be changed as well. The return - * value for 15 and 8 only works for those exact settings. - * - * For any setting other than those defaults for windowBits and memLevel, - * the value returned is a conservative worst case for the maximum expansion - * resulting from using fixed blocks instead of stored blocks, which deflate - * can emit on compressed data for some combinations of the parameters. - * - * This function could be more sophisticated to provide closer upper bounds - * for every combination of windowBits and memLevel, as well as wrap. - * But even the conservative upper bound of about 14% expansion does not - * seem onerous for output buffer allocation. - */ -uLong ZEXPORT deflateBound(strm, sourceLen) - z_streamp strm; - uLong sourceLen; -{ - deflate_state *s; - uLong destLen; - - /* conservative upper bound */ - destLen = sourceLen + - ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11; - - /* if can't get parameters, return conservative bound */ - if (strm == Z_NULL || strm->state == Z_NULL) - return destLen; - - /* if not default parameters, return conservative bound */ - s = strm->state; - if (s->w_bits != 15 || s->hash_bits != 8 + 7) - return destLen; - - /* default settings: return tight bound for that case */ - return compressBound(sourceLen); -} - -/* ========================================================================= - * Put a short in the pending buffer. The 16-bit value is put in MSB order. - * IN assertion: the stream state is correct and there is enough room in - * pending_buf. - */ -local void putShortMSB (s, b) - deflate_state *s; - uInt b; -{ - put_byte(s, (Byte)(b >> 8)); - put_byte(s, (Byte)(b & 0xff)); -} - -/* ========================================================================= - * Flush as much pending output as possible. All deflate() output goes - * through this function so some applications may wish to modify it - * to avoid allocating a large strm->next_out buffer and copying into it. - * (See also read_buf()). - */ -local void flush_pending(strm) - z_streamp strm; -{ - unsigned len = strm->state->pending; - - if (len > strm->avail_out) len = strm->avail_out; - if (len == 0) return; - - zmemcpy(strm->next_out, strm->state->pending_out, len); - strm->next_out += len; - strm->state->pending_out += len; - strm->total_out += len; - strm->avail_out -= len; - strm->state->pending -= len; - if (strm->state->pending == 0) { - strm->state->pending_out = strm->state->pending_buf; - } -} - -/* ========================================================================= */ -int ZEXPORT deflate (strm, flush) - z_streamp strm; - int flush; -{ - int old_flush; /* value of flush param for previous deflate call */ - deflate_state *s; - - if (strm == Z_NULL || strm->state == Z_NULL || - flush > Z_FINISH || flush < 0) { - return Z_STREAM_ERROR; - } - s = strm->state; - - if (strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0) || - (s->status == FINISH_STATE && flush != Z_FINISH)) { - ERR_RETURN(strm, Z_STREAM_ERROR); - } - if (strm->avail_out == 0) ERR_RETURN(strm, Z_BUF_ERROR); - - s->strm = strm; /* just in case */ - old_flush = s->last_flush; - s->last_flush = flush; - - /* Write the header */ - if (s->status == INIT_STATE) { -#ifdef GZIP - if (s->wrap == 2) { - strm->adler = crc32(0L, Z_NULL, 0); - put_byte(s, 31); - put_byte(s, 139); - put_byte(s, 8); - if (s->gzhead == NULL) { - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, 0); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, OS_CODE); - s->status = BUSY_STATE; - } - else { - put_byte(s, (s->gzhead->text ? 1 : 0) + - (s->gzhead->hcrc ? 2 : 0) + - (s->gzhead->extra == Z_NULL ? 0 : 4) + - (s->gzhead->name == Z_NULL ? 0 : 8) + - (s->gzhead->comment == Z_NULL ? 0 : 16) - ); - put_byte(s, (Byte)(s->gzhead->time & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff)); - put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff)); - put_byte(s, s->level == 9 ? 2 : - (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ? - 4 : 0)); - put_byte(s, s->gzhead->os & 0xff); - if (s->gzhead->extra != NULL) { - put_byte(s, s->gzhead->extra_len & 0xff); - put_byte(s, (s->gzhead->extra_len >> 8) & 0xff); - } - if (s->gzhead->hcrc) - strm->adler = crc32(strm->adler, s->pending_buf, - s->pending); - s->gzindex = 0; - s->status = EXTRA_STATE; - } - } - else -#endif - { - uInt header = (Z_DEFLATED + ((s->w_bits-8)<<4)) << 8; - uInt level_flags; - - if (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2) - level_flags = 0; - else if (s->level < 6) - level_flags = 1; - else if (s->level == 6) - level_flags = 2; - else - level_flags = 3; - header |= (level_flags << 6); - if (s->strstart != 0) header |= PRESET_DICT; - header += 31 - (header % 31); - - s->status = BUSY_STATE; - putShortMSB(s, header); - - /* Save the adler32 of the preset dictionary: */ - if (s->strstart != 0) { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - strm->adler = adler32(0L, Z_NULL, 0); - } - } -#ifdef GZIP - if (s->status == EXTRA_STATE) { - if (s->gzhead->extra != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - - while (s->gzindex < (s->gzhead->extra_len & 0xffff)) { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) - break; - } - put_byte(s, s->gzhead->extra[s->gzindex]); - s->gzindex++; - } - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (s->gzindex == s->gzhead->extra_len) { - s->gzindex = 0; - s->status = NAME_STATE; - } - } - else - s->status = NAME_STATE; - } - if (s->status == NAME_STATE) { - if (s->gzhead->name != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - int val; - - do { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) { - val = 1; - break; - } - } - val = s->gzhead->name[s->gzindex++]; - put_byte(s, val); - } while (val != 0); - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (val == 0) { - s->gzindex = 0; - s->status = COMMENT_STATE; - } - } - else - s->status = COMMENT_STATE; - } - if (s->status == COMMENT_STATE) { - if (s->gzhead->comment != NULL) { - uInt beg = s->pending; /* start of bytes to update crc */ - int val; - - do { - if (s->pending == s->pending_buf_size) { - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - flush_pending(strm); - beg = s->pending; - if (s->pending == s->pending_buf_size) { - val = 1; - break; - } - } - val = s->gzhead->comment[s->gzindex++]; - put_byte(s, val); - } while (val != 0); - if (s->gzhead->hcrc && s->pending > beg) - strm->adler = crc32(strm->adler, s->pending_buf + beg, - s->pending - beg); - if (val == 0) - s->status = HCRC_STATE; - } - else - s->status = HCRC_STATE; - } - if (s->status == HCRC_STATE) { - if (s->gzhead->hcrc) { - if (s->pending + 2 > s->pending_buf_size) - flush_pending(strm); - if (s->pending + 2 <= s->pending_buf_size) { - put_byte(s, (Byte)(strm->adler & 0xff)); - put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); - strm->adler = crc32(0L, Z_NULL, 0); - s->status = BUSY_STATE; - } - } - else - s->status = BUSY_STATE; - } -#endif - - /* Flush as much pending output as possible */ - if (s->pending != 0) { - flush_pending(strm); - if (strm->avail_out == 0) { - /* Since avail_out is 0, deflate will be called again with - * more output space, but possibly with both pending and - * avail_in equal to zero. There won't be anything to do, - * but this is not an error situation so make sure we - * return OK instead of BUF_ERROR at next call of deflate: - */ - s->last_flush = -1; - return Z_OK; - } - - /* Make sure there is something to do and avoid duplicate consecutive - * flushes. For repeated and useless calls with Z_FINISH, we keep - * returning Z_STREAM_END instead of Z_BUF_ERROR. - */ - } else if (strm->avail_in == 0 && flush <= old_flush && - flush != Z_FINISH) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* User must not provide more input after the first FINISH: */ - if (s->status == FINISH_STATE && strm->avail_in != 0) { - ERR_RETURN(strm, Z_BUF_ERROR); - } - - /* Start a new block or continue the current one. - */ - if (strm->avail_in != 0 || s->lookahead != 0 || - (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) { - block_state bstate; - - bstate = (*(configuration_table[s->level].func))(s, flush); - - if (bstate == finish_started || bstate == finish_done) { - s->status = FINISH_STATE; - } - if (bstate == need_more || bstate == finish_started) { - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR next call, see above */ - } - return Z_OK; - /* If flush != Z_NO_FLUSH && avail_out == 0, the next call - * of deflate should use the same flush parameter to make sure - * that the flush is complete. So we don't have to output an - * empty block here, this will be done at next call. This also - * ensures that for a very small output buffer, we emit at most - * one empty block. - */ - } - if (bstate == block_done) { - if (flush == Z_PARTIAL_FLUSH) { - _tr_align(s); - } else { /* FULL_FLUSH or SYNC_FLUSH */ - _tr_stored_block(s, (char*)0, 0L, 0); - /* For a full flush, this empty block will be recognized - * as a special marker by inflate_sync(). - */ - if (flush == Z_FULL_FLUSH) { - CLEAR_HASH(s); /* forget history */ - } - } - flush_pending(strm); - if (strm->avail_out == 0) { - s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */ - return Z_OK; - } - } - } - Assert(strm->avail_out > 0, "bug2"); - - if (flush != Z_FINISH) return Z_OK; - if (s->wrap <= 0) return Z_STREAM_END; - - /* Write the trailer */ -#ifdef GZIP - if (s->wrap == 2) { - put_byte(s, (Byte)(strm->adler & 0xff)); - put_byte(s, (Byte)((strm->adler >> 8) & 0xff)); - put_byte(s, (Byte)((strm->adler >> 16) & 0xff)); - put_byte(s, (Byte)((strm->adler >> 24) & 0xff)); - put_byte(s, (Byte)(strm->total_in & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 8) & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 16) & 0xff)); - put_byte(s, (Byte)((strm->total_in >> 24) & 0xff)); - } - else -#endif - { - putShortMSB(s, (uInt)(strm->adler >> 16)); - putShortMSB(s, (uInt)(strm->adler & 0xffff)); - } - flush_pending(strm); - /* If avail_out is zero, the application will call deflate again - * to flush the rest. - */ - if (s->wrap > 0) s->wrap = -s->wrap; /* write the trailer only once! */ - return s->pending != 0 ? Z_OK : Z_STREAM_END; -} - -/* ========================================================================= */ -int ZEXPORT deflateEnd (strm) - z_streamp strm; -{ - int status; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - - status = strm->state->status; - if (status != INIT_STATE && - status != EXTRA_STATE && - status != NAME_STATE && - status != COMMENT_STATE && - status != HCRC_STATE && - status != BUSY_STATE && - status != FINISH_STATE) { - return Z_STREAM_ERROR; - } - - /* Deallocate in reverse order of allocations: */ - TRY_FREE(strm, strm->state->pending_buf); - TRY_FREE(strm, strm->state->head); - TRY_FREE(strm, strm->state->prev); - TRY_FREE(strm, strm->state->window); - - ZFREE(strm, strm->state); - strm->state = Z_NULL; - - return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK; -} - -/* ========================================================================= - * Copy the source state to the destination state. - * To simplify the source, this is not supported for 16-bit MSDOS (which - * doesn't have enough memory anyway to duplicate compression states). - */ -int ZEXPORT deflateCopy (dest, source) - z_streamp dest; - z_streamp source; -{ -#ifdef MAXSEG_64K - return Z_STREAM_ERROR; -#else - deflate_state *ds; - deflate_state *ss; - ushf *overlay; - - - if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) { - return Z_STREAM_ERROR; - } - - ss = source->state; - - zmemcpy(dest, source, sizeof(z_stream)); - - ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state)); - if (ds == Z_NULL) return Z_MEM_ERROR; - dest->state = (struct internal_state FAR *) ds; - zmemcpy(ds, ss, sizeof(deflate_state)); - ds->strm = dest; - - ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte)); - ds->prev = (Posf *) ZALLOC(dest, ds->w_size, sizeof(Pos)); - ds->head = (Posf *) ZALLOC(dest, ds->hash_size, sizeof(Pos)); - overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2); - ds->pending_buf = (uchf *) overlay; - - if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL || - ds->pending_buf == Z_NULL) { - deflateEnd (dest); - return Z_MEM_ERROR; - } - /* following zmemcpy do not work for 16-bit MSDOS */ - zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte)); - zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos)); - zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos)); - zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size); - - ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf); - ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush); - ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize; - - ds->l_desc.dyn_tree = ds->dyn_ltree; - ds->d_desc.dyn_tree = ds->dyn_dtree; - ds->bl_desc.dyn_tree = ds->bl_tree; - - return Z_OK; -#endif /* MAXSEG_64K */ -} - -/* =========================================================================== - * Read a new buffer from the current input stream, update the adler32 - * and total number of bytes read. All deflate() input goes through - * this function so some applications may wish to modify it to avoid - * allocating a large strm->next_in buffer and copying from it. - * (See also flush_pending()). - */ -local int read_buf(strm, buf, size) - z_streamp strm; - Bytef *buf; - unsigned size; -{ - unsigned len = strm->avail_in; - - if (len > size) len = size; - if (len == 0) return 0; - - strm->avail_in -= len; - - if (strm->state->wrap == 1) { - strm->adler = adler32(strm->adler, strm->next_in, len); - } -#ifdef GZIP - else if (strm->state->wrap == 2) { - strm->adler = crc32(strm->adler, strm->next_in, len); - } -#endif - zmemcpy(buf, strm->next_in, len); - strm->next_in += len; - strm->total_in += len; - - return (int)len; -} - -/* =========================================================================== - * Initialize the "longest match" routines for a new zlib stream - */ -local void lm_init (s) - deflate_state *s; -{ - s->window_size = (ulg)2L*s->w_size; - - CLEAR_HASH(s); - - /* Set the default configuration parameters: - */ - s->max_lazy_match = configuration_table[s->level].max_lazy; - s->good_match = configuration_table[s->level].good_length; - s->nice_match = configuration_table[s->level].nice_length; - s->max_chain_length = configuration_table[s->level].max_chain; - - s->strstart = 0; - s->block_start = 0L; - s->lookahead = 0; - s->match_length = s->prev_length = MIN_MATCH-1; - s->match_available = 0; - s->ins_h = 0; -#ifndef FASTEST -#ifdef ASMV - match_init(); /* initialize the asm code */ -#endif -#endif -} - -#ifndef FASTEST -/* =========================================================================== - * Set match_start to the longest match starting at the given string and - * return its length. Matches shorter or equal to prev_length are discarded, - * in which case the result is equal to prev_length and match_start is - * garbage. - * IN assertions: cur_match is the head of the hash chain for the current - * string (strstart) and its distance is <= MAX_DIST, and prev_length >= 1 - * OUT assertion: the match length is not greater than s->lookahead. - */ -#ifndef ASMV -/* For 80x86 and 680x0, an optimized version will be provided in match.asm or - * match.S. The code will be functionally equivalent. - */ -local uInt longest_match(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - unsigned chain_length = s->max_chain_length;/* max hash chain length */ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - int best_len = s->prev_length; /* best match length so far */ - int nice_match = s->nice_match; /* stop if match long enough */ - IPos limit = s->strstart > (IPos)MAX_DIST(s) ? - s->strstart - (IPos)MAX_DIST(s) : NIL; - /* Stop when cur_match becomes <= limit. To simplify the code, - * we prevent matches with the string of window index 0. - */ - Posf *prev = s->prev; - uInt wmask = s->w_mask; - -#ifdef UNALIGNED_OK - /* Compare two bytes at a time. Note: this is not always beneficial. - * Try with and without -DUNALIGNED_OK to check. - */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1; - register ush scan_start = *(ushf*)scan; - register ush scan_end = *(ushf*)(scan+best_len-1); -#else - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - register Byte scan_end1 = scan[best_len-1]; - register Byte scan_end = scan[best_len]; -#endif - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - /* Do not waste too much time if we already have a good match: */ - if (s->prev_length >= s->good_match) { - chain_length >>= 2; - } - /* Do not look for matches beyond the end of the input. This is necessary - * to make deflate deterministic. - */ - if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - do { - Assert(cur_match < s->strstart, "no future"); - match = s->window + cur_match; - - /* Skip to next match if the match length cannot increase - * or if the match length is less than 2. Note that the checks below - * for insufficient lookahead only occur occasionally for performance - * reasons. Therefore uninitialized memory will be accessed, and - * conditional jumps will be made that depend on those values. - * However the length of the match is limited to the lookahead, so - * the output of deflate is not affected by the uninitialized values. - */ -#if (defined(UNALIGNED_OK) && MAX_MATCH == 258) - /* This code assumes sizeof(unsigned short) == 2. Do not use - * UNALIGNED_OK if your compiler uses a different size. - */ - if (*(ushf*)(match+best_len-1) != scan_end || - *(ushf*)match != scan_start) continue; - - /* It is not necessary to compare scan[2] and match[2] since they are - * always equal when the other bytes match, given that the hash keys - * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at - * strstart+3, +5, ... up to strstart+257. We check for insufficient - * lookahead only every 4th comparison; the 128th check will be made - * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is - * necessary to put more guard bytes at the end of the window, or - * to check more often for insufficient lookahead. - */ - Assert(scan[2] == match[2], "scan[2]?"); - scan++, match++; - do { - } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - *(ushf*)(scan+=2) == *(ushf*)(match+=2) && - scan < strend); - /* The funny "do {}" generates better code on most compilers */ - - /* Here, scan <= window+strstart+257 */ - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - if (*scan == *match) scan++; - - len = (MAX_MATCH - 1) - (int)(strend-scan); - scan = strend - (MAX_MATCH-1); - -#else /* UNALIGNED_OK */ - - if (match[best_len] != scan_end || - match[best_len-1] != scan_end1 || - *match != *scan || - *++match != scan[1]) continue; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match++; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - scan = strend - MAX_MATCH; - -#endif /* UNALIGNED_OK */ - - if (len > best_len) { - s->match_start = cur_match; - best_len = len; - if (len >= nice_match) break; -#ifdef UNALIGNED_OK - scan_end = *(ushf*)(scan+best_len-1); -#else - scan_end1 = scan[best_len-1]; - scan_end = scan[best_len]; -#endif - } - } while ((cur_match = prev[cur_match & wmask]) > limit - && --chain_length != 0); - - if ((uInt)best_len <= s->lookahead) return (uInt)best_len; - return s->lookahead; -} -#endif /* ASMV */ -#endif /* FASTEST */ - -/* --------------------------------------------------------------------------- - * Optimized version for level == 1 or strategy == Z_RLE only - */ -local uInt longest_match_fast(s, cur_match) - deflate_state *s; - IPos cur_match; /* current match */ -{ - register Bytef *scan = s->window + s->strstart; /* current string */ - register Bytef *match; /* matched string */ - register int len; /* length of current match */ - register Bytef *strend = s->window + s->strstart + MAX_MATCH; - - /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ - Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); - - Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead"); - - Assert(cur_match < s->strstart, "no future"); - - match = s->window + cur_match; - - /* Return failure if the match length is less than 2: - */ - if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1; - - /* The check at best_len-1 can be removed because it will be made - * again later. (This heuristic is not always a win.) - * It is not necessary to compare scan[2] and match[2] since they - * are always equal when the other bytes match, given that - * the hash keys are equal and that HASH_BITS >= 8. - */ - scan += 2, match += 2; - Assert(*scan == *match, "match[2]?"); - - /* We check for insufficient lookahead only every 8th comparison; - * the 256th check will be made at strstart+258. - */ - do { - } while (*++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - *++scan == *++match && *++scan == *++match && - scan < strend); - - Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan"); - - len = MAX_MATCH - (int)(strend - scan); - - if (len < MIN_MATCH) return MIN_MATCH - 1; - - s->match_start = cur_match; - return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead; -} - -#ifdef DEBUG -/* =========================================================================== - * Check that the match at match_start is indeed a match. - */ -local void check_match(s, start, match, length) - deflate_state *s; - IPos start, match; - int length; -{ - /* check that the match is indeed a match */ - if (zmemcmp(s->window + match, - s->window + start, length) != EQUAL) { - fprintf(stderr, " start %u, match %u, length %d\n", - start, match, length); - do { - fprintf(stderr, "%c%c", s->window[match++], s->window[start++]); - } while (--length != 0); - z_error("invalid match"); - } - if (z_verbose > 1) { - fprintf(stderr,"\\[%d,%d]", start-match, length); - do { putc(s->window[start++], stderr); } while (--length != 0); - } -} -#else -# define check_match(s, start, match, length) -#endif /* DEBUG */ - -/* =========================================================================== - * Fill the window when the lookahead becomes insufficient. - * Updates strstart and lookahead. - * - * IN assertion: lookahead < MIN_LOOKAHEAD - * OUT assertions: strstart <= window_size-MIN_LOOKAHEAD - * At least one byte has been read, or avail_in == 0; reads are - * performed for at least two bytes (required for the zip translate_eol - * option -- not supported here). - */ -local void fill_window(s) - deflate_state *s; -{ - register unsigned n, m; - register Posf *p; - unsigned more; /* Amount of free space at the end of the window. */ - uInt wsize = s->w_size; - - do { - more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart); - - /* Deal with !