Premier jetstart

1 files changed, 1231 insertions, 0 deletions

diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..62bf46d
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1231 @@
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+
+# serial 29 AM_PROG_LIBTOOL
+AC_DEFUN(AM_PROG_LIBTOOL,
+[AC_REQUIRE([AM_ENABLE_SHARED])dnl
+AC_REQUIRE([AM_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_RANLIB])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AM_PROG_LD])dnl
+AC_REQUIRE([AM_PROG_NM])dnl
+AC_REQUIRE([AM_SYS_NM_PARSE])dnl
+AC_REQUIRE([AM_SYS_SYMBOL_UNDERSCORE])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+dnl
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags=
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$silent" = yes && libtool_flags="$libtool_flags --silent"
+test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case "$host" in
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case "`/usr/bin/file conftest.o`" in
+    *32-bit*)
+      LD="${LD-ld} -32"
+      ;;
+    *N32*)
+      LD="${LD-ld} -n32"
+      ;;
+    *64-bit*)
+      LD="${LD-ld} -64"
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+
+*-*-cygwin32*)
+  AM_SYS_LIBTOOL_CYGWIN32
+  ;;
+
+esac
+
+# enable the --disable-libtool-lock switch
+
+AC_ARG_ENABLE(libtool-lock,
+[  --disable-libtool-lock  force libtool not to do file locking],
+need_locks=$enableval,
+need_locks=yes)
+
+if test x"$need_locks" = xno; then
+  libtool_flags="$libtool_flags --disable-lock"
+fi
+
+
+# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
+DLLTOOL="$DLLTOOL" AS="$AS" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+|| AC_MSG_ERROR([libtool configure failed])
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+])
+
+# AM_ENABLE_SHARED - implement the --enable-shared flag
+# Usage: AM_ENABLE_SHARED[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AM_ENABLE_SHARED,
+[define([AM_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(shared,
+changequote(<<, >>)dnl
+<<  --enable-shared[=PKGS]  build shared libraries [default=>>AM_ENABLE_SHARED_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_shared=AM_ENABLE_SHARED_DEFAULT)dnl
+])
+
+# AM_DISABLE_SHARED - set the default shared flag to --disable-shared
+AC_DEFUN(AM_DISABLE_SHARED,
+[AM_ENABLE_SHARED(no)])
+
+# AM_DISABLE_STATIC - set the default static flag to --disable-static
+AC_DEFUN(AM_DISABLE_STATIC,
+[AM_ENABLE_STATIC(no)])
+
+# AM_ENABLE_STATIC - implement the --enable-static flag
+# Usage: AM_ENABLE_STATIC[(DEFAULT)]
+#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+#   `yes'.
+AC_DEFUN(AM_ENABLE_STATIC,
+[define([AM_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE(static,
+changequote(<<, >>)dnl
+<<  --enable-static[=PKGS]  build static libraries [default=>>AM_ENABLE_STATIC_DEFAULT],
+changequote([, ])dnl
+[p=${PACKAGE-default}
+case "$enableval" in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+  enable_static=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_static=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac],
+enable_static=AM_ENABLE_STATIC_DEFAULT)dnl
+])
+
+
+# AM_PROG_LD - find the path to the GNU or non-GNU linker
+AC_DEFUN(AM_PROG_LD,
+[AC_ARG_WITH(gnu-ld,
+[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$ac_cv_prog_gcc" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by GCC])
+  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+  case "$ac_prog" in
+    # Accept absolute paths.
+changequote(,)dnl
+    /* | [A-Za-z]:/*)
+      # Canonicalize the path of ld
+      re_direlt='/[^/][^/]*/\.\./'
+      sub_uncdrive='s%^\([A-Za-z]\):/%//\1/%'
+changequote([,])dnl
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+      done
+      case "$host_os" in
+      cygwin*)
+        # Convert to a UNC path for cygwin
+        test -z "$LD" && LD=`echo X$ac_prog | $Xsed -e "$sub_uncdrive"`
+	;;
+      *)
+        test -z "$LD" && LD="$ac_prog"
+	;;
+      esac
+      ;;
+    ##
+    ## FIXME:  The code fails later on if we try to use an $LD with
+    ##         '\\' path separators.
