diff options
Diffstat (limited to 'arch/arm/lpc17xx/Drivers/include/lpc17xx_i2c.h')
| -rw-r--r-- | arch/arm/lpc17xx/Drivers/include/lpc17xx_i2c.h | 377 |
1 files changed, 377 insertions, 0 deletions
diff --git a/arch/arm/lpc17xx/Drivers/include/lpc17xx_i2c.h b/arch/arm/lpc17xx/Drivers/include/lpc17xx_i2c.h new file mode 100644 index 0000000..ad374f6 --- /dev/null +++ b/arch/arm/lpc17xx/Drivers/include/lpc17xx_i2c.h @@ -0,0 +1,377 @@ +/***********************************************************************//**
+ * @file lpc17xx_i2c.h
+ * @brief Contains all macro definitions and function prototypes
+ * support for I2C firmware library on LPC17xx
+ * @version 2.0
+ * @date 21. May. 2010
+ * @author NXP MCU SW Application Team
+ **************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+ **************************************************************************/
+
+/* Peripheral group ----------------------------------------------------------- */
+/** @defgroup I2C I2C
+ * @ingroup LPC1700CMSIS_FwLib_Drivers
+ * @{
+ */
+
+#ifndef LPC17XX_I2C_H_
+#define LPC17XX_I2C_H_
+
+/* Includes ------------------------------------------------------------------- */
+#include "LPC17xx.h"
+#include "lpc_types.h"
+
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+
+/* Private Macros ------------------------------------------------------------- */
+/** @defgroup I2C_Private_Macros I2C Private Macros
+ * @{
+ */
+
+/* --------------------- BIT DEFINITIONS -------------------------------------- */
+/*******************************************************************//**
+ * I2C Control Set register description
+ *********************************************************************/
+#define I2C_I2CONSET_AA ((0x04)) /*!< Assert acknowledge flag */
+#define I2C_I2CONSET_SI ((0x08)) /*!< I2C interrupt flag */
+#define I2C_I2CONSET_STO ((0x10)) /*!< STOP flag */
+#define I2C_I2CONSET_STA ((0x20)) /*!< START flag */
+#define I2C_I2CONSET_I2EN ((0x40)) /*!< I2C interface enable */
+
+/*******************************************************************//**
+ * I2C Control Clear register description
+ *********************************************************************/
+/** Assert acknowledge Clear bit */
+#define I2C_I2CONCLR_AAC ((1<<2))
+/** I2C interrupt Clear bit */
+#define I2C_I2CONCLR_SIC ((1<<3))
+/** START flag Clear bit */
+#define I2C_I2CONCLR_STAC ((1<<5))
+/** I2C interface Disable bit */
+#define I2C_I2CONCLR_I2ENC ((1<<6))
+
+/********************************************************************//**
+ * I2C Status Code definition (I2C Status register)
+ *********************************************************************/
+/* Return Code in I2C status register */
+#define I2C_STAT_CODE_BITMASK ((0xF8))
+
+/* I2C return status code definitions ----------------------------- */
+
+/** No relevant information */
+#define I2C_I2STAT_NO_INF ((0xF8))
+
+/* Master transmit mode -------------------------------------------- */
+/** A start condition has been transmitted */
+#define I2C_I2STAT_M_TX_START ((0x08))
+/** A repeat start condition has been transmitted */
+#define I2C_I2STAT_M_TX_RESTART ((0x10))
+/** SLA+W has been transmitted, ACK has been received */
+#define I2C_I2STAT_M_TX_SLAW_ACK ((0x18))
+/** SLA+W has been transmitted, NACK has been received */
+#define I2C_I2STAT_M_TX_SLAW_NACK ((0x20))
+/** Data has been transmitted, ACK has been received */
+#define I2C_I2STAT_M_TX_DAT_ACK ((0x28))
+/** Data has been transmitted, NACK has been received */
+#define I2C_I2STAT_M_TX_DAT_NACK ((0x30))
+/** Arbitration lost in SLA+R/W or Data bytes */