@#$% 64K limit: */ - if (sizeof(int) <= 2) { - if (more == 0 && s->strstart == 0 && s->lookahead == 0) { - more = wsize; - - } else if (more == (unsigned)(-1)) { - /* Very unlikely, but possible on 16 bit machine if - * strstart == 0 && lookahead == 1 (input done a byte at time) - */ - more--; - } - } - - /* If the window is almost full and there is insufficient lookahead, - * move the upper half to the lower one to make room in the upper half. - */ - if (s->strstart >= wsize+MAX_DIST(s)) { - - zmemcpy(s->window, s->window+wsize, (unsigned)wsize); - s->match_start -= wsize; - s->strstart -= wsize; /* we now have strstart >= MAX_DIST */ - s->block_start -= (long) wsize; - - /* Slide the hash table (could be avoided with 32 bit values - at the expense of memory usage). We slide even when level == 0 - to keep the hash table consistent if we switch back to level > 0 - later. (Using level 0 permanently is not an optimal usage of - zlib, so we don't care about this pathological case.) - */ - /* %%% avoid this when Z_RLE */ - n = s->hash_size; - p = &s->head[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - } while (--n); - - n = wsize; -#ifndef FASTEST - p = &s->prev[n]; - do { - m = *--p; - *p = (Pos)(m >= wsize ? m-wsize : NIL); - /* If n is not on any hash chain, prev[n] is garbage but - * its value will never be used. - */ - } while (--n); -#endif - more += wsize; - } - if (s->strm->avail_in == 0) return; - - /* If there was no sliding: - * strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 && - * more == window_size - lookahead - strstart - * => more >= window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) - * => more >= window_size - 2*WSIZE + 2 - * In the BIG_MEM or MMAP case (not yet supported), - * window_size == input_size + MIN_LOOKAHEAD && - * strstart + s->lookahead <= input_size => more >= MIN_LOOKAHEAD. - * Otherwise, window_size == 2*WSIZE so more >= 2. - * If there was sliding, more >= WSIZE. So in all cases, more >= 2. - */ - Assert(more >= 2, "more < 2"); - - n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more); - s->lookahead += n; - - /* Initialize the hash value now that we have some input: */ - if (s->lookahead >= MIN_MATCH) { - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - } - /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage, - * but this is not important since only literal bytes will be emitted. - */ - - } while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0); -} - -/* =========================================================================== - * Flush the current block, with given end-of-file flag. - * IN assertion: strstart is set to the end of the current match. - */ -#define FLUSH_BLOCK_ONLY(s, eof) { \ - _tr_flush_block(s, (s->block_start >= 0L ? \ - (charf *)&s->window[(unsigned)s->block_start] : \ - (charf *)Z_NULL), \ - (ulg)((long)s->strstart - s->block_start), \ - (eof)); \ - s->block_start = s->strstart; \ - flush_pending(s->strm); \ - Tracev((stderr,"[FLUSH]")); \ -} - -/* Same but force premature exit if necessary. */ -#define FLUSH_BLOCK(s, eof) { \ - FLUSH_BLOCK_ONLY(s, eof); \ - if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \ -} - -/* =========================================================================== - * Copy without compression as much as possible from the input stream, return - * the current block state. - * This function does not insert new strings in the dictionary since - * uncompressible data is probably not useful. This function is used - * only for the level=0 compression option. - * NOTE: this function should be optimized to avoid extra copying from - * window to pending_buf. - */ -local block_state deflate_stored(s, flush) - deflate_state *s; - int flush; -{ - /* Stored blocks are limited to 0xffff bytes, pending_buf is limited - * to pending_buf_size, and each stored block has a 5 byte header: - */ - ulg max_block_size = 0xffff; - ulg max_start; - - if (max_block_size > s->pending_buf_size - 5) { - max_block_size = s->pending_buf_size - 5; - } - - /* Copy as much as possible from input to output: */ - for (;;) { - /* Fill the window as much as possible: */ - if (s->lookahead <= 1) { - - Assert(s->strstart < s->w_size+MAX_DIST(s) || - s->block_start >= (long)s->w_size, "slide too late"); - - fill_window(s); - if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more; - - if (s->lookahead == 0) break; /* flush the current block */ - } - Assert(s->block_start >= 0L, "block gone"); - - s->strstart += s->lookahead; - s->lookahead = 0; - - /* Emit a stored block if pending_buf will be full: */ - max_start = s->block_start + max_block_size; - if (s->strstart == 0 || (ulg)s->strstart >= max_start) { - /* strstart == 0 is possible when wraparound on 16-bit machine */ - s->lookahead = (uInt)(s->strstart - max_start); - s->strstart = (uInt)max_start; - FLUSH_BLOCK(s, 0); - } - /* Flush if we may have to slide, otherwise block_start may become - * negative and the data will be gone: - */ - if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) { - FLUSH_BLOCK(s, 0); - } - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} - -/* =========================================================================== - * Compress as much as possible from the input stream, return the current - * block state. - * This function does not perform lazy evaluation of matches and inserts - * new strings in the dictionary only for unmatched strings or for short - * matches. It is used only for the fast compression options. - */ -local block_state deflate_fast(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head = NIL; /* head of the hash chain */ - int bflush; /* set if current block must be flushed */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - * At this point we have always match_length < MIN_MATCH - */ - if (hash_head != NIL && s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ -#ifdef FASTEST - if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) || - (s->strategy == Z_RLE && s->strstart - hash_head == 1)) { - s->match_length = longest_match_fast (s, hash_head); - } -#else - if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { - s->match_length = longest_match (s, hash_head); - } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { - s->match_length = longest_match_fast (s, hash_head); - } -#endif - /* longest_match() or longest_match_fast() sets match_start */ - } - if (s->match_length >= MIN_MATCH) { - check_match(s, s->strstart, s->match_start, s->match_length); - - _tr_tally_dist(s, s->strstart - s->match_start, - s->match_length - MIN_MATCH, bflush); - - s->lookahead -= s->match_length; - - /* Insert new strings in the hash table only if the match length - * is not too large. This saves time but degrades compression. - */ -#ifndef FASTEST - if (s->match_length <= s->max_insert_length && - s->lookahead >= MIN_MATCH) { - s->match_length--; /* string at strstart already in table */ - do { - s->strstart++; - INSERT_STRING(s, s->strstart, hash_head); - /* strstart never exceeds WSIZE-MAX_MATCH, so there are - * always MIN_MATCH bytes ahead. - */ - } while (--s->match_length != 0); - s->strstart++; - } else -#endif - { - s->strstart += s->match_length; - s->match_length = 0; - s->ins_h = s->window[s->strstart]; - UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]); -#if MIN_MATCH != 3 - Call UPDATE_HASH() MIN_MATCH-3 more times -#endif - /* If lookahead < MIN_MATCH, ins_h is garbage, but it does not - * matter since it will be recomputed at next deflate call. - */ - } - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} - -#ifndef FASTEST -/* =========================================================================== - * Same as above, but achieves better compression. We use a lazy - * evaluation for matches: a match is finally adopted only if there is - * no better match at the next window position. - */ -local block_state deflate_slow(s, flush) - deflate_state *s; - int flush; -{ - IPos hash_head = NIL; /* head of hash chain */ - int bflush; /* set if current block must be flushed */ - - /* Process the input block. */ - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the next match, plus MIN_MATCH bytes to insert the - * string following the next match. - */ - if (s->lookahead < MIN_LOOKAHEAD) { - fill_window(s); - if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* Insert the string window[strstart .. strstart+2] in the - * dictionary, and set hash_head to the head of the hash chain: - */ - if (s->lookahead >= MIN_MATCH) { - INSERT_STRING(s, s->strstart, hash_head); - } - - /* Find the longest match, discarding those <= prev_length. - */ - s->prev_length = s->match_length, s->prev_match = s->match_start; - s->match_length = MIN_MATCH-1; - - if (hash_head != NIL && s->prev_length < s->max_lazy_match && - s->strstart - hash_head <= MAX_DIST(s)) { - /* To simplify the code, we prevent matches with the string - * of window index 0 (in particular we have to avoid a match - * of the string with itself at the start of the input file). - */ - if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) { - s->match_length = longest_match (s, hash_head); - } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) { - s->match_length = longest_match_fast (s, hash_head); - } - /* longest_match() or longest_match_fast() sets match_start */ - - if (s->match_length <= 5 && (s->strategy == Z_FILTERED -#if TOO_FAR <= 32767 - || (s->match_length == MIN_MATCH && - s->strstart - s->match_start > TOO_FAR) -#endif - )) { - - /* If prev_match is also MIN_MATCH, match_start is garbage - * but we will ignore the current match anyway. - */ - s->match_length = MIN_MATCH-1; - } - } - /* If there was a match at the previous step and the current - * match is not better, output the previous match: - */ - if (s->prev_length >= MIN_MATCH && s->match_length <= s->prev_length) { - uInt max_insert = s->strstart + s->lookahead - MIN_MATCH; - /* Do not insert strings in hash table beyond this. */ - - check_match(s, s->strstart-1, s->prev_match, s->prev_length); - - _tr_tally_dist(s, s->strstart -1 - s->prev_match, - s->prev_length - MIN_MATCH, bflush); - - /* Insert in hash table all strings up to the end of the match. - * strstart-1 and strstart are already inserted. If there is not - * enough lookahead, the last two strings are not inserted in - * the hash table. - */ - s->lookahead -= s->prev_length-1; - s->prev_length -= 2; - do { - if (++s->strstart <= max_insert) { - INSERT_STRING(s, s->strstart, hash_head); - } - } while (--s->prev_length != 0); - s->match_available = 0; - s->match_length = MIN_MATCH-1; - s->strstart++; - - if (bflush) FLUSH_BLOCK(s, 0); - - } else if (s->match_available) { - /* If there was no match at the previous position, output a - * single literal. If there was a match but the current match - * is longer, truncate the previous match to a single literal. - */ - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally_lit(s, s->window[s->strstart-1], bflush); - if (bflush) { - FLUSH_BLOCK_ONLY(s, 0); - } - s->strstart++; - s->lookahead--; - if (s->strm->avail_out == 0) return need_more; - } else { - /* There is no previous match to compare with, wait for - * the next step to decide. - */ - s->match_available = 1; - s->strstart++; - s->lookahead--; - } - } - Assert (flush != Z_NO_FLUSH, "no flush?"); - if (s->match_available) { - Tracevv((stderr,"%c", s->window[s->strstart-1])); - _tr_tally_lit(s, s->window[s->strstart-1], bflush); - s->match_available = 0; - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} -#endif /* FASTEST */ - -#if 0 -/* =========================================================================== - * For Z_RLE, simply look for runs of bytes, generate matches only of distance - * one. Do not maintain a hash table. (It will be regenerated if this run of - * deflate switches away from Z_RLE.) - */ -local block_state deflate_rle(s, flush) - deflate_state *s; - int flush; -{ - int bflush; /* set if current block must be flushed */ - uInt run; /* length of run */ - uInt max; /* maximum length of run */ - uInt prev; /* byte at distance one to match */ - Bytef *scan; /* scan for end of run */ - - for (;;) { - /* Make sure that we always have enough lookahead, except - * at the end of the input file. We need MAX_MATCH bytes - * for the longest encodable run. - */ - if (s->lookahead < MAX_MATCH) { - fill_window(s); - if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) { - return need_more; - } - if (s->lookahead == 0) break; /* flush the current block */ - } - - /* See how many times the previous byte repeats */ - run = 0; - if (s->strstart > 0) { /* if there is a previous byte, that is */ - max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH; - scan = s->window + s->strstart - 1; - prev = *scan++; - do { - if (*scan++ != prev) - break; - } while (++run < max); - } - - /* Emit match if have run of MIN_MATCH or longer, else emit literal */ - if (run >= MIN_MATCH) { - check_match(s, s->strstart, s->strstart - 1, run); - _tr_tally_dist(s, 1, run - MIN_MATCH, bflush); - s->lookahead -= run; - s->strstart += run; - } else { - /* No match, output a literal byte */ - Tracevv((stderr,"%c", s->window[s->strstart])); - _tr_tally_lit (s, s->window[s->strstart], bflush); - s->lookahead--; - s->strstart++; - } - if (bflush) FLUSH_BLOCK(s, 0); - } - FLUSH_BLOCK(s, flush == Z_FINISH); - return flush == Z_FINISH ? finish_done : block_done; -} -#endif diff --git a/lib/zlib/src/gzio.c b/lib/zlib/src/gzio.c deleted file mode 100644 index 33cf892..0000000 --- a/lib/zlib/src/gzio.c +++ /dev/null @@ -1,1024 +0,0 @@ -/* gzio.c -- IO on .gz files - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - * - * Compile this file with -DNO_GZCOMPRESS to avoid the compression code. - */ - -#include <stdio.h> - -#include "zutil.h" - -#ifdef NO_DEFLATE /* for compatibility with old definition */ -# define NO_GZCOMPRESS -#endif - -#ifndef NO_DUMMY_DECL -struct internal_state {int dummy;}; /* for buggy compilers */ -#endif - -#ifndef Z_BUFSIZE -# ifdef MAXSEG_64K -# define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */ -# else -# define Z_BUFSIZE 16384 -# endif -#endif -#ifndef Z_PRINTF_BUFSIZE -# define Z_PRINTF_BUFSIZE 4096 -#endif - -#ifdef __MVS__ -# pragma map (fdopen , "\174\174FDOPEN") - FILE *fdopen(int, const char *); -#endif - -#ifndef STDC -extern voidp malloc OF((uInt size)); -extern void free OF((voidpf ptr)); -#endif - -#define ALLOC(size) malloc(size) -#define TRYFREE(p) {if (p) free(p);} - -static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */ -#define HEAD_CRC 0x02 /* bit 1 set: header CRC present */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define RESERVED 0xE0 /* bits 5..7: reserved */ - -typedef struct gz_stream { - z_stream stream; - int z_err; /* error code for last stream operation */ - int z_eof; /* set if end of input file */ - FILE *file; /* .gz file */ - Byte *inbuf; /* input buffer */ - Byte *outbuf; /* output buffer */ - uLong crc; /* crc32 of uncompressed data */ - char *msg; /* error message */ - char *path; /* path name for debugging only */ - int transparent; /* 1 if input file is not a .gz file */ - char mode; /* 'w' or 'r' */ - z_off_t start; /* start of compressed data in file (header skipped) */ - z_off_t in; /* bytes into deflate or inflate */ - z_off_t out; /* bytes out of deflate or inflate */ - int back; /* one character push-back */ - int last; /* true if push-back is last character */ -} gz_stream; - - -local gzFile gz_open OF((const char *path, const char *mode, int fd)); -local int do_flush OF((gzFile file, int flush)); -local int get_byte OF((gz_stream *s)); -local void check_header OF((gz_stream *s)); -local int destroy OF((gz_stream *s)); -local void putLong OF((FILE *file, uLong x)); -local uLong getLong OF((gz_stream *s)); - -/* =========================================================================== - Opens a gzip (.gz) file for reading or writing. The mode parameter - is as in fopen ("rb" or "wb"). The file is given either by file descriptor - or path name (if fd == -1). - gz_open returns NULL if the file could not be opened or if there was - insufficient memory to allocate the (de)compression state; errno - can be checked to distinguish the two cases (if errno is zero, the - zlib error is Z_MEM_ERROR). -*/ -local gzFile gz_open (path, mode, fd) - const char *path; - const char *mode; - int fd; -{ - int err; - int level = Z_DEFAULT_COMPRESSION; /* compression level */ - int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */ - char *p = (char*)mode; - gz_stream *s; - char fmode[80]; /* copy of mode, without the compression level */ - char *m = fmode; - - if (!path || !mode) return Z_NULL; - - s = (gz_stream *)ALLOC(sizeof(gz_stream)); - if (!s) return Z_NULL; - - s->stream.zalloc = (alloc_func)0; - s->stream.zfree = (free_func)0; - s->stream.opaque = (voidpf)0; - s->stream.next_in = s->inbuf = Z_NULL; - s->stream.next_out = s->outbuf = Z_NULL; - s->stream.avail_in = s->stream.avail_out = 0; - s->file = NULL; - s->z_err = Z_OK; - s->z_eof = 0; - s->in = 0; - s->out = 0; - s->back = EOF; - s->crc = crc32(0L, Z_NULL, 0); - s->msg = NULL; - s->transparent = 0; - - s->path = (char*)ALLOC(strlen(path)+1); - if (s->path == NULL) { - return destroy(s), (gzFile)Z_NULL; - } - strcpy(s->path, path); /* do this early for debugging */ - - s->mode = '\0'; - do { - if (*p == 'r') s->mode = 'r'; - if (*p == 'w' || *p == 'a') s->mode = 'w'; - if (*p >= '0' && *p <= '9') { - level = *p - '0'; - } else if (*p == 'f') { - strategy = Z_FILTERED; - } else if (*p == 'h') { - strategy = Z_HUFFMAN_ONLY; - } else if (*p == 'R') { - strategy = Z_RLE; - } else { - *m++ = *p; /* copy the mode */ - } - } while (*p++ && m != fmode + sizeof(fmode)); - if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL; - - if (s->mode == 'w') { -#ifdef NO_GZCOMPRESS - err = Z_STREAM_ERROR; -#else - err = deflateInit2(&(s->stream), level, - Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy); - /* windowBits is passed < 0 to suppress zlib header */ - - s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); -#endif - if (err != Z_OK || s->outbuf == Z_NULL) { - return destroy(s), (gzFile)Z_NULL; - } - } else { - s->stream.next_in = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); - - err = inflateInit2(&(s->stream), -MAX_WBITS); - /* windowBits is passed < 0 to tell that there is no zlib header. - * Note that in this case inflate *requires* an extra "dummy" byte - * after the compressed stream in order to complete decompression and - * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are - * present after the compressed stream. - */ - if (err != Z_OK || s->inbuf == Z_NULL) { - return destroy(s), (gzFile)Z_NULL; - } - } - s->stream.avail_out = Z_BUFSIZE; - - errno = 0; - s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode); - - if (s->file == NULL) { - return destroy(s), (gzFile)Z_NULL; - } - if (s->mode == 'w') { - /* Write a very simple .gz header: - */ - fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1], - Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE); - s->start = 10L; - /* We use 10L instead of ftell(s->file) to because ftell causes an - * fflush on some systems. This version of the library doesn't use - * start anyway in write mode, so this initialization is not - * necessary. - */ - } else { - check_header(s); /* skip the .gz header */ - s->start = ftell(s->file) - s->stream.avail_in; - } - - return (gzFile)s; -} - -/* =========================================================================== - Opens a gzip (.gz) file for reading or writing. -*/ -gzFile ZEXPORT gzopen (path, mode) - const char *path; - const char *mode; -{ - return gz_open (path, mode, -1); -} - -/* =========================================================================== - Associate a gzFile with the file descriptor fd. fd is not dup'ed here - to mimic the behavio(u)r of fdopen. -*/ -gzFile ZEXPORT gzdopen (fd, mode) - int