diff options
| author | Pixel <pixel@nobis-crew.org> | 2011-01-23 12:15:41 -0800 |
|---|---|---|
| committer | Pixel <pixel@nobis-crew.org> | 2011-01-23 12:15:41 -0800 |
| commit | e4e7b661172477aaa682a9cccfbac89adb1d01f6 (patch) | |
| tree | 2f5416f3d986360813bd0acf3a60962b1e4deaa5 /arch/arm/lpc17xx/Drivers/source/lpc17xx_i2c.c | |
| parent | d291e583a5ee10f13b0f4039a8d114e15799eb7b (diff) | |
Adding basic CMSIS source code; v1.3.0 from the NXP website currently.
Diffstat (limited to 'arch/arm/lpc17xx/Drivers/source/lpc17xx_i2c.c')
| -rw-r--r-- | arch/arm/lpc17xx/Drivers/source/lpc17xx_i2c.c | 1373 |
1 files changed, 1373 insertions, 0 deletions
diff --git a/arch/arm/lpc17xx/Drivers/source/lpc17xx_i2c.c b/arch/arm/lpc17xx/Drivers/source/lpc17xx_i2c.c new file mode 100644 index 0000000..9b54228 --- /dev/null +++ b/arch/arm/lpc17xx/Drivers/source/lpc17xx_i2c.c @@ -0,0 +1,1373 @@ +/***********************************************************************//**
+ * @file lpc17xx_i2c.c
+ * @brief Contains all functions support for I2C firmware library on LPC17xx
+ * @version 2.0
+ * @date 21. May. 2010
+ * @author NXP MCU SW Application Team
+ **************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+ **********************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Includes ------------------------------------------------------------------- */
+#include "lpc17xx_i2c.h"
+#include "lpc17xx_clkpwr.h"
+#include "lpc17xx_pinsel.h"
+
+
+/* If this source file built with example, the LPC17xx FW library configuration
+ * file in each example directory ("lpc17xx_libcfg.h") must be included,
+ * otherwise the default FW library configuration file must be included instead
+ */
+#ifdef __BUILD_WITH_EXAMPLE__
+#include "lpc17xx_libcfg.h"
+#else
+#include "lpc17xx_libcfg_default.h"
+#endif /* __BUILD_WITH_EXAMPLE__ */
+
+
+#ifdef _I2C
+
+
+/* Private Types -------------------------------------------------------------- */
+/** @defgroup I2C_Private_Types I2C Private Types
+ * @{
+ */
+
+/**
+ * @brief I2C device configuration structure type
+ */
+typedef struct
+{
+ uint32_t txrx_setup; /* Transmission setup */
+ int32_t dir; /* Current direction phase, 0 - write, 1 - read */
+} I2C_CFG_T;
+
+/**
+ * @}
+ */
+
+/* Private Variables ---------------------------------------------------------- */
+/**
+ * @brief II2C driver data for I2C0, I2C1 and I2C2
+ */
+static I2C_CFG_T i2cdat[3];
+
+static uint32_t I2C_MasterComplete[3];
+static uint32_t I2C_SlaveComplete[3];
+
+static uint32_t I2C_MonitorBufferIndex;
+
+/* Private Functions ---------------------------------------------------------- */
+
+/* Get I2C number */
+static int32_t I2C_getNum(LPC_I2C_TypeDef *I2Cx);
+
+/* Generate a start condition on I2C bus (in master mode only) */
+static uint32_t I2C_Start (LPC_I2C_TypeDef *I2Cx);
+
+/* Generate a stop condition on I2C bus (in master mode only) */
+static void I2C_Stop (LPC_I2C_TypeDef *I2Cx);
+
+/* I2C send byte subroutine */
+static uint32_t I2C_SendByte (LPC_I2C_TypeDef *I2Cx, uint8_t databyte);
+
+/* I2C get byte subroutine */
+static uint32_t I2C_GetByte (LPC_I2C_TypeDef *I2Cx, uint8_t *retdat, Bool ack);
+
+/* I2C set clock (hz) */
+static void I2C_SetClock (LPC_I2C_TypeDef *I2Cx, uint32_t target_clock);
+
+/*--------------------------------------------------------------------------------*/
+/********************************************************************//**
+ * @brief Convert from I2C peripheral to number
+ * @param[in] I2Cx: I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return I2C number, could be: 0..2
+ *********************************************************************/
+static int32_t I2C_getNum(LPC_I2C_TypeDef *I2Cx){
+ if (I2Cx == LPC_I2C0) {
+ return (0);
+ } else if (I2Cx == LPC_I2C1) {
+ return (1);
+ } else if (I2Cx == LPC_I2C2) {
+ return (2);
+ }
+ return (-1);
+}
+
+/********************************************************************//**
+ * @brief Generate a start condition on I2C bus (in master mode only)
+ * @param[in] I2Cx: I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return value of I2C status register after generate a start condition
+ *********************************************************************/
+static uint32_t I2C_Start (LPC_I2C_TypeDef *I2Cx)
+{
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ I2Cx->I2CONSET = I2C_I2CONSET_STA;
+
+ // Wait for complete
+ while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI));
+ I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
+ return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
+}
+
+/********************************************************************//**
+ * @brief Generate a stop condition on I2C bus (in master mode only)
+ * @param[in] I2Cx: I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return None
+ *********************************************************************/
+static void I2C_Stop (LPC_I2C_TypeDef *I2Cx)
+{
+
+ /* Make sure start bit is not active */
+ if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
+ {
+ I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
+ }
+ I2Cx->I2CONSET = I2C_I2CONSET_STO;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+}
+
+/********************************************************************//**