+#define I2C_I2STAT_M_TX_ARB_LOST ((0x38))
+
+/* Master receive mode -------------------------------------------- */
+/** A start condition has been transmitted */
+#define I2C_I2STAT_M_RX_START ((0x08))
+/** A repeat start condition has been transmitted */
+#define I2C_I2STAT_M_RX_RESTART ((0x10))
+/** Arbitration lost */
+#define I2C_I2STAT_M_RX_ARB_LOST ((0x38))
+/** SLA+R has been transmitted, ACK has been received */
+#define I2C_I2STAT_M_RX_SLAR_ACK ((0x40))
+/** SLA+R has been transmitted, NACK has been received */
+#define I2C_I2STAT_M_RX_SLAR_NACK ((0x48))
+/** Data has been received, ACK has been returned */
+#define I2C_I2STAT_M_RX_DAT_ACK ((0x50))
+/** Data has been received, NACK has been return */
+#define I2C_I2STAT_M_RX_DAT_NACK ((0x58))
+
+/* Slave receive mode -------------------------------------------- */
+/** Own slave address has been received, ACK has been returned */
+#define I2C_I2STAT_S_RX_SLAW_ACK ((0x60))
+
+/** Arbitration lost in SLA+R/W as master */
+#define I2C_I2STAT_S_RX_ARB_LOST_M_SLA ((0x68))
+/** Own SLA+W has been received, ACK returned */
+//#define I2C_I2STAT_S_RX_SLAW_ACK ((0x68))
+
+/** General call address has been received, ACK has been returned */
+#define I2C_I2STAT_S_RX_GENCALL_ACK ((0x70))
+
+/** Arbitration lost in SLA+R/W (GENERAL CALL) as master */
+#define I2C_I2STAT_S_RX_ARB_LOST_M_GENCALL ((0x78))
+/** General call address has been received, ACK has been returned */
+//#define I2C_I2STAT_S_RX_GENCALL_ACK ((0x78))
+
+/** Previously addressed with own SLV address;
+ * Data has been received, ACK has been return */
+#define I2C_I2STAT_S_RX_PRE_SLA_DAT_ACK ((0x80))
+/** Previously addressed with own SLA;
+ * Data has been received and NOT ACK has been return */
+#define I2C_I2STAT_S_RX_PRE_SLA_DAT_NACK ((0x88))
+/** Previously addressed with General Call;
+ * Data has been received and ACK has been return */
+#define I2C_I2STAT_S_RX_PRE_GENCALL_DAT_ACK ((0x90))
+/** Previously addressed with General Call;
+ * Data has been received and NOT ACK has been return */
+#define I2C_I2STAT_S_RX_PRE_GENCALL_DAT_NACK ((0x98))
+/** A STOP condition or repeated START condition has
+ * been received while still addressed as SLV/REC
+ * (Slave Receive) or SLV/TRX (Slave Transmit) */
+#define I2C_I2STAT_S_RX_STA_STO_SLVREC_SLVTRX ((0xA0))
+
+/** Slave transmit mode */
+/** Own SLA+R has been received, ACK has been returned */
+#define I2C_I2STAT_S_TX_SLAR_ACK ((0xA8))
+
+/** Arbitration lost in SLA+R/W as master */
+#define I2C_I2STAT_S_TX_ARB_LOST_M_SLA ((0xB0))
+/** Own SLA+R has been received, ACK has been returned */
+//#define I2C_I2STAT_S_TX_SLAR_ACK ((0xB0))
+
+/** Data has been transmitted, ACK has been received */
+#define I2C_I2STAT_S_TX_DAT_ACK ((0xB8))
+/** Data has been transmitted, NACK has been received */
+#define I2C_I2STAT_S_TX_DAT_NACK ((0xC0))
+/** Last data byte in I2DAT has been transmitted (AA = 0);
+ ACK has been received */
+#define I2C_I2STAT_S_TX_LAST_DAT_ACK ((0xC8))
+
+/** Time out in case of using I2C slave mode */
+#define I2C_SLAVE_TIME_OUT 0x10000UL
+
+/********************************************************************//**
+ * I2C Data register definition
+ *********************************************************************/
+/** Mask for I2DAT register*/
+#define I2C_I2DAT_BITMASK ((0xFF))
+
+/** Idle data value will be send out in slave mode in case of the actual
+ * expecting data requested from the master is greater than its sending data
+ * length that can be supported */
+#define I2C_I2DAT_IDLE_CHAR (0xFF)
+
+/********************************************************************//**
