diff options
| -rwxr-xr-x | summon-arm-toolchain | 54 |
1 files changed, 54 insertions, 0 deletions
diff --git a/summon-arm-toolchain b/summon-arm-toolchain index b7314cf..2dfbd7c 100755 --- a/summon-arm-toolchain +++ b/summon-arm-toolchain @@ -27,6 +27,8 @@ SUDO= QUIET=0 # Set to 1 to use linaro gcc instead of the FSF gcc USE_LINARO=0 +# Set to 1 to enable building of OpenOCD +OOCD_EN=1 # Set to 1 to build libstm32 provided by ST LIBSTM32_EN=0 # Set to 1 to build libopenstm32 an open source library for stm32 @@ -53,6 +55,7 @@ fi BINUTILS=binutils-2.20 NEWLIB=newlib-1.18.0 GDB=gdb-7.2 +OOCD=master LIBCMSIS=v1.10-2 LIBSTM32=v3.0.0-1 LIBSTM32USB=v3.0.1-1 @@ -121,6 +124,8 @@ case "$(uname)" in --with-mpfr=${DARWIN_OPT_PATH} \ --with-mpc=${DARWIN_OPT_PATH} \ -with-libiconv-prefix=${DARWIN_OPT_PATH}" + OOCD_CFLAGS="-m32 -I/opt/mine/include -I/opt/local/include" + OOCD_LDFLAGS="-L/opt/mine/lib -L/opt/local/lib" ;; CYGWIN*) echo "Found CygWin that means Windows most likely." @@ -191,6 +196,20 @@ fetch ${GCC} ${GCCURL} fetch ${NEWLIB} ftp://sources.redhat.com/pub/newlib/${NEWLIB}.tar.gz fetch ${GDB} http://ftp.gnu.org/gnu/gdb/${GDB}.tar.bz2 +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e openocd-${OOCD}.tar.bz2 ]; then + log "Cloning OpenOCD sources..." + git clone git://openocd.git.sourceforge.net/gitroot/openocd/openocd openocd-${OOCD} + cd openocd-${OOCD} + ./bootstrap + cd .. + tar cfvj openocd-${OOCD}.tar.bz2 openocd-${OOCD} + #git archive --format=tar --prefix=openocd-${OOCD}/ ${OOCD} | \ + # bzip2 --stdout > ../openocd-${OOCD}.tar.bz2 + rm -rf openocd-${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e libcmsis-${LIBCMSIS}.tar.bz2 ]; then log "Cloning libcmsis sources..." @@ -359,6 +378,41 @@ if [ ! -e ${STAMPS}/${GDB}.build ]; then rm -rf build/* ${GDB} fi +if [ ${OOCD_EN} != 0 ]; then +if [ ! -e ${STAMPS}/openocd-${OOCD}.build ]; then + unpack openocd-${OOCD} + cd build + log "Configuring openocd-${OOCD}" + export CFLAGS="${OOCD_CFLAGS}" + export LDFLAGS="${OOCD_LDFLAGS}" + ../openocd-${OOCD}/configure --enable-maintainer-mode \ + --prefix=${PREFIX} \ + --enable-dummy \ + --enable-parport \ + --enable-ft2232_libftdi \ + --enable-usb_blaster_libftdi \ + --enable-amtjtagaccel \ + --enable-zy1000 \ + --enable-ep93xx \ + --enable-at91rm9200 \ + --enable-gw16012 \ + --enable-presto_libftdi \ + --enable-usbprog \ + --enable-jlink \ + --enable-vsllink \ + --enable-rlink \ + --enable-arm-jtag-ew \ + --enable-buspirate + log "Building openocd-${OOCD}" + make ${MAKEFLAGS} + install openocd-${OOCD} install + cd .. + log "Cleaning up openocd-${OOCD}" + touch ${STAMPS}/openocd-${OOCD}.build + rm -rf build/* ${OOCD} +fi +fi + if [ ${LIBSTM32_EN} != 0 ]; then if [ ! -e ${STAMPS}/libcmsis-${LIBCMSIS}.build ]; then unpack libcmsis-${LIBCMSIS} |