+ * @brief Send a byte
+ * @param[in] I2Cx: I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] databyte: number of byte
+ * @return value of I2C status register after sending
+ *********************************************************************/
+static uint32_t I2C_SendByte (LPC_I2C_TypeDef *I2Cx, uint8_t databyte)
+{
+ /* Make sure start bit is not active */
+ if (I2Cx->I2CONSET & I2C_I2CONSET_STA)
+ {
+ I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
+ }
+ I2Cx->I2DAT = databyte & I2C_I2DAT_BITMASK;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+
+ while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI));
+ return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
+}
+
+/********************************************************************//**
+ * @brief Get a byte
+ * @param[in] I2Cx: I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[out] retdat pointer to return data
+ * @param[in] ack assert acknowledge or not, should be: TRUE/FALSE
+ * @return value of I2C status register after sending
+ *********************************************************************/
+static uint32_t I2C_GetByte (LPC_I2C_TypeDef *I2Cx, uint8_t *retdat, Bool ack)
+{
+ if (ack == TRUE)
+ {
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ }
+ else
+ {
+ I2Cx->I2CONCLR = I2C_I2CONCLR_AAC;
+ }
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+
+ while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI));
+ *retdat = (uint8_t) (I2Cx->I2DAT & I2C_I2DAT_BITMASK);
+ return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
+}
+
+/*********************************************************************//**
+ * @brief Setup clock rate for I2C peripheral
+ * @param[in] I2Cx I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] target_clock : clock of SSP (Hz)
+ * @return None
+ ***********************************************************************/
+static void I2C_SetClock (LPC_I2C_TypeDef *I2Cx, uint32_t target_clock)
+{
+ uint32_t temp;
+
+ CHECK_PARAM(PARAM_I2Cx(I2Cx));
+
+ // Get PCLK of I2C controller
+ if (I2Cx == LPC_I2C0)
+ {
+ temp = CLKPWR_GetPCLK (CLKPWR_PCLKSEL_I2C0) / target_clock;
+ }
+ else if (I2Cx == LPC_I2C1)
+ {
+ temp = CLKPWR_GetPCLK (CLKPWR_PCLKSEL_I2C1) / target_clock;
+ }
+ else if (I2Cx == LPC_I2C2)
+ {
+ temp = CLKPWR_GetPCLK (CLKPWR_PCLKSEL_I2C1) / target_clock;
+ }
+
+ /* Set the I2C clock value to register */
+ I2Cx->I2SCLH = (uint32_t)(temp / 2);
+ I2Cx->I2SCLL = (uint32_t)(temp - I2Cx->I2SCLH);
+}
+/* End of Private Functions --------------------------------------------------- */
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @addtogroup I2C_Public_Functions
+ * @{
+ */
+
+/********************************************************************//**
+ * @brief Initializes the I2Cx peripheral with specified parameter.
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] clockrate Target clock rate value to initialized I2C
+ * peripheral (Hz)
+ * @return None
+ *********************************************************************/
+void I2C_Init(LPC_I2C_TypeDef *I2Cx, uint32_t clockrate)
+{
+ CHECK_PARAM(PARAM_I2Cx(I2Cx));
+
+ if (I2Cx==LPC_I2C0)
+ {
+ /* Set up clock and power for I2C0 module */
+ CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C0, ENABLE);
+ /* As default, peripheral clock for I2C0 module
+ * is set to FCCLK / 2 */
+ CLKPWR_SetPCLKDiv(CLKPWR_PCLKSEL_I2C0, CLKPWR_PCLKSEL_CCLK_DIV_2);
+ }
+ else if (I2Cx==LPC_I2C1)
+ {
+ /* Set up clock and power for I2C1 module */
+ CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C1, ENABLE);
+ /* As default, peripheral clock for I2C1 module
+ * is set to FCCLK / 2 */
+ CLKPWR_SetPCLKDiv(CLKPWR_PCLKSEL_I2C1, CLKPWR_PCLKSEL_CCLK_DIV_2);
+ }
+ else if (I2Cx==LPC_I2C2)
+ {
+ /* Set up clock and power for I2C2 module */
+ CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C2, ENABLE);
+ /* As default, peripheral clock for I2C2 module
+ * is set to FCCLK / 2 */
+ CLKPWR_SetPCLKDiv(CLKPWR_PCLKSEL_I2C2, CLKPWR_PCLKSEL_CCLK_DIV_2);
+ }
+ else {
+ // Up-Support this device
+ return;
+ }
+
+ /* Set clock rate */
+ I2C_SetClock(I2Cx, clockrate);
+ /* Set I2C operation to default */
+ I2Cx->I2CONCLR = (I2C_I2CONCLR_AAC | I2C_I2CONCLR_STAC | I2C_I2CONCLR_I2ENC);
+}
+
+/*********************************************************************//**
+ * @brief De-initializes the I2C peripheral registers to their
+ * default reset values.
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return None
+ **********************************************************************/
+void I2C_DeInit(LPC_I2C_TypeDef* I2Cx)
+{
+ CHECK_PARAM(PARAM_I2Cx(I2Cx));
+
+ /* Disable I2C control */
+ I2Cx->I2CONCLR = I2C_I2CONCLR_I2ENC;
+
+ if (I2Cx==LPC_I2C0)
+ {
+ /* Disable power for I2C0 module */
+ CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C0, DISABLE);
+ }
+ else if (I2Cx==LPC_I2C1)
+ {
+ /* Disable power for I2C1 module */
+ CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C1, DISABLE);
+ }
+ else if (I2Cx==LPC_I2C2)
+ {
+ /* Disable power for I2C2 module */
+ CLKPWR_ConfigPPWR (CLKPWR_PCONP_PCI2C2, DISABLE);
+ }
+}
+
+/*********************************************************************//**
+ * @brief Enable or disable I2C peripheral's operation