+    ##
+changequote(,)dnl
+    [A-Za-z]:[\\]*)
+      # Canonicalize the path of ld
+      re_direlt='\\[^\\][^\\]*\\\.\.\(\\\)'
+      sub_uncdrive='s%^\([A-Za-z]\):\\%//\1/%'
+changequote([,])dnl
+      sub_uncdir='s%\\%/%g'
+      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+        ac_prog=`echo $ac_prog| sed "s%$re_direlt%\1%"`
+      done
+      case "$host_os" in
+      cygwin*)
+        # Convert to a UNC path for cygwin
+        test -z "$LD" && LD=`echo X$ac_prog | sed -e 's%^X%%' -e "$sub_uncdrive" -e "$sub_uncdir"`
+	;;
+      *)
+        test -z "$LD" && LD="$ac_prog"
+	;;
+      esac
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(ac_cv_path_LD,
+[if test -z "$LD"; then
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in $PATH; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog"; then
+      ac_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some GNU ld's only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+	test "$with_gnu_ld" != no && break
+      else
+        test "$with_gnu_ld" != yes && break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+else
+  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$ac_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_SUBST(LD)
+AM_PROG_LD_GNU
+])
+
+AC_DEFUN(AM_PROG_LD_GNU,
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+  ac_cv_prog_gnu_ld=yes
+else
+  ac_cv_prog_gnu_ld=no
+fi])
+])
+
+# AM_PROG_NM - find the path to a BSD-compatible name lister
+AC_DEFUN(AM_PROG_NM,
+[AC_MSG_CHECKING([for BSD-compatible nm])
+AC_CACHE_VAL(ac_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  ac_cv_path_NM="$NM"
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/nm; then
+      # Check to see if the nm accepts a BSD-compat flag.
+      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+      #   nm: unknown option "B" ignored
+      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+        ac_cv_path_NM="$ac_dir/nm -B"
+      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+        ac_cv_path_NM="$ac_dir/nm -p"
+      else
+        ac_cv_path_NM="$ac_dir/nm"
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+fi])
+NM="$ac_cv_path_NM"
+AC_MSG_RESULT([$NM])
+AC_SUBST(NM)
+])
+
+# AM_SYS_NM_PARSE - Check for command ro grab the raw symbol name followed
+# by C symbol name from nm.
+AC_DEFUN(AM_SYS_NM_PARSE,
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AM_PROG_NM])dnl
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output])
+AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
+[# These are sane defaults that work on at least a few old systems.
+# {They come from Ultrix.  What could be older than Ultrix?!! ;)}
+
+changequote(,)dnl
+# Character class describing NM global symbol codes.
+ac_symcode='[BCDEGRSTU]'
+
+# Regexp to match symbols that can be accessed directly from C.
+ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform the above into a raw symbol and a C symbol.
+ac_symxfrm='\1 \1'
+
+# Define system-specific variables.
+case "$host_os" in
+aix*)
+  ac_symcode='[BCDTU]'
+  ;;
+sunos* | cygwin32* | mingw32*)
+  ac_sympat='_\([_A-Za-z][_A-Za-z0-9]*\)'
+  ac_symxfrm='_\1 \1'
+  ;;
+irix*)
+  # Cannot use undefined symbols on IRIX because inlined functions mess us up.
+  ac_symcode='[BCDEGRST]'
+  ;;
+solaris*)
+  ac_symcode='[BDTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+  ac_symcode='[ABCDGISTUW]'
+fi
+
+case "$host_os" in
+cygwin32* | mingw32*)
+  # We do not want undefined symbols on cygwin32.  The user must
+  # arrange to define them via -l arguments.
+  ac_symcode='[ABCDGISTW]'
+  ;;
+esac
+changequote([,])dnl
+
+# Write the raw and C identifiers.
+ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.* $ac_symcode $ac_sympat$/$ac_symxfrm/p'"
+
+# Check to see that the pipe works correctly.
+ac_pipe_works=no
+cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func;return 0;}
+EOF
+if AC_TRY_EVAL(ac_compile); then
+  # Now try to grab the symbols.
+  ac_nlist=conftest.nm
+  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
+
+    # Try sorting and uniquifying the output.
