Adding basic FreeRTOSConfig.h matching the NXP CMSIS SDK.

1 files changed, 67 insertions, 0 deletions

diff --git a/config/arm/lpc1768/FreeRTOSConfig.h b/config/arm/lpc1768/FreeRTOSConfig.h
new file mode 100644
index 0000000..1874c0c
--- /dev/null
+++ b/config/arm/lpc1768/FreeRTOSConfig.h
@@ -0,0 +1,67 @@
+#ifndef FREERTOS_CONFIG_H
+#define FREERTOS_CONFIG_H
+
+#include "LPC17xx.h"
+
+#define configUSE_PREEMPTION        1
+#define configUSE_IDLE_HOOK         1
+#define configMAX_PRIORITIES        ( ( unsigned portBASE_TYPE ) 5 )
+#define configUSE_TICK_HOOK         1
+#define configCPU_CLOCK_HZ          ( SystemCoreClock )
+#define configTICK_RATE_HZ          ( ( portTickType ) 1000 )
+#define configMINIMAL_STACK_SIZE    ( ( unsigned short ) 128 )
+#define configTOTAL_HEAP_SIZE       ( ( size_t ) ( 19 * 1024 ) )
+#define configMAX_TASK_NAME_LEN     ( 12 )
+#define configUSE_TRACE_FACILITY    0
+#define configUSE_16_BIT_TICKS      0
+#define configIDLE_SHOULD_YIELD     1
+#define configUSE_CO_ROUTINES       0
+#define configUSE_MUTEXES           1
+#define configUSE_NEWLIB_REENTRANT  1
+
+#define configMAX_CO_ROUTINE_PRIORITIES ( 2 )
+
+#define configUSE_COUNTING_SEMAPHORES   0
+#define configUSE_ALTERNATIVE_API       0
+#define configCHECK_FOR_STACK_OVERFLOW  2
+#define configUSE_RECURSIVE_MUTEXES     1
+#define configQUEUE_REGISTRY_SIZE       10
+#define configGENERATE_RUN_TIME_STATS   1
+
+#define INCLUDE_vTaskPrioritySet            1
+#define INCLUDE_uxTaskPriorityGet           1
+#define INCLUDE_vTaskDelete                 1
+#define INCLUDE_vTaskCleanUpResources       0
+#define INCLUDE_vTaskSuspend                1
+#define INCLUDE_vTaskDelayUntil             1
+#define INCLUDE_vTaskDelay                  1
+#define INCLUDE_uxTaskGetStackHighWaterMark 1
+
+/* Use the system definition, if there is one */
+#ifdef __NVIC_PRIO_BITS
+    #define configPRIO_BITS       __NVIC_PRIO_BITS
+#else
+    #define configPRIO_BITS       5        /* 32 priority levels */
+#endif
+
+/* The lowest priority. */
+#define configKERNEL_INTERRUPT_PRIORITY     ( 31 << (8 - configPRIO_BITS) )
+/* Priority 5, or 160 as only the top three bits are implemented. */
+#define configMAX_SYSCALL_INTERRUPT_PRIORITY    ( 5 << (8 - configPRIO_BITS) )
+
+/* Priorities passed to NVIC_SetPriority() do not require shifting as the
+function does the shifting itself.  Note these priorities need to be equal to
+or lower than configMAX_SYSCALL_INTERRUPT_PRIORITY - therefore the numeric
+value needs to be equal to or greater than 5 (on the Cortex M3 the lower the
+numeric value the higher the interrupt priority). */
+#define configEMAC_INTERRUPT_PRIORITY       5
+#define configUSB_INTERRUPT_PRIORITY        6
+
+/*-----------------------------------------------------------
+ * Macros required to setup the timer for the run time stats.
+ *-----------------------------------------------------------*/
+extern void vConfigureTimerForRunTimeStats( void );
+#define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() vConfigureTimerForRunTimeStats()
+#define portGET_RUN_TIME_COUNTER_VALUE() (LPC_TIM0->TC)
+
+#endif /* FREERTOS_CONFIG_H */