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] NewState New State of I2Cx peripheral's operation
+ * @return none
+ **********************************************************************/
+void I2C_Cmd(LPC_I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+ CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
+ CHECK_PARAM(PARAM_I2Cx(I2Cx));
+
+ if (NewState == ENABLE)
+ {
+ I2Cx->I2CONSET = I2C_I2CONSET_I2EN;
+ }
+ else
+ {
+ I2Cx->I2CONCLR = I2C_I2CONCLR_I2ENC;
+ }
+}
+
+/*********************************************************************//**
+ * @brief Enable/Disable interrupt for I2C peripheral
+ * @param[in] I2Cx I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] NewState New State of I2C peripheral interrupt in NVIC core
+ * should be:
+ * - ENABLE: enable interrupt for this I2C peripheral
+ * - DISABLE: disable interrupt for this I2C peripheral
+ * @return None
+ **********************************************************************/
+void I2C_IntCmd (LPC_I2C_TypeDef *I2Cx, Bool NewState)
+{
+ if (NewState)
+ {
+ if(I2Cx == LPC_I2C0)
+ {
+ NVIC_EnableIRQ(I2C0_IRQn);
+ }
+ else if (I2Cx == LPC_I2C1)
+ {
+ NVIC_EnableIRQ(I2C1_IRQn);
+ }
+ else if (I2Cx == LPC_I2C2)
+ {
+ NVIC_EnableIRQ(I2C2_IRQn);
+ }
+ }
+ else
+ {
+ if(I2Cx == LPC_I2C0)
+ {
+ NVIC_DisableIRQ(I2C0_IRQn);
+ }
+ else if (I2Cx == LPC_I2C1)
+ {
+ NVIC_DisableIRQ(I2C1_IRQn);
+ }
+ else if (I2Cx == LPC_I2C2)
+ {
+ NVIC_DisableIRQ(I2C2_IRQn);
+ }
+ }
+ return;
+}
+
+
+/*********************************************************************//**
+ * @brief General Master Interrupt handler for I2C peripheral
+ * @param[in] I2Cx I2C peripheral selected, should be:
+ * - LPC_I2C
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return None
+ **********************************************************************/
+void I2C_MasterHandler (LPC_I2C_TypeDef *I2Cx)
+{
+ int32_t tmp;
+ uint8_t returnCode;
+ I2C_M_SETUP_Type *txrx_setup;
+
+ tmp = I2C_getNum(I2Cx);
+ txrx_setup = (I2C_M_SETUP_Type *) i2cdat[tmp].txrx_setup;
+
+ returnCode = (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
+ // Save current status
+ txrx_setup->status = returnCode;
+ // there's no relevant information
+ if (returnCode == I2C_I2STAT_NO_INF){
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ return;
+ }
+
+ /* ----------------------------- TRANSMIT PHASE --------------------------*/
+ if (i2cdat[tmp].dir == 0){
+ switch (returnCode)
+ {
+ /* A start/repeat start condition has been transmitted -------------------*/
+ case I2C_I2STAT_M_TX_START:
+ case I2C_I2STAT_M_TX_RESTART:
+ I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
+ /*
+ * If there's any transmit data, then start to
+ * send SLA+W right now, otherwise check whether if there's
+ * any receive data for next state.
+ */
+ if ((txrx_setup->tx_data != NULL) && (txrx_setup->tx_length != 0)){
+ I2Cx->I2DAT = (txrx_setup->sl_addr7bit << 1);
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ } else {
+ goto next_stage;
+ }
+ break;
+
+ /* SLA+W has been transmitted, ACK has been received ----------------------*/
+ case I2C_I2STAT_M_TX_SLAW_ACK:
+ /* Data has been transmitted, ACK has been received */
+ case I2C_I2STAT_M_TX_DAT_ACK:
+ /* Send more data */
+ if ((txrx_setup->tx_count < txrx_setup->tx_length) \
+ && (txrx_setup->tx_data != NULL)){
+ I2Cx->I2DAT = *(uint8_t *)(txrx_setup->tx_data + txrx_setup->tx_count);
+ txrx_setup->tx_count++;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ }
+ // no more data, switch to next stage
+ else {
+next_stage:
+ // change direction
+ i2cdat[tmp].dir = 1;
+ // Check if any data to receive
+ if ((txrx_setup->rx_length != 0) && (txrx_setup->rx_data != NULL)){
+ // check whether if we need to issue an repeat start
+ if ((txrx_setup->tx_length != 0) && (txrx_setup->tx_data != NULL)){
+ // Send out an repeat start command
+ I2Cx->I2CONSET = I2C_I2CONSET_STA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_AAC | I2C_I2CONCLR_SIC;
+ }
+ // Don't need issue an repeat start, just goto send SLA+R
+ else {
+ goto send_slar;
+ }
+ }
+ // no more data send, the go to end stage now
+ else {
+ // success, goto end stage
+ txrx_setup->status |= I2C_SETUP_STATUS_DONE;
+ goto end_stage;
+ }
+ }
+ break;
+
+ /* SLA+W has been transmitted, NACK has been received ----------------------*/
+ case I2C_I2STAT_M_TX_SLAW_NACK:
+ /* Data has been transmitted, NACK has been received -----------------------*/
+ case I2C_I2STAT_M_TX_DAT_NACK:
+ // update status
+ txrx_setup->status |= I2C_SETUP_STATUS_NOACKF;
+ goto retry;
+ /* Arbitration lost in SLA+R/W or Data bytes -------------------------------*/
+ case I2C_I2STAT_M_TX_ARB_LOST:
+ // update status
+ txrx_setup->status |= I2C_SETUP_STATUS_ARBF;
+ default:
+ goto retry;
+ }
+ }
+
+ /* ----------------------------- RECEIVE PHASE --------------------------*/
+ else if (i2cdat[tmp].dir == 1){
+ switch (returnCode){
+ /* A start/repeat start condition has been transmitted ---------------------*/
+ case I2C_I2STAT_M_RX_START:
+ case I2C_I2STAT_M_RX_RESTART:
+ I2Cx->I2CONCLR = I2C_I2CONCLR_STAC;
+ /*
+ * If there's any receive data, then start to
+ * send SLA+R right now, otherwise check whether if there's
+ * any receive data for end of state.
