diff options
| -rw-r--r-- | aclocal.m4 | 58 | ||||
| -rw-r--r-- | include/simulator.h | 2 | ||||
| -rw-r--r-- | samples/Makefile.am | 2 | ||||
| -rw-r--r-- | samples/Makefile.samples | 6 |
4 files changed, 31 insertions, 37 deletions
@@ -159,7 +159,7 @@ else fi]) -# serial 40 AC_PROG_LIBTOOL +# serial 39 AC_PROG_LIBTOOL AC_DEFUN(AC_PROG_LIBTOOL, [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl @@ -172,7 +172,7 @@ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \ +$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig @@ -204,11 +204,6 @@ AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl -case "$target" in -NONE) lt_target="$host" ;; -*) lt_target="$target" ;; -esac - # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" @@ -227,7 +222,7 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$lt_target" in +case "$host" in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext @@ -443,6 +438,7 @@ else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_SUBST(LD) AC_PROG_LD_GNU ]) @@ -488,13 +484,14 @@ else fi]) NM="$ac_cv_path_NM" AC_MSG_RESULT([$NM]) +AC_SUBST(NM) ]) # AC_CHECK_LIBM - check for math library AC_DEFUN(AC_CHECK_LIBM, [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= -case "$lt_target" in +case "$host" in *-*-beos* | *-*-cygwin*) # These system don't have libm ;; @@ -509,35 +506,30 @@ esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-convenience to the -# configure arguments. Note that LIBLTDL and INCLTDL are not -# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not -# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed -# with '${top_builddir}/' and INCLTDL will be prefixed with -# '${top_srcdir}/' (note the single quotes!). If your package is not -# flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. +# the libltdl convenience library, adds --enable-ltdl-convenience to +# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor +# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed +# to be `${top_builddir}/libltdl'. Make sure you start DIR with +# '${top_builddir}/' (note the single quotes!) if your package is not +# flat, and, if you're not using automake, define top_builddir as +# appropriate in the Makefiles. AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case "$enable_ltdl_convenience" in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library and INCLTDL to the include flags for -# the libltdl header and adds --enable-ltdl-install to the configure -# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is -# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed -# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will -# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed -# with '${top_srcdir}/' (note the single quotes!). If your package is -# not flat and you're not using automake, define top_builddir and -# top_srcdir appropriately in the Makefiles. +# the libltdl installable library, and adds --enable-ltdl-install to +# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor +# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed +# to be `${top_builddir}/libltdl'. Make sure you start DIR with +# '${top_builddir}/' (note the single quotes!) if your package is not +# flat, and, if you're not using automake, define top_builddir as +# appropriate in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, @@ -550,12 +542,10 @@ AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la - INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" - INCLTDL= fi ]) @@ -568,8 +558,8 @@ AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl +dnl This is just to quiet aclocal about the macro not being used +if(a,b,[AC_DISABLE_FAST_INSTALL])dnl # Macro to add for using GNU gettext. # Ulrich Drepper <drepper@cygnus.com>, 1995. diff --git a/include/simulator.h b/include/simulator.h index d98cf7a..ef22320 100644 --- a/include/simulator.h +++ b/include/simulator.h @@ -2,7 +2,7 @@ #define __SIMULATOR_H__ #include "types.h" -#define TAILLE_MEMOIRE 10240 /* Nombre maximum de mots que peut contenir la mémoire principale */ +#define TAILLE_MEMOIRE 200000 /* Nombre maximum de mots que peut contenir la mémoire principale */ #define NB_REGISTRES_PHYSIQUES 64 /* Nombre réel de registres */ #define NB_REGISTRES_UTILISABLES 32 /* Nombre de registres que le processeur a à sa disposition */ #define REG_RG 32 /* Numero du registre Rg */ diff --git a/samples/Makefile.am b/samples/Makefile.am index 9b8c2aa..f249a6d 100644 --- a/samples/Makefile.am +++ b/samples/Makefile.am @@ -1,4 +1,4 @@ -EXTRA_DIST = fichier1.s fichier2.s rechcara.s recherche.s sommeentiers.s testtout.s Makefile.samples instructions.txt hello.s +EXTRA_DIST = fichier1.s fichier2.s rechcara.s recherche.s sommeentiers.s testtout.s Makefile.samples instructions.txt hello.s boucle.s trig.s drawline.s cube.s all: make -f Makefile.samples diff --git a/samples/Makefile.samples b/samples/Makefile.samples index a638986..d7d45be 100644 --- a/samples/Makefile.samples +++ b/samples/Makefile.samples @@ -10,7 +10,7 @@ chmod 755 $@ rm tmp.o -all: helloworld hello recherche rechcara sommeentiers testtout boucle p4 drawline +all: helloworld hello recherche rechcara sommeentiers testtout boucle p4 drawline cube trig allcube helloworld: fichier1.s fichier2.s ../src/compilo fichier1.s fichier1.o @@ -19,5 +19,9 @@ helloworld: fichier1.s fichier2.s chmod 755 helloworld rm fichier1.o fichier2.o +allcube: cube trig drawline + ../src/linker cube.s drawline.s trig.s cube + rm cube.o drawline.o trig.o + clean: rm -f helloworld recherche rechcara sommeenters testtout *.o __symbols__ __text__ |