+    if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
+      mv -f "$ac_nlist"T "$ac_nlist"
+      ac_wcout=`wc "$ac_nlist" 2>/dev/null`
+changequote(,)dnl
+      ac_count=`echo "X$ac_wcout" | sed -e 's,^X,,' -e 's/^[ 	]*\([0-9][0-9]*\).*$/\1/'`
+changequote([,])dnl
+      (test "$ac_count" -ge 0) 2>/dev/null || ac_count=-1
+    else
+      rm -f "$ac_nlist"T
+      ac_count=-1
+    fi
+
+    # Make sure that we snagged all the symbols we need.
+    if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
+      if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
+	cat <<EOF > conftest.c
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+        # Now generate the symbol file.
+        sed 's/^.* \(.*\)$/extern char \1;/' < "$ac_nlist" >> conftest.c
+
+	cat <<EOF >> conftest.c
+#if defined (__STDC__) && __STDC__
+# define __ptr_t void *
+#else
+# define __ptr_t char *
+#endif
+
+/* The number of symbols in dld_preloaded_symbols, -1 if unsorted. */
+int dld_preloaded_symbol_count = $ac_count;
+
+/* The mapping between symbol names and symbols. */
+struct {
+  char *name;
+  __ptr_t address;
+}
+changequote(,)dnl
+dld_preloaded_symbols[] =
+changequote([,])dnl
+{
+EOF
+        sed 's/^\(.*\) \(.*\)$/  {"\1", (__ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
+        cat <<\EOF >> conftest.c
+  {0, (__ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+        # Now try linking the two files.
+        mv conftest.$ac_objext conftestm.$ac_objext
+	ac_save_LIBS="$LIBS"
+	ac_save_CFLAGS="$CFLAGS"
+        LIBS="conftestm.$ac_objext"
+	CFLAGS="$CFLAGS$no_builtin_flag"
+        if AC_TRY_EVAL(ac_link) && test -s conftest; then
+          ac_pipe_works=yes
+        else
+          echo "configure: failed program was:" >&AC_FD_CC
+          cat conftest.c >&AC_FD_CC
+        fi
+        LIBS="$ac_save_LIBS"
+	CFLAGS="$ac_save_CFLAGS"
+      else
+        echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
+      fi
+    else
+      echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
+    fi
+  else
+    echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
+  fi
+else
+  echo "$progname: failed program was:" >&AC_FD_CC
+  cat conftest.c >&AC_FD_CC
+fi
+rm -rf conftest*
+
+# Do not use the global_symbol_pipe unless it works.
+test "$ac_pipe_works" = yes || ac_cv_sys_global_symbol_pipe=
+])
+
+ac_result=yes
+if test -z "$ac_cv_sys_global_symbol_pipe"; then
+   ac_result=no
+fi
+AC_MSG_RESULT($ac_result)
+])
+
+# AM_SYS_LIBTOOL_CYGWIN32 - find tools needed on cygwin32
+AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN32,
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+AC_CHECK_TOOL(AS, as, false)
+])
+
+# AM_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
+#                            with an underscore?
+AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE,
+[AC_REQUIRE([AM_PROG_NM])dnl
+AC_REQUIRE([AM_SYS_NM_PARSE])dnl
+AC_MSG_CHECKING([for _ prefix in compiled symbols])
+AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
+[ac_cv_sys_symbol_underscore=no
+cat > conftest.$ac_ext <<EOF
+void nm_test_func(){}
+int main(){nm_test_func;return 0;}
+EOF
+if AC_TRY_EVAL(ac_compile); then
+  # Now try to grab the symbols.
+  ac_nlist=conftest.nm
+  if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
+    # See whether the symbols have a leading underscore.