+ */
+ if ((txrx_setup->rx_data != NULL) && (txrx_setup->rx_length != 0)){
+send_slar:
+ I2Cx->I2DAT = (txrx_setup->sl_addr7bit << 1) | 0x01;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ } else {
+ // Success, goto end stage
+ txrx_setup->status |= I2C_SETUP_STATUS_DONE;
+ goto end_stage;
+ }
+ break;
+
+ /* SLA+R has been transmitted, ACK has been received -----------------*/
+ case I2C_I2STAT_M_RX_SLAR_ACK:
+ if (txrx_setup->rx_count < (txrx_setup->rx_length - 1)) {
+ /*Data will be received, ACK will be return*/
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ }
+ else {
+ /*Last data will be received, NACK will be return*/
+ I2Cx->I2CONCLR = I2C_I2CONSET_AA;
+ }
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Data has been received, ACK has been returned ----------------------*/
+ case I2C_I2STAT_M_RX_DAT_ACK:
+ // Note save data and increase counter first, then check later
+ /* Save data */
+ if ((txrx_setup->rx_data != NULL) && (txrx_setup->rx_count < txrx_setup->rx_length)){
+ *(uint8_t *)(txrx_setup->rx_data + txrx_setup->rx_count) = (I2Cx->I2DAT & I2C_I2DAT_BITMASK);
+ txrx_setup->rx_count++;
+ }
+ if (txrx_setup->rx_count < (txrx_setup->rx_length - 1)) {
+ /*Data will be received, ACK will be return*/
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ }
+ else {
+ /*Last data will be received, NACK will be return*/
+ I2Cx->I2CONCLR = I2C_I2CONSET_AA;
+ }
+
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Data has been received, NACK has been return -------------------------*/
+ case I2C_I2STAT_M_RX_DAT_NACK:
+ /* Save the last data */
+ if ((txrx_setup->rx_data != NULL) && (txrx_setup->rx_count < txrx_setup->rx_length)){
+ *(uint8_t *)(txrx_setup->rx_data + txrx_setup->rx_count) = (I2Cx->I2DAT & I2C_I2DAT_BITMASK);
+ txrx_setup->rx_count++;
+ }
+ // success, go to end stage
+ txrx_setup->status |= I2C_SETUP_STATUS_DONE;
+ goto end_stage;
+
+ /* SLA+R has been transmitted, NACK has been received ------------------*/
+ case I2C_I2STAT_M_RX_SLAR_NACK:
+ // update status
+ txrx_setup->status |= I2C_SETUP_STATUS_NOACKF;
+ goto retry;
+
+ /* Arbitration lost ----------------------------------------------------*/
+ case I2C_I2STAT_M_RX_ARB_LOST:
+ // update status
+ txrx_setup->status |= I2C_SETUP_STATUS_ARBF;
+ default:
+retry:
+ // check if retransmission is available
+ if (txrx_setup->retransmissions_count < txrx_setup->retransmissions_max){
+ // Clear tx count
+ txrx_setup->tx_count = 0;
+ I2Cx->I2CONSET = I2C_I2CONSET_STA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_AAC | I2C_I2CONCLR_SIC;
+ txrx_setup->retransmissions_count++;
+ }
+ // End of stage
+ else {
+end_stage:
+ // Disable interrupt
+ I2C_IntCmd(I2Cx, 0);
+ // Send stop
+ I2C_Stop(I2Cx);
+
+ I2C_MasterComplete[tmp] = TRUE;
+ }
+ break;
+ }
+ }
+}
+
+
+/*********************************************************************//**
+ * @brief General Slave Interrupt handler for I2C peripheral
+ * @param[in] I2Cx I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return None
+ **********************************************************************/
+void I2C_SlaveHandler (LPC_I2C_TypeDef *I2Cx)
+{
+ int32_t tmp;
+ uint8_t returnCode;
+ I2C_S_SETUP_Type *txrx_setup;
+ uint32_t timeout;
+
+ tmp = I2C_getNum(I2Cx);
+ txrx_setup = (I2C_S_SETUP_Type *) i2cdat[tmp].txrx_setup;
+
+ returnCode = (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK);
+ // Save current status
+ txrx_setup->status = returnCode;
+ // there's no relevant information
+ if (returnCode == I2C_I2STAT_NO_INF){
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ return;
+ }
+
+
+ switch (returnCode)
+ {
+
+ /* No status information */
+ case I2C_I2STAT_NO_INF:
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Reading phase -------------------------------------------------------- */
+ /* Own SLA+R has been received, ACK has been returned */
+ case I2C_I2STAT_S_RX_SLAW_ACK:
+ /* General call address has been received, ACK has been returned */
+ case I2C_I2STAT_S_RX_GENCALL_ACK:
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Previously addressed with own SLA;
+ * DATA byte has been received;
+ * ACK has been returned */
+ case I2C_I2STAT_S_RX_PRE_SLA_DAT_ACK:
+ /* DATA has been received, ACK hasn been return */
+ case I2C_I2STAT_S_RX_PRE_GENCALL_DAT_ACK:
+ /*
+ * All data bytes that over-flow the specified receive
+ * data length, just ignore them.
+ */
+ if ((txrx_setup->rx_count < txrx_setup->rx_length) \
+ && (txrx_setup->rx_data != NULL)){
+ *(uint8_t *)(txrx_setup->rx_data + txrx_setup->rx_count) = (uint8_t)I2Cx->I2DAT;
+ txrx_setup->rx_count++;
+ }
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Previously addressed with own SLA;
+ * DATA byte has been received;
+ * NOT ACK has been returned */
+ case I2C_I2STAT_S_RX_PRE_SLA_DAT_NACK:
+ /* DATA has been received, NOT ACK has been returned */
+ case I2C_I2STAT_S_RX_PRE_GENCALL_DAT_NACK:
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /*
+ * Note that: Return code only let us know a stop condition mixed
+ * with a repeat start condition in the same code value.
+ * So we should provide a time-out. In case this is really a stop
+ * condition, this will return back after time out condition. Otherwise,
+ * next session that is slave receive data will be completed.
+ */
+
+ /* A Stop or a repeat start condition */
+ case I2C_I2STAT_S_RX_STA_STO_SLVREC_SLVTRX:
+ // Temporally lock the interrupt for timeout condition
+ I2C_IntCmd(I2Cx, 0);
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ // enable time out
+ timeout = I2C_SLAVE_TIME_OUT;
+ while(1){
+ if (I2Cx->I2CONSET & I2C_I2CONSET_SI){
+ // re-Enable interrupt
+ I2C_IntCmd(I2Cx, 1);
+ break;
+ } else {
+ timeout--;
+ if (timeout == 0){
+ // timeout occur, it's really a stop condition
+ txrx_setup->status |= I2C_SETUP_STATUS_DONE;
+ goto s_int_end;
+ }
+ }
+ }
+ break;
+
+ /* Writing phase -------------------------------------------------------- */
+ /* Own SLA+R has been received, ACK has been returned */
+ case I2C_I2STAT_S_TX_SLAR_ACK:
+ /* Data has been transmitted, ACK has been received */
+ case I2C_I2STAT_S_TX_DAT_ACK:
+ /*
+ * All data bytes that over-flow the specified receive
+ * data length, just ignore them.