fd; - const char *mode; -{ - char name[46]; /* allow for up to 128-bit integers */ - - if (fd < 0) return (gzFile)Z_NULL; - sprintf(name, "<fd:%d>", fd); /* for debugging */ - - return gz_open (name, mode, fd); -} - -/* =========================================================================== - * Update the compression level and strategy - */ -int ZEXPORT gzsetparams (file, level, strategy) - gzFile file; - int level; - int strategy; -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; - - /* Make room to allow flushing */ - if (s->stream.avail_out == 0) { - - s->stream.next_out = s->outbuf; - if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { - s->z_err = Z_ERRNO; - } - s->stream.avail_out = Z_BUFSIZE; - } - - return deflateParams (&(s->stream), level, strategy); -} - -/* =========================================================================== - Read a byte from a gz_stream; update next_in and avail_in. Return EOF - for end of file. - IN assertion: the stream s has been sucessfully opened for reading. -*/ -local int get_byte(s) - gz_stream *s; -{ - if (s->z_eof) return EOF; - if (s->stream.avail_in == 0) { - errno = 0; - s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file); - if (s->stream.avail_in == 0) { - s->z_eof = 1; - if (ferror(s->file)) s->z_err = Z_ERRNO; - return EOF; - } - s->stream.next_in = s->inbuf; - } - s->stream.avail_in--; - return *(s->stream.next_in)++; -} - -/* =========================================================================== - Check the gzip header of a gz_stream opened for reading. Set the stream - mode to transparent if the gzip magic header is not present; set s->err - to Z_DATA_ERROR if the magic header is present but the rest of the header - is incorrect. - IN assertion: the stream s has already been created sucessfully; - s->stream.avail_in is zero for the first time, but may be non-zero - for concatenated .gz files. -*/ -local void check_header(s) - gz_stream *s; -{ - int method; /* method byte */ - int flags; /* flags byte */ - uInt len; - int c; - - /* Assure two bytes in the buffer so we can peek ahead -- handle case - where first byte of header is at the end of the buffer after the last - gzip segment */ - len = s->stream.avail_in; - if (len < 2) { - if (len) s->inbuf[0] = s->stream.next_in[0]; - errno = 0; - len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file); - if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO; - s->stream.avail_in += len; - s->stream.next_in = s->inbuf; - if (s->stream.avail_in < 2) { - s->transparent = s->stream.avail_in; - return; - } - } - - /* Peek ahead to check the gzip magic header */ - if (s->stream.next_in[0] != gz_magic[0] || - s->stream.next_in[1] != gz_magic[1]) { - s->transparent = 1; - return; - } - s->stream.avail_in -= 2; - s->stream.next_in += 2; - - /* Check the rest of the gzip header */ - method = get_byte(s); - flags = get_byte(s); - if (method != Z_DEFLATED || (flags & RESERVED) != 0) { - s->z_err = Z_DATA_ERROR; - return; - } - - /* Discard time, xflags and OS code: */ - for (len = 0; len < 6; len++) (void)get_byte(s); - - if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */ - len = (uInt)get_byte(s); - len += ((uInt)get_byte(s))<<8; - /* len is garbage if EOF but the loop below will quit anyway */ - while (len-- != 0 && get_byte(s) != EOF) ; - } - if ((flags & ORIG_NAME) != 0) { /* skip the original file name */ - while ((c = get_byte(s)) != 0 && c != EOF) ; - } - if ((flags & COMMENT) != 0) { /* skip the .gz file comment */ - while ((c = get_byte(s)) != 0 && c != EOF) ; - } - if ((flags & HEAD_CRC) != 0) { /* skip the header crc */ - for (len = 0; len < 2; len++) (void)get_byte(s); - } - s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK; -} - - /* =========================================================================== - * Cleanup then free the given gz_stream. Return a zlib error code. - Try freeing in the reverse order of allocations. - */ -local int destroy (s) - gz_stream *s; -{ - int err = Z_OK; - - if (!s) return Z_STREAM_ERROR; - - TRYFREE(s->msg); - - if (s->stream.state != NULL) { - if (s->mode == 'w') { -#ifdef NO_GZCOMPRESS - err = Z_STREAM_ERROR; -#else - err = deflateEnd(&(s->stream)); -#endif - } else if (s->mode == 'r') { - err = inflateEnd(&(s->stream)); - } - } - if (s->file != NULL && fclose(s->file)) { -#ifdef ESPIPE - if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */ -#endif - err = Z_ERRNO; - } - if (s->z_err < 0) err = s->z_err; - - TRYFREE(s->inbuf); - TRYFREE(s->outbuf); - TRYFREE(s->path); - TRYFREE(s); - return err; -} - -/* =========================================================================== - Reads the given number of uncompressed bytes from the compressed file. - gzread returns the number of bytes actually read (0 for end of file). -*/ -int ZEXPORT gzread (file, buf, len) - gzFile file; - voidp buf; - unsigned len; -{ - gz_stream *s = (gz_stream*)file; - Bytef *start = (Bytef*)buf; /* starting point for crc computation */ - Byte *next_out; /* == stream.next_out but not forced far (for MSDOS) */ - - if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR; - - if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1; - if (s->z_err == Z_STREAM_END) return 0; /* EOF */ - - next_out = (Byte*)buf; - s->stream.next_out = (Bytef*)buf; - s->stream.avail_out = len; - - if (s->stream.avail_out && s->back != EOF) { - *next_out++ = s->back; - s->stream.next_out++; - s->stream.avail_out--; - s->back = EOF; - s->out++; - start++; - if (s->last) { - s->z_err = Z_STREAM_END; - return 1; - } - } - - while (s->stream.avail_out != 0) { - - if (s->transparent) { - /* Copy first the lookahead bytes: */ - uInt n = s->stream.avail_in; - if (n > s->stream.avail_out) n = s->stream.avail_out; - if (n > 0) { - zmemcpy(s->stream.next_out, s->stream.next_in, n); - next_out += n; - s->stream.next_out = next_out; - s->stream.next_in += n; - s->stream.avail_out -= n; - s->stream.avail_in -= n; - } - if (s->stream.avail_out > 0) { - s->stream.avail_out -= - (uInt)fread(next_out, 1, s->stream.avail_out, s->file); - } - len -= s->stream.avail_out; - s->in += len; - s->out += len; - if (len == 0) s->z_eof = 1; - return (int)len; - } - if (s->stream.avail_in == 0 && !s->z_eof) { - - errno = 0; - s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file); - if (s->stream.avail_in == 0) { - s->z_eof = 1; - if (ferror(s->file)) { - s->z_err = Z_ERRNO; - break; - } - } - s->stream.next_in = s->inbuf; - } - s->in += s->stream.avail_in; - s->out += s->stream.avail_out; - s->z_err = inflate(&(s->stream), Z_NO_FLUSH); - s->in -= s->stream.avail_in; - s->out -= s->stream.avail_out; - - if (s->z_err == Z_STREAM_END) { - /* Check CRC and original size */ - s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); - start = s->stream.next_out; - - if (getLong(s) != s->crc) { - s->z_err = Z_DATA_ERROR; - } else { - (void)getLong(s); - /* The uncompressed length returned by above getlong() may be - * different from s->out in case of concatenated .gz files. - * Check for such files: - */ - check_header(s); - if (s->z_err == Z_OK) { - inflateReset(&(s->stream)); - s->crc = crc32(0L, Z_NULL, 0); - } - } - } - if (s->z_err != Z_OK || s->z_eof) break; - } - s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start)); - - if (len == s->stream.avail_out && - (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO)) - return -1; - return (int)(len - s->stream.avail_out); -} - - -/* =========================================================================== - Reads one byte from the compressed file. gzgetc returns this byte - or -1 in case of end of file or error. -*/ -int ZEXPORT gzgetc(file) - gzFile file; -{ - unsigned char c; - - return gzread(file, &c, 1) == 1 ? c : -1; -} - - -/* =========================================================================== - Push one byte back onto the stream. -*/ -int ZEXPORT gzungetc(c, file) - int c; - gzFile file; -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF; - s->back = c; - s->out--; - s->last = (s->z_err == Z_STREAM_END); - if (s->last) s->z_err = Z_OK; - s->z_eof = 0; - return c; -} - - -/* =========================================================================== - Reads bytes from the compressed file until len-1 characters are - read, or a newline character is read and transferred to buf, or an - end-of-file condition is encountered. The string is then terminated - with a null character. - gzgets returns buf, or Z_NULL in case of error. - - The current implementation is not optimized at all. -*/ -char * ZEXPORT gzgets(file, buf, len) - gzFile file; - char *buf; - int len; -{ - char *b = buf; - if (buf == Z_NULL || len <= 0) return Z_NULL; - - while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ; - *buf = '\0'; - return b == buf && len > 0 ? Z_NULL : b; -} - - -#ifndef NO_GZCOMPRESS -/* =========================================================================== - Writes the given number of uncompressed bytes into the compressed file. - gzwrite returns the number of bytes actually written (0 in case of error). -*/ -int ZEXPORT gzwrite (file, buf, len) - gzFile file; - voidpc buf; - unsigned len; -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; - - s->stream.next_in = (Bytef*)buf; - s->stream.avail_in = len; - - while (s->stream.avail_in != 0) { - - if (s->stream.avail_out == 0) { - - s->stream.next_out = s->outbuf; - if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) { - s->z_err = Z_ERRNO; - break; - } - s->stream.avail_out = Z_BUFSIZE; - } - s->in += s->stream.avail_in; - s->out += s->stream.avail_out; - s->z_err = deflate(&(s->stream), Z_NO_FLUSH); - s->in -= s->stream.avail_in; - s->out -= s->stream.avail_out; - if (s->z_err != Z_OK) break; - } - s->crc = crc32(s->crc, (const Bytef *)buf, len); - - return (int)(len - s->stream.avail_in); -} - - -/* =========================================================================== - Converts, formats, and writes the args to the compressed file under - control of the format string, as in fprintf. gzprintf returns the number of - uncompressed bytes actually written (0 in case of error). -*/ -#ifdef STDC -#include <stdarg.h> - -int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...) -{ - char buf[Z_PRINTF_BUFSIZE]; - va_list va; - int len; - - buf[sizeof(buf) - 1] = 0; - va_start(va, format); -#ifdef NO_vsnprintf -# ifdef HAS_vsprintf_void - (void)vsprintf(buf, format, va); - va_end(va); - for (len = 0; len < sizeof(buf); len++) - if (buf[len] == 0) break; -# else - len = vsprintf(buf, format, va); - va_end(va); -# endif -#else -# ifdef HAS_vsnprintf_void - (void)vsnprintf(buf, sizeof(buf), format, va); - va_end(va); - len = strlen(buf); -# else - len = vsnprintf(buf, sizeof(buf), format, va); - va_end(va); -# endif -#endif - if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0) - return 0; - return gzwrite(file, buf, (unsigned)len); -} -#else /* not ANSI C */ - -int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, - a11, a12, a13, a14, a15, a16, a17, a18, a19, a20) - gzFile file; - const char *format; - int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, - a11, a12, a13, a14, a15, a16, a17, a18, a19, a20; -{ - char buf[Z_PRINTF_BUFSIZE]; - int len; - - buf[sizeof(buf) - 1] = 0; -#ifdef NO_snprintf -# ifdef HAS_sprintf_void - sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); - for (len = 0; len < sizeof(buf); len++) - if (buf[len] == 0) break; -# else - len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); -# endif -#else -# ifdef HAS_snprintf_void - snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); - len = strlen(buf); -# else - len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8, - a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20); -# endif -#endif - if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0) - return 0; - return gzwrite(file, buf, len); -} -#endif - -/* =========================================================================== - Writes c, converted to an unsigned char, into the compressed file. - gzputc returns the value that was written, or -1 in case of error. -*/ -int ZEXPORT gzputc(file, c) - gzFile file; - int c; -{ - unsigned char cc = (unsigned char) c; /* required for big endian systems */ - - return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1; -} - - -/* =========================================================================== - Writes the given null-terminated string to the compressed file, excluding - the terminating null character. - gzputs returns the number of characters written, or -1 in case of error. -*/ -int ZEXPORT gzputs(file, s) - gzFile file; - const char *s; -{ - return gzwrite(file, (char*)s, (unsigned)strlen(s)); -} - - -/* =========================================================================== - Flushes all pending output into the compressed file. The parameter - flush is as in the deflate() function. -*/ -local int do_flush (file, flush) - gzFile file; - int flush; -{ - uInt len; - int done = 0; - gz_stream *s = (gz_stream*)file; - - if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR; - - s->stream.avail_in = 0; /* should be zero already anyway */ - - for (;;) { - len = Z_BUFSIZE - s->stream.avail_out; - - if (len != 0) { - if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) { - s->z_err = Z_ERRNO; - return Z_ERRNO; - } - s->stream.next_out = s->outbuf; - s->stream.avail_out = Z_BUFSIZE; - } - if (done) break; - s->out += s->stream.avail_out; - s->z_err = deflate(&(s->stream), flush); - s->out -= s->stream.avail_out; - - /* Ignore the second of two consecutive flushes: */ - if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK; - - /* deflate has finished flushing only when it hasn't used up - * all the available space in the output buffer: - */ - done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END); - - if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break; - } - return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; -} - -int ZEXPORT gzflush (file, flush) - gzFile file; - int flush; -{ - gz_stream *s = (gz_stream*)file; - int err = do_flush (file, flush); - - if (err) return err; - fflush(s->file); - return s->z_err == Z_STREAM_END ? Z_OK : s->z_err; -} -#endif /* NO_GZCOMPRESS */ - -/* =========================================================================== - Sets the starting position for the next gzread or gzwrite on the given - compressed file. The offset represents a number of bytes in the - gzseek returns the resulting offset location as measured in bytes from - the beginning of the uncompressed stream, or -1 in case of error. - SEEK_END is not implemented, returns error. - In this version of the library, gzseek can be extremely slow. -*/ -z_off_t ZEXPORT gzseek (file, offset, whence) - gzFile file; - z_off_t offset; - int whence; -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL || whence == SEEK_END || - s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) { - return -1L; - } - - if (s->mode == 'w') { -#ifdef NO_GZCOMPRESS - return -1L; -#else - if (whence == SEEK_SET) { - offset -= s->in; - } - if (offset < 0) return -1L; - - /* At this point, offset is the number of zero bytes to write. */ - if (s->inbuf == Z_NULL) { - s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */ - if (s->inbuf == Z_NULL) return -1L; - zmemzero(s->inbuf, Z_BUFSIZE); - } - while (offset > 0) { - uInt size = Z_BUFSIZE; - if (offset < Z_BUFSIZE) size = (uInt)offset; - - size = gzwrite(file, s->inbuf, size); - if (size == 0) return -1L; - - offset -= size; - } - return s->in; -#endif - } - /* Rest of function is for reading only */ - - /* compute absolute position */ - if (whence == SEEK_CUR) { - offset += s->out; - } - if (offset < 0) return -1L; - - if (s->transparent) { - /* map to fseek */ - s->back = EOF; - s->stream.avail_in = 0; - s->stream.next_in = s->inbuf; - if (fseek(s->file, offset, SEEK_SET) < 0) return -1L; - - s->in = s->out = offset; - return offset; - } - - /* For a negative seek, rewind and use positive seek */ - if (offset >= s->out) { - offset -= s->out; - } else if (gzrewind(file) < 0) { - return -1L; - } - /* offset is now the number of bytes to skip. */ - - if (offset != 0 && s->outbuf == Z_NULL) { - s->outbuf = (Byte*)ALLOC(Z_BUFSIZE); - if (s->outbuf == Z_NULL) return -1L; - } - if (offset && s->back != EOF) { - s->back = EOF; - s->out++; - offset--; - if (s->last) s->z_err = Z_STREAM_END; - } - while (offset > 0) { - int size = Z_BUFSIZE; - if (offset < Z_BUFSIZE) size = (int)offset; - - size = gzread(file, s->outbuf, (uInt)size); - if (size <= 0) return -1L; - offset -= size; - } - return s->out; -} - -/* =========================================================================== - Rewinds input file. -*/ -int ZEXPORT gzrewind (file) - gzFile file; -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL || s->mode != 'r') return -1; - - s->z_err = Z_OK; - s->z_eof = 0; - s->back = EOF; - s->stream.avail_in = 0; - s->stream.next_in = s->inbuf; - s->crc = crc32(0L, Z_NULL, 0); - if (!s->transparent) (void)inflateReset(&s->stream); - s->in = 0; - s->out = 0; - return fseek(s->file, s->start, SEEK_SET); -} - -/* =========================================================================== - Returns the starting position for the next gzread or gzwrite on the - given compressed file. This position represents a number of bytes in the - uncompressed data stream. -*/ -z_off_t ZEXPORT gztell (file) - gzFile file; -{ - return gzseek(file, 0L, SEEK_CUR); -} - -/* =========================================================================== - Returns 1 when EOF has previously been detected reading the given - input stream, otherwise zero. -*/ -int ZEXPORT gzeof (file) - gzFile file; -{ - gz_stream *s = (gz_stream*)file; - - /* With concatenated compressed files that can have embedded - * crc trailers, z_eof is no longer the only/best indicator of EOF - * on a gz_stream. Handle end-of-stream error explicitly here. - */ - if (s == NULL || s->mode != 'r') return 0; - if (s->z_eof) return 1; - return s->z_err == Z_STREAM_END; -} - -/* =========================================================================== - Returns 1 if reading and doing so transparently, otherwise zero. -*/ -int ZEXPORT gzdirect (file) - gzFile file; -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL || s->mode != 'r') return 0; - return s->transparent; -} - -/* =========================================================================== - Outputs a long in LSB order to the given file -*/ -local void putLong (file, x) - FILE *file; - uLong x; -{ - int n; - for (n = 0; n < 4; n++) { - fputc((int)(x & 0xff), file); - x >>= 8; - } -} - -/* =========================================================================== - Reads a long in LSB order from the given gz_stream. Sets z_err in case - of error. -*/ -local uLong getLong (s) - gz_stream *s; -{ - uLong x = (uLong)get_byte(s); - int c; - - x += ((uLong)get_byte(s))<<8; - x += ((uLong)get_byte(s))<<16; - c = get_byte(s); - if (c == EOF) s->z_err = Z_DATA_ERROR; - x += ((uLong)c)<<24; - return x; -} - -/* =========================================================================== - Flushes all pending output if necessary, closes the compressed file - and deallocates all the (de)compression state. -*/ -int ZEXPORT gzclose (file) - gzFile file; -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL) return Z_STREAM_ERROR; - - if (s->mode == 'w') { -#ifdef NO_GZCOMPRESS - return Z_STREAM_ERROR; -#else - if (do_flush (file, Z_FINISH) != Z_OK) - return destroy((gz_stream*)file); - - putLong (s->file, s->crc); - putLong (s->file, (uLong)(s->in & 0xffffffff)); -#endif - } - return destroy((gz_stream*)file); -} - -#ifdef STDC -# define zstrerror(errnum) strerror(errnum) -#else -# define zstrerror(errnum) "" -#endif - -/* =========================================================================== - Returns the error message for the last error which occurred on the - given compressed file. errnum is set to zlib error number. If an - error occurred in the file system and not in the compression library, - errnum is set to Z_ERRNO and the application may consult errno - to get the exact error code. -*/ -const char * ZEXPORT gzerror (file, errnum) - gzFile file; - int *errnum; -{ - char *m; - gz_stream *s = (gz_stream*)file; - - if (s == NULL) { - *errnum = Z_STREAM_ERROR; - return (const char*)ERR_MSG(Z_STREAM_ERROR); - } - *errnum = s->z_err; - if (*errnum == Z_OK) return (const char*)""; - - m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg); - - if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err); - - TRYFREE(s->msg); - s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3); - if (s->msg == Z_NULL) return (const char*)ERR_MSG(Z_MEM_ERROR); - strcpy(s->msg, s->path); - strcat(s->msg, ": "); - strcat(s->msg, m); - return (const char*)s->msg; -} - -/* =========================================================================== - Clear the error and end-of-file flags, and do the same for the real file. -*/ -void ZEXPORT gzclearerr (file) - gzFile file; -{ - gz_stream *s = (gz_stream*)file; - - if (s == NULL) return; - if (s->z_err != Z_STREAM_END) s->z_err = Z_OK; - s->z_eof = 0; - clearerr(s->file); -} diff --git a/lib/zlib/src/inffast.c b/lib/zlib/src/inffast.c deleted file mode 100644 index bbee92e..0000000 --- a/lib/zlib/src/inffast.c +++ /dev/null @@ -1,318 +0,0 @@ -/* inffast.c -- fast decoding - * Copyright (C) 1995-2004 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -#ifndef ASMINF - -/* Allow machine dependent optimization for post-increment or pre-increment. - Based on testing to date, - Pre-increment preferred for: - - PowerPC G3 (Adler) - - MIPS R5000 (Randers-Pehrson) - Post-increment preferred for: - - none - No measurable difference: - - Pentium III (Anderson) - - M68060 (Nikl) - */ -#ifdef POSTINC -# define OFF 0 -# define PUP(a) *(a)++ -#else -# define OFF 1 -# define PUP(a) *++(a) -#endif - -/* - Decode literal, length, and distance codes and write out the resulting - literal and match bytes until either not enough input or output is - available, an end-of-block is encountered, or a data error is encountered. - When large enough input and output buffers are supplied to inflate(), for - example, a 16K input buffer and a 64K output buffer, more than 95% of the - inflate execution time is spent in this routine. - - Entry assumptions: - - state->mode == LEN - strm->avail_in >= 6 - strm->avail_out >= 258 - start >= strm->avail_out - state->bits < 8 - - On return, state->mode is one of: - - LEN -- ran out of enough output space or enough available input - TYPE -- reached end of block code, inflate() to interpret next block - BAD -- error in block data - - Notes: - - - The maximum input bits used by a length/distance pair is 15 bits for the - length code, 5 bits for the length extra, 15 bits for the distance code, - and 13 bits for the distance extra. This totals 48 bits, or six bytes. - Therefore if strm->avail_in >= 6, then there is enough input to avoid - checking for available input while decoding. - - - The maximum bytes that a single length/distance pair can output is 258 - bytes, which is the maximum length that can be coded. inflate_fast() - requires strm->avail_out >= 258 for each loop to avoid checking for - output space. - */ -void inflate_fast(strm, start) -z_streamp strm; -unsigned start; /* inflate()'s starting value for strm->avail_out */ -{ - struct inflate_state FAR *state; - unsigned char FAR *in; /* local strm->next_in */ - unsigned char FAR *last; /* while in < last, enough input available */ - unsigned char FAR *out; /* local strm->next_out */ - unsigned char FAR *beg; /* inflate()'s initial strm->next_out */ - unsigned char FAR *end; /* while out < end, enough space available */ -#ifdef INFLATE_STRICT - unsigned dmax; /* maximum distance from zlib header */ -#endif - unsigned wsize; /* window size or zero if not using window */ - unsigned whave; /* valid bytes in the window */ - unsigned write; /* window write index */ - unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */ - unsigned long hold; /* local strm->hold */ - unsigned bits; /* local strm->bits */ - code const FAR *lcode; /* local strm->lencode */ - code const FAR *dcode; /* local strm->distcode */ - unsigned lmask; /* mask for first level of length codes */ - unsigned dmask; /* mask for first level of distance codes */ - code this; /* retrieved table entry */ - unsigned op; /* code bits, operation, extra bits, or */ - /* window position, window bytes to copy */ - unsigned len; /* match length, unused bytes */ - unsigned dist; /* match distance */ - unsigned char FAR *from; /* where to copy match from */ - - /* copy state to local variables */ - state = (struct inflate_state FAR *)strm->state; - in = strm->next_in - OFF; - last = in + (strm->avail_in - 5); - out = strm->next_out - OFF; - beg = out - (start - strm->avail_out); - end = out + (strm->avail_out - 257); -#ifdef INFLATE_STRICT - dmax = state->dmax; -#endif - wsize = state->wsize; - whave = state->whave; - write = state->write; - window = state->window; - hold = state->hold; - bits = state->bits; - lcode = state->lencode; - dcode = state->distcode; - lmask = (1U << state->lenbits) - 1; - dmask = (1U << state->distbits) - 1; - - /* decode literals and length/distances until end-of-block or not enough - input data or output space */ - do { - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = lcode[hold & lmask]; - dolen: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op == 0) { /* literal */ - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - PUP(out) = (unsigned char)(this.val); - } - else if (op & 16) { /* length base */ - len = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (op) { - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - len += (unsigned)hold & ((1U << op) - 1); - hold >>= op; - bits -= op; - } - Tracevv((stderr, "inflate: length %u\n", len)); - if (bits < 15) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - this = dcode[hold & dmask]; - dodist: - op = (unsigned)(this.bits); - hold >>= op; - bits -= op; - op = (unsigned)(this.op); - if (op & 16) { /* distance base */ - dist = (unsigned)(this.val); - op &= 15; /* number of extra bits */ - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - if (bits < op) { - hold += (unsigned long)(PUP(in)) << bits; - bits += 8; - } - } - dist += (unsigned)hold & ((1U << op) - 1); -#ifdef INFLATE_STRICT - if (dist > dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - hold >>= op; - bits -= op; - Tracevv((stderr, "inflate: distance %u\n", dist)); - op = (unsigned)(out - beg); /* max distance in output */ - if (dist > op) { /* see if copy from window */ - op = dist - op; /* distance back in window */ - if (op > whave) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - from = window - OFF; - if (write == 0) { /* very common case */ - from += wsize - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - else if (write < op) { /* wrap around window */ - from += wsize + write - op; - op -= write; - if (op < len) { /* some from end of window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = window - OFF; - if (write < len) { /* some from start of window */ - op = write; - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - } - else { /* contiguous in window */ - from += write - op; - if (op < len) { /* some from window */ - len -= op; - do { - PUP(out) = PUP(from); - } while (--op); - from = out - dist; /* rest from output */ - } - } - while (len > 2) { - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - else { - from = out - dist; /* copy direct from output */ - do { /* minimum length is three */ - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } while (len > 2); - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } - } - } - else if ((op & 64) == 0) { /* 2nd level distance code */ - this = dcode[this.val + (hold & ((1U << op) - 1))]; - goto dodist; - } - else { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - } - else if ((op & 64) == 0) { /* 2nd level length code */ - this = lcode[this.val + (hold & ((1U << op) - 1))]; - goto dolen; - } - else if (op & 32) { /* end-of-block */ - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - else { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - } while (in < last && out < end); - - /* return unused bytes (on entry, bits < 8, so in won't go too far back) */ - len = bits >> 3; - in -= len; - bits -= len << 3; - hold &= (1U << bits) - 1; - - /* update state and return */ - strm->next_in = in + OFF; - strm->next_out = out + OFF; - strm->avail_in = (unsigned)(in < last ? 5 + (last - in) : 5 - (in - last)); - strm->avail_out = (unsigned)(out < end ? - 257 + (end - out) : 257 - (out - end)); - state->hold = hold; - state->bits = bits; - return; -} - -/* - inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe): - - Using bit fields for code structure - - Different op definition to avoid & for extra bits (do & for table bits) - - Three separate decoding do-loops for direct, window, and write == 0 - - Special case for distance > 1 copies to do overlapped load and store copy - - Explicit branch predictions (based on measured branch probabilities) - - Deferring match copy and interspersed it with decoding subsequent codes - - Swapping literal/length else - - Swapping window/direct else - - Larger unrolled copy loops (three is about right) - - Moving len -= 3 statement into middle of loop - */ - -#endif /* !ASMINF */ diff --git a/lib/zlib/src/inflate.c b/lib/zlib/src/inflate.c deleted file mode 100644 index 792fdee..0000000 --- a/lib/zlib/src/inflate.c +++ /dev/null @@ -1,1368 +0,0 @@ -/* inflate.c -- zlib decompression - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - * Change history: - * - * 1.2.beta0 24 Nov 2002 - * - First version -- complete rewrite of inflate to simplify code, avoid - * creation of window when not needed, minimize use of window when it is - * needed, make inffast.c even faster, implement gzip decoding, and to - * improve code readability and style over the previous zlib inflate code - * - * 1.2.beta1 25 Nov 2002 - * - Use pointers for available input and output checking in inffast.c - * - Remove input and output counters in inffast.c - * - Change inffast.c entry and loop from avail_in >= 7 to >= 6 - * - Remove unnecessary second byte pull from length extra in inffast.c - * - Unroll direct copy to three copies per loop in inffast.c - * - * 1.2.beta2 4 Dec 2002 - * - Change external routine names to reduce potential conflicts - * - Correct filename to inffixed.h for fixed tables in inflate.c - * - Make hbuf[] unsigned char to match parameter type in inflate.c - * - Change strm->next_out[-state->offset] to *(strm->next_out - state->offset) - * to avoid negation problem on Alphas (64 bit) in inflate.c - * - * 1.2.beta3 22 Dec 2002 - * - Add comments on state->bits assertion in inffast.c - * - Add comments on op field in inftrees.h - * - Fix bug in reuse of allocated window after inflateReset() - * - Remove bit fields--back to byte structure for speed - * - Remove distance extra == 0 check in inflate_fast()--only helps for lengths - * - Change post-increments to pre-increments in inflate_fast(), PPC biased? - * - Add compile time option, POSTINC, to use post-increments instead (Intel?) - * - Make MATCH copy in inflate() much faster for when inflate_fast() not used - * - Use local copies of stream next and avail values, as well as local bit - * buffer and bit count in inflate()--for speed when inflate_fast() not used - * - * 1.2.beta4 1 Jan 2003 - * - Split ptr - 257 statements in inflate_table() to avoid compiler warnings - * - Move a comment on output buffer sizes from inffast.c to inflate.c - * - Add comments in inffast.c to introduce the inflate_fast() routine - * - Rearrange window copies in inflate_fast() for speed and simplification - * - Unroll last copy for window match in inflate_fast() - * - Use local copies of window variables in inflate_fast() for speed - * - Pull out common write == 0 case for speed in inflate_fast() - * - Make op and len in inflate_fast() unsigned for consistency - * - Add FAR to lcode and dcode declarations in inflate_fast() - * - Simplified bad distance check in inflate_fast() - * - Added inflateBackInit(), inflateBack(), and inflateBackEnd() in new - * source file infback.c to provide a call-back interface to inflate for - * programs like gzip and unzip -- uses window as output buffer to avoid - * window copying - * - * 1.2.beta5 1 Jan 2003 - * - Improved inflateBack() interface to allow the caller to provide initial - * input in strm. - * - Fixed stored blocks bug in inflateBack() - * - * 1.2.beta6 4 Jan 2003 - * - Added comments in inffast.c on effectiveness of POSTINC - * - Typecasting all around to reduce compiler warnings - * - Changed loops from while (1) or do {} while (1) to for (;;), again to - * make compilers happy - * - Changed type of window in inflateBackInit() to unsigned char * - * - * 1.2.beta7 27 Jan 2003 - * - Changed many types to unsigned or unsigned short to avoid warnings - * - Added inflateCopy() function - * - * 1.2.0 9 Mar 2003 - * - Changed inflateBack() interface to provide separate opaque descriptors - * for the in() and out() functions - * - Changed inflateBack() argument and in_func typedef to swap the length - * and buffer address return values for the input function - * - Check next_in and next_out for Z_NULL on entry to inflate() - * - * The history for versions after 1.2.0 are in ChangeLog in zlib distribution. - */ - -#include "zutil.h" -#include "inftrees.h" -#include "inflate.h" -#include "inffast.h" - -#ifdef MAKEFIXED -# ifndef BUILDFIXED -# define BUILDFIXED -# endif -#endif - -/* function prototypes */ -local void fixedtables OF((struct inflate_state FAR *state)); -local int updatewindow OF((z_streamp strm, unsigned out)); -#ifdef BUILDFIXED - void makefixed OF((void)); -#endif -local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf, - unsigned len)); - -int ZEXPORT inflateReset(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - strm->total_in = strm->total_out = state->total = 0; - strm->msg = Z_NULL; - strm->adler = 1; /* to support ill-conceived Java test suite */ - state->mode = HEAD; - state->last = 0; - state->havedict = 0; - state->dmax = 32768U; - state->head = Z_NULL; - state->wsize = 0; - state->whave = 0; - state->write = 0; - state->hold = 0; - state->bits = 0; - state->lencode = state->distcode = state->next = state->codes; - Tracev((stderr, "inflate: reset\n")); - return Z_OK; -} - -int ZEXPORT inflatePrime(strm, bits, value) -z_streamp strm; -int bits; -int value; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR; - value &= (1L << bits) - 1; - state->hold += value << state->bits; - state->bits += bits; - return Z_OK; -} - -int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -z_streamp strm; -int windowBits; -const char *version; -int stream_size; -{ - struct inflate_state FAR *state; - - if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || - stream_size != (int)(sizeof(z_stream))) - return Z_VERSION_ERROR; - if (strm == Z_NULL) return Z_STREAM_ERROR; - strm->msg = Z_NULL; /* in case we return an error */ - if (strm->zalloc == (alloc_func)0) { - strm->zalloc = zcalloc; - strm->opaque = (voidpf)0; - } - if (strm->zfree == (free_func)0) strm->zfree = zcfree; - state = (struct inflate_state FAR *) - ZALLOC(strm, 1, sizeof(struct inflate_state)); - if (state == Z_NULL) return Z_MEM_ERROR; - Tracev((stderr, "inflate: allocated\n")); - strm->state = (struct internal_state FAR *)state; - if (windowBits < 0) { - state->wrap = 0; - windowBits = -windowBits; - } - else { - state->wrap = (windowBits >> 4) + 1; -#ifdef GUNZIP - if (windowBits < 48) windowBits &= 15; -#endif - } - if (windowBits < 8 || windowBits > 15) { - ZFREE(strm, state); - strm->state = Z_NULL; - return Z_STREAM_ERROR; - } - state->wbits = (unsigned)windowBits; - state->window = Z_NULL; - return inflateReset(strm); -} - -int ZEXPORT inflateInit_(strm, version, stream_size) -z_streamp strm; -const char *version; -int stream_size; -{ - return inflateInit2_(strm, DEF_WBITS, version, stream_size); -} - -/* - Return state with length and distance decoding tables and index sizes set to - fixed code decoding. Normally this returns fixed tables from inffixed.h. - If BUILDFIXED is defined, then instead this routine builds the tables the - first time it's called, and returns those tables the first time and - thereafter. This reduces the size of the code by about 2K bytes, in - exchange for a little execution time. However, BUILDFIXED should not be - used for threaded applications, since the rewriting of the tables and virgin - may not be thread-safe. - */ -local void fixedtables(state) -struct inflate_state FAR *state; -{ -#ifdef BUILDFIXED - static int virgin = 1; - static code *lenfix, *distfix; - static code fixed[544]; - - /* build fixed huffman tables if first call (may not be thread safe) */ - if (virgin) { - unsigned sym, bits; - static code *next; - - /* literal/length table */ - sym = 0; - while (sym < 144) state->lens[sym++] = 8; - while (sym < 256) state->lens[sym++] = 9; - while (sym < 280) state->lens[sym++] = 7; - while (sym < 288) state->lens[sym++] = 8; - next = fixed; - lenfix = next; - bits = 9; - inflate_table(LENS, state->lens, 288, &(next), &(bits), state->work); - - /* distance table */ - sym = 0; - while (sym < 32) state->lens[sym++] = 5; - distfix = next; - bits = 5; - inflate_table(DISTS, state->lens, 32, &(next), &(bits), state->work); - - /* do this just once */ - virgin = 0; - } -#else /* !BUILDFIXED */ -# include "inffixed.h" -#endif /* BUILDFIXED */ - state->lencode = lenfix; - state->lenbits = 9; - state->distcode = distfix; - state->distbits = 5; -} - -#ifdef MAKEFIXED -#include <stdio.h> - -/* - Write out the inffixed.h that is #include'd above. Defining MAKEFIXED also - defines BUILDFIXED, so the tables are built on the fly. makefixed() writes - those tables to stdout, which would be piped to inffixed.h. A small program - can simply call makefixed to do this: - - void makefixed(void); - - int main(void) - { - makefixed(); - return 0; - } - - Then that can be linked with zlib built with MAKEFIXED defined and run: - - a.out > inffixed.h - */ -void makefixed() -{ - unsigned low, size; - struct inflate_state state; - - fixedtables(&state); - puts(" /* inffixed.h -- table for decoding fixed codes"); - puts(" * Generated automatically by makefixed()."); - puts(" */"); - puts(""); - puts(" /* WARNING: this file should *not* be used by applications."); - puts(" It is part of the implementation of this library and is"); - puts(" subject to change. Applications should only use zlib.h."); - puts(" */"); - puts(""); - size = 1U << 9; - printf(" static const code lenfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 7) == 0) printf("\n "); - printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits, - state.lencode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); - size = 1U << 5; - printf("\n static const code distfix[%u] = {", size); - low = 0; - for (;;) { - if ((low % 6) == 0) printf("\n "); - printf("{%u,%u,%d}", state.distcode[low].op, state.distcode[low].bits, - state.distcode[low].val); - if (++low == size) break; - putchar(','); - } - puts("\n };"); -} -#endif /* MAKEFIXED */ - -/* - Update the window with the last wsize (normally 32K) bytes written before - returning. If window does not exist yet, create it. This is only called - when a window is already in use, or when output has been written during this - inflate call, but the end of the deflate stream has not been reached yet. - It is also called to create a window for dictionary data when a dictionary - is loaded. - - Providing output buffers larger than 32K to inflate() should provide a speed - advantage, since only the last 32K of output is copied to the sliding window - upon return from inflate(), and since all distances after the first 32K of - output will fall in the output data, making match copies simpler and faster. - The advantage may be dependent on the size of the processor's data caches. - */ -local int updatewindow(strm, out) -z_streamp strm; -unsigned out; -{ - struct inflate_state FAR *state; - unsigned copy, dist; - - state = (struct inflate_state FAR *)strm->state; - - /* if it hasn't been done already, allocate space for the window */ - if (state->window == Z_NULL) { - state->window = (unsigned char FAR *) - ZALLOC(strm, 1U << state->wbits, - sizeof(unsigned char)); - if (state->window == Z_NULL) return 1; - } - - /* if window not in use yet, initialize */ - if (state->wsize == 0) { - state->wsize = 1U << state->wbits; - state->write = 0; - state->whave = 0; - } - - /* copy state->wsize or less output bytes into the circular window */ - copy = out - strm->avail_out; - if (copy >= state->wsize) { - zmemcpy(state->window, strm->next_out - state->wsize, state->wsize); - state->write = 0; - state->whave = state->wsize; - } - else { - dist = state->wsize - state->write; - if (dist > copy) dist = copy; - zmemcpy(state->window + state->write, strm->next_out - copy, dist); - copy -= dist; - if (copy) { - zmemcpy(state->window, strm->next_out - copy, copy); - state->write = copy; - state->whave = state->wsize; - } - else { - state->write += dist; - if (state->write == state->wsize) state->write = 0; - if (state->whave < state->wsize) state->whave += dist; - } - } - return 0; -} - -/* Macros for inflate(): */ - -/* check function to use adler32() for zlib or crc32() for gzip */ -#ifdef GUNZIP -# define UPDATE(check, buf, len) \ - (state->flags ? crc32(check, buf, len) : adler32(check, buf, len)) -#else -# define UPDATE(check, buf, len) adler32(check, buf, len) -#endif - -/* check macros for header crc */ -#ifdef GUNZIP -# define CRC2(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - check = crc32(check, hbuf, 2); \ - } while (0) - -# define CRC4(check, word) \ - do { \ - hbuf[0] = (unsigned char)(word); \ - hbuf[1] = (unsigned char)((word) >> 8); \ - hbuf[2] = (unsigned char)((word) >> 16); \ - hbuf[3] = (unsigned char)((word) >> 24); \ - check = crc32(check, hbuf, 4); \ - } while (0) -#endif - -/* Load registers with state in inflate() for speed */ -#define LOAD() \ - do { \ - put = strm->next_out; \ - left = strm->avail_out; \ - next = strm->next_in; \ - have = strm->avail_in; \ - hold = state->hold; \ - bits = state->bits; \ - } while (0) - -/* Restore state from registers in inflate() */ -#define RESTORE() \ - do { \ - strm->next_out = put; \ - strm->avail_out = left; \ - strm->next_in = next; \ - strm->avail_in = have; \ - state->hold = hold; \ - state->bits = bits; \ - } while (0) - -/* Clear the input bit accumulator */ -#define INITBITS() \ - do { \ - hold = 0; \ - bits = 0; \ - } while (0) - -/* Get a byte of input into the bit accumulator, or return from inflate() - if there is no input available. */ -#define PULLBYTE() \ - do { \ - if (have == 0) goto inf_leave; \ - have--; \ - hold += (unsigned long)(*next++) << bits; \ - bits += 8; \ - } while (0) - -/* Assure that there are at least n bits in the bit accumulator. If there is - not enough available input to do that, then return from inflate(). */ -#define NEEDBITS(n) \ - do { \ - while (bits < (unsigned)(n)) \ - PULLBYTE(); \ - } while (0) - -/* Return the low n bits of the bit accumulator (n < 16) */ -#define BITS(n) \ - ((unsigned)hold & ((1U << (n)) - 1)) - -/* Remove n bits from the bit accumulator */ -#define DROPBITS(n) \ - do { \ - hold >>= (n); \ - bits -= (unsigned)(n); \ - } while (0) - -/* Remove zero to seven bits as needed to go to a byte boundary */ -#define BYTEBITS() \ - do { \ - hold >>= bits & 7; \ - bits -= bits & 7; \ - } while (0) - -/* Reverse the bytes in a 32-bit value */ -#define REVERSE(q) \ - ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \ - (((q) & 0xff00) << 8) + (((q) & 0xff) << 24)) - -/* - inflate() uses a state machine to process as much input data and generate as - much output data as possible before returning. The state machine is - structured roughly as follows: - - for (;;) switch (state) { - ... - case STATEn: - if (not enough input data or output space to make progress) - return; - ... make progress ... - state = STATEm; - break; - ... - } - - so when inflate() is called again, the same case is attempted again, and - if the appropriate resources are provided, the machine proceeds to the - next state. The NEEDBITS() macro is usually the way the state evaluates - whether it can proceed or should return. NEEDBITS() does the return if - the requested bits are not available. The typical use of the BITS macros - is: - - NEEDBITS(n); - ... do something with BITS(n) ... - DROPBITS(n); - - where NEEDBITS(n) either returns from inflate() if there isn't enough - input left to load n bits into the accumulator, or it continues. BITS(n) - gives the low n bits in the accumulator. When done, DROPBITS(n) drops - the low n bits off the accumulator. INITBITS() clears the accumulator - and sets the number of available bits to zero. BYTEBITS() discards just - enough bits to put the accumulator on a byte boundary. After BYTEBITS() - and a NEEDBITS(8), then BITS(8) would return the next byte in the stream. - - NEEDBITS(n) uses PULLBYTE() to get an available byte of input, or to return - if there is no input available. The decoding of variable length codes uses - PULLBYTE() directly in order to pull just enough bytes to decode the next - code, and no more. - - Some states loop until they get enough input, making sure that enough - state information is maintained to continue the loop where it left off - if NEEDBITS() returns in the loop. For example, want, need, and keep - would all have to actually be part of the saved state in case NEEDBITS() - returns: - - case STATEw: - while (want < need) { - NEEDBITS(n); - keep[want++] = BITS(n); - DROPBITS(n); - } - state = STATEx; - case STATEx: - - As shown above, if the next state is also the next case, then the break - is omitted. - - A state may also return if there is not enough output space available to - complete that state. Those states are copying stored data, writing a - literal byte, and copying a matching string. - - When returning, a "goto inf_leave" is used to update the total counters, - update the check value, and determine whether any progress has been made - during that inflate() call in order to return the proper return code. - Progress is defined as a change in either strm->avail_in or strm->avail_out. - When there is a window, goto inf_leave will update the window with the last - output written. If a goto inf_leave occurs in the middle of decompression - and there is no window currently, goto inf_leave will create one and copy - output to the window for the next call of inflate(). - - In this implementation, the flush parameter of inflate() only affects the - return code (per zlib.h). inflate() always writes as much as possible to - strm->next_out, given the space available and the provided input--the effect - documented in zlib.h of Z_SYNC_FLUSH. Furthermore, inflate() always defers - the allocation of and copying into a sliding window until necessary, which - provides the effect documented in zlib.h for Z_FINISH when the entire input - stream available. So the only thing the flush parameter actually does is: - when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it - will return Z_BUF_ERROR if it has not reached the end of the stream. - */ - -int ZEXPORT inflate(strm, flush) -z_streamp strm; -int flush; -{ - struct inflate_state FAR *state; - unsigned char FAR *next; /* next input */ - unsigned char FAR *put; /* next output */ - unsigned have, left; /* available input and output */ - unsigned long hold; /* bit buffer */ - unsigned bits; /* bits in bit buffer */ - unsigned in, out; /* save starting available input and output */ - unsigned copy; /* number of stored or match bytes to copy */ - unsigned char FAR *from; /* where to copy match bytes from */ - code this; /* current decoding table entry */ - code last; /* parent table entry */ - unsigned len; /* length to copy for repeats, bits to drop */ - int ret; /* return code */ -#ifdef GUNZIP - unsigned char hbuf[4]; /* buffer for gzip header crc calculation */ -#endif - static const unsigned short order[19] = /* permutation of code lengths */ - {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; - - if (strm == Z_NULL || strm->state == Z_NULL || strm->next_out == Z_NULL || - (strm->next_in == Z_NULL && strm->avail_in != 0)) - return Z_STREAM_ERROR; - - state = (struct inflate_state FAR *)strm->state; - if (state->mode == TYPE) state->mode = TYPEDO; /* skip check */ - LOAD(); - in = have; - out = left; - ret = Z_OK; - for (;;) - switch (state->mode) { - case HEAD: - if (state->wrap == 0) { - state->mode = TYPEDO; - break; - } - NEEDBITS(16); -#ifdef GUNZIP - if ((state->wrap & 2) && hold == 0x8b1f) { /* gzip header */ - state->check = crc32(0L, Z_NULL, 0); - CRC2(state->check, hold); - INITBITS(); - state->mode = FLAGS; - break; - } - state->flags = 0; /* expect zlib header */ - if (state->head != Z_NULL) - state->head->done = -1; - if (!(state->wrap & 1) || /* check if zlib header allowed */ -#else - if ( -#endif - ((BITS(8) << 8) + (hold >> 8)) % 31) { - strm->msg = (char *)"incorrect header check"; - state->mode = BAD; - break; - } - if (BITS(4) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - DROPBITS(4); - len = BITS(4) + 8; - if (len > state->wbits) { - strm->msg = (char *)"invalid window size"; - state->mode = BAD; - break; - } - state->dmax = 1U << len; - Tracev((stderr, "inflate: zlib header ok\n")); - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = hold & 0x200 ? DICTID : TYPE; - INITBITS(); - break; -#ifdef GUNZIP - case FLAGS: - NEEDBITS(16); - state->flags = (int)(hold); - if ((state->flags & 0xff) != Z_DEFLATED) { - strm->msg = (char *)"unknown compression method"; - state->mode = BAD; - break; - } - if (state->flags & 0xe000) { - strm->msg = (char *)"unknown header flags set"; - state->mode = BAD; - break; - } - if (state->head != Z_NULL) - state->head->text = (int)((hold >> 8) & 1); - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = TIME; - case TIME: - NEEDBITS(32); - if (state->head != Z_NULL) - state->head->time = hold; - if (state->flags & 0x0200) CRC4(state->check, hold); - INITBITS(); - state->mode = OS; - case OS: - NEEDBITS(16); - if (state->head != Z_NULL) { - state->head->xflags = (int)(hold & 0xff); - state->head->os = (int)(hold >> 8); - } - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - state->mode = EXLEN; - case EXLEN: - if (state->flags & 0x0400) { - NEEDBITS(16); - state->length = (unsigned)(hold); - if (state->head != Z_NULL) - state->head->extra_len = (unsigned)hold; - if (state->flags & 0x0200) CRC2(state->check, hold); - INITBITS(); - } - else if (state->head != Z_NULL) - state->head->extra = Z_NULL; - state->mode = EXTRA; - case EXTRA: - if (state->flags & 0x0400) { - copy = state->length; - if (copy > have) copy = have; - if (copy) { - if (state->head != Z_NULL && - state->head->extra != Z_NULL) { - len = state->head->extra_len - state->length; - zmemcpy(state->head->extra + len, next, - len + copy > state->head->extra_max ? - state->head->extra_max - len : copy); - } - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - state->length -= copy; - } - if (state->length) goto inf_leave; - } - state->length = 0; - state->mode = NAME; - case NAME: - if (state->flags & 0x0800) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->name != Z_NULL && - state->length < state->head->name_max) - state->head->name[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->name = Z_NULL; - state->length = 0; - state->mode = COMMENT; - case COMMENT: - if (state->flags & 0x1000) { - if (have == 0) goto inf_leave; - copy = 0; - do { - len = (unsigned)(next[copy++]); - if (state->head != Z_NULL && - state->head->comment != Z_NULL && - state->length < state->head->comm_max) - state->head->comment[state->length++] = len; - } while (len && copy < have); - if (state->flags & 0x0200) - state->check = crc32(state->check, next, copy); - have -= copy; - next += copy; - if (len) goto inf_leave; - } - else if (state->head != Z_NULL) - state->head->comment = Z_NULL; - state->mode = HCRC; - case HCRC: - if (state->flags & 0x0200) { - NEEDBITS(16); - if (hold != (state->check & 0xffff)) { - strm->msg = (char *)"header crc mismatch"; - state->mode = BAD; - break; - } - INITBITS(); - } - if (state->head != Z_NULL) { - state->head->hcrc = (int)((state->flags >> 9) & 1); - state->head->done = 1; - } - strm->adler = state->check = crc32(0L, Z_NULL, 0); - state->mode = TYPE; - break; -#endif - case DICTID: - NEEDBITS(32); - strm->adler = state->check = REVERSE(hold); - INITBITS(); - state->mode = DICT; - case DICT: - if (state->havedict == 0) { - RESTORE(); - return Z_NEED_DICT; - } - strm->adler = state->check = adler32(0L, Z_NULL, 0); - state->mode = TYPE; - case TYPE: - if (flush == Z_BLOCK) goto inf_leave; - case TYPEDO: - if (state->last) { - BYTEBITS(); - state->mode = CHECK; - break; - } - NEEDBITS(3); - state->last = BITS(1); - DROPBITS(1); - switch (BITS(2)) { - case 0: /* stored block */ - Tracev((stderr, "inflate: stored block%s\n", - state->last ? " (last)" : "")); - state->mode = STORED; - break; - case 1: /* fixed block */ - fixedtables(state); - Tracev((stderr, "inflate: fixed codes block%s\n", - state->last ? " (last)" : "")); - state->mode = LEN; /* decode codes */ - break; - case 2: /* dynamic block */ - Tracev((stderr, "inflate: dynamic codes block%s\n", - state->last ? " (last)" : "")); - state->mode = TABLE; - break; - case 3: - strm->msg = (char *)"invalid block type"; - state->mode = BAD; - } - DROPBITS(2); - break; - case STORED: - BYTEBITS(); /* go to byte boundary */ - NEEDBITS(32); - if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { - strm->msg = (char *)"invalid stored block lengths"; - state->mode = BAD; - break; - } - state->length = (unsigned)hold & 0xffff; - Tracev((stderr, "inflate: stored length %u\n", - state->length)); - INITBITS(); - state->mode = COPY; - case COPY: - copy = state->length; - if (copy) { - if (copy > have) copy = have; - if (copy > left) copy = left; - if (copy == 0) goto inf_leave; - zmemcpy(put, next, copy); - have -= copy; - next += copy; - left -= copy; - put += copy; - state->length -= copy; - break; - } - Tracev((stderr, "inflate: stored end\n")); - state->mode = TYPE; - break; - case TABLE: - NEEDBITS(14); - state->nlen = BITS(5) + 257; - DROPBITS(5); - state->ndist = BITS(5) + 1; - DROPBITS(5); - state->ncode = BITS(4) + 4; - DROPBITS(4); -#ifndef PKZIP_BUG_WORKAROUND - if (state->nlen > 286 || state->ndist > 30) { - strm->msg = (char *)"too many length or distance symbols"; - state->mode = BAD; - break; - } -#endif - Tracev((stderr, "inflate: table sizes ok\n")); - state->have = 0; - state->mode = LENLENS; - case LENLENS: - while (state->have < state->ncode) { - NEEDBITS(3); - state->lens[order[state->have++]] = (unsigned short)BITS(3); - DROPBITS(3); - } - while (state->have < 19) - state->lens[order[state->have++]] = 0; - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 7; - ret = inflate_table(CODES, state->lens, 19, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid code lengths set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: code lengths ok\n")); - state->have = 0; - state->mode = CODELENS; - case CODELENS: - while (state->have < state->nlen + state->ndist) { - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.val < 16) { - NEEDBITS(this.bits); - DROPBITS(this.bits); - state->lens[state->have++] = this.val; - } - else { - if (this.val == 16) { - NEEDBITS(this.bits + 2); - DROPBITS(this.bits); - if (state->have == 0) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - len = state->lens[state->have - 1]; - copy = 3 + BITS(2); - DROPBITS(2); - } - else if (this.val == 17) { - NEEDBITS(this.bits + 3); - DROPBITS(this.bits); - len = 0; - copy = 3 + BITS(3); - DROPBITS(3); - } - else { - NEEDBITS(this.bits + 7); - DROPBITS(this.bits); - len = 0; - copy = 11 + BITS(7); - DROPBITS(7); - } - if (state->have + copy > state->nlen + state->ndist) { - strm->msg = (char *)"invalid bit length repeat"; - state->mode = BAD; - break; - } - while (copy--) - state->lens[state->have++] = (unsigned short)len; - } - } - - /* handle error breaks in while */ - if (state->mode == BAD) break; - - /* build code tables */ - state->next = state->codes; - state->lencode = (code const FAR *)(state->next); - state->lenbits = 9; - ret = inflate_table(LENS, state->lens, state->nlen, &(state->next), - &(state->lenbits), state->work); - if (ret) { - strm->msg = (char *)"invalid literal/lengths set"; - state->mode = BAD; - break; - } - state->distcode = (code const FAR *)(state->next); - state->distbits = 6; - ret = inflate_table(DISTS, state->lens + state->nlen, state->ndist, - &(state->next), &(state->distbits), state->work); - if (ret) { - strm->msg = (char *)"invalid distances set"; - state->mode = BAD; - break; - } - Tracev((stderr, "inflate: codes ok\n")); - state->mode = LEN; - case LEN: - if (have >= 6 && left >= 258) { - RESTORE(); - inflate_fast(strm, out); - LOAD(); - break; - } - for (;;) { - this = state->lencode[BITS(state->lenbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if (this.op && (this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->lencode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - state->length = (unsigned)this.val; - if ((int)(this.op) == 0) { - Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ? - "inflate: literal '%c'\n" : - "inflate: literal 0x%02x\n", this.val)); - state->mode = LIT; - break; - } - if (this.op & 32) { - Tracevv((stderr, "inflate: end of block\n")); - state->mode = TYPE; - break; - } - if (this.op & 64) { - strm->msg = (char *)"invalid literal/length code"; - state->mode = BAD; - break; - } - state->extra = (unsigned)(this.op) & 15; - state->mode = LENEXT; - case LENEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->length += BITS(state->extra); - DROPBITS(state->extra); - } - Tracevv((stderr, "inflate: length %u\n", state->length)); - state->mode = DIST; - case DIST: - for (;;) { - this = state->distcode[BITS(state->distbits)]; - if ((unsigned)(this.bits) <= bits) break; - PULLBYTE(); - } - if ((this.op & 0xf0) == 0) { - last = this; - for (;;) { - this = state->distcode[last.val + - (BITS(last.bits + last.op) >> last.bits)]; - if ((unsigned)(last.bits + this.bits) <= bits) break; - PULLBYTE(); - } - DROPBITS(last.bits); - } - DROPBITS(this.bits); - if (this.op & 64) { - strm->msg = (char *)"invalid distance code"; - state->mode = BAD; - break; - } - state->offset = (unsigned)this.val; - state->extra = (unsigned)(this.op) & 15; - state->mode = DISTEXT; - case DISTEXT: - if (state->extra) { - NEEDBITS(state->extra); - state->offset += BITS(state->extra); - DROPBITS(state->extra); - } -#ifdef INFLATE_STRICT - if (state->offset > state->dmax) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } -#endif - if (state->offset > state->whave + out - left) { - strm->msg = (char *)"invalid distance too far back"; - state->mode = BAD; - break; - } - Tracevv((stderr, "inflate: distance %u\n", state->offset)); - state->mode = MATCH; - case MATCH: - if (left == 0) goto inf_leave; - copy = out - left; - if (state->offset > copy) { /* copy from window */ - copy = state->offset - copy; - if (copy > state->write) { - copy -= state->write; - from = state->window + (state->wsize - copy); - } - else - from = state->window + (state->write - copy); - if (copy > state->length) copy = state->length; - } - else { /* copy from output */ - from = put - state->offset; - copy = state->length; - } - if (copy > left) copy = left; - left -= copy; - state->length -= copy; - do { - *put++ = *from++; - } while (--copy); - if (state->length == 0) state->mode = LEN; - break; - case LIT: - if (left == 0) goto inf_leave; - *put++ = (unsigned char)(state->length); - left--; - state->mode = LEN; - break; - case CHECK: - if (state->wrap) { - NEEDBITS(32); - out -= left; - strm->total_out += out; - state->total += out; - if (out) - strm->adler = state->check = - UPDATE(state->check, put - out, out); - out = left; - if (( -#ifdef GUNZIP - state->flags ? hold : -#endif - REVERSE(hold)) != state->check) { - strm->msg = (char *)"incorrect data check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: check matches trailer\n")); - } -#ifdef GUNZIP - state->mode = LENGTH; - case LENGTH: - if (state->wrap && state->flags) { - NEEDBITS(32); - if (hold != (state->total & 0xffffffffUL)) { - strm->msg = (char *)"incorrect length check"; - state->mode = BAD; - break; - } - INITBITS(); - Tracev((stderr, "inflate: length matches trailer\n")); - } -#endif - state->mode = DONE; - case DONE: - ret = Z_STREAM_END; - goto inf_leave; - case BAD: - ret = Z_DATA_ERROR; - goto inf_leave; - case MEM: - return Z_MEM_ERROR; - case SYNC: - default: - return Z_STREAM_ERROR; - } - - /* - Return from inflate(), updating the total counts and the check value. - If there was no progress during the inflate() call, return a buffer - error. Call updatewindow() to create and/or update the window state. - Note: a memory error from inflate() is non-recoverable. - */ - inf_leave: - RESTORE(); - if (state->wsize || (state->mode < CHECK && out != strm->avail_out)) - if (updatewindow(strm, out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - in -= strm->avail_in; - out -= strm->avail_out; - strm->total_in += in; - strm->total_out += out; - state->total += out; - if (state->wrap && out) - strm->adler = state->check = - UPDATE(state->check, strm->next_out - out, out); - strm->data_type = state->bits + (state->last ? 64 : 0) + - (state->mode == TYPE ? 128 : 0); - if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK) - ret = Z_BUF_ERROR; - return ret; -} - -int ZEXPORT inflateEnd(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->window != Z_NULL) ZFREE(strm, state->window); - ZFREE(strm, strm->state); - strm->state = Z_NULL; - Tracev((stderr, "inflate: end\n")); - return Z_OK; -} - -int ZEXPORT inflateSetDictionary(strm, dictionary, dictLength) -z_streamp strm; -const Bytef *dictionary; -uInt dictLength; -{ - struct inflate_state FAR *state; - unsigned long id; - - /* check state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (state->wrap != 0 && state->mode != DICT) - return Z_STREAM_ERROR; - - /* check for correct dictionary id */ - if (state->mode == DICT) { - id = adler32(0L, Z_NULL, 0); - id = adler32(id, dictionary, dictLength); - if (id != state->check) - return Z_DATA_ERROR; - } - - /* copy dictionary to window */ - if (updatewindow(strm, strm->avail_out)) { - state->mode = MEM; - return Z_MEM_ERROR; - } - if (dictLength > state->wsize) { - zmemcpy(state->window, dictionary + dictLength - state->wsize, - state->wsize); - state->whave = state->wsize; - } - else { - zmemcpy(state->window + state->wsize - dictLength, dictionary, - dictLength); - state->whave = dictLength; - } - state->havedict = 1; - Tracev((stderr, "inflate: dictionary set\n")); - return Z_OK; -} - -int ZEXPORT inflateGetHeader(strm, head) -z_streamp strm; -gz_headerp head; -{ - struct inflate_state FAR *state; - - /* check state */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if ((state->wrap & 2) == 0) return Z_STREAM_ERROR; - - /* save header structure */ - state->head = head; - head->done = 0; - return Z_OK; -} - -/* - Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found - or when out of input. When called, *have is the number of pattern bytes - found in order so far, in 0..3. On return *have is updated to the new - state. If on return *have equals four, then the pattern was found and the - return value is how many bytes were read including the last byte of the - pattern. If *have is less than four, then the pattern has not been found - yet and the return value is len. In the latter case, syncsearch() can be - called again with more data and the *have state. *have is initialized to - zero for the first call. - */ -local unsigned syncsearch(have, buf, len) -unsigned FAR *have; -unsigned char FAR *buf; -unsigned len; -{ - unsigned got; - unsigned next; - - got = *have; - next = 0; - while (next < len && got < 4) { - if ((int)(buf[next]) == (got < 2 ? 