+ * I2C Monitor mode control register description
+ *********************************************************************/
+#define I2C_I2MMCTRL_MM_ENA ((1<<0)) /**< Monitor mode enable */
+#define I2C_I2MMCTRL_ENA_SCL ((1<<1)) /**< SCL output enable */
+#define I2C_I2MMCTRL_MATCH_ALL ((1<<2)) /**< Select interrupt register match */
+#define I2C_I2MMCTRL_BITMASK ((0x07)) /**< Mask for I2MMCTRL register */
+
+/********************************************************************//**
+ * I2C Data buffer register description
+ *********************************************************************/
+/** I2C Data buffer register bit mask */
+#define I2DATA_BUFFER_BITMASK ((0xFF))
+
+/********************************************************************//**
+ * I2C Slave Address registers definition
+ *********************************************************************/
+/** General Call enable bit */
+#define I2C_I2ADR_GC ((1<<0))
+/** I2C Slave Address registers bit mask */
+#define I2C_I2ADR_BITMASK ((0xFF))
+
+/********************************************************************//**
+ * I2C Mask Register definition
+ *********************************************************************/
+/** I2C Mask Register mask field */
+#define I2C_I2MASK_MASK(n) ((n&0xFE))
+
+/********************************************************************//**
+ * I2C SCL HIGH duty cycle Register definition
+ *********************************************************************/
+/** I2C SCL HIGH duty cycle Register bit mask */
+#define I2C_I2SCLH_BITMASK ((0xFFFF))
+
+/********************************************************************//**
+ * I2C SCL LOW duty cycle Register definition
+ *********************************************************************/
+/** I2C SCL LOW duty cycle Register bit mask */
+#define I2C_I2SCLL_BITMASK ((0xFFFF))
+
+/* I2C status values */
+#define I2C_SETUP_STATUS_ARBF (1<<8) /**< Arbitration false */
+#define I2C_SETUP_STATUS_NOACKF (1<<9) /**< No ACK returned */
+#define I2C_SETUP_STATUS_DONE (1<<10) /**< Status DONE */
+
+/*********************************************************************//**
+ * I2C monitor control configuration defines
+ **********************************************************************/
+#define I2C_MONITOR_CFG_SCL_OUTPUT I2C_I2MMCTRL_ENA_SCL /**< SCL output enable */
+#define I2C_MONITOR_CFG_MATCHALL I2C_I2MMCTRL_MATCH_ALL /**< Select interrupt register match */
+
+/* ---------------- CHECK PARAMETER DEFINITIONS ---------------------------- */
+/* Macros check I2C slave address */
+#define PARAM_I2C_SLAVEADDR_CH(n) ((n>=0) && (n<=3))
+
+/** Macro to determine if it is valid SSP port number */
+#define PARAM_I2Cx(n) ((((uint32_t *)n)==((uint32_t *)LPC_I2C0)) \
+|| (((uint32_t *)n)==((uint32_t *)LPC_I2C1)) \
+|| (((uint32_t *)n)==((uint32_t *)LPC_I2C2)))
+
+/* Macros check I2C monitor configuration type */
+#define PARAM_I2C_MONITOR_CFG(n) ((n==I2C_MONITOR_CFG_SCL_OUTPUT) || (I2C_MONITOR_CFG_MATCHALL))
+
+/**
+ * @}
+ */
+
+
+
+/* Public Types --------------------------------------------------------------- */
+/** @defgroup I2C_Public_Types I2C Public Types
+ * @{
+ */
+
+/**
+ * @brief I2C Own slave address setting structure + */
+typedef struct {
+ uint8_t SlaveAddrChannel; /**< Slave Address channel in I2C control,
+ should be in range from 0..3
+ */
+ uint8_t SlaveAddr_7bit; /**< Value of 7-bit slave address */
+ uint8_t GeneralCallState; /**< Enable/Disable General Call Functionality
+ when I2C control being in Slave mode, should be:
+ - ENABLE: Enable General Call function.
+ - DISABLE: Disable General Call function.