+ */
+ if ((txrx_setup->tx_count < txrx_setup->tx_length) \
+ && (txrx_setup->tx_data != NULL)){
+ I2Cx->I2DAT = *(uint8_t *) (txrx_setup->tx_data + txrx_setup->tx_count);
+ txrx_setup->tx_count++;
+ }
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Data has been transmitted, NACK has been received,
+ * that means there's no more data to send, exit now */
+ /*
+ * Note: Don't wait for stop event since in slave transmit mode,
+ * since there no proof lets us know when a stop signal has been received
+ * on slave side.
+ */
+ case I2C_I2STAT_S_TX_DAT_NACK:
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ txrx_setup->status |= I2C_SETUP_STATUS_DONE;
+ goto s_int_end;
+
+ // Other status must be captured
+ default:
+s_int_end:
+ // Disable interrupt
+ I2C_IntCmd(I2Cx, 0);
+ I2Cx->I2CONCLR = I2C_I2CONCLR_AAC | I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC;
+ I2C_SlaveComplete[tmp] = TRUE;
+ break;
+ }
+}
+
+/*********************************************************************//**
+ * @brief Transmit and Receive data in master mode
+ * @param[in] I2Cx I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] TransferCfg Pointer to a I2C_M_SETUP_Type structure that
+ * contains specified information about the
+ * configuration for master transfer.
+ * @param[in] Opt a I2C_TRANSFER_OPT_Type type that selected for
+ * interrupt or polling mode.
+ * @return SUCCESS or ERROR
+ *
+ * Note:
+ * - In case of using I2C to transmit data only, either transmit length set to 0
+ * or transmit data pointer set to NULL.
+ * - In case of using I2C to receive data only, either receive length set to 0
+ * or receive data pointer set to NULL.
+ * - In case of using I2C to transmit followed by receive data, transmit length,
+ * transmit data pointer, receive length and receive data pointer should be set
+ * corresponding.
+ **********************************************************************/
+Status I2C_MasterTransferData(LPC_I2C_TypeDef *I2Cx, I2C_M_SETUP_Type *TransferCfg, \
+ I2C_TRANSFER_OPT_Type Opt)
+{
+ uint8_t *txdat;
+ uint8_t *rxdat;
+ uint32_t CodeStatus;
+ uint8_t tmp;
+
+ // reset all default state
+ txdat = (uint8_t *) TransferCfg->tx_data;
+ rxdat = (uint8_t *) TransferCfg->rx_data;
+ // Reset I2C setup value to default state
+ TransferCfg->tx_count = 0;
+ TransferCfg->rx_count = 0;
+ TransferCfg->status = 0;
+
+ if (Opt == I2C_TRANSFER_POLLING){
+
+ /* First Start condition -------------------------------------------------------------- */
+ TransferCfg->retransmissions_count = 0;
+retry:
+ // reset all default state
+ txdat = (uint8_t *) TransferCfg->tx_data;
+ rxdat = (uint8_t *) TransferCfg->rx_data;
+ // Reset I2C setup value to default state
+ TransferCfg->tx_count = 0;
+ TransferCfg->rx_count = 0;
+ CodeStatus = 0;
+
+ // Start command
+ CodeStatus = I2C_Start(I2Cx);
+ if ((CodeStatus != I2C_I2STAT_M_TX_START) \
+ && (CodeStatus != I2C_I2STAT_M_TX_RESTART)){
+ TransferCfg->retransmissions_count++;
+ if (TransferCfg->retransmissions_count > TransferCfg->retransmissions_max){
+ // save status
+ TransferCfg->status = CodeStatus;
+ goto error;
+ } else {
+ goto retry;
+ }
+ }
+
+ /* In case of sending data first --------------------------------------------------- */
+ if ((TransferCfg->tx_length != 0) && (TransferCfg->tx_data != NULL)){
+
+ /* Send slave address + WR direction bit = 0 ----------------------------------- */
+ CodeStatus = I2C_SendByte(I2Cx, (TransferCfg->sl_addr7bit << 1));
+ if (CodeStatus != I2C_I2STAT_M_TX_SLAW_ACK){
+ TransferCfg->retransmissions_count++;
+ if (TransferCfg->retransmissions_count > TransferCfg->retransmissions_max){
+ // save status
+ TransferCfg->status = CodeStatus | I2C_SETUP_STATUS_NOACKF;
+ goto error;
+ } else {
+ goto retry;
+ }
+ }
+
+ /* Send a number of data bytes ---------------------------------------- */
+ while (TransferCfg->tx_count < TransferCfg->tx_length)
+ {
+ CodeStatus = I2C_SendByte(I2Cx, *txdat);
+ if (CodeStatus != I2C_I2STAT_M_TX_DAT_ACK){
+ TransferCfg->retransmissions_count++;
+ if (TransferCfg->retransmissions_count > TransferCfg->retransmissions_max){
+ // save status
+ TransferCfg->status = CodeStatus | I2C_SETUP_STATUS_NOACKF;
+ goto error;
+ } else {
+ goto retry;
+ }
+ }
+
+ txdat++;
+ TransferCfg->tx_count++;
+ }
+ }
+
+ /* Second Start condition (Repeat Start) ------------------------------------------- */
+ if ((TransferCfg->tx_length != 0) && (TransferCfg->tx_data != NULL) \
+ && (TransferCfg->rx_length != 0) && (TransferCfg->rx_data != NULL)){
+
+ CodeStatus = I2C_Start(I2Cx);
+ if ((CodeStatus != I2C_I2STAT_M_RX_START) \
+ && (CodeStatus != I2C_I2STAT_M_RX_RESTART)){
+ TransferCfg->retransmissions_count++;
+ if (TransferCfg->retransmissions_count > TransferCfg->retransmissions_max){
+ // Update status
+ TransferCfg->status = CodeStatus;
+ goto error;
+ } else {
+ goto retry;
+ }
+ }
+ }
+
+ /* Then, start reading after sending data -------------------------------------- */
+ if ((TransferCfg->rx_length != 0) && (TransferCfg->rx_data != NULL)){
+ /* Send slave address + RD direction bit = 1 ----------------------------------- */
+
+ CodeStatus = I2C_SendByte(I2Cx, ((TransferCfg->sl_addr7bit << 1) | 0x01));
+ if (CodeStatus != I2C_I2STAT_M_RX_SLAR_ACK){
+ TransferCfg->retransmissions_count++;
+ if (TransferCfg->retransmissions_count > TransferCfg->retransmissions_max){