+    if egrep '^_nm_test_func' "$ac_nlist" >/dev/null; then
+      ac_cv_sys_symbol_underscore=yes
+    else
+      if egrep '^nm_test_func ' "$ac_nlist" >/dev/null; then
+        :
+      else
+        echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
+      fi
+    fi
+  else
+    echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
+  fi
+else
+  echo "configure: failed program was:" >&AC_FD_CC
+  cat conftest.c >&AC_FD_CC
+fi
+rm -rf conftest*
+])
+AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
+if test x$ac_cv_sys_symbol_underscore = xyes; then
+  AC_DEFINE(WITH_SYMBOL_UNDERSCORE,1,
+  [define if compiled symbols have a leading underscore])
+fi
+])
+# Configure paths for AUDIOFILE
+# Bertrand Guiheneuf 98-10-21
+# stolen from esd.m4 in esound :
+# Manish Singh    98-9-30
+# stolen back from Frank Belew
+# stolen from Manish Singh
+# Shamelessly stolen from Owen Taylor
+
+dnl AM_PATH_AUDIOFILE([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+dnl Test for AUDIOFILE, and define AUDIOFILE_CFLAGS and AUDIOFILE_LIBS
+dnl
+AC_DEFUN(AM_PATH_AUDIOFILE,
+[dnl 
+dnl Get the cflags and libraries from the audiofile-config script
+dnl
+AC_ARG_WITH(audiofile-prefix,[  --with-audiofile-prefix=PFX   Prefix where AUDIOFILE is installed (optional)],
+            audiofile_prefix="$withval", audiofile_prefix="")
+AC_ARG_WITH(audiofile-exec-prefix,[  --with-audiofile-exec-prefix=PFX Exec prefix where AUDIOFILE is installed (optional)],
+            audiofile_exec_prefix="$withval", audiofile_exec_prefix="")
+AC_ARG_ENABLE(audiofiletest, [  --disable-audiofiletest       Do not try to compile and run a test AUDIOFILE program],
+		    , enable_audiofiletest=yes)
+
+  if test x$audiofile_exec_prefix != x ; then
+     audiofile_args="$audiofile_args --exec-prefix=$audiofile_exec_prefix"
+     if test x${AUDIOFILE_CONFIG+set} != xset ; then
+        AUDIOFILE_CONFIG=$audiofile_exec_prefix/bin/audiofile-config
+     fi
+  fi
+  if test x$audiofile_prefix != x ; then
+     audiofile_args="$audiofile_args --prefix=$audiofile_prefix"
+     if test x${AUDIOFILE_CONFIG+set} != xset ; then
+        AUDIOFILE_CONFIG=$audiofile_prefix/bin/audiofile-config
+     fi
+  fi
+
+  AC_PATH_PROG(AUDIOFILE_CONFIG, audiofile-config, no)
+  min_audiofile_version=ifelse([$1], ,0.2.5,$1)
+  AC_MSG_CHECKING(for AUDIOFILE - version >= $min_audiofile_version)
+  no_audiofile=""
+  if test "$AUDIOFILE_CONFIG" = "no" ; then
+    no_audiofile=yes
+  else
+    AUDIOFILE_LIBS=`$AUDIOFILE_CONFIG $audiofileconf_args --libs`
+    AUDIOFILE_CFLAGS=`$AUDIOFILE_CONFIG $audiofileconf_args --cflags`
+    audiofile_major_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+    audiofile_minor_version=`$AUDIOFILE_CONFIG $audiofile_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+    audiofile_micro_version=`$AUDIOFILE_CONFIG $audiofile_config_args --version | \
+           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+    if test "x$enable_audiofiletest" = "xyes" ; then
+      ac_save_CFLAGS="$CFLAGS"
+      ac_save_LIBS="$LIBS"
+      CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
+      LIBS="$LIBS $AUDIOFILE_LIBS"
+dnl
+dnl Now check if the installed AUDIOFILE is sufficiently new. (Also sanity
+dnl checks the results of audiofile-config to some extent
+dnl
+      rm -f conf.audiofiletest
+      AC_TRY_RUN([
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <audiofile.h>
+
+char*
+my_strdup (char *str)
+{
+  char *new_str;
+  
+  if (str)
+    {
+      new_str = malloc ((strlen (str) + 1) * sizeof(char));
+      strcpy (new_str, str);
+    }
+  else
+    new_str = NULL;
+  
+  return new_str;
+}
+
+int main ()
+{
+  int major, minor, micro;
+  char *tmp_version;
+
+  system ("touch conf.audiofiletest");
+
+  /* HP/UX 9 (%@#!) writes to sscanf strings */
+  tmp_version = my_strdup("$min_audiofile_version");
+  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+     printf("%s, bad version string\n", "$min_audiofile_version");
+     exit(1);
+   }
+