+ */
+ uint8_t SlaveAddrMaskValue; /**< Any bit in this 8-bit value (bit 7:1)
+ which is set to '1' will cause an automatic compare on
+ the corresponding bit of the received address when it
+ is compared to the SlaveAddr_7bit value associated with this
+ mask register. In other words, bits in SlaveAddr_7bit value
+ which are masked are not taken into account in determining
+ an address match
+ */
+} I2C_OWNSLAVEADDR_CFG_Type;
+
+
+/**
+ * @brief Master transfer setup data structure definitions
+ */
+typedef struct
+{
+ uint32_t sl_addr7bit; /**< Slave address in 7bit mode */
+ uint8_t* tx_data; /**< Pointer to Transmit data - NULL if data transmit
+ is not used */
+ uint32_t tx_length; /**< Transmit data length - 0 if data transmit
+ is not used*/
+ uint32_t tx_count; /**< Current Transmit data counter */
+ uint8_t* rx_data; /**< Pointer to Receive data - NULL if data receive
+ is not used */
+ uint32_t rx_length; /**< Receive data length - 0 if data receive is
+ not used */
+ uint32_t rx_count; /**< Current Receive data counter */
+ uint32_t retransmissions_max; /**< Max Re-Transmission value */
+ uint32_t retransmissions_count; /**< Current Re-Transmission counter */
+ uint32_t status; /**< Current status of I2C activity */
+ void (*callback)(void); /**< Pointer to Call back function when transmission complete
+ used in interrupt transfer mode */
+} I2C_M_SETUP_Type;
+
+
+/**
+ * @brief Slave transfer setup data structure definitions
+ */
+typedef struct
+{
+ uint8_t* tx_data;
+ uint32_t tx_length;
+ uint32_t tx_count;
+ uint8_t* rx_data;
+ uint32_t rx_length;
+ uint32_t rx_count;
+ uint32_t status;
+ void (*callback)(void);
+} I2C_S_SETUP_Type;
+
+/**
+ * @brief Transfer option type definitions
+ */
+typedef enum {
+ I2C_TRANSFER_POLLING = 0, /**< Transfer in polling mode */
+ I2C_TRANSFER_INTERRUPT /**< Transfer in interrupt mode */
+} I2C_TRANSFER_OPT_Type;
+
+
+/**
+ * @}
+ */
+
+
+/* Public Functions ----------------------------------------------------------- */
+/** @defgroup I2C_Public_Functions I2C Public Functions
+ * @{
+ */
+
+/* I2C Init/DeInit functions ---------- */
+void I2C_Init(LPC_I2C_TypeDef *I2Cx, uint32_t clockrate);
+void I2C_DeInit(LPC_I2C_TypeDef* I2Cx);
+//void I2C_SetClock (LPC_I2C_TypeDef *I2Cx, uint32_t target_clock);
+void I2C_Cmd(LPC_I2C_TypeDef* I2Cx, FunctionalState NewState);
+
+/* I2C transfer data functions -------- */
+Status I2C_MasterTransferData(LPC_I2C_TypeDef *I2Cx, \
+ I2C_M_SETUP_Type *TransferCfg, I2C_TRANSFER_OPT_Type Opt);
+Status I2C_SlaveTransferData(LPC_I2C_TypeDef *I2Cx, \
+ I2C_S_SETUP_Type *TransferCfg, I2C_TRANSFER_OPT_Type Opt);
+uint32_t I2C_MasterTransferComplete(LPC_I2C_TypeDef *I2Cx);
+uint32_t I2C_SlaveTransferComplete(LPC_I2C_TypeDef *I2Cx);
+
+
+void I2C_SetOwnSlaveAddr(LPC_I2C_TypeDef *I2Cx, I2C_OWNSLAVEADDR_CFG_Type *OwnSlaveAddrConfigStruct);
+uint8_t I2C_GetLastStatusCode(LPC_I2C_TypeDef* I2Cx);
+
+/* I2C Monitor functions ---------------*/
+void I2C_MonitorModeConfig(LPC_I2C_TypeDef *I2Cx, uint32_t MonitorCfgType, FunctionalState NewState);
+void I2C_MonitorModeCmd(LPC_I2C_TypeDef *I2Cx, FunctionalState NewState);
+uint8_t I2C_MonitorGetDatabuffer(LPC_I2C_TypeDef *I2Cx);
+BOOL_8 I2C_MonitorHandler(LPC_I2C_TypeDef *I2Cx, uint8_t *buffer, uint32_t size);
+
+/* I2C Interrupt handler functions ------*/
+void I2C_IntCmd (LPC_I2C_TypeDef *I2Cx, Bool NewState);
+void I2C_MasterHandler (LPC_I2C_TypeDef *I2Cx);
+void I2C_SlaveHandler (LPC_I2C_TypeDef *I2Cx);
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* LPC17XX_I2C_H_ */
+
+/**
+ * @}
+ */
+
+/* --------------------------------- End Of File ------------------------------ */
|