+ // update status
+ TransferCfg->status = CodeStatus | I2C_SETUP_STATUS_NOACKF;
+ goto error;
+ } else {
+ goto retry;
+ }
+ }
+
+ /* Receive a number of data bytes ------------------------------------------------- */
+ while (TransferCfg->rx_count < TransferCfg->rx_length){
+
+ /*
+ * Note that: if data length is only one, the master should not
+ * issue an ACK signal on bus after reading to avoid of next data frame
+ * on slave side
+ */
+ if (TransferCfg->rx_count < (TransferCfg->rx_length - 1)){
+ // Issue an ACK signal for next data frame
+ CodeStatus = I2C_GetByte(I2Cx, &tmp, 1);
+ if (CodeStatus != I2C_I2STAT_M_RX_DAT_ACK){
+ TransferCfg->retransmissions_count++;
+ if (TransferCfg->retransmissions_count > TransferCfg->retransmissions_max){
+ // update status
+ TransferCfg->status = CodeStatus;
+ goto error;
+ } else {
+ goto retry;
+ }
+ }
+ } else {
+ // Do not issue an ACK signal
+ CodeStatus = I2C_GetByte(I2Cx, &tmp, 0);
+ if (CodeStatus != I2C_I2STAT_M_RX_DAT_NACK){
+ TransferCfg->retransmissions_count++;
+ if (TransferCfg->retransmissions_count > TransferCfg->retransmissions_max){
+ // update status
+ TransferCfg->status = CodeStatus;
+ goto error;
+ } else {
+ goto retry;
+ }
+ }
+ }
+ *rxdat++ = tmp;
+ TransferCfg->rx_count++;
+ }
+ }
+
+ /* Send STOP condition ------------------------------------------------- */
+ I2C_Stop(I2Cx);
+ return SUCCESS;
+
+error:
+ // Send stop condition
+ I2C_Stop(I2Cx);
+ return ERROR;
+ }
+
+ else if (Opt == I2C_TRANSFER_INTERRUPT){
+ // Setup tx_rx data, callback and interrupt handler
+ tmp = I2C_getNum(I2Cx);
+ i2cdat[tmp].txrx_setup = (uint32_t) TransferCfg;
+ // Set direction phase, write first
+ i2cdat[tmp].dir = 0;
+
+ /* First Start condition -------------------------------------------------------------- */
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ I2Cx->I2CONSET = I2C_I2CONSET_STA;
+ I2C_IntCmd(I2Cx, 1);
+
+ return (SUCCESS);
+ }
+
+ return ERROR;
+}
+
+/*********************************************************************//**
+ * @brief Receive and Transmit data in slave mode
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] TransferCfg Pointer to a I2C_S_SETUP_Type structure that
+ * contains specified information about the
+ * configuration for master transfer.
+ * @param[in] Opt I2C_TRANSFER_OPT_Type type that selected for
+ * interrupt or polling mode.
+ * @return SUCCESS or ERROR
+ *
+ * Note:
+ * The mode of slave's operation depends on the command sent from master on
+ * the I2C bus. If the master send a SLA+W command, this sub-routine will
+ * use receive data length and receive data pointer. If the master send a SLA+R
+ * command, this sub-routine will use transmit data length and transmit data
+ * pointer.
+ * If the master issue an repeat start command or a stop command, the slave will
+ * enable an time out condition, during time out condition, if there's no activity
+ * on I2C bus, the slave will exit, otherwise (i.e. the master send a SLA+R/W),
+ * the slave then switch to relevant operation mode. The time out should be used
+ * because the return status code can not show difference from stop and repeat
+ * start command in slave operation.
+ * In case of the expected data length from master is greater than data length
+ * that slave can support:
+ * - In case of reading operation (from master): slave will return I2C_I2DAT_IDLE_CHAR
+ * value.
+ * - In case of writing operation (from master): slave will ignore remain data from master.
+ **********************************************************************/
+Status I2C_SlaveTransferData(LPC_I2C_TypeDef *I2Cx, I2C_S_SETUP_Type *TransferCfg, \
+ I2C_TRANSFER_OPT_Type Opt)
+{
+ uint8_t *txdat;
+ uint8_t *rxdat;
+ uint32_t CodeStatus;
+ uint32_t timeout;
+ int32_t time_en;
+ int32_t tmp;
+
+ // reset all default state
+ txdat = (uint8_t *) TransferCfg->tx_data;
+ rxdat = (uint8_t *) TransferCfg->rx_data;
+ // Reset I2C setup value to default state
+ TransferCfg->tx_count = 0;
+ TransferCfg->rx_count = 0;
+ TransferCfg->status = 0;
+
+
+ // Polling option
+ if (Opt == I2C_TRANSFER_POLLING){
+
+ /* Set AA bit to ACK command on I2C bus */
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ /* Clear SI bit to be ready ... */
+ I2Cx->I2CONCLR = (I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC);
+
+ time_en = 0;
+ timeout = 0;
+
+ while (1)
+ {
+ /* Check SI flag ready */
+ if (I2Cx->I2CONSET & I2C_I2CONSET_SI)
+ {
+ time_en = 0;
+
+ switch (CodeStatus = (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK))
+ {
+
+ /* No status information */
+ case I2C_I2STAT_NO_INF:
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Reading phase -------------------------------------------------------- */
+ /* Own SLA+R has been received, ACK has been returned */
+ case I2C_I2STAT_S_RX_SLAW_ACK:
+ /* General call address has been received, ACK has been returned */
+ case I2C_I2STAT_S_RX_GENCALL_ACK:
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Previously addressed with own SLA;
+ * DATA byte has been received;
+ * ACK has been returned */
+ case I2C_I2STAT_S_RX_PRE_SLA_DAT_ACK:
+ /* DATA has been received, ACK hasn been return */
+ case I2C_I2STAT_S_RX_PRE_GENCALL_DAT_ACK:
+ /*
+ * All data bytes that over-flow the specified receive
+ * data length, just ignore them.