+   if (($audiofile_major_version > major) ||
+      (($audiofile_major_version == major) && ($audiofile_minor_version > minor)) ||
+      (($audiofile_major_version == major) && ($audiofile_minor_version == minor) && ($audiofile_micro_version >= micro)))
+    {
+      return 0;
+    }
+  else
+    {
+      printf("\n*** 'audiofile-config --version' returned %d.%d.%d, but the minimum version\n", $audiofile_major_version, $audiofile_minor_version, $audiofile_micro_version);
+      printf("*** of AUDIOFILE required is %d.%d.%d. If audiofile-config is correct, then it is\n", major, minor, micro);
+      printf("*** best to upgrade to the required version.\n");
+      printf("*** If audiofile-config was wrong, set the environment variable AUDIOFILE_CONFIG\n");
+      printf("*** to point to the correct copy of audiofile-config, and remove the file\n");
+      printf("*** config.cache before re-running configure\n");
+      return 1;
+    }
+}
+
+],, no_audiofile=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+       CFLAGS="$ac_save_CFLAGS"
+       LIBS="$ac_save_LIBS"
+     fi
+  fi
+  if test "x$no_audiofile" = x ; then
+     AC_MSG_RESULT(yes)
+     ifelse([$2], , :, [$2])     
+  else
+     AC_MSG_RESULT(no)
+     if test "$AUDIOFILE_CONFIG" = "no" ; then
+       echo "*** The audiofile-config script installed by AUDIOFILE could not be found"
+       echo "*** If AUDIOFILE was installed in PREFIX, make sure PREFIX/bin is in"
+       echo "*** your path, or set the AUDIOFILE_CONFIG environment variable to the"
+       echo "*** full path to audiofile-config."
+     else
+       if test -f conf.audiofiletest ; then
+        :
+       else
+          echo "*** Could not run AUDIOFILE test program, checking why..."
+          CFLAGS="$CFLAGS $AUDIOFILE_CFLAGS"
+          LIBS="$LIBS $AUDIOFILE_LIBS"
+          AC_TRY_LINK([
+#include <stdio.h>
+#include <audiofile.h>
+],      [ return 0; ],
+        [ echo "*** The test program compiled, but did not run. This usually means"
+          echo "*** that the run-time linker is not finding AUDIOFILE or finding the wrong"
+          echo "*** version of AUDIOFILE. If it is not finding AUDIOFILE, you'll need to set your"
+          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+          echo "*** is required on your system"
+	  echo "***"
+          echo "*** If you have an old version installed, it is best to remove it, although"
+          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+          echo "*** exact error that occured. This usually means AUDIOFILE was incorrectly installed"
+          echo "*** or that you have moved AUDIOFILE since it was installed. In the latter case, you"
+          echo "*** may want to edit the audiofile-config script: $AUDIOFILE_CONFIG" ])
+          CFLAGS="$ac_save_CFLAGS"
+          LIBS="$ac_save_LIBS"
+       fi
+     fi
+     AUDIOFILE_CFLAGS=""
+     AUDIOFILE_LIBS=""
+     ifelse([$3], , :, [$3])
+  fi
+  AC_SUBST(AUDIOFILE_CFLAGS)
+  AC_SUBST(AUDIOFILE_LIBS)
+  rm -f conf.audiofiletest
+])
+
+# Do all the work for Automake.  This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+   if test "[$]*" = "X"; then
+      # -L didn't work.
+      set X `ls -t $srcdir/configure conftestfile`
+   fi
+   if test "[$]*" != "X $srcdir/configure conftestfile" \
+      && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "[$]2" = conftestfile
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf.  Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+   $1=$2
+   AC_MSG_RESULT(found)
+else
+   $1="$3/missing $2"
+   AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Like AC_CONFIG_HEADER, but automatically create stamp file.
+
+AC_DEFUN(AM_CONFIG_HEADER,
+[AC_PREREQ([2.12])
+AC_CONFIG_HEADER([$1])
+dnl When config.status generates a header, we must update the stamp-h file.
+dnl This file resides in the same directory as the config header
+dnl that is generated.  We must strip everything past the first ":",
+dnl and everything past the last "/".
+AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
+ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
+<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
+<<am_indx=1
+for am_file in <<$1>>; do
+  case " <<$>>CONFIG_HEADERS " in
+  *" <<$>>am_file "*<<)>>
+    echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+    ;;
+  esac
+  am_indx=`expr "<<$>>am_indx" + 1`
+done<<>>dnl>>)
+changequote([,]))])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN(AM_MAINTAINER_MODE,
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+  dnl maintainer-mode is disabled by default
+  AC_ARG_ENABLE(maintainer-mode,
+[  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer],
+      USE_MAINTAINER_MODE=$enableval,
+      USE_MAINTAINER_MODE=no)
+  AC_MSG_RESULT($USE_MAINTAINER_MODE)
+  AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+  MAINT=$MAINTAINER_MODE_TRUE
+  AC_SUBST(MAINT)dnl
+]
+)
+
+# Define a conditional.
+
+AC_DEFUN(AM_CONDITIONAL,
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi])
+
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 5
+
+AC_DEFUN(AM_WITH_NLS,
+  [AC_MSG_CHECKING([whether NLS is requested])
+    dnl Default is enabled NLS
+    AC_ARG_ENABLE(nls,
+      [  --disable-nls           do not use Native Language Support],
+      USE_NLS=$enableval, USE_NLS=yes)
+    AC_MSG_RESULT($USE_NLS)
+    AC_SUBST(USE_NLS)
+
+    USE_INCLUDED_LIBINTL=no
+
+    dnl If we use NLS figure out what method
+    if test "$USE_NLS" = "yes"; then
+      AC_DEFINE(ENABLE_NLS)
+      AC_MSG_CHECKING([whether included gettext is requested])
+      AC_ARG_WITH(included-gettext,
+        [  --with-included-gettext use the GNU gettext library included here],
+        nls_cv_force_use_gnu_gettext=$withval,
+        nls_cv_force_use_gnu_gettext=no)
+      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If gettext or catgets are available (in this order) we
+        dnl use this.  Else we have to fall back to GNU NLS library.
+	dnl catgets is only used if permitted by option --with-catgets.
+	nls_cv_header_intl=
+	nls_cv_header_libgt=
+	CATOBJEXT=NONE
+
+	AC_CHECK_HEADER(libintl.h,
+	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
+	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
+	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
+
+	   if test "$gt_cv_func_gettext_libc" != "yes"; then
+	     AC_CHECK_LIB(intl, bindtextdomain,
+	       [AC_CACHE_CHECK([for gettext in libintl],
+		 gt_cv_func_gettext_libintl,
+		 [AC_CHECK_LIB(intl, gettext,
+		  gt_cv_func_gettext_libintl=yes,
+		  gt_cv_func_gettext_libintl=no)],
+		 gt_cv_func_gettext_libintl=no)])
+	   fi
+
+	   if test "$gt_cv_func_gettext_libc" = "yes" \
+	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
+	      AC_DEFINE(HAVE_GETTEXT)
+	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+	      if test "$MSGFMT" != "no"; then
+		AC_CHECK_FUNCS(dcgettext)
+		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+			       return _nl_msg_cat_cntr],
+		  [CATOBJEXT=.gmo
+		   DATADIRNAME=share],
+		  [CATOBJEXT=.mo
+		   DATADIRNAME=lib])
+		INSTOBJEXT=.mo
+	      fi
+	    fi
+	])
+
+        if test "$CATOBJEXT" = "NONE"; then
+	  AC_MSG_CHECKING([whether catgets can be used])
+	  AC_ARG_WITH(catgets,
+	    [  --with-catgets          use catgets functions if available],
+	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
+	  AC_MSG_RESULT($nls_cv_use_catgets)
+
+	  if test "$nls_cv_use_catgets" = "yes"; then
+	    dnl No gettext in C library.  Try catgets next.