0 : 0xff)) - got++; - else if (buf[next]) - got = 0; - else - got = 4 - got; - next++; - } - *have = got; - return next; -} - -int ZEXPORT inflateSync(strm) -z_streamp strm; -{ - unsigned len; /* number of bytes to look at or looked at */ - unsigned long in, out; /* temporary to save total_in and total_out */ - unsigned char buf[4]; /* to restore bit buffer to byte string */ - struct inflate_state FAR *state; - - /* check parameters */ - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - if (strm->avail_in == 0 && state->bits < 8) return Z_BUF_ERROR; - - /* if first time, start search in bit buffer */ - if (state->mode != SYNC) { - state->mode = SYNC; - state->hold <<= state->bits & 7; - state->bits -= state->bits & 7; - len = 0; - while (state->bits >= 8) { - buf[len++] = (unsigned char)(state->hold); - state->hold >>= 8; - state->bits -= 8; - } - state->have = 0; - syncsearch(&(state->have), buf, len); - } - - /* search available input */ - len = syncsearch(&(state->have), strm->next_in, strm->avail_in); - strm->avail_in -= len; - strm->next_in += len; - strm->total_in += len; - - /* return no joy or set up to restart inflate() on a new block */ - if (state->have != 4) return Z_DATA_ERROR; - in = strm->total_in; out = strm->total_out; - inflateReset(strm); - strm->total_in = in; strm->total_out = out; - state->mode = TYPE; - return Z_OK; -} - -/* - Returns true if inflate is currently at the end of a block generated by - Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP - implementation to provide an additional safety check. PPP uses - Z_SYNC_FLUSH but removes the length bytes of the resulting empty stored - block. When decompressing, PPP checks that at the end of input packet, - inflate is waiting for these length bytes. - */ -int ZEXPORT inflateSyncPoint(strm) -z_streamp strm; -{ - struct inflate_state FAR *state; - - if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)strm->state; - return state->mode == STORED && state->bits == 0; -} - -int ZEXPORT inflateCopy(dest, source) -z_streamp dest; -z_streamp source; -{ - struct inflate_state FAR *state; - struct inflate_state FAR *copy; - unsigned char FAR *window; - unsigned wsize; - - /* check input */ - if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL || - source->zalloc == (alloc_func)0 || source->zfree == (free_func)0) - return Z_STREAM_ERROR; - state = (struct inflate_state FAR *)source->state; - - /* allocate space */ - copy = (struct inflate_state FAR *) - ZALLOC(source, 1, sizeof(struct inflate_state)); - if (copy == Z_NULL) return Z_MEM_ERROR; - window = Z_NULL; - if (state->window != Z_NULL) { - window = (unsigned char FAR *) - ZALLOC(source, 1U << state->wbits, sizeof(unsigned char)); - if (window == Z_NULL) { - ZFREE(source, copy); - return Z_MEM_ERROR; - } - } - - /* copy state */ - zmemcpy(dest, source, sizeof(z_stream)); - zmemcpy(copy, state, sizeof(struct inflate_state)); - if (state->lencode >= state->codes && - state->lencode <= state->codes + ENOUGH - 1) { - copy->lencode = copy->codes + (state->lencode - state->codes); - copy->distcode = copy->codes + (state->distcode - state->codes); - } - copy->next = copy->codes + (state->next - state->codes); - if (window != Z_NULL) { - wsize = 1U << state->wbits; - zmemcpy(window, state->window, wsize); - } - copy->window = window; - dest->state = (struct internal_state FAR *)copy; - return Z_OK; -} diff --git a/lib/zlib/src/inftrees.c b/lib/zlib/src/inftrees.c deleted file mode 100644 index 8a9c13f..0000000 --- a/lib/zlib/src/inftrees.c +++ /dev/null @@ -1,329 +0,0 @@ -/* inftrees.c -- generate Huffman trees for efficient decoding - * Copyright (C) 1995-2005 Mark Adler - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" -#include "inftrees.h" - -#define MAXBITS 15 - -const char inflate_copyright[] = - " inflate 1.2.3 Copyright 1995-2005 Mark Adler "; -/* - If you use the zlib library in a product, an acknowledgment is welcome - in the documentation of your product. If for some reason you cannot - include such an acknowledgment, I would appreciate that you keep this - copyright string in the executable of your product. - */ - -/* - Build a set of tables to decode the provided canonical Huffman code. - The code lengths are lens[0..codes-1]. The result starts at *table, - whose indices are 0..2^bits-1. work is a writable array of at least - lens shorts, which is used as a work area. type is the type of code - to be generated, CODES, LENS, or DISTS. On return, zero is success, - -1 is an invalid code, and +1 means that ENOUGH isn't enough. table - on return points to the next available entry's address. bits is the - requested root table index bits, and on return it is the actual root - table index bits. It will differ if the request is greater than the - longest code or if it is less than the shortest code. - */ -int inflate_table(type, lens, codes, table, bits, work) -codetype type; -unsigned short FAR *lens; -unsigned codes; -code FAR * FAR *table; -unsigned FAR *bits; -unsigned short FAR *work; -{ - unsigned len; /* a code's length in bits */ - unsigned sym; /* index of code symbols */ - unsigned min, max; /* minimum and maximum code lengths */ - unsigned root; /* number of index bits for root table */ - unsigned curr; /* number of index bits for current table */ - unsigned drop; /* code bits to drop for sub-table */ - int left; /* number of prefix codes available */ - unsigned used; /* code entries in table used */ - unsigned huff; /* Huffman code */ - unsigned incr; /* for incrementing code, index */ - unsigned fill; /* index for replicating entries */ - unsigned low; /* low bits for current root entry */ - unsigned mask; /* mask for low root bits */ - code this; /* table entry for duplication */ - code FAR *next; /* next available space in table */ - const unsigned short FAR *base; /* base value table to use */ - const unsigned short FAR *extra; /* extra bits table to use */ - int end; /* use base and extra for symbol > end */ - unsigned short count[MAXBITS+1]; /* number of codes of each length */ - unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ - static const unsigned short lbase[31] = { /* Length codes 257..285 base */ - 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31, - 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0}; - static const unsigned short lext[31] = { /* Length codes 257..285 extra */ - 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18, - 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196}; - static const unsigned short dbase[32] = { /* Distance codes 0..29 base */ - 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193, - 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145, - 8193, 12289, 16385, 24577, 0, 0}; - static const unsigned short dext[32] = { /* Distance codes 0..29 extra */ - 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22, - 23, 23, 24, 24, 25, 25, 26, 26, 27, 27, - 28, 28, 29, 29, 64, 64}; - - /* - Process a set of code lengths to create a canonical Huffman code. The - code lengths are lens[0..codes-1]. Each length corresponds to the - symbols 0..codes-1. The Huffman code is generated by first sorting the - symbols by length from short to long, and retaining the symbol order - for codes with equal lengths. Then the code starts with all zero bits - for the first code of the shortest length, and the codes are integer - increments for the same length, and zeros are appended as the length - increases. For the deflate format, these bits are stored backwards - from their more natural integer increment ordering, and so when the - decoding tables are built in the large loop below, the integer codes - are incremented backwards. - - This routine assumes, but does not check, that all of the entries in - lens[] are in the range 0..MAXBITS. The caller must assure this. - 1..MAXBITS is interpreted as that code length. zero means that that - symbol does not occur in this code. - - The codes are sorted by computing a count of codes for each length, - creating from that a table of starting indices for each length in the - sorted table, and then entering the symbols in order in the sorted - table. The sorted table is work[], with that space being provided by - the caller. - - The length counts are used for other purposes as well, i.e. finding - the minimum and maximum length codes, determining if there are any - codes at all, checking for a valid set of lengths, and looking ahead - at length counts to determine sub-table sizes when building the - decoding tables. - */ - - /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ - for (len = 0; len <= MAXBITS; len++) - count[len] = 0; - for (sym = 0; sym < codes; sym++) - count[lens[sym]]++; - - /* bound code lengths, force root to be within code lengths */ - root = *bits; - for (max = MAXBITS; max >= 1; max--) - if (count[max] != 0) break; - if (root > max) root = max; - if (max == 0) { /* no symbols to code at all */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)1; - this.val = (unsigned short)0; - *(*table)++ = this; /* make a table to force an error */ - *(*table)++ = this; - *bits = 1; - return 0; /* no symbols, but wait for decoding to report error */ - } - for (min = 1; min <= MAXBITS; min++) - if (count[min] != 0) break; - if (root < min) root = min; - - /* check for an over-subscribed or incomplete set of lengths */ - left = 1; - for (len = 1; len <= MAXBITS; len++) { - left <<= 1; - left -= count[len]; - if (left < 0) return -1; /* over-subscribed */ - } - if (left > 0 && (type == CODES || max != 1)) - return -1; /* incomplete set */ - - /* generate offsets into symbol table for each length for sorting */ - offs[1] = 0; - for (len = 1; len < MAXBITS; len++) - offs[len + 1] = offs[len] + count[len]; - - /* sort symbols by length, by symbol order within each length */ - for (sym = 0; sym < codes; sym++) - if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; - - /* - Create and fill in decoding tables. In this loop, the table being - filled is at next and has curr index bits. The code being used is huff - with length len. That code is converted to an index by dropping drop - bits off of the bottom. For codes where len is less than drop + curr, - those top drop + curr - len bits are incremented through all values to - fill the table with replicated entries. - - root is the number of index bits for the root table. When len exceeds - root, sub-tables are created pointed to by the root entry with an index - of the low root bits of huff. This is saved in low to check for when a - new sub-table should be started. drop is zero when the root table is - being filled, and drop is root when sub-tables are being filled. - - When a new sub-table is needed, it is necessary to look ahead in the - code lengths to determine what size sub-table is needed. The length - counts are used for this, and so count[] is decremented as codes are - entered in the tables. - - used keeps track of how many table entries have been allocated from the - provided *table space. It is checked when a LENS table is being made - against the space in *table, ENOUGH, minus the maximum space needed by - the worst case distance code, MAXD. This should never happen, but the - sufficiency of ENOUGH has not been proven exhaustively, hence the check. - This assumes that when type == LENS, bits == 9. - - sym increments through all symbols, and the loop terminates when - all codes of length max, i.e. all codes, have been processed. This - routine permits incomplete codes, so another loop after this one fills - in the rest of the decoding tables with invalid code markers. - */ - - /* set up for code type */ - switch (type) { - case CODES: - base = extra = work; /* dummy value--not used */ - end = 19; - break; - case LENS: - base = lbase; - base -= 257; - extra = lext; - extra -= 257; - end = 256; - break; - default: /* DISTS */ - base = dbase; - extra = dext; - end = -1; - } - - /* initialize state for loop */ - huff = 0; /* starting code */ - sym = 0; /* starting code symbol */ - len = min; /* starting code length */ - next = *table; /* current table to fill in */ - curr = root; /* current table index bits */ - drop = 0; /* current bits to drop from code for index */ - low = (unsigned)(-1); /* trigger new sub-table when len > root */ - used = 1U << root; /* use root table entries */ - mask = used - 1; /* mask for comparing low */ - - /* check available table space */ - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* process all codes and make table entries */ - for (;;) { - /* create table entry */ - this.bits = (unsigned char)(len - drop); - if ((int)(work[sym]) < end) { - this.op = (unsigned char)0; - this.val = work[sym]; - } - else if ((int)(work[sym]) > end) { - this.op = (unsigned char)(extra[work[sym]]); - this.val = base[work[sym]]; - } - else { - this.op = (unsigned char)(32 + 64); /* end of block */ - this.val = 0; - } - - /* replicate for those indices with low len bits equal to huff */ - incr = 1U << (len - drop); - fill = 1U << curr; - min = fill; /* save offset to next table */ - do { - fill -= incr; - next[(huff >> drop) + fill] = this; - } while (fill != 0); - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - - /* go to next symbol, update count, len */ - sym++; - if (--(count[len]) == 0) { - if (len == max) break; - len = lens[work[sym]]; - } - - /* create new sub-table if needed */ - if (len > root && (huff & mask) != low) { - /* if first time, transition to sub-tables */ - if (drop == 0) - drop = root; - - /* increment past last table */ - next += min; /* here min is 1 << curr */ - - /* determine length of next table */ - curr = len - drop; - left = (int)(1 << curr); - while (curr + drop < max) { - left -= count[curr + drop]; - if (left <= 0) break; - curr++; - left <<= 1; - } - - /* check for enough space */ - used += 1U << curr; - if (type == LENS && used >= ENOUGH - MAXD) - return 1; - - /* point entry in root table to sub-table */ - low = huff & mask; - (*table)[low].op = (unsigned char)curr; - (*table)[low].bits = (unsigned char)root; - (*table)[low].val = (unsigned short)(next - *table); - } - } - - /* - Fill in rest of table for incomplete codes. This loop is similar to the - loop above in incrementing huff for table indices. It is assumed that - len is equal to curr + drop, so there is no loop needed to increment - through high index bits. When the current sub-table is filled, the loop - drops back to the root table to fill in any remaining entries there. - */ - this.op = (unsigned char)64; /* invalid code marker */ - this.bits = (unsigned char)(len - drop); - this.val = (unsigned short)0; - while (huff != 0) { - /* when done with sub-table, drop back to root table */ - if (drop != 0 && (huff & mask) != low) { - drop = 0; - len = root; - next = *table; - this.bits = (unsigned char)len; - } - - /* put invalid code marker in table */ - next[huff >> drop] = this; - - /* backwards increment the len-bit code huff */ - incr = 1U << (len - 1); - while (huff & incr) - incr >>= 1; - if (incr != 0) { - huff &= incr - 1; - huff += incr; - } - else - huff = 0; - } - - /* set return parameters */ - *table += used; - *bits = root; - return 0; -} diff --git a/lib/zlib/src/trees.c b/lib/zlib/src/trees.c deleted file mode 100644 index 716179b..0000000 --- a/lib/zlib/src/trees.c +++ /dev/null @@ -1,1217 +0,0 @@ -/* trees.c -- output deflated data using Huffman coding - * Copyright (C) 1995-2005 Jean-loup Gailly - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -/* - * ALGORITHM - * - * The "deflation" process uses several Huffman trees. The more - * common source values are represented by shorter bit sequences. - * - * Each code tree is stored in a compressed form which is itself - * a Huffman encoding of the lengths of all the code strings (in - * ascending order by source values). The actual code strings are - * reconstructed from the lengths in the inflate process, as described - * in the deflate specification. - * - * REFERENCES - * - * Deutsch, L.P.,"'Deflate' Compressed Data Format Specification". - * Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc - * - * Storer, James A. - * Data Compression: Methods and Theory, pp. 49-50. - * Computer Science Press, 1988. ISBN 0-7167-8156-5. - * - * Sedgewick, R. - * Algorithms, p290. - * Addison-Wesley, 1983. ISBN 0-201-06672-6. - */ - -/* #define GEN_TREES_H */ - -#include "deflate.h" - -#ifdef DEBUG -# include <ctype.h> -#endif - -/* =========================================================================== - * Constants - */ - -#define MAX_BL_BITS 7 -/* Bit length codes must not exceed MAX_BL_BITS bits */ - -#define END_BLOCK 256 -/* end of block literal code */ - -#define REP_3_6 16 -/* repeat previous bit length 3-6 times (2 bits of repeat count) */ - -#define REPZ_3_10 17 -/* repeat a zero length 3-10 times (3 bits of repeat count) */ - -#define REPZ_11_138 18 -/* repeat a zero length 11-138 times (7 bits of repeat count) */ - -local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */ - = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0}; - -local const int extra_dbits[D_CODES] /* extra bits for each distance code */ - = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13}; - -local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */ - = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7}; - -local const uch bl_order[BL_CODES] - = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15}; -/* The lengths of the bit length codes are sent in order of decreasing - * probability, to avoid transmitting the lengths for unused bit length codes. - */ - -#define Buf_size (8 * 2*sizeof(char)) -/* Number of bits used within bi_buf. (bi_buf might be implemented on - * more than 16 bits on some systems.) - */ - -/* =========================================================================== - * Local data. These are initialized only once. - */ - -#define DIST_CODE_LEN 512 /* see definition of array dist_code below */ - -#if defined(GEN_TREES_H) || !defined(STDC) -/* non ANSI compilers may not accept trees.h */ - -local ct_data static_ltree[L_CODES+2]; -/* The static literal tree. Since the bit lengths are imposed, there is no - * need for the L_CODES extra codes used during heap construction. However - * The codes 286 and 287 are needed to build a canonical tree (see _tr_init - * below). - */ - -local ct_data static_dtree[D_CODES]; -/* The static distance tree. (Actually a trivial tree since all codes use - * 5 bits.) - */ - -uch _dist_code[DIST_CODE_LEN]; -/* Distance codes. The first 256 values correspond to the distances - * 3 .. 