+ */
+ if ((TransferCfg->rx_count < TransferCfg->rx_length) \
+ && (TransferCfg->rx_data != NULL)){
+ *rxdat++ = (uint8_t)I2Cx->I2DAT;
+ TransferCfg->rx_count++;
+ }
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Previously addressed with own SLA;
+ * DATA byte has been received;
+ * NOT ACK has been returned */
+ case I2C_I2STAT_S_RX_PRE_SLA_DAT_NACK:
+ /* DATA has been received, NOT ACK has been returned */
+ case I2C_I2STAT_S_RX_PRE_GENCALL_DAT_NACK:
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /*
+ * Note that: Return code only let us know a stop condition mixed
+ * with a repeat start condition in the same code value.
+ * So we should provide a time-out. In case this is really a stop
+ * condition, this will return back after time out condition. Otherwise,
+ * next session that is slave receive data will be completed.
+ */
+
+ /* A Stop or a repeat start condition */
+ case I2C_I2STAT_S_RX_STA_STO_SLVREC_SLVTRX:
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ // enable time out
+ time_en = 1;
+ timeout = 0;
+ break;
+
+ /* Writing phase -------------------------------------------------------- */
+ /* Own SLA+R has been received, ACK has been returned */
+ case I2C_I2STAT_S_TX_SLAR_ACK:
+ /* Data has been transmitted, ACK has been received */
+ case I2C_I2STAT_S_TX_DAT_ACK:
+ /*
+ * All data bytes that over-flow the specified receive
+ * data length, just ignore them.
+ */
+ if ((TransferCfg->tx_count < TransferCfg->tx_length) \
+ && (TransferCfg->tx_data != NULL)){
+ I2Cx->I2DAT = *txdat++;
+ TransferCfg->tx_count++;
+ }
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ break;
+
+ /* Data has been transmitted, NACK has been received,
+ * that means there's no more data to send, exit now */
+ /*
+ * Note: Don't wait for stop event since in slave transmit mode,
+ * since there no proof lets us know when a stop signal has been received
+ * on slave side.
+ */
+ case I2C_I2STAT_S_TX_DAT_NACK:
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ // enable time out
+ time_en = 1;
+ timeout = 0;
+ break;
+
+ // Other status must be captured
+ default:
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+ goto s_error;
+ }
+ } else if (time_en){
+ if (timeout++ > I2C_SLAVE_TIME_OUT){
+ // it's really a stop condition, goto end stage
+ goto s_end_stage;
+ }
+ }
+ }
+
+s_end_stage:
+ /* Clear AA bit to disable ACK on I2C bus */
+ I2Cx->I2CONCLR = I2C_I2CONCLR_AAC;
+ // Check if there's no error during operation
+ // Update status
+ TransferCfg->status = CodeStatus | I2C_SETUP_STATUS_DONE;
+ return SUCCESS;
+
+s_error:
+ /* Clear AA bit to disable ACK on I2C bus */
+ I2Cx->I2CONCLR = I2C_I2CONCLR_AAC;
+ // Update status
+ TransferCfg->status = CodeStatus;
+ return ERROR;
+ }
+
+ else if (Opt == I2C_TRANSFER_INTERRUPT){
+ // Setup tx_rx data, callback and interrupt handler
+ tmp = I2C_getNum(I2Cx);
+ i2cdat[tmp].txrx_setup = (uint32_t) TransferCfg;
+ // Set direction phase, read first
+ i2cdat[tmp].dir = 1;
+
+ // Enable AA
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC;
+ I2C_IntCmd(I2Cx, 1);
+
+ return (SUCCESS);
+ }
+
+ return ERROR;
+}
+
+/*********************************************************************//**
+ * @brief Set Own slave address in I2C peripheral corresponding to
+ * parameter specified in OwnSlaveAddrConfigStruct.
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] OwnSlaveAddrConfigStruct Pointer to a I2C_OWNSLAVEADDR_CFG_Type
+ * structure that contains the configuration information for the
+* specified I2C slave address.
+ * @return None
+ **********************************************************************/
+void I2C_SetOwnSlaveAddr(LPC_I2C_TypeDef *I2Cx, I2C_OWNSLAVEADDR_CFG_Type *OwnSlaveAddrConfigStruct)
+{
+ uint32_t tmp;
+ CHECK_PARAM(PARAM_I2Cx(I2Cx));
+ CHECK_PARAM(PARAM_I2C_SLAVEADDR_CH(OwnSlaveAddrConfigStruct->SlaveAddrChannel));
+ CHECK_PARAM(PARAM_FUNCTIONALSTATE(OwnSlaveAddrConfigStruct->GeneralCallState));
+
+ tmp = (((uint32_t)(OwnSlaveAddrConfigStruct->SlaveAddr_7bit << 1)) \
+ | ((OwnSlaveAddrConfigStruct->GeneralCallState == ENABLE) ? 0x01 : 0x00))& I2C_I2ADR_BITMASK;
+ switch (OwnSlaveAddrConfigStruct->SlaveAddrChannel)
+ {
+ case 0:
+ I2Cx->I2ADR0 = tmp;
+ I2Cx->I2MASK0 = I2C_I2MASK_MASK((uint32_t) \
+ (OwnSlaveAddrConfigStruct->SlaveAddrMaskValue));
+ break;
+ case 1:
+ I2Cx->I2ADR1 = tmp;
+ I2Cx->I2MASK1 = I2C_I2MASK_MASK((uint32_t) \
+ (OwnSlaveAddrConfigStruct->SlaveAddrMaskValue));
+ break;
+ case 2:
+ I2Cx->I2ADR2 = tmp;
+ I2Cx->I2MASK2 = I2C_I2MASK_MASK((uint32_t) \
+ (OwnSlaveAddrConfigStruct->SlaveAddrMaskValue));
+ break;
+ case 3:
+ I2Cx->I2ADR3 = tmp;
+ I2Cx->I2MASK3 = I2C_I2MASK_MASK((uint32_t) \
+ (OwnSlaveAddrConfigStruct->SlaveAddrMaskValue));
+ break;
+ }
+}
+
+
+/*********************************************************************//**
+ * @brief Configures functionality in I2C monitor mode
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] MonitorCfgType Monitor Configuration type, should be:
+ * - I2C_MONITOR_CFG_SCL_OUTPUT: I2C module can 'stretch'
+ * the clock line (hold it low) until it has had time to
+ * respond to an I2C interrupt.