+	    AC_CHECK_LIB(i, main)
+	    AC_CHECK_FUNC(catgets,
+	      [AC_DEFINE(HAVE_CATGETS)
+	       INTLOBJS="\$(CATOBJS)"
+	       AC_PATH_PROG(GENCAT, gencat, no)dnl
+	       if test "$GENCAT" != "no"; then
+		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
+		 if test "$GMSGFMT" = "no"; then
+		   AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
+		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
+		 fi
+		 AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+		 USE_INCLUDED_LIBINTL=yes
+		 CATOBJEXT=.cat
+		 INSTOBJEXT=.cat
+		 DATADIRNAME=lib
+		 INTLDEPS='$(top_builddir)/intl/libintl.a'
+		 INTLLIBS=$INTLDEPS
+		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+		 nls_cv_header_intl=intl/libintl.h
+		 nls_cv_header_libgt=intl/libgettext.h
+	       fi])
+	  fi
+        fi
+
+        if test "$CATOBJEXT" = "NONE"; then
+	  dnl Neither gettext nor catgets in included in the C library.
+	  dnl Fall back on GNU gettext library.
+	  nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions used to generate GNU NLS library.
+        INTLOBJS="\$(GETTOBJS)"
+        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
+        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+        AC_SUBST(MSGFMT)
+	USE_INCLUDED_LIBINTL=yes
+        CATOBJEXT=.gmo
+        INSTOBJEXT=.mo
+        DATADIRNAME=share
+	INTLDEPS='$(top_builddir)/intl/libintl.a'
+	INTLLIBS=$INTLDEPS
+	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
+        nls_cv_header_intl=intl/libintl.h
+        nls_cv_header_libgt=intl/libgettext.h
+      fi
+
+      dnl Test whether we really found GNU xgettext.
+      if test "$XGETTEXT" != ":"; then
+	dnl If it is no GNU xgettext we define it as : so that the
+	dnl Makefiles still can work.
+	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+	  : ;
+	else
+	  AC_MSG_RESULT(
+	    [found xgettext program is not GNU xgettext; ignore it])
+	  XGETTEXT=":"
+	fi
+      fi
+
+      # We need to process the po/ directory.
+      POSUB=po
+    else
+      DATADIRNAME=share
+      nls_cv_header_intl=intl/libintl.h
+      nls_cv_header_libgt=intl/libgettext.h
+    fi
+    AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
+    AC_OUTPUT_COMMANDS(
+     [case "$CONFIG_FILES" in *po/Makefile.in*)
+        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
+      esac])
+
+
+    # If this is used in GNU gettext we have to set USE_NLS to `yes'
+    # because some of the sources are only built for this goal.
+    if test "$PACKAGE" = gettext; then
+      USE_NLS=yes
+      USE_INCLUDED_LIBINTL=yes
+    fi
+
+    dnl These rules are solely for the distribution goal.  While doing this
+    dnl we only have to keep exactly one list of the available catalogs
+    dnl in configure.in.
+    for lang in $ALL_LINGUAS; do
+      GMOFILES="$GMOFILES $lang.gmo"
+      POFILES="$POFILES $lang.po"
+    done
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST(USE_INCLUDED_LIBINTL)
+    AC_SUBST(CATALOGS)
+    AC_SUBST(CATOBJEXT)
+    AC_SUBST(DATADIRNAME)
+    AC_SUBST(GMOFILES)
+    AC_SUBST(INSTOBJEXT)
+    AC_SUBST(INTLDEPS)
+    AC_SUBST(INTLLIBS)
+    AC_SUBST(INTLOBJS)
+    AC_SUBST(POFILES)
+    AC_SUBST(POSUB)
+  ])
+
+AC_DEFUN(AM_GNU_GETTEXT,
+  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+   AC_REQUIRE([AC_PROG_CC])dnl
+   AC_REQUIRE([AC_PROG_RANLIB])dnl
+   AC_REQUIRE([AC_ISC_POSIX])dnl
+   AC_REQUIRE([AC_HEADER_STDC])dnl
+   AC_REQUIRE([AC_C_CONST])dnl
+   AC_REQUIRE([AC_C_INLINE])dnl
+   AC_REQUIRE([AC_TYPE_OFF_T])dnl
+   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+   AC_REQUIRE([AC_FUNC_MMAP])dnl
+
+   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
+unistd.h sys/param.h])
+   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
+strdup __argz_count __argz_stringify __argz_next])
+
+   if test "${ac_cv_func_stpcpy+set}" != "set"; then
+     AC_CHECK_FUNCS(stpcpy)
+   fi
+   if test "${ac_cv_func_stpcpy}" = "yes"; then
+     AC_DEFINE(HAVE_STPCPY)
+   fi
+
+   AM_LC_MESSAGES
+   AM_WITH_NLS
+
+   if test "x$CATOBJEXT" != "x"; then
+     if test "x$ALL_LINGUAS" = "x"; then
+       LINGUAS=
+     else
+       AC_MSG_CHECKING(for catalogs to be installed)
+       NEW_LINGUAS=
+       for lang in ${LINGUAS=$ALL_LINGUAS}; do
+         case "$ALL_LINGUAS" in
+          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
+         esac
+       done
+       LINGUAS=$NEW_LINGUAS
+       AC_MSG_RESULT($LINGUAS)
+     fi
+
+     dnl Construct list of names of catalog files to be constructed.