258, the last 256 values correspond to the top 8 bits of - * the 15 bit distances. - */ - -uch _length_code[MAX_MATCH-MIN_MATCH+1]; -/* length code for each normalized match length (0 == MIN_MATCH) */ - -local int base_length[LENGTH_CODES]; -/* First normalized length for each code (0 = MIN_MATCH) */ - -local int base_dist[D_CODES]; -/* First normalized distance for each code (0 = distance of 1) */ - -#else -# include "trees.h" -#endif /* GEN_TREES_H */ - -struct static_tree_desc_s { - const ct_data *static_tree; /* static tree or NULL */ - const intf *extra_bits; /* extra bits for each code or NULL */ - int extra_base; /* base index for extra_bits */ - int elems; /* max number of elements in the tree */ - int max_length; /* max bit length for the codes */ -}; - -local static_tree_desc static_l_desc = -{static_ltree, extra_lbits, LITERALS+1, L_CODES, MAX_BITS}; - -local static_tree_desc static_d_desc = -{static_dtree, extra_dbits, 0, D_CODES, MAX_BITS}; - -local static_tree_desc static_bl_desc = -{(const ct_data *)0, extra_blbits, 0, BL_CODES, MAX_BL_BITS}; - -/* =========================================================================== - * Local (static) routines in this file. - */ - -local void tr_static_init OF((void)); -local void init_block OF((deflate_state *s)); -local void pqdownheap OF((deflate_state *s, ct_data *tree, int k)); -local void gen_bitlen OF((deflate_state *s, tree_desc *desc)); -local void gen_codes OF((ct_data *tree, int max_code, ushf *bl_count)); -local void build_tree OF((deflate_state *s, tree_desc *desc)); -local void scan_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local void send_tree OF((deflate_state *s, ct_data *tree, int max_code)); -local int build_bl_tree OF((deflate_state *s)); -local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes, - int blcodes)); -local void compress_block OF((deflate_state *s, ct_data *ltree, - ct_data *dtree)); -local void set_data_type OF((deflate_state *s)); -local unsigned bi_reverse OF((unsigned value, int length)); -local void bi_windup OF((deflate_state *s)); -local void bi_flush OF((deflate_state *s)); -local void copy_block OF((deflate_state *s, charf *buf, unsigned len, - int header)); - -#ifdef GEN_TREES_H -local void gen_trees_header OF((void)); -#endif - -#ifndef DEBUG -# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len) - /* Send a code of the given tree. c and tree must not have side effects */ - -#else /* DEBUG */ -# define send_code(s, c, tree) \ - { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \ - send_bits(s, tree[c].Code, tree[c].Len); } -#endif - -/* =========================================================================== - * Output a short LSB first on the stream. - * IN assertion: there is enough room in pendingBuf. - */ -#define put_short(s, w) { \ - put_byte(s, (uch)((w) & 0xff)); \ - put_byte(s, (uch)((ush)(w) >> 8)); \ -} - -/* =========================================================================== - * Send a value on a given number of bits. - * IN assertion: length <= 16 and value fits in length bits. - */ -#ifdef DEBUG -local void send_bits OF((deflate_state *s, int value, int length)); - -local void send_bits(s, value, length) - deflate_state *s; - int value; /* value to send */ - int length; /* number of bits */ -{ - Tracevv((stderr," l %2d v %4x ", length, value)); - Assert(length > 0 && length <= 15, "invalid length"); - s->bits_sent += (ulg)length; - - /* If not enough room in bi_buf, use (valid) bits from bi_buf and - * (16 - bi_valid) bits from value, leaving (width - (16-bi_valid)) - * unused bits in value. - */ - if (s->bi_valid > (int)Buf_size - length) { - s->bi_buf |= (value << s->bi_valid); - put_short(s, s->bi_buf); - s->bi_buf = (ush)value >> (Buf_size - s->bi_valid); - s->bi_valid += length - Buf_size; - } else { - s->bi_buf |= value << s->bi_valid; - s->bi_valid += length; - } -} -#else /* !DEBUG */ - -#define send_bits(s, value, length) \ -{ int len = length;\ - if (s->bi_valid > (int)Buf_size - len) {\ - int val = value;\ - s->bi_buf |= (val << s->bi_valid);\ - put_short(s, s->bi_buf);\ - s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\ - s->bi_valid += len - Buf_size;\ - } else {\ - s->bi_buf |= (value) << s->bi_valid;\ - s->bi_valid += len;\ - }\ -} -#endif /* DEBUG */ - - -/* the arguments must not have side effects */ - -/* =========================================================================== - * Initialize the various 'constant' tables. - */ -local void tr_static_init() -{ -#if defined(GEN_TREES_H) || !defined(STDC) - static int static_init_done = 0; - int n; /* iterates over tree elements */ - int bits; /* bit counter */ - int length; /* length value */ - int code; /* code value */ - int dist; /* distance index */ - ush bl_count[MAX_BITS+1]; - /* number of codes at each bit length for an optimal tree */ - - if (static_init_done) return; - - /* For some embedded targets, global variables are not initialized: */ - static_l_desc.static_tree = static_ltree; - static_l_desc.extra_bits = extra_lbits; - static_d_desc.static_tree = static_dtree; - static_d_desc.extra_bits = extra_dbits; - static_bl_desc.extra_bits = extra_blbits; - - /* Initialize the mapping length (0..255) -> length code (0..28) */ - length = 0; - for (code = 0; code < LENGTH_CODES-1; code++) { - base_length[code] = length; - for (n = 0; n < (1<<extra_lbits[code]); n++) { - _length_code[length++] = (uch)code; - } - } - Assert (length == 256, "tr_static_init: length != 256"); - /* Note that the length 255 (match length 258) can be represented - * in two different ways: code 284 + 5 bits or code 285, so we - * overwrite length_code[255] to use the best encoding: - */ - _length_code[length-1] = (uch)code; - - /* Initialize the mapping dist (0..32K) -> dist code (0..29) */ - dist = 0; - for (code = 0 ; code < 16; code++) { - base_dist[code] = dist; - for (n = 0; n < (1<<extra_dbits[code]); n++) { - _dist_code[dist++] = (uch)code; - } - } - Assert (dist == 256, "tr_static_init: dist != 256"); - dist >>= 7; /* from now on, all distances are divided by 128 */ - for ( ; code < D_CODES; code++) { - base_dist[code] = dist << 7; - for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) { - _dist_code[256 + dist++] = (uch)code; - } - } - Assert (dist == 256, "tr_static_init: 256+dist != 512"); - - /* Construct the codes of the static literal tree */ - for (bits = 0; bits <= MAX_BITS; bits++) bl_count[bits] = 0; - n = 0; - while (n <= 143) static_ltree[n++].Len = 8, bl_count[8]++; - while (n <= 255) static_ltree[n++].Len = 9, bl_count[9]++; - while (n <= 279) static_ltree[n++].Len = 7, bl_count[7]++; - while (n <= 287) static_ltree[n++].Len = 8, bl_count[8]++; - /* Codes 286 and 287 do not exist, but we must include them in the - * tree construction to get a canonical Huffman tree (longest code - * all ones) - */ - gen_codes((ct_data *)static_ltree, L_CODES+1, bl_count); - - /* The static distance tree is trivial: */ - for (n = 0; n < D_CODES; n++) { - static_dtree[n].Len = 5; - static_dtree[n].Code = bi_reverse((unsigned)n, 5); - } - static_init_done = 1; - -# ifdef GEN_TREES_H - gen_trees_header(); -# endif -#endif /* defined(GEN_TREES_H) || !defined(STDC) */ -} - -/* =========================================================================== - * Genererate the file trees.h describing the static trees. - */ -#ifdef GEN_TREES_H -# ifndef DEBUG -# include <stdio.h> -# endif - -# define SEPARATOR(i, last, width) \ - ((i) == (last)? "\n};\n\n" : \ - ((i) % (width) == (width)-1 ? ",\n" : ", ")) - -void gen_trees_header() -{ - FILE *header = fopen("trees.h", "w"); - int i; - - Assert (header != NULL, "Can't open trees.h"); - fprintf(header, - "/* header created automatically with -DGEN_TREES_H */\n\n"); - - fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n"); - for (i = 0; i < L_CODES+2; i++) { - fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code, - static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5)); - } - - fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n"); - for (i = 0; i < D_CODES; i++) { - fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code, - static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5)); - } - - fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n"); - for (i = 0; i < DIST_CODE_LEN; i++) { - fprintf(header, "%2u%s", _dist_code[i], - SEPARATOR(i, DIST_CODE_LEN-1, 20)); - } - - fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n"); - for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) { - fprintf(header, "%2u%s", _length_code[i], - SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20)); - } - - fprintf(header, "local const int base_length[LENGTH_CODES] = {\n"); - for (i = 0; i < LENGTH_CODES; i++) { - fprintf(header, "%1u%s", base_length[i], - SEPARATOR(i, LENGTH_CODES-1, 20)); - } - - fprintf(header, "local const int base_dist[D_CODES] = {\n"); - for (i = 0; i < D_CODES; i++) { - fprintf(header, "%5u%s", base_dist[i], - SEPARATOR(i, D_CODES-1, 10)); - } - - fclose(header); -} -#endif /* GEN_TREES_H */ - -/* =========================================================================== - * Initialize the tree data structures for a new zlib stream. - */ -void _tr_init(s) - deflate_state *s; -{ - tr_static_init(); - - s->l_desc.dyn_tree = s->dyn_ltree; - s->l_desc.stat_desc = &static_l_desc; - - s->d_desc.dyn_tree = s->dyn_dtree; - s->d_desc.stat_desc = &static_d_desc; - - s->bl_desc.dyn_tree = s->bl_tree; - s->bl_desc.stat_desc = &static_bl_desc; - - s->bi_buf = 0; - s->bi_valid = 0; - s->last_eob_len = 8; /* enough lookahead for inflate */ -#ifdef DEBUG - s->compressed_len = 0L; - s->bits_sent = 0L; -#endif - - /* Initialize the first block of the first file: */ - init_block(s); -} - -/* =========================================================================== - * Initialize a new block. - */ -local void init_block(s) - deflate_state *s; -{ - int n; /* iterates over tree elements */ - - /* Initialize the trees. */ - for (n = 0; n < L_CODES; n++) s->dyn_ltree[n].Freq = 0; - for (n = 0; n < D_CODES; n++) s->dyn_dtree[n].Freq = 0; - for (n = 0; n < BL_CODES; n++) s->bl_tree[n].Freq = 0; - - s->dyn_ltree[END_BLOCK].Freq = 1; - s->opt_len = s->static_len = 0L; - s->last_lit = s->matches = 0; -} - -#define SMALLEST 1 -/* Index within the heap array of least frequent node in the Huffman tree */ - - -/* =========================================================================== - * Remove the smallest element from the heap and recreate the heap with - * one less element. Updates heap and heap_len. - */ -#define pqremove(s, tree, top) \ -{\ - top = s->heap[SMALLEST]; \ - s->heap[SMALLEST] = s->heap[s->heap_len--]; \ - pqdownheap(s, tree, SMALLEST); \ -} - -/* =========================================================================== - * Compares to subtrees, using the tree depth as tie breaker when - * the subtrees have equal frequency. This minimizes the worst case length. - */ -#define smaller(tree, n, m, depth) \ - (tree[n].Freq < tree[m].Freq || \ - (tree[n].Freq == tree[m].Freq && depth[n] <= depth[m])) - -/* =========================================================================== - * Restore the heap property by moving down the tree starting at node k, - * exchanging a node with the smallest of its two sons if necessary, stopping - * when the heap property is re-established (each father smaller than its - * two sons). - */ -local void pqdownheap(s, tree, k) - deflate_state *s; - ct_data *tree; /* the tree to restore */ - int k; /* node to move down */ -{ - int v = s->heap[k]; - int j = k << 1; /* left son of k */ - while (j <= s->heap_len) { - /* Set j to the smallest of the two sons: */ - if (j < s->heap_len && - smaller(tree, s->heap[j+1], s->heap[j], s->depth)) { - j++; - } - /* Exit if v is smaller than both sons */ - if (smaller(tree, v, s->heap[j], s->depth)) break; - - /* Exchange v with the smallest son */ - s->heap[k] = s->heap[j]; k = j; - - /* And continue down the tree, setting j to the left son of k */ - j <<= 1; - } - s->heap[k] = v; -} - -/* =========================================================================== - * Compute the optimal bit lengths for a tree and update the total bit length - * for the current block. - * IN assertion: the fields freq and dad are set, heap[heap_max] and - * above are the tree nodes sorted by increasing frequency. - * OUT assertions: the field len is set to the optimal bit length, the - * array bl_count contains the frequencies for each bit length. - * The length opt_len is updated; static_len is also updated if stree is - * not null. - */ -local void gen_bitlen(s, desc) - deflate_state *s; - tree_desc *desc; /* the tree descriptor */ -{ - ct_data *tree = desc->dyn_tree; - int max_code = desc->max_code; - const ct_data *stree = desc->stat_desc->static_tree; - const intf *extra = desc->stat_desc->extra_bits; - int base = desc->stat_desc->extra_base; - int max_length = desc->stat_desc->max_length; - int h; /* heap index */ - int n, m; /* iterate over the tree elements */ - int bits; /* bit length */ - int xbits; /* extra bits */ - ush f; /* frequency */ - int overflow = 0; /* number of elements with bit length too large */ - - for (bits = 0; bits <= MAX_BITS; bits++) s->bl_count[bits] = 0; - - /* In a first pass, compute the optimal bit lengths (which may - * overflow in the case of the bit length tree). - */ - tree[s->heap[s->heap_max]].Len = 0; /* root of the heap */ - - for (h = s->heap_max+1; h < HEAP_SIZE; h++) { - n = s->heap[h]; - bits = tree[tree[n].Dad].Len + 1; - if (bits > max_length) bits = max_length, overflow++; - tree[n].Len = (ush)bits; - /* We overwrite tree[n].Dad which is no longer needed */ - - if (n > max_code) continue; /* not a leaf node */ - - s->bl_count[bits]++; - xbits = 0; - if (n >= base) xbits = extra[n-base]; - f = tree[n].Freq; - s->opt_len += (ulg)f * (bits + xbits); - if (stree) s->static_len += (ulg)f * (stree[n].Len + xbits); - } - if (overflow == 0) return; - - Trace((stderr,"\nbit length overflow\n")); - /* This happens for example on obj2 and pic of the Calgary corpus */ - - /* Find the first bit length which could increase: */ - do { - bits = max_length-1; - while (s->bl_count[bits] == 0) bits--; - s->bl_count[bits]--; /* move one leaf down the tree */ - s->bl_count[bits+1] += 2; /* move one overflow item as its brother */ - s->bl_count[max_length]--; - /* The brother of the overflow item also moves one step up, - * but this does not affect bl_count[max_length] - */ - overflow -= 2; - } while (overflow > 0); - - /* Now recompute all bit lengths, scanning in increasing frequency. - * h is still equal to HEAP_SIZE. (It is simpler to reconstruct all - * lengths instead of fixing only the wrong ones. This idea is taken - * from 'ar' written by Haruhiko Okumura.) - */ - for (bits = max_length; bits != 0; bits--) { - n = s->bl_count[bits]; - while (n != 0) { - m = s->heap[--h]; - if (m > max_code) continue; - if ((unsigned) tree[m].Len != (unsigned) bits) { - Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits)); - s->opt_len += ((long)bits - (long)tree[m].Len) - *(long)tree[m].Freq; - tree[m].Len = (ush)bits; - } - n--; - } - } -} - -/* =========================================================================== - * Generate the codes for a given tree and bit counts (which need not be - * optimal). - * IN assertion: the array bl_count contains the bit length statistics for - * the given tree and the field len is set for all tree elements. - * OUT assertion: the field code is set for all tree elements of non - * zero code length. - */ -local void gen_codes (tree, max_code, bl_count) - ct_data *tree; /* the tree to decorate */ - int max_code; /* largest code with non zero frequency */ - ushf *bl_count; /* number of codes at each bit length */ -{ - ush next_code[MAX_BITS+1]; /* next code value for each bit length */ - ush code = 0; /* running code value */ - int bits; /* bit index */ - int n; /* code index */ - - /* The distribution counts are first used to generate the code values - * without bit reversal. - */ - for (bits = 1; bits <= MAX_BITS; bits++) { - next_code[bits] = code = (code + bl_count[bits-1]) << 1; - } - /* Check that the bit counts in bl_count are consistent. The last code - * must be all ones. - */ - Assert (code + bl_count[MAX_BITS]-1 == (1<<MAX_BITS)-1, - "inconsistent bit counts"); - Tracev((stderr,"\ngen_codes: max_code %d ", max_code)); - - for (n = 0; n <= max_code; n++) { - int len = tree[n].Len; - if (len == 0) continue; - /* Now reverse the bits */ - tree[n].Code = bi_reverse(next_code[len]++, len); - - Tracecv(tree != static_ltree, (stderr,"\nn %3d %c l %2d c %4x (%x) ", - n, (isgraph(n) ? n : ' '), len, tree[n].Code, next_code[len]-1)); - } -} - -/* =========================================================================== - * Construct one Huffman tree and assigns the code bit strings and lengths. - * Update the total bit length for the current block. - * IN assertion: the field freq is set for all tree elements. - * OUT assertions: the fields len and code are set to the optimal bit length - * and corresponding code. The length opt_len is updated; static_len is - * also updated if stree is not null. The field max_code is set. - */ -local void build_tree(s, desc) - deflate_state *s; - tree_desc *desc; /* the tree descriptor */ -{ - ct_data *tree = desc->dyn_tree; - const ct_data *stree = desc->stat_desc->static_tree; - int elems = desc->stat_desc->elems; - int n, m; /* iterate over heap elements */ - int max_code = -1; /* largest code with non zero frequency */ - int node; /* new node being created */ - - /* Construct the initial heap, with least frequent element in - * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. - * heap[0] is not used. - */ - s->heap_len = 0, s->heap_max = HEAP_SIZE; - - for (n = 0; n < elems; n++) { - if (tree[n].Freq != 0) { - s->heap[++(s->heap_len)] = max_code = n; - s->depth[n] = 0; - } else { - tree[n].Len = 0; - } - } - - /* The pkzip format requires that at least one distance code exists, - * and that at least one bit should be sent even if there is only one - * possible code. So to avoid special checks later on we force at least - * two codes of non zero frequency. - */ - while (s->heap_len < 2) { - node = s->heap[++(s->heap_len)] = (max_code < 2 ? ++max_code : 0); - tree[node].Freq = 1; - s->depth[node] = 0; - s->opt_len--; if (stree) s->static_len -= stree[node].Len; - /* node is 0 or 1 so it does not have extra bits */ - } - desc->max_code = max_code; - - /* The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, - * establish sub-heaps of increasing lengths: - */ - for (n = s->heap_len/2; n >= 1; n--) pqdownheap(s, tree, n); - - /* Construct the Huffman tree by repeatedly combining the least two - * frequent nodes. - */ - node = elems; /* next internal node of the tree */ - do { - pqremove(s, tree, n); /* n = node of least frequency */ - m = s->heap[SMALLEST]; /* m = node of next least frequency */ - - s->heap[--(s->heap_max)] = n; /* keep the nodes sorted by frequency */ - s->heap[--(s->heap_max)] = m; - - /* Create a new node father of n and m */ - tree[node].Freq = tree[n].Freq + tree[m].Freq; - s->depth[node] = (uch)((s->depth[n] >= s->depth[m] ? - s->depth[n] : s->depth[m]) + 1); - tree[n].Dad = tree[m].Dad = (ush)node; -#ifdef DUMP_BL_TREE - if (tree == s->bl_tree) { - fprintf(stderr,"\nnode %d(%d), sons %d(%d) %d(%d)", - node, tree[node].Freq, n, tree[n].Freq, m, tree[m].Freq); - } -#endif - /* and insert the new node in the heap */ - s->heap[SMALLEST] = node++; - pqdownheap(s, tree, SMALLEST); - - } while (s->heap_len >= 2); - - s->heap[--(s->heap_max)] = s->heap[SMALLEST]; - - /* At this point, the fields freq and dad are set. We can now - * generate the bit lengths. - */ - gen_bitlen(s, (tree_desc *)desc); - - /* The field len is now set, we can generate the bit codes */ - gen_codes ((ct_data *)tree, max_code, s->bl_count); -} - -/* =========================================================================== - * Scan a literal or distance tree to determine the frequencies of the codes - * in the bit length tree. - */ -local void scan_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - if (nextlen == 0) max_count = 138, min_count = 3; - tree[max_code+1].Len = (ush)0xffff; /* guard */ - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - s->bl_tree[curlen].Freq += count; - } else if (curlen != 0) { - if (curlen != prevlen) s->bl_tree[curlen].Freq++; - s->bl_tree[REP_3_6].Freq++; - } else if (count <= 10) { - s->bl_tree[REPZ_3_10].Freq++; - } else { - s->bl_tree[REPZ_11_138].Freq++; - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Send a literal or distance tree in compressed form, using the codes in - * bl_tree. - */ -local void send_tree (s, tree, max_code) - deflate_state *s; - ct_data *tree; /* the tree to be scanned */ - int max_code; /* and its largest code of non zero frequency */ -{ - int n; /* iterates over all tree elements */ - int prevlen = -1; /* last emitted length */ - int curlen; /* length of current code */ - int nextlen = tree[0].Len; /* length of next code */ - int count = 0; /* repeat count of the current code */ - int max_count = 7; /* max repeat count */ - int min_count = 4; /* min repeat count */ - - /* tree[max_code+1].Len = -1; */ /* guard already set */ - if (nextlen == 0) max_count = 138, min_count = 3; - - for (n = 0; n <= max_code; n++) { - curlen = nextlen; nextlen = tree[n+1].Len; - if (++count < max_count && curlen == nextlen) { - continue; - } else if (count < min_count) { - do { send_code(s, curlen, s->bl_tree); } while (--count != 0); - - } else if (curlen != 0) { - if (curlen != prevlen) { - send_code(s, curlen, s->bl_tree); count--; - } - Assert(count >= 3 && count <= 6, " 3_6?"); - send_code(s, REP_3_6, s->bl_tree); send_bits(s, count-3, 2); - - } else if (count <= 10) { - send_code(s, REPZ_3_10, s->bl_tree); send_bits(s, count-3, 3); - - } else { - send_code(s, REPZ_11_138, s->bl_tree); send_bits(s, count-11, 7); - } - count = 0; prevlen = curlen; - if (nextlen == 0) { - max_count = 138, min_count = 3; - } else if (curlen == nextlen) { - max_count = 6, min_count = 3; - } else { - max_count = 7, min_count = 4; - } - } -} - -/* =========================================================================== - * Construct the Huffman tree for the bit lengths and return the index in - * bl_order of the last bit length code to send. - */ -local int build_bl_tree(s) - deflate_state *s; -{ - int max_blindex; /* index of last bit length code of non zero freq */ - - /* Determine the bit length frequencies for literal and distance trees */ - scan_tree(s, (ct_data *)s->dyn_ltree, s->l_desc.max_code); - scan_tree(s, (ct_data *)s->dyn_dtree, s->d_desc.max_code); - - /* Build the bit length tree: */ - build_tree(s, (tree_desc *)(&(s->bl_desc))); - /* opt_len now includes the length of the tree representations, except - * the lengths of the bit lengths codes and the 5+5+4 bits for the counts. - */ - - /* Determine the number of bit length codes to send. The pkzip format - * requires that at least 4 bit length codes be sent. (appnote.txt says - * 3 but the actual value used is 4.) - */ - for (max_blindex = BL_CODES-1; max_blindex >= 3; max_blindex--) { - if (s->bl_tree[bl_order[max_blindex]].Len != 0) break; - } - /* Update opt_len to include the bit length tree and counts */ - s->opt_len += 3*(max_blindex+1) + 5+5+4; - Tracev((stderr, "\ndyn trees: dyn %ld, stat %ld", - s->opt_len, s->static_len)); - - return max_blindex; -} - -/* =========================================================================== - * Send the header for a block using dynamic Huffman trees: the counts, the - * lengths of the bit length codes, the literal tree and the distance tree. - * IN assertion: lcodes >= 257, dcodes >= 1, blcodes >= 4. - */ -local void send_all_trees(s, lcodes, dcodes, blcodes) - deflate_state *s; - int lcodes, dcodes, blcodes; /* number of codes for each tree */ -{ - int rank; /* index in bl_order */ - - Assert (lcodes >= 257 && dcodes >= 1 && blcodes >= 4, "not enough codes"); - Assert (lcodes <= L_CODES && dcodes <= D_CODES && blcodes <= BL_CODES, - "too many codes"); - Tracev((stderr, "\nbl counts: ")); - send_bits(s, lcodes-257, 5); /* not +255 as stated in appnote.txt */ - send_bits(s, dcodes-1, 5); - send_bits(s, blcodes-4, 4); /* not -3 as stated in appnote.txt */ - for (rank = 0; rank < blcodes; rank++) { - Tracev((stderr, "\nbl code %2d ", bl_order[rank])); - send_bits(s, s->bl_tree[bl_order[rank]].Len, 3); - } - Tracev((stderr, "\nbl tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_ltree, lcodes-1); /* literal tree */ - Tracev((stderr, "\nlit tree: sent %ld", s->bits_sent)); - - send_tree(s, (ct_data *)s->dyn_dtree, dcodes-1); /* distance tree */ - Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent)); -} - -/* =========================================================================== - * Send a stored block - */ -void _tr_stored_block(s, buf, stored_len, eof) - deflate_state *s; - charf *buf; /* input block */ - ulg stored_len; /* length of input block */ - int eof; /* true if this is the last block for a file */ -{ - send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */ -#ifdef DEBUG - s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L; - s->compressed_len += (stored_len + 4) << 3; -#endif - copy_block(s, buf, (unsigned)stored_len, 1); /* with header */ -} - -/* =========================================================================== - * Send one empty static block to give enough lookahead for inflate. - * This takes 10 bits, of which 7 may remain in the bit buffer. - * The current inflate code requires 9 bits of lookahead. If the - * last two codes for the previous block (real code plus EOB) were coded - * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode - * the last real code. In this case we send two empty static blocks instead - * of one. (There are no problems if the previous block is stored or fixed.) - * To simplify the code, we assume the worst case of last real code encoded - * on one bit only. - */ -void _tr_align(s) - deflate_state *s; -{ - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); -#ifdef DEBUG - s->compressed_len += 10L; /* 3 for block type, 7 for EOB */ -#endif - bi_flush(s); - /* Of the 10 bits for the empty block, we have already sent - * (10 - bi_valid) bits. The lookahead for the last real code (before - * the EOB of the previous block) was thus at least one plus the length - * of the EOB plus what we have just sent of the empty static block. - */ - if (1 + s->last_eob_len + 10 - s->bi_valid < 9) { - send_bits(s, STATIC_TREES<<1, 3); - send_code(s, END_BLOCK, static_ltree); -#ifdef DEBUG - s->compressed_len += 10L; -#endif - bi_flush(s); - } - s->last_eob_len = 7; -} - -/* =========================================================================== - * Determine the best encoding for the current block: dynamic trees, static - * trees or store, and output the encoded block to the zip file. - */ -void _tr_flush_block(s, buf, stored_len, eof) - deflate_state *s; - charf *buf; /* input block, or NULL if too old */ - ulg stored_len; /* length of input block */ - int eof; /* true if this is the last block for a file */ -{ - ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */ - int max_blindex = 0; /* index of last bit length code of non zero freq */ - - /* Build the Huffman trees unless a stored block is forced */ - if (s->level > 0) { - - /* Check if the file is binary or text */ - if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN) - set_data_type(s); - - /* Construct the literal and distance trees */ - build_tree(s, (tree_desc *)(&(s->l_desc))); - Tracev((stderr, "\nlit data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - - build_tree(s, (tree_desc *)(&(s->d_desc))); - Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, - s->static_len)); - /* At this point, opt_len and static_len are the total bit lengths of - * the compressed block data, excluding the tree representations. - */ - - /* Build the bit length tree for the above two trees, and get the index - * in bl_order of the last bit length code to send. - */ - max_blindex = build_bl_tree(s); - - /* Determine the best encoding. Compute the block lengths in bytes. */ - opt_lenb = (s->opt_len+3+7)>>3; - static_lenb = (s->static_len+3+7)>>3; - - Tracev((stderr, "\nopt %lu(%lu) stat %lu(%lu) stored %lu lit %u ", - opt_lenb, s->opt_len, static_lenb, s->static_len, stored_len, - s->last_lit)); - - if (static_lenb <= opt_lenb) opt_lenb = static_lenb; - - } else { - Assert(buf != (char*)0, "lost buf"); - opt_lenb = static_lenb = stored_len + 5; /* force a stored block */ - } - -#ifdef FORCE_STORED - if (buf != (char*)0) { /* force stored block */ -#else - if (stored_len+4 <= opt_lenb && buf != (char*)0) { - /* 4: two words for the lengths */ -#endif - /* The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. - * Otherwise we can't have processed more than WSIZE input bytes since - * the last block flush, because compression would have been - * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to - * transform a block into a stored block. - */ - _tr_stored_block(s, buf, stored_len, eof); - -#ifdef FORCE_STATIC - } else if (static_lenb >= 0) { /* force static trees */ -#else - } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) { -#endif - send_bits(s, (STATIC_TREES<<1)+eof, 3); - compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree); -#ifdef DEBUG - s->compressed_len += 3 + s->static_len; -#endif - } else { - send_bits(s, (DYN_TREES<<1)+eof, 3); - send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1, - max_blindex+1); - compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree); -#ifdef DEBUG - s->compressed_len += 3 + s->opt_len; -#endif - } - Assert (s->compressed_len == s->bits_sent, "bad compressed size"); - /* The above check is made mod 2^32, for files larger than 512 MB - * and uLong implemented on 32 bits. - */ - init_block(s); - - if (eof) { - bi_windup(s); -#ifdef DEBUG - s->compressed_len += 7; /* align on byte boundary */ -#endif - } - Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3, - s->compressed_len-7*eof)); -} - -/* =========================================================================== - * Save the match info and tally the frequency counts. Return true if - * the current block must be flushed. - */ -int _tr_tally (s, dist, lc) - deflate_state *s; - unsigned dist; /* distance of matched string */ - unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */ -{ - s->d_buf[s->last_lit] = (ush)dist; - s->l_buf[s->last_lit++] = (uch)lc; - if (dist == 0) { - /* lc is the unmatched char */ - s->dyn_ltree[lc].Freq++; - } else { - s->matches++; - /* Here, lc is the match length - MIN_MATCH */ - dist--; /* dist = match distance - 1 */ - Assert((ush)dist < (ush)MAX_DIST(s) && - (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) && - (ush)d_code(dist) < (ush)D_CODES, "_tr_tally: bad match"); - - s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++; - s->dyn_dtree[d_code(dist)].Freq++; - } - -#ifdef TRUNCATE_BLOCK - /* Try to guess if it is profitable to stop the current block here */ - if ((s->last_lit & 0x1fff) == 0 && s->level > 2) { - /* Compute an upper bound for the compressed length */ - ulg out_length = (ulg)s->last_lit*8L; - ulg in_length = (ulg)((long)s->strstart - s->block_start); - int dcode; - for (dcode = 0; dcode < D_CODES; dcode++) { - out_length += (ulg)s->dyn_dtree[dcode].Freq * - (5L+extra_dbits[dcode]); - } - out_length >>= 3; - Tracev((stderr,"\nlast_lit %u, in %ld, out ~%ld(%ld%%) ", - s->last_lit, in_length, out_length, - 100L - out_length*100L/in_length)); - if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1; - } -#endif - return (s->last_lit == s->lit_bufsize-1); - /* We avoid equality with lit_bufsize because of wraparound at 64K - * on 16 bit machines and because stored blocks are restricted to - * 64K-1 bytes. - */ -} - -/* =========================================================================== - * Send the block data compressed using the given Huffman trees - */ -local void compress_block(s, ltree, dtree) - deflate_state *s; - ct_data *ltree; /* literal tree */ - ct_data *dtree; /* distance tree */ -{ - unsigned dist; /* distance of matched string */ - int lc; /* match length or unmatched char (if dist == 0) */ - unsigned lx = 0; /* running index in l_buf */ - unsigned code; /* the code to send */ - int extra; /* number of extra bits to send */ - - if (s->last_lit != 0) do { - dist = s->d_buf[lx]; - lc = s->l_buf[lx++]; - if (dist == 0) { - send_code(s, lc, ltree); /* send a literal byte */ - Tracecv(isgraph(lc), (stderr," '%c' ", lc)); - } else { - /* Here, lc is the match length - MIN_MATCH */ - code = _length_code[lc]; - send_code(s, code+LITERALS+1, ltree); /* send the length code */ - extra = extra_lbits[code]; - if (extra != 0) { - lc -= base_length[code]; - send_bits(s, lc, extra); /* send the extra length bits */ - } - dist--; /* dist is now the match distance - 1 */ - code = d_code(dist); - Assert (code < D_CODES, "bad d_code"); - - send_code(s, code, dtree); /* send the distance code */ - extra = extra_dbits[code]; - if (extra != 0) { - dist -= base_dist[code]; - send_bits(s, dist, extra); /* send the extra distance bits */ - } - } /* literal or match pair ? */ - - /* Check that the overlay between pending_buf and d_buf+l_buf is ok: */ - Assert((uInt)(s->pending) < s->lit_bufsize + 2*lx, - "pendingBuf overflow"); - - } while (lx < s->last_lit); - - send_code(s, END_BLOCK, ltree); - s->last_eob_len = ltree[END_BLOCK].Len; -} - -/* =========================================================================== - * Set the data type to BINARY or TEXT, using a crude approximation: - * set it to Z_TEXT if all symbols are either printable characters (33 to 255) - * or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise. - * IN assertion: the fields Freq of dyn_ltree are set. - */ -local void set_data_type(s) - deflate_state *s; -{ - int n; - - for (n = 0; n < 9; n++) - if (s->dyn_ltree[n].Freq != 0) - break; - if (n == 9) - for (n = 14; n < 32; n++) - if (s->dyn_ltree[n].Freq != 0) - break; - s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY; -} - -/* =========================================================================== - * Reverse the first len bits of a code, using straightforward code (a faster - * method would use a table) - * IN assertion: 1 <= len <= 15 - */ -local unsigned bi_reverse(code, len) - unsigned code; /* the value to invert */ - int len; /* its bit length */ -{ - register unsigned res = 0; - do { - res |= code & 1; - code >>= 1, res <<= 1; - } while (--len > 0); - return res >> 1; -} - -/* =========================================================================== - * Flush the bit buffer, keeping at most 7 bits in it. - */ -local void bi_flush(s) - deflate_state *s; -{ - if (s->bi_valid == 16) { - put_short(s, s->bi_buf); - s->bi_buf = 0; - s->bi_valid = 0; - } else if (s->bi_valid >= 8) { - put_byte(s, (Byte)s->bi_buf); - s->bi_buf >>= 8; - s->bi_valid -= 8; - } -} - -/* =========================================================================== - * Flush the bit buffer and align the output on a byte boundary - */ -local void bi_windup(s) - deflate_state *s; -{ - if (s->bi_valid > 8) { - put_short(s, s->bi_buf); - } else if (s->bi_valid > 0) { - put_byte(s, (Byte)s->bi_buf); - } - s->bi_buf = 0; - s->bi_valid = 0; -#ifdef DEBUG - s->bits_sent = (s->bits_sent+7) & ~7; -#endif -} - -/* =========================================================================== - * Copy a stored block, storing first the length and its - * one's complement if requested. - */ -local void copy_block(s, buf, len, header) - deflate_state *s; - charf *buf; /* the input data */ - unsigned len; /* its length */ - int header; /* true if block header must be written */ -{ - bi_windup(s); /* align on byte boundary */ - s->last_eob_len = 8; /* enough lookahead for inflate */ - - if (header) { - put_short(s, (ush)len); - put_short(s, (ush)~len); -#ifdef DEBUG - s->bits_sent += 2*16; -#endif - } -#ifdef DEBUG - s->bits_sent += (ulg)len<<3; -#endif - while (len--) { - put_byte(s, *buf++); - } -} diff --git a/lib/zlib/src/uncompr.c b/lib/zlib/src/uncompr.c deleted file mode 100644 index 42ac98c..0000000 --- a/lib/zlib/src/uncompr.c +++ /dev/null @@ -1,59 +0,0 @@ -/* uncompr.c -- decompress a memory buffer - * Copyright (C) 1995-2003 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#define ZLIB_INTERNAL -#include "zlib.h" - -/* =========================================================================== - Decompresses the source buffer into the destination buffer. sourceLen is - the byte length of the source buffer. Upon entry, destLen is the total - size of the destination buffer, which must be large enough to hold the - entire uncompressed data. (The size of the uncompressed data must have - been saved previously by the compressor and transmitted to the decompressor - by some mechanism outside the scope of this compression library.) - Upon exit, destLen is the actual size of the compressed buffer. - This function can be used to decompress a whole file at once if the - input file is mmap'ed. - - uncompress returns Z_OK if success, Z_MEM_ERROR if there was not - enough memory, Z_BUF_ERROR if there was not enough room in the output - buffer, or Z_DATA_ERROR if the input data was corrupted. -*/ -int ZEXPORT uncompress (dest, destLen, source, sourceLen) - Bytef *dest; - uLongf *destLen; - const Bytef *source; - uLong sourceLen; -{ - z_stream stream; - int err; - - stream.next_in = (Bytef*)source; - stream.avail_in = (uInt)sourceLen; - /* Check for source > 64K on 16-bit machine: */ - if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR; - - stream.next_out = dest; - stream.avail_out = (uInt)*destLen; - if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR; - - stream.zalloc = (alloc_func)0; - stream.zfree = (free_func)0; - - err = inflateInit(&stream); - if (err != Z_OK) return err; - - err = inflate(&stream, Z_FINISH); - if (err != Z_STREAM_END) { - inflateEnd(&stream); - if (err == Z_NEED_DICT || (err == Z_BUF_ERROR && stream.avail_in == 0)) - return Z_DATA_ERROR; - return err; - } - *destLen = stream.total_out; - - err = inflateEnd(&stream); - return err; -} diff --git a/lib/zlib/src/zutil.c b/lib/zlib/src/zutil.c deleted file mode 100644 index 67ec729..0000000 --- a/lib/zlib/src/zutil.c +++ /dev/null @@ -1,316 +0,0 @@ -/* zutil.c -- target dependent utility functions for the compression library - * Copyright (C) 1995-2005 Jean-loup Gailly. - * For conditions of distribution and use, see copyright notice in zlib.h - */ - -#include "zutil.h" - -#ifndef NO_DUMMY_DECL -struct internal_state {int dummy;}; /* for buggy compilers */ -#endif - -const char * const z_errmsg[10] = { -"need dictionary", /* Z_NEED_DICT 2 */ -"stream end", /* Z_STREAM_END 1 */ -"", /* Z_OK 0 */ -"file error", /* Z_ERRNO (-1) */ -"stream error", /* Z_STREAM_ERROR (-2) */ -"data error", /* Z_DATA_ERROR (-3) */ -"insufficient memory", /* Z_MEM_ERROR (-4) */ -"buffer error", /* Z_BUF_ERROR (-5) */ -"incompatible version",/* Z_VERSION_ERROR (-6) */ -""}; - - -const char * ZEXPORT zlibVersion() -{ - return ZLIB_VERSION; -} - -uLong ZEXPORT zlibCompileFlags() -{ - uLong flags; - - flags = 0; - switch (sizeof(uInt)) { - case 2: break; - case 4: flags += 1; break; - case 8: flags += 2; break; - default: flags += 3; - } - switch (sizeof(uLong)) { - case 2: break; - case 4: flags += 1 << 2; break; - case 8: flags += 2 << 2; break; - default: flags += 3 << 2; - } - switch (sizeof(voidpf)) { - case 2: break; - case 4: flags += 1 << 4; break; - case 8: flags += 2 << 4; break; - default: flags += 3 << 4; - } - switch (sizeof(z_off_t)) { - case 2: break; - case 4: flags += 1 << 6; break; - case 8: flags += 2 << 6; break; - default: flags += 3 << 6; - } -#ifdef DEBUG - flags += 1 << 8; -#endif -#if defined(ASMV) || defined(ASMINF) - flags += 1 << 9; -#endif -#ifdef ZLIB_WINAPI - flags += 1 << 10; -#endif -#ifdef BUILDFIXED - flags += 1 << 12; -#endif -#ifdef DYNAMIC_CRC_TABLE - flags += 1 << 13; -#endif -#ifdef NO_GZCOMPRESS - flags += 1L << 16; -#endif -#ifdef NO_GZIP - flags += 1L << 17; -#endif -#ifdef PKZIP_BUG_WORKAROUND - flags += 1L << 20; -#endif -#ifdef FASTEST - flags += 1L << 21; -#endif -#ifdef STDC -# ifdef NO_vsnprintf - flags += 1L << 25; -# ifdef HAS_vsprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_vsnprintf_void - flags += 1L << 26; -# endif -# endif -#else - flags += 1L << 24; -# ifdef NO_snprintf - flags += 1L << 25; -# ifdef HAS_sprintf_void - flags += 1L << 26; -# endif -# else -# ifdef HAS_snprintf_void - flags += 1L << 26; -# endif -# endif -#endif - return flags; -} - -#ifdef DEBUG - -# ifndef verbose -# define verbose 0 -# endif -int z_verbose = verbose; - -void z_error (m) - char *m; -{ - fprintf(stderr, "%s\n", m); - exit(1); -} -#endif - -/* exported to allow conversion of error code to string for compress() and - * uncompress() - */ -const char * ZEXPORT zError(err) - int err; -{ - return ERR_MSG(err); -} - -#if defined(_WIN32_WCE) - /* The Microsoft C Run-Time Library for Windows CE doesn't have - * errno. We define it as a global variable to simplify porting. - * Its value is always 0 and should not be used. - */ - int errno = 0; -#endif - -#ifndef HAVE_MEMCPY - -void zmemcpy(dest, source, len) - Bytef* dest; - const Bytef* source; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = *source++; /* ??? to be unrolled */ - } while (--len != 0); -} - -int zmemcmp(s1, s2, len) - const Bytef* s1; - const Bytef* s2; - uInt len; -{ - uInt j; - - for (j = 0; j < len; j++) { - if (s1[j] != s2[j]) return 2*(s1[j] > s2[j])-1; - } - return 0; -} - -void zmemzero(dest, len) - Bytef* dest; - uInt len; -{ - if (len == 0) return; - do { - *dest++ = 0; /* ??? to be unrolled */ - } while (--len != 0); -} -#endif - - -#ifdef SYS16BIT - -#ifdef __TURBOC__ -/* Turbo C in 16-bit mode */ - -# define MY_ZCALLOC - -/* Turbo C malloc() does not allow dynamic allocation of 64K bytes - * and farmalloc(64K) returns a pointer with an offset of 8, so we - * must fix the pointer. Warning: the pointer must be put back to its - * original form in order to free it, use zcfree(). - */ - -#define MAX_PTR 10 -/* 10*64K = 640K */ - -local int next_ptr = 0; - -typedef struct ptr_table_s { - voidpf org_ptr; - voidpf new_ptr; -} ptr_table; - -local ptr_table table[MAX_PTR]; -/* This table is used to remember the original form of pointers - * to large buffers (64K). Such pointers are normalized with a zero offset. - * Since MSDOS is not a preemptive multitasking OS, this table is not - * protected from concurrent access. This hack doesn't work anyway on - * a protected system like OS/2. Use Microsoft C instead. - */ - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - voidpf buf = opaque; /* just to make some compilers happy */ - ulg bsize = (ulg)items*size; - - /* If we allocate less than 65520 bytes, we assume that farmalloc - * will return a usable pointer which doesn't have to be normalized. - */ - if (bsize < 65520L) { - buf = farmalloc(bsize); - if (*(ush*)&buf != 0) return buf; - } else { - buf = farmalloc(bsize + 16L); - } - if (buf == NULL || next_ptr >= MAX_PTR) return NULL; - table[next_ptr].org_ptr = buf; - - /* Normalize the pointer to seg:0 */ - *((ush*)&buf+1) += ((ush)((uch*)buf-0) + 15) >> 4; - *(ush*)&buf = 0; - table[next_ptr++].new_ptr = buf; - return buf; -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - int n; - if (*(ush*)&ptr != 0) { /* object < 64K */ - farfree(ptr); - return; - } - /* Find the original pointer */ - for (n = 0; n < next_ptr; n++) { - if (ptr != table[n].new_ptr) continue; - - farfree(table[n].org_ptr); - while (++n < next_ptr) { - table[n-1] = table[n]; - } - next_ptr--; - return; - } - ptr = opaque; /* just to make some compilers happy */ - Assert(0, "zcfree: ptr not found"); -} - -#endif /* __TURBOC__ */ - - -#ifdef M_I86 -/* Microsoft C in 16-bit mode */ - -# define MY_ZCALLOC - -#if (!defined(_MSC_VER) || (_MSC_VER <= 600)) -# define _halloc halloc -# define _hfree hfree -#endif - -voidpf zcalloc (voidpf opaque, unsigned items, unsigned size) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - return _halloc((long)items, size); -} - -void zcfree (voidpf opaque, voidpf ptr) -{ - if (opaque) opaque = 0; /* to make compiler happy */ - _hfree(ptr); -} - -#endif /* M_I86 */ - -#endif /* SYS16BIT */ - - -#ifndef MY_ZCALLOC /* Any system without a special alloc function */ - -#ifndef STDC -extern voidp malloc OF((uInt size)); -extern voidp calloc OF((uInt items, uInt size)); -extern void free OF((voidpf ptr)); -#endif - -voidpf zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; -{ - if (opaque) items += size - size; /* make compiler happy */ - return sizeof(uInt) > 2 ? (voidpf)malloc(items * size) : - (voidpf)calloc(items, size); -} - -void zcfree (opaque, ptr) - voidpf opaque; - voidpf ptr; -{ - free(ptr); - if (opaque) return; /* make compiler happy */ -} - -#endif /* MY_ZCALLOC */ |