+ * - I2C_MONITOR_CFG_MATCHALL: When this bit is set to '1'
+ * and the I2C is in monitor mode, an interrupt will be
+ * generated on ANY address received.
+ * @param[in] NewState New State of this function, should be:
+ * - ENABLE: Enable this function.
+ * - DISABLE: Disable this function.
+ * @return None
+ **********************************************************************/
+void I2C_MonitorModeConfig(LPC_I2C_TypeDef *I2Cx, uint32_t MonitorCfgType, FunctionalState NewState)
+{
+ CHECK_PARAM(PARAM_I2Cx(I2Cx));
+ CHECK_PARAM(PARAM_I2C_MONITOR_CFG(MonitorCfgType));
+ CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
+
+ if (NewState == ENABLE)
+ {
+ I2Cx->MMCTRL |= MonitorCfgType;
+ }
+ else
+ {
+ I2Cx->MMCTRL &= (~MonitorCfgType) & I2C_I2MMCTRL_BITMASK;
+ }
+}
+
+
+/*********************************************************************//**
+ * @brief Enable/Disable I2C monitor mode
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @param[in] NewState New State of this function, should be:
+ * - ENABLE: Enable monitor mode.
+ * - DISABLE: Disable monitor mode.
+ * @return None
+ **********************************************************************/
+void I2C_MonitorModeCmd(LPC_I2C_TypeDef *I2Cx, FunctionalState NewState)
+{
+ CHECK_PARAM(PARAM_I2Cx(I2Cx));
+ CHECK_PARAM(PARAM_FUNCTIONALSTATE(NewState));
+
+ if (NewState == ENABLE)
+ {
+ I2Cx->MMCTRL |= I2C_I2MMCTRL_MM_ENA;
+ I2Cx->I2CONSET = I2C_I2CONSET_AA;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC;
+ }
+ else
+ {
+ I2Cx->MMCTRL &= (~I2C_I2MMCTRL_MM_ENA) & I2C_I2MMCTRL_BITMASK;
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC | I2C_I2CONCLR_STAC | I2C_I2CONCLR_AAC;
+ }
+ I2C_MonitorBufferIndex = 0;
+}
+
+
+/*********************************************************************//**
+ * @brief Get data from I2C data buffer in monitor mode.
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return None
+ * Note: In monitor mode, the I2C module may lose the ability to stretch
+ * the clock (stall the bus) if the ENA_SCL bit is not set. This means that
+ * the processor will have a limited amount of time to read the contents of
+ * the data received on the bus. If the processor reads the I2DAT shift
+ * register, as it ordinarily would, it could have only one bit-time to
+ * respond to the interrupt before the received data is overwritten by
+ * new data.
+ **********************************************************************/
+uint8_t I2C_MonitorGetDatabuffer(LPC_I2C_TypeDef *I2Cx)
+{
+ CHECK_PARAM(PARAM_I2Cx(I2Cx));
+ return ((uint8_t)(I2Cx->I2DATA_BUFFER));
+}
+
+/*********************************************************************//**
+ * @brief Get data from I2C data buffer in monitor mode.
+ * @param[in] I2Cx I2C peripheral selected, should be
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return None
+ * Note: In monitor mode, the I2C module may lose the ability to stretch
+ * the clock (stall the bus) if the ENA_SCL bit is not set. This means that
+ * the processor will have a limited amount of time to read the contents of
+ * the data received on the bus. If the processor reads the I2DAT shift
+ * register, as it ordinarily would, it could have only one bit-time to
+ * respond to the interrupt before the received data is overwritten by
+ * new data.
+ **********************************************************************/
+BOOL_8 I2C_MonitorHandler(LPC_I2C_TypeDef *I2Cx, uint8_t *buffer, uint32_t size)
+{
+ BOOL_8 ret=FALSE;
+
+ I2Cx->I2CONCLR = I2C_I2CONCLR_SIC;
+
+ buffer[I2C_MonitorBufferIndex] = (uint8_t)(I2Cx->I2DATA_BUFFER);
+ I2C_MonitorBufferIndex++;
+ if(I2C_MonitorBufferIndex >= size)
+ {
+ ret = TRUE;
+ }
+ return ret;
+}
+/*********************************************************************//**
+ * @brief Get status of Master Transfer
+ * @param[in] I2Cx I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return Master transfer status, could be:
+ * - TRUE master transfer completed
+ * - FALSE master transfer have not completed yet
+ **********************************************************************/
+uint32_t I2C_MasterTransferComplete(LPC_I2C_TypeDef *I2Cx)
+{
+ uint32_t retval, tmp;
+ tmp = I2C_getNum(I2Cx);
+ retval = I2C_MasterComplete[tmp];
+ I2C_MasterComplete[tmp] = FALSE;
+ return retval;
+}
+
+/*********************************************************************//**
+ * @brief Get status of Slave Transfer
+ * @param[in] I2Cx I2C peripheral selected, should be:
+ * - LPC_I2C0
+ * - LPC_I2C1
+ * - LPC_I2C2
+ * @return Complete status, could be: TRUE/FALSE
+ **********************************************************************/
+uint32_t I2C_SlaveTransferComplete(LPC_I2C_TypeDef *I2Cx)
+{
+ uint32_t retval, tmp;
+ tmp = I2C_getNum(I2Cx);
+ retval = I2C_SlaveComplete[tmp];
+ I2C_SlaveComplete[tmp] = FALSE;
+ return retval;
+}
+
+
+
+/**
+ * @}
+ */
+
+#endif /* _I2C */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */
|