+     if test -n "$LINGUAS"; then
+       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+     fi
+   fi
+
+   dnl The reference to <locale.h> in the installed <libintl.h> file
+   dnl must be resolved because we cannot expect the users of this
+   dnl to define HAVE_LOCALE_H.
+   if test $ac_cv_header_locale_h = yes; then
+     INCLUDE_LOCALE_H="#include <locale.h>"
+   else
+     INCLUDE_LOCALE_H="\
+/* The system does not provide the header <locale.h>.  Take care yourself.  */"
+   fi
+   AC_SUBST(INCLUDE_LOCALE_H)
+
+   dnl Determine which catalog format we have (if any is needed)
+   dnl For now we know about two different formats:
+   dnl   Linux libc-5 and the normal X/Open format
+   test -d intl || mkdir intl
+   if test "$CATOBJEXT" = ".cat"; then
+     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
+
+     dnl Transform the SED scripts while copying because some dumb SEDs
+     dnl cannot handle comments.
+     sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
+   fi
+   dnl po2tbl.sed is always needed.
+   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
+     $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
+
+   dnl In the intl/Makefile.in we have a special dependency which makes
+   dnl only sense for gettext.  We comment this out for non-gettext
+   dnl packages.
+   if test "$PACKAGE" = "gettext"; then
+     GT_NO="#NO#"
+     GT_YES=
+   else
+     GT_NO=
+     GT_YES="#YES#"
+   fi
+   AC_SUBST(GT_NO)
+   AC_SUBST(GT_YES)
+
+   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
+   dnl Try to locate is.
+   MKINSTALLDIRS=
+   if test -n "$ac_aux_dir"; then
+     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+   fi
+   if test -z "$MKINSTALLDIRS"; then
+     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+   fi
+   AC_SUBST(MKINSTALLDIRS)
+
+   dnl *** For now the libtool support in intl/Makefile is not for real.
+   l=
+   AC_SUBST(l)
+
+   dnl Generate list of files to be processed by xgettext which will
+   dnl be included in po/Makefile.
+   test -d po || mkdir po
+   if test "x$srcdir" != "x."; then
+     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+       posrcprefix="$srcdir/"
+     else
+       posrcprefix="../$srcdir/"
+     fi
+   else
+     posrcprefix="../"
+   fi
+   rm -f po/POTFILES
+   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+	< $srcdir/po/POTFILES.in > po/POTFILES
+  ])
+
+# Search path for a program which passes the given test.
+# Ulrich Drepper <drepper@cygnus.com>, 1996.
+#
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN(AM_PATH_PROG_WITH_TEST,
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+  /*)
+  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+  ;;
+  *)
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+  for ac_dir in ifelse([$5], , $PATH, [$5]); do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      if [$3]; then
+	ac_cv_path_$1="$ac_dir/$ac_word"
+	break
+      fi
+    fi
+  done
+  IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+  ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test -n "[$]$1"; then
+  AC_MSG_RESULT([$]$1)
+else
+  AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+# Ulrich Drepper <drepper@cygnus.com>, 1995.
+#
+# This file can be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+
+# serial 1
+
+AC_DEFUN(AM_LC_MESSAGES,
+  [if test $ac_cv_header_locale_h = yes; then
+    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+    if test $am_cv_val_LC_MESSAGES = yes; then
+      AC_DEFINE(HAVE_LC_MESSAGES)
+    fi
+  fi])
+